connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/994534/tftp-deploy-wxl3_a20/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/994534/tftp-deploy-wxl3_a20/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/994534/tftp-deploy-wxl3_a20/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/994534/tftp-deploy-wxl3_a20/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/994534/tftp-deploy-wxl3_a20/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/994534/tftp-deploy-wxl3_a20/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address d2:39:2c:90:80:7f T eth0: DHCP client bound to address 10.8.254.64 Loading ARM Linux zImage '/mnt/tftp/994534/tftp-deploy-wxl3_a20/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x1377c000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/994534/tftp-deploy-wxl3_a20/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x189fbec8 Loading devicetree from '/mnt/tftp/994534/tftp-deploy-wxl3_a20/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x1377c000, initrd at 0x18000000, oftree at 0x189fc000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.31 (KernelCI@build-j142993-arm-gcc-10-imx-v6-v7-defconfig-zqrfg) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Sun Jul 9 12:09:33 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x8a000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 17 pages/cpu s38388 r8192 d23052 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1971292K/2097152K available (15360K kernel code, 2191K rwdata, 5092K rodata, 1024K init, 6673K bss, 60324K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000026] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002128] Console: colour dummy device 80x30 [ 0.002207] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002218] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002228] ... MAX_LOCK_DEPTH: 48 [ 0.002238] ... MAX_LOCKDEP_KEYS: 8192 [ 0.002247] ... CLASSHASH_SIZE: 4096 [ 0.002256] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002265] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002275] ... CHAINHASH_SIZE: 32768 [ 0.002284] memory used by lock dependency info: 4061 kB [ 0.002294] memory used for stack traces: 2112 kB [ 0.002304] per task-struct memory footprint: 1536 bytes [ 0.002410] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.002439] pid_max: default: 32768 minimum: 301 [ 0.003076] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003110] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.007091] CPU: Testing write buffer coherency: ok [ 0.007271] CPU0: Spectre v2: using BPIALL workaround [ 0.008671] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.012033] cblist_init_generic: Setting adjustable number of callback queues. [ 0.012142] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.012504] Running RCU-tasks wait API self tests [ 0.012834] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.013470] Callback from call_rcu_tasks_trace() invoked. [ 0.013714] rcu: Hierarchical SRCU implementation. [ 0.013727] rcu: Max phase no-delay instances is 1000. [ 0.016560] smp: Bringing up secondary CPUs ... [ 0.019868] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.019892] CPU1: Spectre v2: using BPIALL workaround [ 0.023317] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.023340] CPU2: Spectre v2: using BPIALL workaround [ 0.026010] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.026029] CPU3: Spectre v2: using BPIALL workaround [ 0.026449] smp: Brought up 1 node, 4 CPUs [ 0.026468] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.026484] CPU: All CPU(s) started in SVC mode. [ 0.029338] devtmpfs: initialized [ 0.065548] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.067844] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.067909] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.072180] pinctrl core: initialized pinctrl subsystem [ 0.078407] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.101155] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.106160] thermal_sys: Registered thermal governor 'step_wise' [ 0.106494] cpuidle: using governor menu [ 0.106751] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.128315] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2800000 [ 0.128627] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 [ 0.181994] platform 21dc000.mipi: Fixed dependency cycle(s) with /soc/bus@2100000/i2c@21a4000/camera@3c [ 0.203853] No ATAGs? [ 0.204363] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.204411] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.209658] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.254237] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.321914] SCSI subsystem initialized [ 0.323730] usbcore: registered new interface driver usbfs [ 0.323966] usbcore: registered new interface driver hub [ 0.324120] usbcore: registered new device driver usb [ 0.324491] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 0.325290] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 0.325766] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 0.326398] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 0.330574] i2c i2c-0: IMX I2C adapter registered [ 0.336064] i2c i2c-1: IMX I2C adapter registered [ 0.342331] i2c i2c-2: IMX I2C adapter registered [ 0.342942] mc: Linux media interface: v0.10 [ 0.343166] videodev: Linux video capture interface: v2.00 [ 0.343747] pps_core: LinuxPPS API ver. 1 registered [ 0.343764] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.343825] PTP clock support registered [ 0.346440] Advanced Linux Sound Architecture Driver Initialized. [ 0.351609] Bluetooth: Core ver 2.22 [ 0.351731] NET: Registered PF_BLUETOOTH protocol family [ 0.351745] Bluetooth: HCI device and connection manager initialized [ 0.351855] Bluetooth: HCI socket layer initialized [ 0.351886] Bluetooth: L2CAP socket layer initialized [ 0.352038] Bluetooth: SCO socket layer initialized [ 0.355143] vgaarb: loaded [ 1.400062] clocksource: Switched to clocksource mxc_timer1 [ 1.404201] VFS: Disk quotas dquot_6.6.0 [ 1.404369] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.441636] NET: Registered PF_INET protocol family [ 1.442730] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.446049] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear) [ 1.446168] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.446701] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.447026] TCP bind hash table entries: 8192 (order: 7, 655360 bytes, linear) [ 1.449372] TCP: Hash tables configured (established 8192 bind 8192) [ 1.450248] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 1.450528] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 1.451213] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.453500] RPC: Registered named UNIX socket transport module. [ 1.453545] RPC: Registered udp transport module. [ 1.453559] RPC: Registered tcp transport module. [ 1.453571] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.455364] PCI: CLS 0 bytes, default 64 [ 1.457040] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. [ 1.458298] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.458320] Trying to unpack rootfs image as initramfs... [ 1.465803] Initialise system trusted keyrings [ 1.466920] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.491414] NFS: Registering the id_resolver key type [ 1.491629] Key type id_resolver registered [ 1.491673] Key type id_legacy registered [ 1.491972] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.492083] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.492278] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.493706] fuse: init (API version 7.37) [ 1.589191] Key type asymmetric registered [ 1.589385] Asymmetric key parser 'x509' registered [ 1.590204] bounce: pool size: 64 pages [ 1.590724] io scheduler mq-deadline registered [ 1.590749] io scheduler kyber registered [ 1.612118] mxs-dma 110000.dma-apbh: initialized [ 1.627438] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1 [ 1.628397] pfuze100-regulator 2-0008: FAB: 0, FIN: 0 [ 1.628419] pfuze100-regulator 2-0008: pfuze100 found. [ 1.664054] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 268, base_baud = 5000000) is a IMX [ 2.611903] printk: console [ttymxc0] enabled [ 2.621064] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 269, base_baud = 5000000) is a IMX [ 2.645651] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 2.684638] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 2.691465] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 2.698009] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 2.703821] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 2.712334] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 2.718595] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 2.724857] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 2.734176] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 2.754522] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.766568] Stack Depot allocating hash table of 65536 entries with kvcalloc [ 2.776759] Freeing initrd memory: 10224K [ 2.779055] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.788976] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.797117] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 2.805106] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 2.813749] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 2.824818] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.834808] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 2.843197] imx-ipuv3 2800000.ipu: IPUv3H probed [ 2.884511] brd: module loaded [ 2.918076] loop: module loaded [ 2.924096] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.932303] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.940430] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.948639] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.956860] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 2.964942] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 2.972673] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 2.983963] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.991059] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.999876] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 3.013968] scsi host0: ahci-imx [ 3.018897] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 282 [ 3.040164] CAN device driver interface [ 3.051959] pps pps0: new PPS source ptp0 [ 3.102030] fec 2188000.ethernet eth0: registered PHC device 0 [ 3.110311] usbcore: registered new interface driver r8152 [ 3.115935] usbcore: registered new interface driver lan78xx [ 3.121951] usbcore: registered new interface driver asix [ 3.127508] usbcore: registered new interface driver ax88179_178a [ 3.133823] usbcore: registered new interface driver cdc_ether [ 3.139901] usbcore: registered new interface driver smsc95xx [ 3.145850] usbcore: registered new interface driver net1080 [ 3.151682] usbcore: registered new interface driver cdc_subset [ 3.157724] usbcore: registered new interface driver zaurus [ 3.163481] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 3.171130] usbcore: registered new interface driver cdc_ncm [ 3.176916] usbcore: registered new interface driver r8153_ecm [ 3.183077] usbcore: registered new interface driver usb-storage [ 3.198371] SPI driver ads7846 has no spi_device_id for ti,tsc2046 [ 3.204657] SPI driver ads7846 has no spi_device_id for ti,ads7843 [ 3.210908] SPI driver ads7846 has no spi_device_id for ti,ads7845 [ 3.217109] SPI driver ads7846 has no spi_device_id for ti,ads7873 [ 3.235154] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 3.241554] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 3.251146] i2c_dev: i2c /dev entries driver [ 3.270844] Bluetooth: HCI UART driver ver 2.3 [ 3.275322] Bluetooth: HCI UART protocol H4 registered [ 3.280629] Bluetooth: HCI UART protocol LL registered [ 3.289113] sdhci: Secure Digital Host Controller Interface driver [ 3.295363] sdhci: Copyright(c) Pierre Ossman [ 3.299745] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.309308] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 3.309660] caam 2100000.crypto: Entropy delay = 3200 [ 3.316311] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 3.353112] ata1: SATA link down (SStatus 0 SControl 300) [ 3.359390] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 3.359881] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 3.367481] ahci-imx 2200000.sata: no device found, disabling link. [ 3.367758] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 3.380258] caam 2100000.crypto: Instantiated RNG4 SH0 [ 3.386497] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 3.441022] caam 2100000.crypto: Instantiated RNG4 SH1 [ 3.446522] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 3.453300] caam 2100000.crypto: job rings = 2, qi = 0 [ 3.469189] caam algorithms registered in /proc/crypto [ 3.475058] caam 2100000.crypto: registering rng-caam [ 3.493613] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.503279] caam 2100000.crypto: rng crypto API alg registered prng-caam [ 3.504318] mmc0: new high speed SDHC card at address 1234 [ 3.519323] usbcore: registered new interface driver usbhid [ 3.520326] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.525008] usbhid: USB HID core driver [ 3.539345] imx-ipuv3-csi imx-ipuv3-csi.0: Registered ipu1_csi0 capture as /dev/video0 [ 3.549217] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpenc capture as /dev/video1 [ 3.558009] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpvf capture as /dev/video2 [ 3.566589] mmc2: new DDR MMC card at address 0001 [ 3.567026] imx-ipuv3-csi imx-ipuv3-csi.1: Registered ipu1_csi1 capture as /dev/video3 [ 3.573705] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.580836] imx-ipuv3-csi imx-ipuv3-csi.4: Registered ipu2_csi0 capture as /dev/video4 [ 3.591712] mmcblk2: p1 p2 [ 3.592931] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpenc capture as /dev/video5 [ 3.598117] mmcblk2boot0: mmc2:0001 S10004 4.00 MiB [ 3.603402] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpvf capture as /dev/video6 [ 3.614451] mmcblk2boot1: mmc2:0001 S10004 4.00 MiB [ 3.616791] imx-ipuv3-csi imx-ipuv3-csi.5: Registered ipu2_csi1 capture as /dev/video7 [ 3.627162] mmcblk2rpmb: mmc2:0001 S10004 4.00 MiB, chardev (243:0) [ 3.629608] imx6-mipi-csi2 21dc000.mipi: Consider updating driver imx6-mipi-csi2 to match on endpoints [ 3.667701] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 3.678776] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 3.684347] random: crng init done [ 3.737017] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.756070] NET: Registered PF_INET6 protocol family [ 3.766703] Segment Routing with IPv6 [ 3.770767] In-situ OAM (IOAM) with IPv6 [ 3.774854] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.783590] NET: Registered PF_PACKET protocol family [ 3.788676] can: controller area network core [ 3.793332] NET: Registered PF_CAN protocol family [ 3.798156] can: raw protocol [ 3.801340] can: broadcast manager protocol [ 3.805580] can: netlink gateway - max_hops=1 [ 3.810570] Key type dns_resolver registered [ 3.829899] Registering SWP/SWPB emulation handler [ 3.835774] Loading compiled-in X.509 certificates [ 4.017537] imx_usb 2184200.usb: No over current polarity defined [ 4.030270] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 4.035700] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 4.070636] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 4.080194] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 4.088843] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.096304] usb usb1: Product: EHCI Host Controller [ 4.101335] usb usb1: Manufacturer: Linux 6.1.31 ehci_hcd [ 4.106789] usb usb1: SerialNumber: ci_hdrc.1 [ 4.117389] hub 1-0:1.0: USB hub found [ 4.121547] hub 1-0:1.0: 1 port detected [ 4.131003] video-mux 20e0000.iomuxc-gpr:ipu1_csi0_mux: Consider updating driver video-mux to match on endpoints [ 4.144081] video-mux 20e0000.iomuxc-gpr:ipu2_csi1_mux: Consider updating driver video-mux to match on endpoints [ 4.160791] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 4.176467] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.193091] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.208272] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.275710] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.283772] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.292945] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 4.293222] ALSA device list: [ 4.304031] No soundcards found. [ 4.311471] Freeing unused kernel image (initmem) memory: 1024K [ 4.341108] Run /init as init process [ 4.410229] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK Starting klogd: OK Running sysctl: [ 4.652301] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.01 [ 4.660793] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.667975] usb 1-1: Product: USB2.0 Hub [ 4.672046] usb 1-1: Manufacturer: GenesysLogic [ 4.682144] hub 1-1:1.0: USB hub found OK [ 4.688130] hub 1-1:1.0: 4 ports detected Populating /dev using udev: [ 4.709343] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.731183] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.732969] udevd[219]: starting version 3.2.9 [ 4.758359] udevd[219]: specified user 'tss' unknown [ 4.763582] udevd[219]: specified group 'tss' unknown [ 4.776550] udevd[220]: starting eudev-3.2.9 [ 5.414688] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 5.456780] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 5.475575] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 5.484175] coda 2040000.vpu: Falling back to sysfs fallback for: vpu_fw_imx6q.bin [ 5.526047] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 5.570560] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 5.581128] imx-sdma 20ec000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin [ 5.655893] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 5.708751] ov5645 1-003c: ov5645_write_reg: write reg error -6: reg=3103, val=11 [ 5.716804] ov5645 1-003c: could not set init registers [ 5.726375] ov5645 1-003c: could not power up OV5645 [ 5.748267] fsl-asoc-card sound: ASoC: driver name too long 'imx6-wandboard-sgtl5000' -> 'imx6-wandboard-' done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-994534/environment . /lava-994534/environment / # /lava-994534/bin/lava-test-runner /lava-994534/0 /lava-994534/bin/lava-test-runner /lava-994534/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-994534/0/tests/0_dmesg + cat uuid + UUID=994534_1.5.2.3.1[ 7.118957] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 7.238337] [ 7.342689] [ 7.446562] + set +x [ 7.458088] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-994534/environment / # . /lava-994534/environment/lava-994534/bin/lava-test-runner /lava-994534/1 / # /lava-994534/bin/lava-test-runner /lava-994534/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-994534/1/tests/1_bootrr + cat uuid + UUID=994534_1.5.2.3.5[ 8.074205] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-994534/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-994534/1/../bin/lava-test-case [ 8.231920] /lava-994534/1/../bin/lava-test-case [ 8.338958] /lava-994534/1/../bin/lava-test-case [ 8.395212] + set +x [ 8.436857] / #