Boot log: beagle-xm
- Kernel Errors: 0
- Boot result: PASS
- Errors: 0
- Kernel Warnings: 0
- Warnings: 1
1 18:03:43.950871 lava-dispatcher, installed at version: 2022.10
2 18:03:43.951225 start: 0 validate
3 18:03:43.951551 Start time: 2023-01-18 18:03:43.951537+00:00 (UTC)
4 18:03:43.951828 Validating that http://storage.kernelci.org/images/rootfs/buildroot/buildroot-baseline/20230114.0/armel/rootfs.cpio.gz exists
5 18:03:43.962212 Validating that http://storage.kernelci.org/cip/linux-4.4.y-st-rc/v4.4-st20-821-g39bdf0444b23/arm/omap2plus_defconfig/gcc-10/kernel/zImage exists
6 18:03:44.011579 Validating that http://storage.kernelci.org/cip/linux-4.4.y-st-rc/v4.4-st20-821-g39bdf0444b23/arm/omap2plus_defconfig/gcc-10/dtbs/omap3-beagle-xm.dtb exists
7 18:03:44.030703 Validating that http://storage.kernelci.org/cip/linux-4.4.y-st-rc/v4.4-st20-821-g39bdf0444b23/arm/omap2plus_defconfig/gcc-10/modules.tar.xz exists
8 18:03:44.060500 validate duration: 0.11
10 18:03:44.061263 start: 1 tftp-deploy (timeout 00:10:00) [common]
11 18:03:44.061529 start: 1.1 download-retry (timeout 00:10:00) [common]
12 18:03:44.061789 start: 1.1.1 http-download (timeout 00:10:00) [common]
13 18:03:44.062135 Not decompressing ramdisk as can be used compressed.
14 18:03:44.062389 downloading http://storage.kernelci.org/images/rootfs/buildroot/buildroot-baseline/20230114.0/armel/rootfs.cpio.gz
15 18:03:44.062574 saving as /var/lib/lava/dispatcher/tmp/3154458/tftp-deploy-kkl_933t/ramdisk/rootfs.cpio.gz
16 18:03:44.062750 total size: 7885809 (7MB)
17 18:03:44.075360 progress 0% (0MB)
18 18:03:44.115703 progress 5% (0MB)
19 18:03:44.139703 progress 10% (0MB)
20 18:03:44.159023 progress 15% (1MB)
21 18:03:44.180983 progress 20% (1MB)
22 18:03:44.200437 progress 25% (1MB)
23 18:03:44.219399 progress 30% (2MB)
24 18:03:44.238961 progress 35% (2MB)
25 18:03:44.260760 progress 40% (3MB)
26 18:03:44.284027 progress 45% (3MB)
27 18:03:44.304028 progress 50% (3MB)
28 18:03:44.334753 progress 55% (4MB)
29 18:03:44.355977 progress 60% (4MB)
30 18:03:44.377960 progress 65% (4MB)
31 18:03:44.398692 progress 70% (5MB)
32 18:03:44.419062 progress 75% (5MB)
33 18:03:44.436235 progress 80% (6MB)
34 18:03:44.452296 progress 85% (6MB)
35 18:03:44.467942 progress 90% (6MB)
36 18:03:44.483600 progress 95% (7MB)
37 18:03:44.498820 progress 100% (7MB)
38 18:03:44.499453 7MB downloaded in 0.44s (17.22MB/s)
39 18:03:44.499810 end: 1.1.1 http-download (duration 00:00:00) [common]
41 18:03:44.500449 end: 1.1 download-retry (duration 00:00:00) [common]
42 18:03:44.500648 start: 1.2 download-retry (timeout 00:10:00) [common]
43 18:03:44.500843 start: 1.2.1 http-download (timeout 00:10:00) [common]
44 18:03:44.501100 downloading http://storage.kernelci.org/cip/linux-4.4.y-st-rc/v4.4-st20-821-g39bdf0444b23/arm/omap2plus_defconfig/gcc-10/kernel/zImage
45 18:03:44.501247 saving as /var/lib/lava/dispatcher/tmp/3154458/tftp-deploy-kkl_933t/kernel/zImage
46 18:03:44.501397 total size: 3713600 (3MB)
47 18:03:44.501535 No compression specified
48 18:03:44.534234 progress 0% (0MB)
49 18:03:44.555737 progress 5% (0MB)
50 18:03:44.572962 progress 10% (0MB)
51 18:03:44.585183 progress 15% (0MB)
52 18:03:44.602124 progress 20% (0MB)
53 18:03:44.709495 progress 25% (0MB)
54 18:03:44.720666 progress 30% (1MB)
55 18:03:44.734578 progress 35% (1MB)
56 18:03:44.748979 progress 40% (1MB)
57 18:03:44.761062 progress 45% (1MB)
58 18:03:44.775241 progress 50% (1MB)
59 18:03:44.790025 progress 55% (1MB)
60 18:03:44.802335 progress 60% (2MB)
61 18:03:44.816804 progress 65% (2MB)
62 18:03:44.831944 progress 70% (2MB)
63 18:03:44.844107 progress 75% (2MB)
64 18:03:44.858782 progress 80% (2MB)
65 18:03:44.878769 progress 85% (3MB)
66 18:03:44.890530 progress 90% (3MB)
67 18:03:44.904927 progress 95% (3MB)
68 18:03:44.917038 progress 100% (3MB)
69 18:03:44.917685 3MB downloaded in 0.42s (8.51MB/s)
70 18:03:44.918125 end: 1.2.1 http-download (duration 00:00:00) [common]
72 18:03:44.919051 end: 1.2 download-retry (duration 00:00:00) [common]
73 18:03:44.919352 start: 1.3 download-retry (timeout 00:09:59) [common]
74 18:03:44.919615 start: 1.3.1 http-download (timeout 00:09:59) [common]
75 18:03:44.919957 downloading http://storage.kernelci.org/cip/linux-4.4.y-st-rc/v4.4-st20-821-g39bdf0444b23/arm/omap2plus_defconfig/gcc-10/dtbs/omap3-beagle-xm.dtb
76 18:03:44.920167 saving as /var/lib/lava/dispatcher/tmp/3154458/tftp-deploy-kkl_933t/dtb/omap3-beagle-xm.dtb
77 18:03:44.920364 total size: 63363 (0MB)
78 18:03:44.920557 No compression specified
79 18:03:44.949468 progress 51% (0MB)
80 18:03:44.951713 progress 100% (0MB)
81 18:03:44.952614 0MB downloaded in 0.03s (1.87MB/s)
82 18:03:44.953049 end: 1.3.1 http-download (duration 00:00:00) [common]
84 18:03:44.953878 end: 1.3 download-retry (duration 00:00:00) [common]
85 18:03:44.954144 start: 1.4 download-retry (timeout 00:09:59) [common]
86 18:03:44.954409 start: 1.4.1 http-download (timeout 00:09:59) [common]
87 18:03:44.954735 downloading http://storage.kernelci.org/cip/linux-4.4.y-st-rc/v4.4-st20-821-g39bdf0444b23/arm/omap2plus_defconfig/gcc-10/modules.tar.xz
88 18:03:44.954949 saving as /var/lib/lava/dispatcher/tmp/3154458/tftp-deploy-kkl_933t/modules/modules.tar
89 18:03:44.955145 total size: 2163472 (2MB)
90 18:03:44.955339 Using unxz to decompress xz
91 18:03:44.982484 progress 1% (0MB)
92 18:03:44.989827 progress 6% (0MB)
93 18:03:45.002502 progress 12% (0MB)
94 18:03:45.017941 progress 18% (0MB)
95 18:03:45.032789 progress 24% (0MB)
96 18:03:45.046994 progress 30% (0MB)
97 18:03:45.063170 progress 36% (0MB)
98 18:03:45.077002 progress 42% (0MB)
99 18:03:45.090961 progress 48% (1MB)
100 18:03:45.101471 progress 53% (1MB)
101 18:03:45.115406 progress 59% (1MB)
102 18:03:45.128510 progress 65% (1MB)
103 18:03:45.143213 progress 71% (1MB)
104 18:03:45.156122 progress 77% (1MB)
105 18:03:45.170000 progress 83% (1MB)
106 18:03:45.184302 progress 89% (1MB)
107 18:03:45.198959 progress 95% (1MB)
108 18:03:45.212267 progress 100% (2MB)
109 18:03:45.220636 2MB downloaded in 0.27s (7.77MB/s)
110 18:03:45.221130 end: 1.4.1 http-download (duration 00:00:00) [common]
112 18:03:45.221656 end: 1.4 download-retry (duration 00:00:00) [common]
113 18:03:45.221825 start: 1.5 prepare-tftp-overlay (timeout 00:09:59) [common]
114 18:03:45.221993 start: 1.5.1 extract-nfsrootfs (timeout 00:09:59) [common]
115 18:03:45.222144 end: 1.5.1 extract-nfsrootfs (duration 00:00:00) [common]
116 18:03:45.222295 start: 1.5.2 lava-overlay (timeout 00:09:59) [common]
117 18:03:45.460902 [common] Preparing overlay tarball in /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c
118 18:03:45.461776 makedir: /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin
119 18:03:45.462658 makedir: /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/tests
120 18:03:45.463384 makedir: /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/results
121 18:03:45.464053 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-add-keys
122 18:03:45.464877 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-add-sources
123 18:03:45.465633 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-background-process-start
124 18:03:45.466443 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-background-process-stop
125 18:03:45.467246 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-common-functions
126 18:03:45.468008 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-echo-ipv4
127 18:03:45.468747 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-install-packages
128 18:03:45.469595 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-installed-packages
129 18:03:45.470326 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-os-build
130 18:03:45.471089 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-probe-channel
131 18:03:45.471943 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-probe-ip
132 18:03:45.472687 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-target-ip
133 18:03:45.473409 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-target-mac
134 18:03:45.474164 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-target-storage
135 18:03:45.474924 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-test-case
136 18:03:45.475689 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-test-event
137 18:03:45.476476 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-test-feedback
138 18:03:45.477226 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-test-raise
139 18:03:45.477959 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-test-reference
140 18:03:45.478725 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-test-runner
141 18:03:45.479473 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-test-set
142 18:03:45.480254 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-test-shell
143 18:03:45.481000 Updating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-install-packages (oe)
144 18:03:45.523945 Updating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/bin/lava-installed-packages (oe)
145 18:03:45.524946 Creating /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/environment
146 18:03:45.525307 LAVA metadata
147 18:03:45.525514 - LAVA_JOB_ID=3154458
148 18:03:45.525688 - LAVA_DISPATCHER_IP=192.168.0.2
149 18:03:45.525943 start: 1.5.2.1 ssh-authorize (timeout 00:09:59) [common]
150 18:03:45.526443 end: 1.5.2.1 ssh-authorize (duration 00:00:00) [common]
151 18:03:45.526668 start: 1.5.2.2 lava-vland-overlay (timeout 00:09:59) [common]
152 18:03:45.526820 skipped lava-vland-overlay
153 18:03:45.527018 end: 1.5.2.2 lava-vland-overlay (duration 00:00:00) [common]
154 18:03:45.527206 start: 1.5.2.3 lava-multinode-overlay (timeout 00:09:59) [common]
155 18:03:45.527343 skipped lava-multinode-overlay
156 18:03:45.527528 end: 1.5.2.3 lava-multinode-overlay (duration 00:00:00) [common]
157 18:03:45.527712 start: 1.5.2.4 test-definition (timeout 00:09:59) [common]
158 18:03:45.527899 Loading test definitions
159 18:03:45.528130 start: 1.5.2.4.1 inline-repo-action (timeout 00:09:59) [common]
160 18:03:45.528302 Using /lava-3154458 at stage 0
161 18:03:45.528964 uuid=3154458_1.5.2.4.1 testdef=None
162 18:03:45.529180 end: 1.5.2.4.1 inline-repo-action (duration 00:00:00) [common]
163 18:03:45.529385 start: 1.5.2.4.2 test-overlay (timeout 00:09:59) [common]
164 18:03:45.530415 end: 1.5.2.4.2 test-overlay (duration 00:00:00) [common]
166 18:03:45.530942 start: 1.5.2.4.3 test-install-overlay (timeout 00:09:59) [common]
167 18:03:45.674674 end: 1.5.2.4.3 test-install-overlay (duration 00:00:00) [common]
169 18:03:45.675304 start: 1.5.2.4.4 test-runscript-overlay (timeout 00:09:58) [common]
170 18:03:45.738230 runner path: /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/0/tests/0_dmesg test_uuid 3154458_1.5.2.4.1
171 18:03:45.738740 end: 1.5.2.4.4 test-runscript-overlay (duration 00:00:00) [common]
173 18:03:45.739530 start: 1.5.2.4.5 inline-repo-action (timeout 00:09:58) [common]
174 18:03:45.739774 Using /lava-3154458 at stage 1
175 18:03:45.740685 uuid=3154458_1.5.2.4.5 testdef=None
176 18:03:45.740963 end: 1.5.2.4.5 inline-repo-action (duration 00:00:00) [common]
177 18:03:45.741222 start: 1.5.2.4.6 test-overlay (timeout 00:09:58) [common]
178 18:03:45.742630 end: 1.5.2.4.6 test-overlay (duration 00:00:00) [common]
180 18:03:45.743329 start: 1.5.2.4.7 test-install-overlay (timeout 00:09:58) [common]
181 18:03:45.745217 end: 1.5.2.4.7 test-install-overlay (duration 00:00:00) [common]
183 18:03:45.746006 start: 1.5.2.4.8 test-runscript-overlay (timeout 00:09:58) [common]
184 18:03:45.938922 runner path: /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/1/tests/1_bootrr test_uuid 3154458_1.5.2.4.5
185 18:03:45.939460 end: 1.5.2.4.8 test-runscript-overlay (duration 00:00:00) [common]
187 18:03:45.940603 Creating lava-test-runner.conf files
188 18:03:45.940814 Using lava-test-runner path: /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/0 for stage 0
189 18:03:45.941097 - 0_dmesg
190 18:03:45.941375 Using lava-test-runner path: /var/lib/lava/dispatcher/tmp/3154458/lava-overlay-9qh5fv9c/lava-3154458/1 for stage 1
191 18:03:45.941669 - 1_bootrr
192 18:03:45.941965 end: 1.5.2.4 test-definition (duration 00:00:00) [common]
193 18:03:45.942236 start: 1.5.2.5 compress-overlay (timeout 00:09:58) [common]
194 18:03:45.964783 end: 1.5.2.5 compress-overlay (duration 00:00:00) [common]
195 18:03:45.965147 start: 1.5.2.6 persistent-nfs-overlay (timeout 00:09:58) [common]
196 18:03:45.965426 end: 1.5.2.6 persistent-nfs-overlay (duration 00:00:00) [common]
197 18:03:45.965681 end: 1.5.2 lava-overlay (duration 00:00:01) [common]
198 18:03:45.965938 start: 1.5.3 extract-overlay-ramdisk (timeout 00:09:58) [common]
199 18:03:46.574815 end: 1.5.3 extract-overlay-ramdisk (duration 00:00:01) [common]
200 18:03:46.576311 start: 1.5.4 extract-modules (timeout 00:09:57) [common]
201 18:03:46.576859 extracting modules file /var/lib/lava/dispatcher/tmp/3154458/tftp-deploy-kkl_933t/modules/modules.tar to /var/lib/lava/dispatcher/tmp/3154458/extract-overlay-ramdisk-qmjsnj43/ramdisk
202 18:03:46.716243 end: 1.5.4 extract-modules (duration 00:00:00) [common]
203 18:03:46.716537 start: 1.5.5 apply-overlay-tftp (timeout 00:09:57) [common]
204 18:03:46.716736 [common] Applying overlay /var/lib/lava/dispatcher/tmp/3154458/compress-overlay-vfasdgqc/overlay-1.5.2.5.tar.gz to ramdisk
205 18:03:46.716888 [common] Applying overlay /var/lib/lava/dispatcher/tmp/3154458/compress-overlay-vfasdgqc/overlay-1.5.2.5.tar.gz to directory /var/lib/lava/dispatcher/tmp/3154458/extract-overlay-ramdisk-qmjsnj43/ramdisk
206 18:03:46.732709 end: 1.5.5 apply-overlay-tftp (duration 00:00:00) [common]
207 18:03:46.733071 start: 1.5.6 prepare-kernel (timeout 00:09:57) [common]
208 18:03:46.733321 start: 1.5.6.1 uboot-prepare-kernel (timeout 00:09:57) [common]
209 18:03:46.733535 end: 1.5.6.1 uboot-prepare-kernel (duration 00:00:00) [common]
210 18:03:46.733722 end: 1.5.6 prepare-kernel (duration 00:00:00) [common]
211 18:03:46.733902 start: 1.5.7 configure-preseed-file (timeout 00:09:57) [common]
212 18:03:46.734085 end: 1.5.7 configure-preseed-file (duration 00:00:00) [common]
213 18:03:46.734259 start: 1.5.8 compress-ramdisk (timeout 00:09:57) [common]
214 18:03:46.734407 Building ramdisk /var/lib/lava/dispatcher/tmp/3154458/extract-overlay-ramdisk-qmjsnj43/ramdisk.cpio containing /var/lib/lava/dispatcher/tmp/3154458/extract-overlay-ramdisk-qmjsnj43/ramdisk
215 18:03:48.735903 >> 61981 blocks
216 18:03:51.172248 Adding RAMdisk u-boot header.
217 18:03:51.172764 mkimage -A arm -T ramdisk -C none -d /var/lib/lava/dispatcher/tmp/3154458/extract-overlay-ramdisk-qmjsnj43/ramdisk.cpio.gz /var/lib/lava/dispatcher/tmp/3154458/extract-overlay-ramdisk-qmjsnj43/ramdisk.cpio.gz.uboot
218 18:03:53.333585 output: Image Name:
219 18:03:53.334873 output: Created: Wed Jan 18 18:03:51 2023
220 18:03:53.335255 output: Image Type: ARM Linux RAMDisk Image (uncompressed)
221 18:03:53.335618 output: Data Size: 11151641 Bytes = 10890.27 KiB = 10.64 MiB
222 18:03:53.335991 output: Load Address: 00000000
223 18:03:53.336379 output: Entry Point: 00000000
224 18:03:53.336702 output:
225 18:03:53.341024 rename /var/lib/lava/dispatcher/tmp/3154458/extract-overlay-ramdisk-qmjsnj43/ramdisk.cpio.gz.uboot to /var/lib/lava/dispatcher/tmp/3154458/tftp-deploy-kkl_933t/ramdisk/ramdisk.cpio.gz.uboot
226 18:03:53.342439 end: 1.5.8 compress-ramdisk (duration 00:00:07) [common]
227 18:03:53.343394 end: 1.5 prepare-tftp-overlay (duration 00:00:08) [common]
228 18:03:53.344636 start: 1.6 lxc-create-udev-rule-action (timeout 00:09:51) [common]
229 18:03:53.345319 No LXC device requested
230 18:03:53.346190 end: 1.6 lxc-create-udev-rule-action (duration 00:00:00) [common]
231 18:03:53.346823 start: 1.7 deploy-device-env (timeout 00:09:51) [common]
232 18:03:53.347311 end: 1.7 deploy-device-env (duration 00:00:00) [common]
233 18:03:53.347810 Checking files for TFTP limit of 4294967296 bytes.
234 18:03:53.350560 end: 1 tftp-deploy (duration 00:00:09) [common]
235 18:03:53.351168 start: 2 uboot-action (timeout 00:05:00) [common]
236 18:03:53.351713 start: 2.1 uboot-from-media (timeout 00:05:00) [common]
237 18:03:53.352142 end: 2.1 uboot-from-media (duration 00:00:00) [common]
238 18:03:53.352539 start: 2.2 bootloader-overlay (timeout 00:05:00) [common]
239 18:03:53.353087 substitutions:
240 18:03:53.353367 - {BOOTX}: bootz 0x81000000 0x82000000 0x81f00000
241 18:03:53.353652 - {DTB_ADDR}: 0x81f00000
242 18:03:53.353927 - {DTB}: 3154458/tftp-deploy-kkl_933t/dtb/omap3-beagle-xm.dtb
243 18:03:53.354224 - {INITRD}: 3154458/tftp-deploy-kkl_933t/ramdisk/ramdisk.cpio.gz.uboot
244 18:03:53.354493 - {KERNEL_ADDR}: 0x81000000
245 18:03:53.354686 - {KERNEL}: 3154458/tftp-deploy-kkl_933t/kernel/zImage
246 18:03:53.354845 - {LAVA_MAC}: None
247 18:03:53.354984 - {PRESEED_CONFIG}: None
248 18:03:53.355170 - {PRESEED_LOCAL}: None
249 18:03:53.355426 - {RAMDISK_ADDR}: 0x82000000
250 18:03:53.355606 - {RAMDISK}: 3154458/tftp-deploy-kkl_933t/ramdisk/ramdisk.cpio.gz.uboot
251 18:03:53.355785 - {ROOT_PART}: None
252 18:03:53.355964 - {ROOT}: None
253 18:03:53.356118 - {SERVER_IP}: 192.168.0.2
254 18:03:53.356290 - {TEE_ADDR}: 0x83000000
255 18:03:53.356464 - {TEE}: None
256 18:03:53.356585 Parsed boot commands:
257 18:03:53.356709 - setenv usbethaddr 00:40:5c:26:0a:6c; usb start
258 18:03:53.356839 - setenv autoload no
259 18:03:53.356957 - dhcp
260 18:03:53.357091 - setenv serverip 192.168.0.2
261 18:03:53.357217 - tftp 0x81000000 3154458/tftp-deploy-kkl_933t/kernel/zImage
262 18:03:53.357334 - tftp 0x82000000 3154458/tftp-deploy-kkl_933t/ramdisk/ramdisk.cpio.gz.uboot
263 18:03:53.357466 - setenv initrd_size ${filesize}
264 18:03:53.357584 - tftp 0x81f00000 3154458/tftp-deploy-kkl_933t/dtb/omap3-beagle-xm.dtb
265 18:03:53.357729 - setenv bootargs 'console=ttyO2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp'
266 18:03:53.357861 - bootz 0x81000000 0x82000000 0x81f00000
267 18:03:53.358036 end: 2.2 bootloader-overlay (duration 00:00:00) [common]
269 18:03:53.358543 start: 2.3 connect-device (timeout 00:05:00) [common]
270 18:03:53.358708 [common] connect-device Connecting to device using '/usr/local/bin/labgrid-client -x ws://nuc-1:20408/ws -p omap3-beagle-xm console --loop'
271 18:03:53.772071 Setting prompt string to ['lava-test: # ']
272 18:03:53.772667 end: 2.3 connect-device (duration 00:00:00) [common]
273 18:03:53.772926 start: 2.4 uboot-commands (timeout 00:05:00) [common]
274 18:03:53.773175 start: 2.4.1 reset-device (timeout 00:05:00) [common]
275 18:03:53.773389 start: 2.4.1.1 pdu-reboot (timeout 00:05:00) [common]
276 18:03:53.773773 Calling: 'nice' '/usr/local/bin/labgrid-client' '-x' 'ws://nuc-1:20408/ws' '-p' 'omap3-beagle-xm' 'power' 'cycle'
277 18:04:01.130287 Returned 0 in 7 seconds
278 18:04:01.231484 end: 2.4.1.1 pdu-reboot (duration 00:00:07) [common]
280 18:04:01.232052 end: 2.4.1 reset-device (duration 00:00:07) [common]
281 18:04:01.232232 start: 2.4.2 bootloader-interrupt (timeout 00:04:52) [common]
282 18:04:01.232385 Setting prompt string to ['Hit any key to stop autoboot']
283 18:04:01.232517 bootloader-interrupt: Wait for prompt ['Hit any key to stop autoboot'] (timeout 00:05:00)
284 18:04:01.232953 connecting to NetworkSerialPort(target=Target(name='omap3-beagle-xm', env=None), name='USBSerialPort', state=<BindingState.bound: 1>, avail=True, host='nuc-1', port=41369, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t nuc-1:41369
285 18:04:01.233101 connected to 192.168.0.1 (port 41369)
286 18:04:01.233218 Escape character: Ctrl-\
287 18:04:01.233329 Type the escape character to get to the prompt.
288 18:04:01.523100
289 18:04:01.531210 U-Boot SPL 2018.09-rc2-00001-ge6aa9785acb2 (Aug 15 2018 - 09:41:52 -0700)
290 18:04:01.531677 Trying to boot from MMC1
291 18:04:01.720907 spl_load_image_fat_os: error reading image args, err - -2
292 18:04:01.963797
293 18:04:01.964311
294 18:04:01.969130 U-Boot 2018.09-rc2-00001-ge6aa9785acb2 (Aug 15 2018 - 09:41:52 -0700)
295 18:04:01.969523
296 18:04:01.974741 OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-200MHz, Max CPU Clock 1 GHz
297 18:04:01.975106 Model: TI OMAP3 BeagleBoard
298 18:04:01.978567 OMAP3 Beagle board + LPDDR/NAND
299 18:04:02.033434 I2C: ready
300 18:04:02.033847 DRAM: 256 MiB
301 18:04:02.101340 NAND: 0 MiB
302 18:04:02.117605 MMC: OMAP SD/MMC: 0
303 18:04:02.124352 Loading Environment from NAND... *** Warning - readenv() failed, using default environment
304 18:04:02.124942
305 18:04:02.186423 Beagle xM Rev C
306 18:04:02.195182 No EEPROM on expansion board
307 18:04:02.195767 No EEPROM on expansion board
308 18:04:02.203478 OMAP die ID: 0b5000029ff80000016842c910019004
309 18:04:02.210196 Net: usb_ether
310 18:04:02.210782 starting USB...
311 18:04:02.219247 USB0: USB EHCI 1.00
312 18:04:03.554315 scanning bus 0 for devices... 3 USB Device(s) found
313 18:04:03.559917 scanning usb for storage devices... 0 Storage Device(s) found
314 18:04:03.566238 scanning usb for ethernet devices... 1 Ethernet Device(s) found
316 18:04:03.627311 Hit any key to stop autoboot: 2
317 18:04:03.628186 end: 2.4.2 bootloader-interrupt (duration 00:00:02) [common]
318 18:04:03.628767 start: 2.4.3 bootloader-commands (timeout 00:04:50) [common]
319 18:04:03.629238 Setting prompt string to ['BeagleBoard']
320 18:04:03.629658 bootloader-commands: Wait for prompt ['BeagleBoard'] (timeout 00:04:50)
321 18:04:03.637307 0
322 18:04:03.638298 Setting prompt string to ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN']
324 18:04:03.740012 BeagleBoard # setenv usbethaddr 00:40:5c:26:0a:6c; usb start
325 18:04:03.740630 bootloader-commands: Wait for prompt ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:50)
326 18:04:03.746624 setenv usbethaddr 00:40:5c:26:0a:6c; usb start
328 18:04:03.848328 BeagleBoard # setenv autoload no
329 18:04:03.848642 bootloader-commands: Wait for prompt ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:50)
330 18:04:03.854361 setenv autoload no
332 18:04:03.955683 BeagleBoard # dhcp
333 18:04:03.956484 bootloader-commands: Wait for prompt ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:49)
334 18:04:03.964533 dhcp
335 18:04:06.220889 Need valid 'usbnet_devaddr' to be setWaiting for Ethernet connection... done.
336 18:04:06.221547 BOOTP broadcast 1
337 18:04:06.472309 BOOTP broadcast 2
338 18:04:06.482723 DHCP client bound to address 192.168.0.189 (261 ms)
340 18:04:06.584847 BeagleBoardsetenv serverip 192.168.0.2
341 18:04:06.585496 bootloader-commands: Wait for prompt ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:47)
342 18:04:06.591508 # setenv serverip 192.168.0.2
344 18:04:06.694122 BeagleBoard # tftp 0x81000000 3154458/tftp-deploy-kkl_933t/kernel/zImage
345 18:04:06.694815 bootloader-commands: Wait for prompt ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:47)
346 18:04:06.699833 tftp 0x81000000 3154458/tftp-deploy-kkl_933t/kernel/zImage
347 18:04:08.248816 Waiting for Ethernet connection... done.
348 18:04:08.249442 Using sms0 device
349 18:04:08.254288 TFTP from server 192.168.0.2; our IP address is 192.168.0.189
350 18:04:08.262036 Filename '3154458/tftp-deploy-kkl_933t/kernel/zImage'.
351 18:04:08.262597 Load address: 0x81000000
352 18:04:18.687089 Loading: *T #################################################################
353 18:04:19.112108 #################################################################
354 18:04:19.518688 #################################################################
355 18:04:19.885241 ##########################################################
356 18:04:19.885768 311.5 KiB/s
357 18:04:19.886140 done
358 18:04:19.889213 Bytes transferred = 3713600 (38aa40 hex)
360 18:04:19.991055 BeagleBoard # tftp 0x82000000 3154458/tftp-deploy-kkl_933t/ramdisk/ramdisk.cpio.gz.uboot
361 18:04:19.991793 bootloader-commands: Wait for prompt ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:33)
362 18:04:19.996653 tftp 0x82000000 3154458/tftp-deploy-kkl_933t/ramdisk/ramdisk.cpio.gz.uboot
363 18:04:21.545841 Waiting for Ethernet connection... done.
364 18:04:21.546547 Using sms0 device
365 18:04:21.551285 TFTP from server 192.168.0.2; our IP address is 192.168.0.189
366 18:04:21.556857 Filename '3154458/tftp-deploy-kkl_933t/ramdisk/ramdisk.cpio.gz.uboot'.
367 18:04:21.557375 Load address: 0x82000000
368 18:04:26.998487 Loading: *#################################################################
369 18:04:27.438905 #################################################################
370 18:04:27.865232 #################################################################
371 18:04:28.279005 #################################################################
372 18:04:28.703156 #################################################################
373 18:04:29.123045 #################################################################
374 18:04:29.557309 #################################################################
375 18:04:29.980443 #################################################################
376 18:04:30.400384 #################################################################
377 18:04:30.836109 #################################################################
378 18:04:31.266541 #################################################################
379 18:04:31.567381 #############################################
380 18:04:31.568217 1.1 MiB/s
381 18:04:31.568822 done
382 18:04:31.569495 Bytes transferred = 11151705 (aa2959 hex)
384 18:04:31.673198 BeagleBoard # setenv initrd_size ${filesize}
385 18:04:31.673898 bootloader-commands: Wait for prompt ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:22)
386 18:04:31.680273 setenv initrd_size ${filesize}
388 18:04:31.782335 BeagleBoard # tftp 0x81f00000 3154458/tftp-deploy-kkl_933t/dtb/omap3-beagle-xm.dtb
389 18:04:31.782995 bootloader-commands: Wait for prompt ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:22)
390 18:04:31.788097 tftp 0x81f00000 3154458/tftp-deploy-kkl_933t/dtb/omap3-beagle-xm.dtb
391 18:04:33.337265 Waiting for Ethernet connection... done.
392 18:04:33.337849 Using sms0 device
393 18:04:33.342821 TFTP from server 192.168.0.2; our IP address is 192.168.0.189
394 18:04:33.348126 Filename '3154458/tftp-deploy-kkl_933t/dtb/omap3-beagle-xm.dtb'.
395 18:04:33.348936 Load address: 0x81f00000
396 18:04:38.384741 Loading: *#####
397 18:04:38.385393 11.7 KiB/s
398 18:04:38.385841 done
399 18:04:38.386204 Bytes transferred = 63363 (f783 hex)
401 18:04:38.490256 BeagleBoard # setenv bootargs 'console=ttyO2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp'
402 18:04:38.490948 bootloader-commands: Wait for prompt ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:15)
403 18:04:38.496792 setenv bootargs 'console=ttyO2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp'
405 18:04:38.598738 BeagleBoard # bootz 0x81000000 0x82000000 0x81f00000
406 18:04:38.599024 Setting prompt string to 'Starting kernel'
407 18:04:38.599207 Setting prompt string to ['Starting kernel']
408 18:04:38.599357 Setting prompt string to ['Starting kernel', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN']
409 18:04:38.599517 bootloader-commands: Wait for prompt ['Starting kernel', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:15)
410 18:04:38.605678 bootz 0x81000000 0x82000000 0x81f00000
411 18:04:38.605867 ## Loading init Ramdisk from Legacy Image at 82000000 ...
412 18:04:38.611104 Image Name:
413 18:04:38.616942 Image Type: ARM Linux RAMDisk Image (uncompressed)
414 18:04:38.617541 Data Size: 11151641 Bytes = 10.6 MiB
415 18:04:38.622459 Load Address: 00000000
416 18:04:38.622993 Entry Point: 00000000
417 18:04:38.765348 Verifying Checksum ... OK
418 18:04:38.765895 ## Flattened Device Tree blob at 81f00000
419 18:04:38.771126 Booting using the fdt blob at 0x81f00000
420 18:04:38.862828 Loading Ramdisk to 8955d000, end 89fff919 ... OK
421 18:04:38.863529 Loading Device Tree to 8954a000, end 8955c782 ... OK
422 18:04:38.863981
423 18:04:38.867808 Starting kernel ...
424 18:04:38.868300
425 18:04:38.869171 end: 2.4.3 bootloader-commands (duration 00:00:35) [common]
426 18:04:38.869723 start: 2.4.4 auto-login-action (timeout 00:04:14) [common]
427 18:04:38.870163 Setting prompt string to ['Linux version [0-9]']
428 18:04:38.870622 Setting prompt string to ['Linux version [0-9]', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN']
429 18:04:38.871054 auto-login-action: Wait for prompt ['Linux version [0-9]', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:05:00)
430 18:04:44.466787 [ 0.000000] Booting Linux on physical CPU 0x0
431 18:04:44.472976 [ 0.000000] Initializing cgroup subsys cpuset
432 18:04:44.478680 [ 0.000000] Initializing cgroup subsys cpu
433 18:04:44.480633 [ 0.000000] Initializing cgroup subsys cpuacct
434 18:04:44.486911 start: 2.4.4.1 login-action (timeout 00:04:09) [common]
435 18:04:44.487166 The string '/ #' does not look like a typical prompt and could match status messages instead. Please check the job log files and use a prompt string which matches the actual prompt string more closely.
436 18:04:44.487369 Setting prompt string to ['-+\\[ cut here \\]-+\\s+(.*\\s+-+\\[ end trace (\\w*) \\]-+)', '(Unhandled fault.*)\\r\\n', 'Kernel panic - (.*) end Kernel panic', 'Stack:\\s+(.*\\s+-+\\[ end trace (\\w*) \\]-+)', '^[^\\n]+WARNING:.*?$', '^[^\\n]+Oops(?: -|:).*?$', '^[^\\n]+BUG:.*?$']
437 18:04:44.487540 Using line separator: #'\n'#
438 18:04:44.487679 No login prompt set.
439 18:04:44.487827 Parsing kernel messages
440 18:04:44.488000 ['-+\\[ cut here \\]-+\\s+(.*\\s+-+\\[ end trace (\\w*) \\]-+)', '(Unhandled fault.*)\\r\\n', 'Kernel panic - (.*) end Kernel panic', 'Stack:\\s+(.*\\s+-+\\[ end trace (\\w*) \\]-+)', '^[^\\n]+WARNING:.*?$', '^[^\\n]+Oops(?: -|:).*?$', '^[^\\n]+BUG:.*?$', '/ #', 'Login timed out', 'Login incorrect']
441 18:04:44.488215 [login-action] Waiting for messages, (timeout 00:04:09)
442 18:04:44.498805 [ 0.000000] Linux version 4.4.302-st28 (KernelCI@build-j870787-arm-gcc-10-omap2plus-defconfig-vfj4h) (gcc version 10.2.1 20210110 (Debian 10.2.1-6) ) #1 SMP Wed Jan 18 04:47:33 UTC 2023
443 18:04:44.504457 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
444 18:04:44.516571 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
445 18:04:44.522668 [ 0.000000] Machine model: TI OMAP3 BeagleBoard xM
446 18:04:44.522877 [ 0.000000] Malformed early option 'earlycon'
447 18:04:44.528269 [ 0.000000] cma: Reserved 16 MiB at 0x8e800000
448 18:04:44.534052 [ 0.000000] Memory policy: Data cache writeback
449 18:04:44.540070 [ 0.000000] CPU: All CPU(s) started in SVC mode.
450 18:04:44.546029 [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
451 18:04:44.551992 [ 0.000000] PERCPU: Embedded 13 pages/cpu @cfb38000 s20648 r8192 d24408 u53248
452 18:04:44.563681 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64448
453 18:04:44.575696 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp
454 18:04:44.581706 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
455 18:04:44.587835 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
456 18:04:44.593440 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
457 18:04:44.610919 [ 0.000000] Memory: 211100K/260096K available (6967K kernel code, 752K rwdata, 2228K rodata, 444K init, 8189K bss, 32612K reserved, 16384K cma-reserved, 0K highmem)
458 18:04:44.611389 [ 0.000000] Virtual kernel memory layout:
459 18:04:44.617114 [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
460 18:04:44.628503 [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
461 18:04:44.634222 [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
462 18:04:44.640190 [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
463 18:04:44.646019 [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
464 18:04:44.651753 [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
465 18:04:44.657853 [ 0.000000] .text : 0xc0008000 - 0xc0902efc (9196 kB)
466 18:04:44.663598 [ 0.000000] .init : 0xc0903000 - 0xc0972000 ( 444 kB)
467 18:04:44.669836 [ 0.000000] .data : 0xc0972000 - 0xc0a2e368 ( 753 kB)
468 18:04:44.675768 [ 0.000000] .bss : 0xc0a31000 - 0xc1230760 (8190 kB)
469 18:04:44.676529 [ 0.000000] Running RCU self tests
470 18:04:44.681555 [ 0.000000] Hierarchical RCU implementation.
471 18:04:44.687409 [ 0.000000] RCU lockdep checking is enabled.
472 18:04:44.693146 [ 0.000000] Build-time adjustment of leaf fanout to 32.
473 18:04:44.699075 [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
474 18:04:44.704876 [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
475 18:04:44.710748 [ 0.000000] NR_IRQS:16 nr_irqs:16 16
476 18:04:44.716682 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
477 18:04:44.722688 [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
478 18:04:44.728404 [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
479 18:04:44.740216 [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
480 18:04:44.746173 [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns
481 18:04:44.752185 [ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz
482 18:04:44.758005 [ 0.001678] Console: colour dummy device 80x30
483 18:04:44.764094 [ 0.001770] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
484 18:04:44.769787 [ 0.001770] ... MAX_LOCKDEP_SUBCLASSES: 8
485 18:04:44.775838 [ 0.001770] ... MAX_LOCK_DEPTH: 48
486 18:04:44.781774 [ 0.001800] ... MAX_LOCKDEP_KEYS: 8191
487 18:04:44.787497 [ 0.001800] ... CLASSHASH_SIZE: 4096
488 18:04:44.787755 [ 0.001831] ... MAX_LOCKDEP_ENTRIES: 32768
489 18:04:44.793607 [ 0.001831] ... MAX_LOCKDEP_CHAINS: 65536
490 18:04:44.799368 [ 0.001831] ... CHAINHASH_SIZE: 32768
491 18:04:44.805309 [ 0.001861] memory used by lock dependency info: 5167 kB
492 18:04:44.811177 [ 0.001861] per task-struct memory footprint: 1536 bytes
493 18:04:44.817277 [ 0.001892] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696)
494 18:04:44.823173 [ 0.106384] pid_max: default: 32768 minimum: 301
495 18:04:44.828976 [ 0.106933] Security Framework initialized
496 18:04:44.834933 [ 0.107116] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
497 18:04:44.840701 [ 0.107147] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
498 18:04:44.846814 [ 0.111175] Initializing cgroup subsys io
499 18:04:44.847091 [ 0.111297] Initializing cgroup subsys memory
500 18:04:44.852575 [ 0.111389] Initializing cgroup subsys devices
501 18:04:44.858586 [ 0.111572] Initializing cgroup subsys freezer
502 18:04:44.864666 [ 0.111663] Initializing cgroup subsys perf_event
503 18:04:44.870578 [ 0.111755] CPU: Testing write buffer coherency: ok
504 18:04:44.876518 [ 0.111938] CPU0: Spectre v2: using BPIALL workaround
505 18:04:44.882335 [ 0.113769] CPU0: thread -1, cpu 0, socket -1, mpidr 0
506 18:04:44.888275 [ 0.113922] Setting up static identity map for 0x80008280 - 0x800082f0
507 18:04:44.888793 [ 0.119262] Brought up 1 CPUs
508 18:04:44.894008 [ 0.119293] SMP: Total of 1 processors activated (594.73 BogoMIPS).
509 18:04:44.900120 [ 0.119293] CPU: All CPU(s) started in SVC mode.
510 18:04:44.905841 [ 0.124542] devtmpfs: initialized
511 18:04:44.912136 [ 0.243194] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
512 18:04:44.917715 [ 0.327636] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
513 18:04:44.929439 [ 0.330017] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
514 18:04:44.935226 [ 0.446990] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
515 18:04:44.941580 [ 0.447082] futex hash table entries: 256 (order: 2, 16384 bytes)
516 18:04:44.947269 [ 0.449737] pinctrl core: initialized pinctrl subsystem
517 18:04:44.953059 [ 0.456970] NET: Registered protocol family 16
518 18:04:44.958929 [ 0.464660] DMA: preallocated 256 KiB pool for atomic coherent allocations
519 18:04:44.964807 [ 0.467864] cpuidle: using governor ladder
520 18:04:44.970832 [ 0.467895] cpuidle: using governor menu
521 18:04:44.976841 [ 0.468536] Reprogramming SDRC clock to 400000000 Hz
522 18:04:44.988533 [ 0.482543] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/l4@48000000/scm@2000/pinmux@a00/pinmux_gpio1_pins, deferring probe
523 18:04:44.994453 [ 0.486907] OMAP GPIO hardware version 2.5
524 18:04:45.000379 [ 0.502471] irq: no irq domain found for /ocp/l4@48000000/scm@2000/pinmux@30 !
525 18:04:45.006116 [ 0.529266] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
526 18:04:45.012030 [ 0.529510] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
527 18:04:45.017934 [ 0.532379] platform 48058000.ssi-controller: Cannot lookup hwmod 'ssi'
528 18:04:45.023836 [ 0.544219] No ATAGs?
529 18:04:45.029896 [ 0.544250] hw-breakpoint: debug architecture 0x4 unsupported.
530 18:04:45.030240 [ 0.548156] OMAP DMA hardware revision 5.0
531 18:04:45.042105 [ 0.598724] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
532 18:04:45.042554 [ 0.606903] SCSI subsystem initialized
533 18:04:45.047497 [ 0.613555] omap_i2c 48070000.i2c: bus 0 rev4.4 at 2600 kHz
534 18:04:45.053497 [ 0.615600] omap_i2c 48072000.i2c: bus 1 rev4.4 at 400 kHz
535 18:04:45.059386 [ 0.617370] omap_i2c 48060000.i2c: bus 2 rev4.4 at 100 kHz
536 18:04:45.065336 [ 0.618011] pps_core: LinuxPPS API ver. 1 registered
537 18:04:45.077275 [ 0.618041] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
538 18:04:45.082879 [ 0.618133] PTP clock support registered
539 18:04:45.088967 [ 0.623626] clocksource: Switched to clocksource 32k_counter
540 18:04:45.089212 [ 0.826110] NET: Registered protocol family 2
541 18:04:45.100982 [ 0.826751] IP idents hash table entries: 4096 (order: 3, 32768 bytes)
542 18:04:45.106603 [ 0.829010] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
543 18:04:45.112626 [ 0.829101] TCP bind hash table entries: 2048 (order: 4, 73728 bytes)
544 18:04:45.118330 [ 0.829589] TCP: Hash tables configured (established 2048 bind 2048)
545 18:04:45.124327 [ 0.829833] UDP hash table entries: 256 (order: 2, 20480 bytes)
546 18:04:45.130171 [ 0.829986] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
547 18:04:45.136085 [ 0.830718] NET: Registered protocol family 1
548 18:04:45.142108 [ 0.832855] RPC: Registered named UNIX socket transport module.
549 18:04:45.148184 [ 0.832885] RPC: Registered udp transport module.
550 18:04:45.153795 [ 0.832916] RPC: Registered tcp transport module.
551 18:04:45.159773 [ 0.832916] RPC: Registered tcp NFSv4.1 backchannel transport module.
552 18:04:45.165666 [ 0.838867] Trying to unpack rootfs image as initramfs...
553 18:04:45.171571 [ 2.302917] Freeing initrd memory: 10892K
554 18:04:45.177840 [ 2.304412] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
555 18:04:45.183461 [ 2.312774] audit: initializing netlink subsys (disabled)
556 18:04:45.189300 [ 2.313079] audit: type=2000 audit(2.291:1): initialized
557 18:04:45.196273 [ 2.319458] VFS: Disk quotas dquot_6.6.0
558 18:04:45.201390 [ 2.319854] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
559 18:04:45.207098 [ 2.322998] NFS: Registering the id_resolver key type
560 18:04:45.213160 [ 2.323730] Key type id_resolver registered
561 18:04:45.213930 [ 2.323730] Key type id_legacy registered
562 18:04:45.225058 [ 2.324035] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
563 18:04:45.225484 [ 2.331817] io scheduler noop registered
564 18:04:45.230911 [ 2.331878] io scheduler deadline registered
565 18:04:45.236604 [ 2.331939] io scheduler cfq registered (default)
566 18:04:45.242508 [ 2.336090] pinctrl-single 48002030.pinmux: 284 pins at pa fa002030 size 568
567 18:04:45.248414 [ 2.336883] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
568 18:04:45.260179 [ 2.338348] pinctrl-single 480025a0.pinmux: 46 pins at pa fa0025a0 size 92
569 18:04:45.266019 [ 2.346191] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
570 18:04:45.272089 [ 2.357269] omap_uart 4806a000.serial: no wakeirq for uart0
571 18:04:45.277789 [ 2.358062] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a OMAP UART0
572 18:04:45.283817 [ 2.360473] omap_uart 4806c000.serial: no wakeirq for uart1
573 18:04:45.295821 [ 2.360931] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a OMAP UART1
574 18:04:45.310382 [ 2.363342] 49020000.serial: ttyO2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a OMAP UART2
575 18:04:45.310629 [ 3.207427] console [ttyO2] enabled
576 18:04:45.316795 [ 3.213470] omap_uart 49042000.serial: no wakeirq for uart3
577 18:04:45.329048 [ 3.219909] 49042000.serial: ttyO3 at MMIO 0x49042000 (irq = 96, base_baud = 3000000) is a OMAP UART3
578 18:04:45.383783 [ 3.280883] brd: module loaded
579 18:04:45.418426 [ 3.315551] loop: module loaded
580 18:04:45.443376 [ 3.341033] twl 0-0048: PIH (irq 23) chaining IRQs 307..315
581 18:04:45.453169 [ 3.347534] twl 0-0048: power (irq 312) chaining IRQs 315..322
582 18:04:45.522399 [ 3.415313] twl4030_gpio twl4030-gpio: gpio (irq 307) chaining IRQs 323..340
583 18:04:45.603262 [ 3.496948] mtdoops: mtd device (mtddev=name/number) must be supplied
584 18:04:45.627383 [ 3.524963] mousedev: PS/2 mouse device common for all mice
585 18:04:45.634099 [ 3.530883] i2c /dev entries driver
586 18:04:45.696419 [ 3.584655] ledtrig-cpu: registered to indicate activity on CPUs
587 18:04:45.697687 [ 3.593170] oprofile: using arm/armv7
588 18:04:45.702691 [ 3.598144] Initializing XFRM netlink socket
589 18:04:45.707322 [ 3.603240] NET: Registered protocol family 10
590 18:04:45.716655 [ 3.612457] sit: IPv6 over IPv4 tunneling driver
591 18:04:45.723092 [ 3.620758] NET: Registered protocol family 17
592 18:04:45.729407 [ 3.625671] NET: Registered protocol family 15
593 18:04:45.735875 [ 3.630859] Key type dns_resolver registered
594 18:04:45.742801 [ 3.635772] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
595 18:04:45.747661 [ 3.643402] omap2_set_init_voltage: unable to set vdd_mpu_iva
596 18:04:45.753796 [ 3.649566] omap2_set_init_voltage: unable to find boot up OPP for vdd_core
597 18:04:45.762113 [ 3.656951] omap2_set_init_voltage: unable to set vdd_core
598 18:04:45.770401 [ 3.667938] ThumbEE CPU extension supported.
599 18:04:45.776491 [ 3.672515] Registering SWP/SWPB emulation handler
600 18:04:45.781483 [ 3.677673] SmartReflex Class3 initialized
601 18:04:45.812836 [ 3.709197] hctosys: unable to open rtc device (rtc0)
602 18:04:45.818415 [ 3.714721] sr_init: No PMIC hook to init smartreflex
603 18:04:45.831086 [ 3.720703] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
604 18:04:45.837785 [ 3.729919] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
605 18:04:46.015767 [ 3.907836] mmc0: host does not support reading read-only switch, assuming write-enable
606 18:04:46.029502 [ 3.922882] mmc0: new high speed SDHC card at address aaaa
607 18:04:46.036395 [ 3.932220] mmcblk0: mmc0:aaaa SS08G 7.40 GiB
608 18:04:46.049323 [ 3.946868] mmcblk0: p1 p2
609 18:04:58.038488 [ 15.935150] VAUX3: disabling
610 18:04:58.047014 [ 15.939270] VDAC: disabling
611 18:04:58.047236 [ 15.943969] VUSB3V1: disabling
612 18:04:58.052692 [ 15.947967] VPLL2: disabling
613 18:04:58.052899 [ 15.951507] hsusb2_vbus: disabling
614 18:04:58.064686 [ 15.960540] Freeing unused kernel memory: 444K
615 18:04:58.179823 [ 16.075744] devpts: called with bogus options
616 18:04:58.329411 Starting syslogd: OK
617 18:04:58.382592 Starting klogd: OK
618 18:04:58.564994 Running sysctl: OK
619 18:04:58.619459 Populating /dev using udev: [ 16.515014] udevd[102]: starting version 3.2.9
620 18:04:58.633076 [ 16.522857] random: udevd: uninitialized urandom read (16 bytes read, 33 bits of entropy available)
621 18:04:58.645284 [ 16.534454] random: udevd: uninitialized urandom read (16 bytes read, 33 bits of entropy available)
622 18:04:58.653549 [ 16.544464] random: udevd: uninitialized urandom read (16 bytes read, 33 bits of entropy available)
623 18:04:58.675482 [ 16.572448] udevd[102]: specified user 'tss' unknown
624 18:04:58.683087 [ 16.578369] udevd[102]: specified group 'tss' unknown
625 18:04:58.710981 [ 16.606964] udevd[103]: starting eudev-3.2.9
626 18:04:59.440256 [ 17.330078] 48050000.dss supply vdda_video not found, using dummy regulator
627 18:04:59.440558 [ 17.338500] OMAP DSS rev 2.0
628 18:04:59.452586 [ 17.342315] omapdss_dss 48050000.dss: bound 48050400.dispc (ops dispc_component_ops [omapdss])
629 18:04:59.460940 [ 17.352081] omapdss_dss 48050000.dss: bound 48050c00.encoder (ops venc_component_ops [omapdss])
630 18:04:59.664418 [ 17.556091] omap_ssi 48058000.ssi-controller: _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info
631 18:04:59.670300 [ 17.566436] ssi0: runtime PM failed -19
632 18:04:59.725387 [ 17.621856] usbcore: registered new interface driver usbfs
633 18:04:59.731315 [ 17.628540] usbcore: registered new interface driver hub
634 18:04:59.739660 [ 17.634582] usbcore: registered new device driver usb
635 18:04:59.778288 [ 17.672332] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
636 18:04:59.839939 [ 17.725646] twl4030_keypad 48070000.i2c:twl@48:keypad: OF: linux,keymap property not defined in /ocp/i2c@48070000/twl@48/keypad
637 18:04:59.845692 [ 17.737884] twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap
638 18:04:59.853119 [ 17.745574] twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -2
639 18:04:59.910780 [ 17.807159] ohci-omap3: OHCI OMAP3 driver
640 18:04:59.917729 [ 17.812530] ohci-omap3 48064400.ohci: OHCI Host Controller
641 18:04:59.925014 [ 17.819549] ohci-omap3 48064400.ohci: new USB bus registered, assigned bus number 1
642 18:05:00.017259 [ 17.909851] twl4030_bci 48070000.i2c:twl@48:bci: could not request vac iio channel
643 18:05:00.041725 [ 17.931884] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
644 18:05:00.048021 [ 17.939025] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
645 18:05:00.117303 [ 18.004608] input: twl4030_pwrbutton as /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:pwrbutton/input/input1
646 18:05:00.157254 [ 18.051544] ohci-omap3 48064400.ohci: irq 92, io mem 0x48064400
647 18:05:00.270988 [ 18.165924] ehci-omap: OMAP-EHCI Host Controller driver
648 18:05:00.413038 [ 18.304779] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
649 18:05:00.419018 [ 18.311981] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
650 18:05:00.424904 [ 18.319732] usb usb1: Product: OHCI Host Controller
651 18:05:00.430732 [ 18.324951] usb usb1: Manufacturer: Linux 4.4.302-st28 ohci_hcd
652 18:05:00.435551 [ 18.331207] usb usb1: SerialNumber: 48064400.ohci
653 18:05:00.485566 [ 18.379211] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
654 18:05:00.522095 [ 18.419281] HS USB OTG: no transceiver configured
655 18:05:00.535648 [ 18.424499] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517
656 18:05:00.541757 [ 18.434783] HS USB OTG: no transceiver configured
657 18:05:00.547373 [ 18.439758] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517
658 18:05:00.558668 [ 18.453247] twl_rtc 48070000.i2c:twl@48:rtc: Enabling TWL-RTC
659 18:05:00.605603 [ 18.497222] twl_rtc 48070000.i2c:twl@48:rtc: rtc core: registered 48070000.i2c:twl@48 as rtc0
660 18:05:00.655010 [ 18.549804] Driver for 1-wire Dallas network protocol.
661 18:05:00.677484 [ 18.574798] HS USB OTG: no transceiver configured
662 18:05:00.687465 [ 18.579803] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517
663 18:05:00.720427 [ 18.617004] hub 1-0:1.0: USB hub found
664 18:05:00.775250 [ 18.667449] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.5. Driver in Interrupt mode
665 18:05:00.798239 [ 18.693908] hub 1-0:1.0: 3 ports detected
666 18:05:00.810565 [ 18.702392] twl4030_usb 48070000.i2c:twl@48:twl4030-usb: Initialized TWL4030 USB module
667 18:05:00.864315 [ 18.758697] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
668 18:05:00.935508 [ 18.827758] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 2
669 18:05:00.989579 [ 18.884185] ehci-omap 48064800.ehci: EHCI Host Controller
670 18:05:01.003940 [ 18.897033] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
671 18:05:01.043085 [ 18.934448] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
672 18:05:01.048590 [ 18.941650] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
673 18:05:01.054745 [ 18.949401] usb usb2: Product: MUSB HDRC host driver
674 18:05:01.060560 [ 18.954711] usb usb2: Manufacturer: Linux 4.4.302-st28 musb-hcd
675 18:05:01.065661 [ 18.960968] usb usb2: SerialNumber: musb-hdrc.0.auto
676 18:05:01.250877 [ 19.144805] connector-dvi connector@0: failed to find video source
677 18:05:01.290852 [ 19.182281] w1_master_driver w1_bus_master1: Family 1 for 01.000000000000.3d is not registered.
678 18:05:01.353479 [ 19.246978] input: gpio_keys as /devices/platform/gpio_keys/input/input2
679 18:05:01.383739 [ 19.280151] hub 2-0:1.0: USB hub found
680 18:05:01.433279 [ 19.329650] hub 2-0:1.0: 1 port detected
681 18:05:01.485718 [ 19.378204] ehci-omap 48064800.ehci: new USB bus registered, assigned bus number 3
682 18:05:01.506734 [ 19.399993] 48050000.dss supply vdds_dsi not found, using dummy regulator
683 18:05:01.544999 [ 19.439422] ehci-omap 48064800.ehci: irq 93, io mem 0x48064800
684 18:05:01.589271 [ 19.478088] Console: switching to colour frame buffer device 80x30
685 18:05:01.647009 [ 19.502624] ehci-omap 48064800.ehci: USB 2.0 started, EHCI 1.00
686 18:05:01.671934 [ 19.504241] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
687 18:05:01.677862 [ 19.504272] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
688 18:05:01.750159 [ 19.504272] usb usb3: Product: EHCI Host Controller
689 18:05:01.758497 [ 19.504272] usb usb3: Manufacturer: Linux 4.4.302-st28 ehci_hcd
690 18:05:01.806423 [ 19.504302] usb usb3: SerialNumber: 48064800.ehci
691 18:05:01.811886 [ 19.510498] hub 3-0:1.0: USB hub found
692 18:05:01.816262 [ 19.512512] hub 3-0:1.0: 3 ports detected
693 18:05:01.843000 [ 19.734161] omapdss DPI: Could not find exact pixel clock. Requested 23500000 Hz, got 24000000 Hz
694 18:05:01.851370 [ 19.749267] omapfb omapfb: using display 'dvi' mode 640x480
695 18:05:01.862582 [ 19.756103] usb 3-2: new high-speed USB device number 2 using ehci-omap
696 18:05:01.975156 [ 19.868530] omap-twl4030 sound: twl4030-hifi <-> 49022000.mcbsp mapping ok
697 18:05:02.033835 [ 19.925567] usb 3-2: New USB device found, idVendor=0424, idProduct=9514
698 18:05:02.039474 [ 19.932617] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
699 18:05:02.113153 [ 20.009399] hub 3-2:1.0: USB hub found
700 18:05:02.135661 [ 20.032043] hub 3-2:1.0: 5 ports detected
701 18:05:02.440926 [ 20.333923] usb 3-2.1: new high-speed USB device number 3 using ehci-omap
702 18:05:02.573198 [ 20.464874] usb 3-2.1: New USB device found, idVendor=0424, idProduct=ec00
703 18:05:02.579176 [ 20.472106] usb 3-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
704 18:05:02.617603 [ 20.514953] smsc95xx v1.0.4
705 18:05:02.724329 [ 20.609680] smsc95xx 3-2.1:1.0 eth0: register 'smsc95xx' at usb-48064800.ehci-2.1, smsc95xx USB 2.0 Ethernet, a6:45:39:2e:c7:ef
706 18:05:02.726929 [ 20.622497] usbcore: registered new interface driver smsc95xx
707 18:05:02.761709 done
708 18:05:02.848464 Saving random seed: [ 20.739593] random: dd: uninitialized urandom read (512 bytes read, 63 bits of entropy available)
709 18:05:02.852649 OK
710 18:05:03.029701 Starting network: OK
711 18:05:03.162554 Starting dropbear sshd: [ 21.053283] random: dropbear: uninitialized urandom read (32 bytes read, 64 bits of entropy available)
712 18:05:03.180637 OK
713 18:05:03.231380 /bin/sh: can't access tty; job control turned off
714 18:05:03.232707 Matched prompt #7: / #
716 18:05:03.233128 Setting prompt string to ['/ #']
717 18:05:03.233293 end: 2.4.4.1 login-action (duration 00:00:19) [common]
719 18:05:03.233644 end: 2.4.4 auto-login-action (duration 00:00:24) [common]
720 18:05:03.233805 start: 2.4.5 expect-shell-connection (timeout 00:03:50) [common]
721 18:05:03.233925 Setting prompt string to ['/ #']
722 18:05:03.234034 Forcing a shell prompt, looking for ['/ #']
724 18:05:03.284539 / #
725 18:05:03.284804 expect-shell-connection: Wait for prompt ['/ #'] (timeout 00:05:00)
726 18:05:03.284987 Waiting using forced prompt support (timeout 00:02:30)
727 18:05:03.292387
728 18:05:03.292829 end: 2.4.5 expect-shell-connection (duration 00:00:00) [common]
729 18:05:03.293010 start: 2.4.6 export-device-env (timeout 00:03:50) [common]
730 18:05:03.293179 end: 2.4.6 export-device-env (duration 00:00:00) [common]
731 18:05:03.293330 end: 2.4 uboot-commands (duration 00:01:10) [common]
732 18:05:03.293480 end: 2 uboot-action (duration 00:01:10) [common]
733 18:05:03.293631 start: 3 lava-test-retry (timeout 00:01:00) [common]
734 18:05:03.293813 start: 3.1 lava-test-shell (timeout 00:01:00) [common]
735 18:05:03.293937 Using namespace: common
737 18:05:03.394793 / # #
738 18:05:03.395075 lava-test-shell: Wait for prompt ['/ #'] (timeout 00:01:00)
739 18:05:03.401449 #
740 18:05:03.401870 Using /lava-3154458
742 18:05:03.502723 / # export SHELL=/bin/sh
743 18:05:03.509544 export SHELL=/bin/sh
745 18:05:03.610741 / # . /lava-3154458/environment
746 18:05:03.617604 . /lava-3154458/environment
748 18:05:03.718879 / # /lava-3154458/bin/lava-test-runner /lava-3154458/0
749 18:05:03.719342 Test shell timeout: 10s (minimum of the action and connection timeout)
750 18:05:03.725758 /lava-3154458/bin/lava-test-runner /lava-3154458/0
751 18:05:04.037477 + export 'TESTRUN_ID=0_dmesg'
752 18:05:04.041679 + cd /lava-3154458/0/tests/0_dmesg
753 18:05:04.042238 + cat uuid
754 18:05:04.054490 + UUID=3154458_1.5.2.4.1
755 18:05:04.055050 + set +x
756 18:05:04.060325 [ 21.953063] <LAVA_SIGNAL_STARTRUN 0_dmesg 3154458_1.5.2.4.1>
757 18:05:04.060901 Received signal: <STARTRUN> 0_dmesg 3154458_1.5.2.4.1
758 18:05:04.061212 Starting test lava.0_dmesg (3154458_1.5.2.4.1)
759 18:05:04.061581 Skipping test definition patterns.
760 18:05:04.065342 + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh
761 18:05:04.178412 [ 22.070251] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=crit RESULT=pass UNITS=lines MEASUREMENT=0>
762 18:05:04.178861 Received signal: <TESTCASE> TEST_CASE_ID=crit RESULT=pass UNITS=lines MEASUREMENT=0
764 18:05:04.282258 [ 22.173828] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=alert RESULT=pass UNITS=lines MEASUREMENT=0>
765 18:05:04.282734 Received signal: <TESTCASE> TEST_CASE_ID=alert RESULT=pass UNITS=lines MEASUREMENT=0
767 18:05:04.385866 [ 22.277465] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=emerg RESULT=pass UNITS=lines MEASUREMENT=0>
768 18:05:04.386395 Received signal: <TESTCASE> TEST_CASE_ID=emerg RESULT=pass UNITS=lines MEASUREMENT=0
770 18:05:04.391792 + set +x
771 18:05:04.395626 [ 22.290191] <LAVA_SIGNAL_ENDRUN 0_dmesg 3154458_1.5.2.4.1>
772 18:05:04.396110 Received signal: <ENDRUN> 0_dmesg 3154458_1.5.2.4.1
773 18:05:04.396336 Ending use of test pattern.
774 18:05:04.396514 Ending test lava.0_dmesg (3154458_1.5.2.4.1), duration 0.34
776 18:05:04.402972 <LAVA_TEST_RUNNER EXIT>
777 18:05:04.403395 ok: lava_test_shell seems to have completed
778 18:05:04.403619 alert: pass
crit: pass
emerg: pass
779 18:05:04.403794 end: 3.1 lava-test-shell (duration 00:00:01) [common]
780 18:05:04.404079 end: 3 lava-test-retry (duration 00:00:01) [common]
781 18:05:04.404289 start: 4 lava-test-retry (timeout 00:01:00) [common]
782 18:05:04.404445 start: 4.1 lava-test-shell (timeout 00:01:00) [common]
783 18:05:04.404570 Using namespace: common
785 18:05:04.505434 / # #
786 18:05:04.505770 lava-test-shell: Wait for prompt ['/ #'] (timeout 00:01:00)
787 18:05:04.506008 Using /lava-3154458
789 18:05:04.606870 export SHELL=/bin/sh
790 18:05:04.607321 #
792 18:05:04.708589 / # export SHELL=/bin/sh. /lava-3154458/environment
793 18:05:04.709461
795 18:05:04.811252 / # . /lava-3154458/environment/lava-3154458/bin/lava-test-runner /lava-3154458/1
796 18:05:04.811803 Test shell timeout: 10s (minimum of the action and connection timeout)
797 18:05:04.812481
798 18:05:04.817253 / # /lava-3154458/bin/lava-test-runner /lava-3154458/1
799 18:05:05.011080 + export 'TESTRUN_ID=1_bootrr'
800 18:05:05.017534 + cd /lava-3154458/1/tests/1_bootrr
801 18:05:05.017757 + cat uuid
802 18:05:05.032977 + UUID=3154458_1.5.2.4.5
803 18:05:05.033213 + set +x
804 18:05:05.039611 [ 22.932464] <LAVA_SIGNAL_STARTRUN 1_bootrr 3154458_1.5.2.4.5>
805 18:05:05.040051 Received signal: <STARTRUN> 1_bootrr 3154458_1.5.2.4.5
806 18:05:05.040219 Starting test lava.1_bootrr (3154458_1.5.2.4.5)
807 18:05:05.040410 Skipping test definition patterns.
808 18:05:05.051251 + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-3154458/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin'
809 18:05:05.051488 + cd /opt/bootrr/libexec/bootrr
810 18:05:05.055037 + sh helpers/bootrr-auto
811 18:05:05.103711 /lava-3154458/1/../bin/lava-test-case
812 18:05:05.144797 [ 23.037597] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=deferred-probe-empty RESULT=skip>
813 18:05:05.145232 Received signal: <TESTCASE> TEST_CASE_ID=deferred-probe-empty RESULT=skip
815 18:05:05.227043 /lava-3154458/1/../bin/lava-test-case
816 18:05:05.259675 [ 23.152526] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=all-cpus-are-online RESULT=pass>
817 18:05:05.260141 Received signal: <TESTCASE> TEST_CASE_ID=all-cpus-are-online RESULT=pass
819 18:05:05.280303 /lava-3154458/1/../bin/lava-test-case
820 18:05:05.312795 [ 23.205657] <LAVA_SIGNAL_TESTCASE TEST_CASE_ID=tpm-chip-is-online RESULT=skip>
821 18:05:05.313210 Received signal: <TESTCASE> TEST_CASE_ID=tpm-chip-is-online RESULT=skip
823 18:05:05.353841 + set +x
824 18:05:05.357550 [ 23.252105] <LAVA_SIGNAL_ENDRUN 1_bootrr 3154458_1.5.2.4.5>
825 18:05:05.357993 Received signal: <ENDRUN> 1_bootrr 3154458_1.5.2.4.5
826 18:05:05.358177 Ending use of test pattern.
827 18:05:05.358297 Ending test lava.1_bootrr (3154458_1.5.2.4.5), duration 0.32
829 18:05:05.364531 <LAVA_TEST_RUNNER EXIT>
830 18:05:05.365045 ok: lava_test_shell seems to have completed
831 18:05:05.365408 all-cpus-are-online: pass
deferred-probe-empty: skip
tpm-chip-is-online: skip
832 18:05:05.365659 end: 4.1 lava-test-shell (duration 00:00:01) [common]
833 18:05:05.365924 end: 4 lava-test-retry (duration 00:00:01) [common]
834 18:05:05.366191 start: 5 finalize (timeout 00:08:39) [common]
835 18:05:05.366447 start: 5.1 power-off (timeout 00:00:30) [common]
836 18:05:05.366871 Calling: 'nice' '/usr/local/bin/labgrid-client' '-x' 'ws://nuc-1:20408/ws' '-p' 'omap3-beagle-xm' 'power' 'off'
837 18:05:07.352439 Returned 0 in 1 seconds
838 18:05:07.453869 end: 5.1 power-off (duration 00:00:02) [common]
840 18:05:07.456048 start: 5.2 read-feedback (timeout 00:08:37) [common]
841 18:05:07.457102 Listened to connection for namespace 'common' for up to 1s
842 18:05:08.461809 Finalising connection for namespace 'common'
843 18:05:08.462190 Disconnecting from shell: Finalise
844 18:05:08.462459 / #
845 18:05:08.563432 end: 5.2 read-feedback (duration 00:00:01) [common]
846 18:05:08.563806 end: 5 finalize (duration 00:00:03) [common]
847 18:05:08.564150 Cleaning after the job
848 18:05:08.564418 Cleaning up download directory: /var/lib/lava/dispatcher/tmp/3154458/tftp-deploy-kkl_933t/ramdisk
849 18:05:08.567454 Cleaning up download directory: /var/lib/lava/dispatcher/tmp/3154458/tftp-deploy-kkl_933t/kernel
850 18:05:08.568876 Cleaning up download directory: /var/lib/lava/dispatcher/tmp/3154458/tftp-deploy-kkl_933t/dtb
851 18:05:08.569425 Cleaning up download directory: /var/lib/lava/dispatcher/tmp/3154458/tftp-deploy-kkl_933t/modules
852 18:05:08.572204 Override tmp directory removed at /var/lib/lava/dispatcher/tmp/3154458
853 18:05:08.625927 Root tmp directory removed at /var/lib/lava/dispatcher/tmp/3154458
854 18:05:08.626300 Job finished correctly