Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. RomBOOT AT91Bootstrap 3.7.2-rc2-dirty (Tue 14 Apr 02:17:07 BST 2015) NAND: ONFI not supported NAND: Manufacturer ID: 0xec Chip ID: 0xda NAND: Disable On-Die ECC NAND: Press the recovery button (BP4) to recovery NAND: Using Software ECC NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x21f00000 NAND: Done to load image U-Boot 2015.01 (Apr 14 2015 - 16:45:04) CPU: AT91SAM9G20 Crystal frequency: 18.432 MHz CPU clock : 396.288 MHz Master clock : 132.096 MHz DRAM: 64 MiB WARNING: Caches not enabled NAND: 256 MiB MMC: mci: 0 In: serial Out: serial Err: serial Net: macb0 Hit any key to stop autoboot: 3  0 U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp macb0: Starting autonegotiation... macb0: Autonegotiation complete macb0: link up, 100Mbps full-duplex (lpa: 0xc1e1) BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 *** Unhandled DHCP Option in OFFER/ACK: 42 *** Unhandled DHCP Option in OFFER/ACK: 42 DHCP client bound to address 192.168.56.25 (3792 ms) U-Boot> setenv serverip 192.168.56.230 setenv serverip 192.168.56.230 U-Boot> tftp 0x22100000 138148/tftp-deploy-9tkcity7/kernel/zImage tftp 0x22100000 138148/tftp-deploy-9tkcity7/kernel/zImage macb0: link up, 100Mbps full-duplex (lpa: 0xc1e1) Using macb0 device TFTP from server 192.168.56.230; our IP address is 192.168.56.25 Filename '138148/tftp-deploy-9tkcity7/kernel/zImage'. Load address: 0x22100000 Loading: *######################################################################################################################################################################################################################################################################################################################################################################## 1.3 MiB/s done Bytes transferred = 5354448 (51b3d0 hex) U-Boot> tftp 0x23000000 138148/tftp-deploy-9tkcity7/ramdisk/ramdisk.cpio.gz.uboot tftp 0x23000000 138148/tftp-deploy-9tkcity7/ramdisk/ramdisk.cpio.gz.uboot macb0: link up, 100Mbps full-duplex (lpa: 0xc1e1) Using macb0 device TFTP from server 192.168.56.230; our IP address is 192.168.56.25 Filename '138148/tftp-deploy-9tkcity7/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x23000000 Loading: *################################################################################################################################################################################################################################################################################################################################## 1.2 MiB/s done Bytes transferred = 4788152 (490fb8 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x22000000 138148/tftp-deploy-9tkcity7/dtb/at91sam9g20ek.dtb tftp 0x22000000 138148/tftp-deploy-9tkcity7/dtb/at91sam9g20ek.dtb macb0: link up, 100Mbps full-duplex (lpa: 0xc1e1) Using macb0 device TFTP from server 192.168.56.230; our IP address is 192.168.56.25 Filename '138148/tftp-deploy-9tkcity7/dtb/at91sam9g20ek.dtb'. Load address: 0x22000000 Loading: *## 1.2 MiB/s done Bytes transferred = 20023 (4e37 hex) U-Boot> setenv bootargs ' root=/dev/nfs rw nfsroot=192.168.56.230:/var/lib/lava/dispatcher/tmp/138148/extract-nfsrootfs-kdtbtwfs,tcp,hard,vers=3 cma=0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs ' root=/dev/nfs rw nfsroot=192.168.56.230:/var/lib/lava/dispatcher/tmp/138148/extract-nfsrootfs-kdtbtwfs,tcp,hard,vers=3 cma=0 console_msg_format=syslog earlycon ip=dhcp' U-Boot> bootz 0x22100000 0x23000000 0x22000000 bootz 0x22100000 0x23000000 0x22000000 Kernel image @ 0x22100000 [ 0x000000 - 0x51b3d0 ] ## Loading init Ramdisk from Legacy Image at 23000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 4788088 Bytes = 4.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 22000000 Booting using the fdt blob at 0x22000000 Using Device Tree in place at 22000000, end 22007e36 Starting kernel ... <6>Booting Linux on physical CPU 0x0 <5>Linux version 4.19.269-cip85-rt28 (KernelCI@build-j876887-arm-gcc-10-multi-v5-defconfig-557xx) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 Wed Jan 18 19:56:53 UTC 2023 <6>CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f <6>CPU: VIVT data cache, VIVT instruction cache <6>OF: fdt: Machine model: Atmel at91sam9g20ek <4>Malformed early option 'earlycon' <6>Memory policy: Data cache writeback <6>Built 1 zonelists, mobility grouping on. Total pages: 16256 <5>Kernel command line: root=/dev/nfs rw nfsroot=192.168.56.230:/var/lib/lava/dispatcher/tmp/138148/extract-nfsrootfs-kdtbtwfs,tcp,hard,vers=3 cma=0 console_msg_format=syslog earlycon ip=dhcp <6>Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) <6>Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) <6>Memory: 48764K/65536K available (7742K kernel code, 343K rwdata, 2084K rodata, 316K init, 687K bss, 16772K reserved, 0K cma-reserved, 0K highmem) <5>Virtual kernel memory layout: <5> vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5> DTCM : 0xfffe8000 - 0xfffe8000 ( 0 kB) <5> ITCM : 0xfffe0000 - 0xfffe0000 ( 0 kB) <5> fixmap : 0xffc00000 - 0xfff00000 (3072 kB) <5> vmalloc : 0xc4800000 - 0xff800000 ( 944 MB) <5> lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) <5> pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5> modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5> .text : 0x(ptrval) - 0x(ptrval) (7744 kB) <5> .init : 0x(ptrval) - 0x(ptrval) ( 316 kB) <5> .data : 0x(ptrval) - 0x(ptrval) ( 344 kB) <5> .bss : 0x(ptrval) - 0x(ptrval) ( 687 kB) <6>SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>clocksource: pit: mask: 0xfffffff max_cycles: 0xfffffff, max_idle_ns: 14468723050 ns <6>Console: colour dummy device 80x30 <6>console [tty0] enabled <6>sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns <6>Calibrating delay loop... 197.01 BogoMIPS (lpj=985088) <6>pid_max: default: 32768 minimum: 301 <6>Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) <6>Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) <6>CPU: Testing write buffer coherency: ok <6>Setting up static identity map for 0x20008400 - 0x2000847c <6>devtmpfs: initialized <6>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>futex hash table entries: 256 (order: -1, 3072 bytes) <6>pinctrl core: initialized pinctrl subsystem <6>NET: Registered protocol family 16 <6>DMA: preallocated 256 KiB pool for atomic coherent allocations <6>cpuidle: using governor menu <6>AT91: PM: standby: standby, suspend: ulp0 <6>gpio-at91 fffff400.gpio: at address (ptr: at address (ptrval) <6>gpio-at91 fffff800.gpio: at address (ptrval) <6>pinctrl-at91 ahb:apb:pinctrl@fffff400: initialized AT91 pinctrl driver <6>clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 115749784805 ns <6>AT91: Detected SoC: at91sam9g20, revision 1 <6>vgaarb: loaded <5>SCSI subsystem initialized <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb <6>videodev: Linux video capture interface: v2.00 <6>pps_core: LinuxPPS API ver. 1 registered <6>pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>PTP clock support registered <6>Advanced Linux Sound Architecture Driver Initialized. <6>clocksource: Switched to clocksource tcb_clksrc <6>NET: Registered protocol family 2 <6>IP idents hash table entries: 2048 (order: 2, 16384 bytes) <6>tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) <6>TCP established hash table entries: 1024 (order: 0, 4096 bytes) <6>TCP bind hash table entries: 1024 (order: 0, 4096 bytes) <6>TCP: Hash tables configured (established 1024 bind 1024) <6>UDP hash table entries: 256 (order: 0, 4096 bytes) <6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) <6>NET: Registered protocol family 1 <6>RPC: Registered named UNIX socket transport module. <6>RPC: Registered udp transport module. <6>RPC: Registered tcp transport module. <6>RPC: Registered tcp NFSv4.1 backchannel transport module. <6>Unpacking initramfs... <6>Freeing initrd memory: 4676K <5>Initialise system trusted keyrings <6>workingset: timestamp_bits=30 max_order=14 bucket_order=0 <6>jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. <5>Key type asymmetric registered <5>Asymmetric key parser 'x509' registered <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>io scheduler noop registered <6>io scheduler deadline registered(default) <6>io scheduler mq-deadline registered <6>io scheduler kyber registered <6>Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled <6>fffff200.serial: ttyAT0 at MMIO 0xfffff200 (irq = 16, base_baud = 8256000) is a ATMEL_SERIAL <6>console [ttyAT0] enabled <6>fffb0000.serial: ttyAT1 at MMIO 0xfffb0000 (irq = 26, base_baud = 8256000) is a ATMEL_SERIAL <6>fffb4000.serial: ttyAT2 at MMIO 0xfffb4000 (irq = 27, base_baud = 8256000) is a ATMEL_SERIAL <6>loop: module loaded <6>Davicom DM9161A fffc4000.ethernet-ffffffff:00: attached PHY driver [Davicom DM9161A] (mii_bus:phy_addr=fffc4000.ethernet-ffffffff:00, irq=POLL) <6>macb fffc4000.ethernet eth0: Cadence MACB rev 0x0001010c at 0xfffc4000 irq 28 (a6:72:4e:7e:7a:f8) <6>libertas_sdio: Libertas SDIO driver <6>libertas_sdio: Copyright Pierre Ossman <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>ehci-pci: EHCI PCI platform driver <6>ehci-orion: EHCI orion driver <6>ehci-atmel: EHCI Atmel driver <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>ohci-pci: OHCI PCI platform driver <6>ohci-atmel: OHCI Atmel driver <6>at91_ohci 500000.ohci: USB Host Controller <6>at91_ohci 500000.ohci: new USB bus registered, assigned bus number 1 <6>at91_ohci 500000.ohci: irq 33, io mem 0x00500000 <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 2 ports detected <6>usbcore: registered new interface driver usb-storage <6>usbcore: registered new interface driver ums-datafab <6>usbcore: registered new interface driver ums-freecom <6>usbcore: registered new interface driver ums-jumpshot <6>usbcore: registered new interface driver ums-sddr09 <6>usbcore: registered new interface driver ums-sddr55 <6>i2c /dev entries driver <6>at91-reset fffffd00.rstc: Starting after general reset <3>at91_wdt fffffd40.watchdog: watchdog is disabled <4>at91_wdt: probe of fffffd40.watchdog failed with error -22 <6>atmel_mci fffa8000.mmc: version: 0x210 <6>atmel_mci fffa8000.mmc: using PDC <6>atmel_mci fffa8000.mmc: Atmel MCI controller at 0xfffa8000 irq 30, 1 slots <6>usbcore: registered new interface driver usbhid <6>usbhid: USB HID core driver <6>nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda <6>nand: Samsung NAND 256MiB 3,3V 8-bit <6>nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 <6>Bad block table found at page 131008, version 0x01 <6>Bad block table found at page 130944, version 0x01 <6>nand_read_bbt: bad block at 0x000006120000 <6>nand_read_bbt: bad block at 0x00000d880000 <5>8 fixed-partitions partitions found on MTD device atmel_nand <5>Creating 8 MTD partitions on \"atmel_nand\": <5>0x000000000000-0x000000020000 : \"at91bootstrap\" <5>0x000000020000-0x000000060000 : \"barebox\" <5>0x000000060000-0x000000080000 : \"bareboxenv\" <5>0x000000080000-0x0000000a0000 : \"bareboxenv2\" <5>0x0000000a0000-0x0000000c0000 : \"oftree\" <5>0x0000000c0000-0x0000004c0000 : \"kernel\" <5>0x0000004c0000-0x000007cc0000 : \"rootfs\" <5>0x000007cc0000-0x000010000000 : \"data\" <6>oprofile: no performance counters <6>oprofile: using timer interrupt. <6>NET: Registered protocol family 10 <6>Segment Routing with IPv6 <6>sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>NET: Registered protocol family 17 <6>lib80211: common routines for IEEE802.11 drivers <5>Loading compiled-in X.509 certificates <6>input: gpio_keys as /devices/platform/gpio_keys/input/input0 <6>hctosys: unable to open rtc device (rtc0) <6>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready <6>macb fffc4000.ethernet eth0: link up (100/Full) <6>IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>Sending DHCP requests .., OK <6>IP-Config: Got DHCP answer from 192.168.56.254, my address is 192.168.56.25 <6>IP-Config: Complete: <6> device=eth0, hwaddr=a6:72:4e:7e:7a:f8, ipaddr=192.168.56.25, mask=255.255.255.0, gw=192.168.56.254 <6> host=192.168.56.25, domain=mayfield.sirena.org.uk, nis-domain=(none) <6> bootserver=192.168.56.254, rootserver=192.168.56.230, rootpath= <6> nameserver0=192.168.56.254 <6> ntpserver0=50.205.244.22, ntpserver1=85.199.214.99 <5>cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <6>ALSA device list: <6> No soundcards found. <4>platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>cfg80211: failed to load regulatory.db <6>Freeing unused kernel memory: 316K <4>This architecture does not have kernel memory protection. <6>Run /init as init process Loading, please wait... Starting version 247.3-7+deb11u1 006 <6>ssc fffbc000.ssc: Atmel SSC device at 0x(ptrval) (irq 31) <6>iio iio:device0: Resolution used: 10 bits <6>iio iio:device0: not support touchscreen in the adc compatible string. <6>rtc-at91sam9 fffffd20.rtc: rtc core: registered fffffd20.rtc as rtc0 <4>rtc-at91sam9 fffffd20.rtc: rtc0: SET TIME! <3>at91sam9g20ek-audio sound: ASoC: CODEC DAI wm8731-hifi not registered <3>at91sam9g20ek-audio sound: snd_soc_register_card() failed Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done. Begin: Running /scripts/nfs-premount ... Waiting up to 60 secs for any ethernet to become available Device /sys/class/net/eth0 found done. IP-Config: eth0 hardware address a6:72:4e:7e:7a:f8 mtu 1500 DHCP IP-Config: eth0 complete (dhcp from 192.168.56.254): address: 192.168.56.25 broadcast: 192.168.56.255 netmask: 255.255.255.0 gateway: 192.168.56.254 dns0 : 192.168.56.254 dns1 : 0.0.0.0 domain : mayfield.sirena.org.uk rootserver: 192.168.56.254 rootpath: filename : om ... done. Begin: Running /scripts/init-bottom ... done. <30>systemd[1]: System time before build time, advancing clock. <27>systemd[1]: Failed to find module 'autofs4' <3>cgroup: cgroup2: unknown option \"memory_recursiveprot\" <30>systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) <30>systemd[1]: Detected architecture arm. Welcome to [1mDebian GNU/Linux 11 (bullseye)[0m! <30>systemd[1]: Set hostname to . <30>systemd[1]: Queued start job for default target Graphical Interface. <5>random: systemd: uninitialized urandom read (16 bytes read) <28>systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <28>systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <30>systemd[1]: Created slice system-getty.slice. [[0;32m OK [0m] Created slice [0;1;39msystem-getty.slice[0m. <5>random: systemd: uninitialized urandom read (16 bytes read) <30>systemd[1]: Created slice system-modprobe.slice. [[0;32m OK [0m] Created slice [0;1;39msystem-modprobe.slice[0m. <5>random: systemd: uninitialized urandom read (16 bytes read) <30>systemd[1]: Created slice system-serial\x2dgetty.slice. [[0;32m OK [0m] Created slice [0;1;39msystem-serial\x2dgetty.slice[0m. <30>systemd[1]: Created slice User and Session Slice. [[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m. <30>systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [[0;32m OK [0m] Started [0;1;39mDispatch Password …ts to Console Directory Watch[0m. <30>systemd[1]: Started Forward Password Requests to Wall Directory Watch. [[0;32m OK [0m] Started [0;1;39mForward Password R…uests to Wall Directory Watch[0m. <30>systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <30>systemd[1]: Reached target Local Encrypted Volumes. [[0;32m OK [0m] Reached target [0;1;39mLocal Encrypted Volumes[0m. <30>systemd[1]: Reached target Paths. [[0;32m OK [0m] Reached target [0;1;39mPaths[0m. <30>systemd[1]: Reached target RK [0m] Reached target [0;1;39mRemote File Systems[0m. <30>systemd[1]: Reached target Slices. [[0;32m OK [0m] Reached target [0;1;39mSlices[0m. <30>systemd[1]: Reached target Swap. [[0;32m OK [0m] Reached target [0;1;39mSwap[0m. <30>systemd[1]: Listening on initctl Compatibility Named Pipe. [[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m. <30>systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <30>systemd[1]: Listening on Journal Socket (/dev/log). [[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m. <30>systemd[1]: Listening on Journal Socket. [[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m. <30>systemd[1]: Listening on Network Service Netlink Socket. [[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlink Socket[0m. <30>systemd[1]: Listening on udev Control Socket. [[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m. <30>systemd[1]: Listening on udev Kernel Socket. [[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m. <30>systemd[1]: Condition check resulted in Huge Pages File System being skipped. <30>systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped. <30>systemd[1]: Mounting Kernel Debug File System... Mounting [0;1;39mKernel Debug File System[0m... <5>random: crng init done <5>random: 15 urandom warning(s) miss<30>systemd[1]: Condition check resulted in Kernel Trace File System being skipped. <30>systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped. <30>systemd[1]: Starting Load Kernel Module configfs... Starting [0;1;39mLoad Kernel Module configfs[0m... <30>systemd[1]: Starting Load Kernel Module drm... Starting [0;1;39mLoad Kernel Module drm[0m... <30>systemd[1]: Starting Load Kernel Module fuse... Starting [0;1;39mLoad Kernel Module fuse[0m... <30>systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <30>systemd[1]: Starting Journal Service... Starting [0;1;39mJournal Service[0m... <30>systemd[1]: Starting Load Kernel Modules... Starting [0;1;39mLoad Kernel Modules[0m... <30>systemd[1]: Starting Remount Root and Kernel File Systems... Starting [0;1;39mRemount Root and Kernel File Systems[0m... <30>systemd[1]: Starting Coldplug All udev Devices... Starting [0;1;39mColdplug All udev Devices[0m... <30>systemd[1]: Mounted Kernel Debug File System. [[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m. <30>systemd[1]: modprobe@configfs.service: Succeeded. <30>systemd[1]: Finished Load Kernel Module configfs. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m. <30>systemd[1]: modprobe@drm.service: Succeeded. <30>systemd[1]: Finished Load Kernel Module drm. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m. <30>systemd[1]: modprobe@fuse.service: Succeeded. <30>systemd[1]: Finished Load Kernel Module fuse. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m. <30>systemd[1]: Condition check resulted in FUSE Control File System being skipped. <30>systemd[1]: Condition check resulted in Kernel Configuration File System being skipped. <30>systemd[1]: Finished Remount Root and Kernel File Systems. [[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m. <30>systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. <30>systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. <30>systemd[1]: Starting Load/Save Random Seed... Starting [0;1;39mLoad/Save Random Seed[0m... <30>systemd[1]: Starting Create System Users... Starting [0;1;39mCreate System Users[0m... <30>systemd[1]: Finished Load Kernel Modules. [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Modules[0m. <30>systemd[1]: Starting Apply Kernel Variables... Starting [0;1;39mApply Kernel Variables[0m... <30>systemd[1]: Started Journal Service. [[0;32m OK [0m] Started [0;1;39mJournal Service[0m. [[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m. [[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m. Starting [0;1;39mFlush Journal to Persistent Storage[0m... [[0;32m OK [0m] Finished [0;1;39mCreate System Users[0m. Starting [0;1;39mCreate Static Device Nodes in /dev[0m... <46>systemd-journald[999]: Received client request to flush runtime journal. [[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m. [[0;32m OK [0m] Reached target [0;1;39mLocal File Systems (Pre)[0m. [[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m. Starting [0;1;39mRule-based Manage…for Device Events and Files[0m... [[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m. [[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m. Starting [0;1;39mCreate Volatile Files and Directories[0m... [[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m. Starting [0;1;39mNetwork Service[0m... [[0m[0;31m* [0m] (1 of 3) A start job is running for /dev/ttyAT0 (10s / 1min 30s) M[K[[0;1;31m*[0m[0;31m* [0m] (1 of 3) A start job is running for /dev/ttyAT0 (11s / 1min 30s) M[K[[0;31m*[0;1;31m*[0m[0;31m* [0m] (1 of 3) A start job is running for /dev/ttyAT0 (11s / 1min 30s) M[K[[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m. [K Starting [0;1;39mNetwork Time Synchronization[0m... Starting [0;1;39mUpdate UTMP about System Boot/Shutdown[0m... [[0;32m OK [0m] Started [0;1;39mNetwork Service[0m. [ [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 3) A start job is running for…tem Boot/Shutdown (17s / no limit) M[K[[0;32m OK [0m] Started [0;1;39mNetwork Time Synchronization[0m. [K[[0;32m OK [0m] Finished [0;1;39mUpdate UTMP about System Boot/Shutdown[0m. [[0;32m OK [0m] Found device [0;1;39m/dev/ttyAT0[0m. [[0;32m OK [0m] Reached target [0;1;39mSystem Initialization[0m. [[0;32m OK [0m] Started [0;1;39mDaily Cleanup of Temporary Directories[0m. [[0;32m OK [0m] Reached target [0;1;39mSystem Time Set[0m. [[0;32m OK [0m] Reached target [0;1;39mSystem Time Synchronized[0m. [[0;32m OK [0m] Started [0;1;39mDaily apt download activities[0m. [[0;32m OK [0m] Started [0;1;39mDaily apt upgrade and clean activities[0m. [[0;32m OK [0m] Started [0;1;39mPeriodic ext4 Onli…ata Check for All Filesystems[0m. [[0;32m OK [0m] Started [0;1;39mDiscard unused blocks once a week[0m. [[0;32m OK [0m] Reached target [0;1;39mTimers[0m. [[0;32m OK [0m] Reached target [0;1;39mHardware activated USB gadget[0m. [[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message B[[0;32m OK [0m] Reached target [0;1;39mSockets[0m. [[0;32m OK [0m] Reached target [0;1;39mBasic System[0m. [[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0m. Starting [0;1;39mRemove Stale Onli…t4 Metadata Check Snapshots[0m... Starting [0;1;39mUser Login Management[0m... Starting [0;1;39mNetwork Name Resolution[0m... [ [0;31m*[0;1;31m*[0m[0;31m* [0m] (2 of 3) A start job is running for…a Check Snapshots (23s / no limit) M[K[ [0;31m*[0;1;31m*[0m[0;31m*[0m] (2 of 3) A start job is running for…a Check Snapshots (23s / no limit) M[K[[0;32m OK [0m] Started [0;1;39mUser Login Management[0m. [K[[0;32m OK [0m] Started [0;1;39mNetwork Name Resolution[0m. [[0;32m OK [0m] Reached target [0;1;39mNetwork[0m. [[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m. Starting [0;1;39mPermit User Sessions[0m... [[0;32m OK [0m] Finished [0;1;39mPermit User Sessions[0m. [[0;32m OK [0m] Started [0;1;39mGetty on tty1[0m. [[0;32m OK [0m] Started [0;1;39mSerial Getty on ttyAT0[0m. [[0;32m OK [0m] Reached target [0;1;39mLogin Prompts[0m. [[0;32m OK [0m] Reached target [0;1;39mMulti-User System[0m. [[0;32m OK [0m] Finished [0;1;39mRemove Stale Onli…ext4 Metadata Check Snapshots[0m. [[0;32m OK [0m] Reached target [0;1;39mGraphical Interface[0m. Starting [0;1;39mUpdate UTMP about System Runlevel Changes[0m... [[0;32m OK [0m] Finished [0;1;39mUpdate UTMP about System Runlevel Changes[0m. Debian GNU/Linux 11 debian-bullseye-armel ttyAT0 debian-bullseye-armel login: root (automatic login) Linux debian-bullseye-armel 4.19.269-cip85-rt28 #1 Wed Jan 18 19:56:53 UTC 2023 armv5tejl The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. / # / # export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/138148/extract-nfsrootfs-kdtbtwfs' export NFS_ROOTFS='/var/lib/lava/dispatcher/tmp/138148/extract-nfsrootfs-kdtbtwfs' / # export NFS_SERVER_IP='192.168.56.230' export NFS_SERVER_IP='192.168.56.230' / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-138148/environment . /lava-138148/environment / # /lava-138148/bin/lava-test-runner /lava-138148/0 /lava-138148/bin/lava-test-runner /lava-138148/0 + export TESTRUN_ID=0_dmesg + cd /lava-138148/0/tests/0_dmesg + cat uuid + UUID=138148<8> _1.6.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8> <8> <8> + set +x<8> # / # #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-138148/environment / # . /lava-138148/environment/lava-138148/bin/lava-test-runner /lava-138148/1 / # /lava-138148/bin/lava-test-runner /lava-138148/1 + export TESTRUN_ID=1_bootrr + cd /lava-138148/1/tests/1_bootrr + cat uuid + UUID=138148<8> _1.6.2.4.5 + set +x + export PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-138148/1/../bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto sound /lava-138148/1/../bin/lava-test-case <8> /lava-138148/1/../bin/lava-test-case <8> /lava-138148/1/../bin/lava-test-case <8> + set +x<8> / #