Trying 192.168.1.205... Connected to ts5. Escape character is '^]'. ser2net port telnet,2000 device serialdev,/dev/ttyUSB-lf-bbb-01,115200n81,local [] (Debian GNU/Linux) U-Boot SPL 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) Trying to boot from MMC2 U-Boot 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2 0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 172.16.3.146 (141 ms) => setenv serverip 172.16.3.3 setenv serverip 172.16.3.3 => tftp 0x82000000 1089068/tftp-deploy-zcqf8yeh/kernel/zImage tftp 0x82000000 1089068/tftp-deploy-zcqf8yeh/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.146 Filename '1089068/tftp-deploy-zcqf8yeh/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 4.4 MiB 3.7 MiB/s done Bytes transferred = 4615872 (466ec0 hex) => tftp 0x83000000 1089068/tftp-deploy-zcqf8yeh/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1089068/tftp-deploy-zcqf8yeh/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.146 Filename '1089068/tftp-deploy-zcqf8yeh/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 13.5 MiB 3.7 MiB/s done Bytes transferred = 14166874 (d82b5a hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1089068/tftp-deploy-zcqf8yeh/dtb/am335x-boneblack.dtb tftp 0x88000000 1089068/tftp-deploy-zcqf8yeh/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.146 Filename '1089068/tftp-deploy-zcqf8yeh/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 61.4 KiB 3.2 MiB/s done Bytes transferred = 62861 (f58d hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x466ec0 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2024-02-06 2:08:38 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 14166810 Bytes = 13.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801258c Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.209-cip44-rt18 (KernelCI@build-j99514-arm-gcc-10-omap2plus-defconfig-wsrcs) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Feb 6 01:36:06 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] On node 0 totalpages: 130560 [ 0.000000] Normal zone: 1148 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 16 pages/cpu s33484 r8192 d23860 u65536 [ 0.000000] pcpu-alloc: s33484 r8192 d23860 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 472036K/522240K available (9216K kernel code, 1044K rwdata, 2180K rodata, 1024K init, 272K bss, 33820K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008338] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018547] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030205] Console: colour dummy device 80x30 <3>[ 0.035079] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042135] This ensures that you still see kernel messages. Please <3>[ 0.048860] update your kernel commandline. <6>[ 0.053457] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095544] CPU: Testing write buffer coherency: ok <6>[ 0.100922] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106388] pid_max: default: 32768 minimum: 301 <6>[ 0.111551] LSM: Security Framework initializing <6>[ 0.116644] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.124460] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.134104] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.140639] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.147841] rcu: Hierarchical SRCU implementation. <6>[ 0.153610] smp: Bringing up secondary CPUs ... <6>[ 0.158543] smp: Brought up 1 node, 1 CPU <6>[ 0.162971] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.169702] CPU: All CPU(s) started in SVC mode. <6>[ 0.175413] devtmpfs: initialized <6>[ 0.191393] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.199928] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.210376] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.218930] pinctrl core: initialized pinctrl subsystem <6>[ 0.226481] NET: Registered protocol family 16 <6>[ 0.234247] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.260669] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.266757] audit: initializing netlink subsys (disabled) <6>[ 0.273825] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.273839] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.273843] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.274112] cpuidle: using governor menu <5>[ 1.159161] audit: type=2000 audit(0.230:1): state=initialized audit_enabled=0 res=1 <6>[ 1.283447] No ATAGs? <6>[ 1.286076] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.310622] Kprobes globally optimized <7>[ 1.321017] reg-fixed-voltage fixedregulator0: GPIO lookup for consumer (null) <7>[ 1.328748] reg-fixed-voltage fixedregulator0: using device tree for GPIO lookup <7>[ 1.336761] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/fixedregulator0[0]' <7>[ 1.346124] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator0[0]' <7>[ 1.355371] reg-fixed-voltage fixedregulator0: using lookup tables for GPIO lookup <7>[ 1.363443] reg-fixed-voltage fixedregulator0: No GPIO consumer (null) found <6>[ 1.373720] iommu: Default domain type: Translated <6>[ 1.381021] vgaarb: loaded <5>[ 1.384611] SCSI subsystem initialized <7>[ 1.389235] libata version 3.00 loaded. <6>[ 1.393988] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.399472] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.409192] PTP clock support registered <6>[ 1.414753] clocksource: Switched to clocksource dmtimer <5>[ 2.052380] VFS: Disk quotas dquot_6.6.0 <6>[ 2.056882] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 2.073716] NET: Registered protocol family 2 <6>[ 2.078897] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.087551] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.096510] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.104806] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.112468] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.119402] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.126438] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.134041] NET: Registered protocol family 1 <6>[ 2.139867] RPC: Registered named UNIX socket transport module. <6>[ 2.146329] RPC: Registered udp transport module. <6>[ 2.151437] RPC: Registered tcp transport module. <6>[ 2.156560] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.163464] PCI: CLS 0 bytes, default 64 <6>[ 2.168511] Trying to unpack rootfs image as initramfs... <6>[ 3.155399] Freeing initrd memory: 13836K <6>[ 3.160981] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 3.171415] Initialise system trusted keyrings <6>[ 3.176922] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 3.185150] NFS: Registering the id_resolver key type <5>[ 3.190699] Key type id_resolver registered <5>[ 3.195321] Key type id_legacy registered <6>[ 3.199769] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 3.207742] Key type asymmetric registered <5>[ 3.212236] Asymmetric key parser 'x509' registered <6>[ 3.217576] io scheduler mq-deadline registered <6>[ 3.222505] io scheduler kyber registered <3>[ 3.359861] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.368572] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.476825] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 3.518734] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 3.590195] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.598900] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 3.658571] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.667268] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 3.684619] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.693332] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 3.756875] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 3.765409] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 3.792406] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <7>[ 3.801356] gpio-clk clk_mcasp0: GPIO lookup for consumer enable <7>[ 3.807920] gpio-clk clk_mcasp0: using device tree for GPIO lookup <7>[ 3.814573] gpio-clk clk_mcasp0: No GPIO consumer enable found <6>[ 3.826461] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <7>[ 3.837369] omap8250 44e09000.serial: GPIO lookup for consumer rs485-term <7>[ 3.844780] omap8250 44e09000.serial: using device tree for GPIO lookup <7>[ 3.851873] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' <7>[ 3.866970] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ocp/interconnect@44c00000/segment@200000/target-module@9000/serial@0[0]' <7>[ 3.881959] omap8250 44e09000.serial: using lookup tables for GPIO lookup <7>[ 3.889228] omap8250 44e09000.serial: No GPIO consumer rs485-term found <6>[ 3.896358] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 3.905778] printk: console [ttyS0] enabled <6>[ 3.905778] printk: console [ttyS0] enabled <6>[ 3.914841] printk: bootconsole [omap8250] disabled <6>[ 3.914841] printk: bootconsole [omap8250] disabled <6>[ 3.938842] brd: module loaded <6>[ 3.949598] loop: module loaded <3>[ 3.955291] mtdoops: mtd device (mtddev=name/number) must be supplied <7>[ 3.964316] mdio_bus fixed-0: GPIO lookup for consumer reset <7>[ 3.970387] mdio_bus fixed-0: using lookup tables for GPIO lookup <7>[ 3.976798] mdio_bus fixed-0: No GPIO consumer reset found <7>[ 3.987142] mdio_bus 4a101000.mdio: GPIO lookup for consumer reset <7>[ 3.993641] mdio_bus 4a101000.mdio: using device tree for GPIO lookup <7>[ 4.000515] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' <7>[ 4.015598] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000[0]' <7>[ 4.030580] mdio_bus 4a101000.mdio: using lookup tables for GPIO lookup <7>[ 4.037504] mdio_bus 4a101000.mdio: No GPIO consumer reset found <6>[ 4.094698] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <7>[ 4.136106] mdio_bus 4a101000.mdio:00: GPIO lookup for consumer reset <7>[ 4.142884] mdio_bus 4a101000.mdio:00: using device tree for GPIO lookup <7>[ 4.150004] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0[0]' <7>[ 4.166424] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/interconnect@4a000000/segment@0/target-module@100000/ethernet@0/mdio@1000/ethernet-phy@0[0]' <7>[ 4.182719] mdio_bus 4a101000.mdio:00: using lookup tables for GPIO lookup <7>[ 4.189906] mdio_bus 4a101000.mdio:00: No GPIO consumer reset found <6>[ 4.197725] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 4.207620] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 4.214277] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 4.220074] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) <6>[ 4.227658] cpsw 4a100000.ethernet: Detected MACID = 34:03:de:5e:2c:05 <6>[ 4.236724] i2c /dev entries driver <5>[ 4.242223] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 4.250149] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.256695] sdhci: Copyright(c) Pierre Ossman <6>[ 4.262055] sdhci-pltfm: SDHCI platform and OF driver helper <7>[ 4.269078] sdhci-omap 48060000.mmc: GPIO lookup for consumer cd <7>[ 4.275485] sdhci-omap 48060000.mmc: using device tree for GPIO lookup <7>[ 4.282330] sdhci-omap 48060000.mmc: No GPIO consumer cd found <7>[ 4.289383] sdhci-omap 481d8000.mmc: GPIO lookup for consumer wp <7>[ 4.295788] sdhci-omap 481d8000.mmc: using device tree for GPIO lookup <7>[ 4.302621] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' <7>[ 4.316522] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/interconnect@48000000/segment@100000/target-module@d8000/mmc@0[0]' <7>[ 4.330282] sdhci-omap 481d8000.mmc: using lookup tables for GPIO lookup <7>[ 4.337295] sdhci-omap 481d8000.mmc: No GPIO consumer wp found <4>[ 4.343583] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.352130] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 4.360468] Initializing XFRM netlink socket <6>[ 4.365292] NET: Registered protocol family 10 <6>[ 4.371497] Segment Routing with IPv6 <6>[ 4.375630] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.382594] NET: Registered protocol family 17 <6>[ 4.387424] NET: Registered protocol family 15 <5>[ 4.392266] Key type dns_resolver registered <6>[ 4.397464] oprofile: using arm/armv7 <6>[ 4.401510] ThumbEE CPU extension supported. <5>[ 4.406145] Registering SWP/SWPB emulation handler <3>[ 4.411617] omap_voltage_late_init: Voltage driver support not added <3>[ 4.418331] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize <3>[ 4.426764] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize <6>[ 4.435440] SmartReflex Class3 initialized <6>[ 4.442045] printk: console [ttyS0]: printing thread started <5>[ 4.442128] Loading compiled-in X.509 certificates <6>[ 4.461368] OMAP GPIO hardware version 0.1 <6>[ 4.477916] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <4>[ 4.505416] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 4.512887] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 4.527482] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 4.528236] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 4.532162] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 4.555199] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 4.555210] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 4.555470] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.563123] mmc1: new high speed MMC card at address 0001 <6>[ 4.564214] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 4.564783] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB <6>[ 4.565259] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB <6>[ 4.565605] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (249:0) <6>[ 4.619712] mmcblk1: p1 <6>[ 4.633176] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.634858] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 4.726246] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 6.855395] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 6.884714] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 6.914824] Sending DHCP requests ., OK <6>[ 7.054704] IP-Config: Got DHCP answer from 172.16.3.3, my address is 172.16.3.146 <6>[ 7.054726] IP-Config: Complete: <6>[ 7.054730] device=eth0, hwaddr=34:03:de:5e:2c:05, ipaddr=172.16.3.146, mask=255.255.255.0, gw=172.16.3.3 <6>[ 7.054744] host=172.16.3.146, domain=denx.de, nis-domain=(none) <6>[ 7.054750] bootserver=172.16.3.33, rootserver=172.16.3.33, rootpath= <6>[ 7.054757] nameserver0=172.16.3.3 <6>[ 7.054767] ntpserver0=172.16.3.3 <6>[ 7.057519] Freeing unused kernel memory: 1024K <6>[ 7.125209] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.358926] udevd[101]: starting version 3.2.9 <5>[ 7.360382] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 7.360851] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 7.360986] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 7.397111] udevd[101]: specified user 'tss' unknown <27>[ 7.397329] udevd[101]: specified group 'tss' unknown <30>[ 7.407500] udevd[102]: starting eudev-3.2.9 <6>[ 8.083520] remoteproc remoteproc0: wkup_m3 is available <4>[ 8.268722] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 8.269036] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <4>[ 8.341044] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 8.341353] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 8.391847] usbcore: registered new interface driver usbfs <6>[ 8.391923] usbcore: registered new interface driver hub <6>[ 8.392009] usbcore: registered new device driver usb <6>[ 8.688927] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 8.688981] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 8.785200] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 8.785231] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.785241] usb usb1: Product: MUSB HDRC host driver <6>[ 8.785248] usb usb1: Manufacturer: Linux 5.10.209-cip44-rt18 musb-hcd <6>[ 8.785254] usb usb1: SerialNumber: musb-hdrc.1 <6>[ 8.805036] hub 1-0:1.0: USB hub found <6>[ 8.805151] hub 1-0:1.0: 1 port detected <6>[ 8.882339] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <4>[ 9.095086] at24 0-0050: supply vcc not found, using dummy regulator <6>[ 9.204571] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <4>[ 9.205114] at24 2-0054: supply vcc not found, using dummy regulator <4>[ 9.280359] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 9.307500] at24 2-0056: supply vcc not found, using dummy regulator <3>[ 9.310754] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <4>[ 9.337358] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 9.507073] omap_rtc 44e3e000.rtc: registered as rtc0 <6>[ 9.507147] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) <4>[ 9.528828] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <6>[ 9.589922] input: tps65217_pwrbutton as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <3>[ 9.650650] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 9.824848] tda998x 0-0070: found TDA19988 <3>[ 9.872015] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <3>[ 10.168217] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <3>[ 10.210375] davinci-mcasp 48038000.mcasp: IRQ common not found <3>[ 10.376969] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 10.382351] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <6>[ 10.405221] remoteproc remoteproc0: powering up wkup_m3 <4>[ 10.405365] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 10.405383] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 10.405390] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <6>[ 10.763263] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_driver_exit [tda998x]) <6>[ 10.796042] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 <6>[ 10.796429] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 10.806930] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 11.068995] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 11.070000] random: crng init done <3>[ 11.323137] PM: Cannot get wkup_m3_ipc handle <6>[ 11.537605] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 <6>[ 11.562843] omap-sham 53100000.sham: will run requests pump with realtime priority <6>[ 11.610103] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 <6>[ 11.651167] omap-aes 53500000.aes: will run requests pump with realtime priority <3>[ 11.674578] PM: Cannot get wkup_m3_ipc handle <3>[ 11.686749] PM: Cannot get wkup_m3_ipc handle <3>[ 12.220572] PM: Cannot get wkup_m3_ipc handle <3>[ 12.240212] PM: Cannot get wkup_m3_ipc handle done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1089068/environment . /lava-1089068/environment / # /lava-1089068/bin/lava-test-runner /lava-1089068/0 /lava-1089068/bin/lava-test-runner /lava-1089068/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1089068/0/tests/0_dmesg + cat uuid + UUID=1089068_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 13.187615] <8>[ 13.252055] <8>[ 13.312125] + set +x <8>[ 13.372242] <8>[ 13.374305] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1089068/environment / # . /lava-1089068/environment/lava-1089068/bin/lava-test-runner /lava-1089068/1 / # /lava-1089068/bin/lava-test-runner /lava-1089068/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1089068/1/tests/1_bootrr + cat uuid + UUID=1089068_1.5.2.4.5 + <8>[ 13.924542] set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1089068/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto pm33xx /lava-1089068/1/../bin/lava-test-case <8>[ 15.032430] /lava-1089068/1/../bin/lava-test-case <8>[ 15.087432] /lava-1089068/1/../bin/lava-test-case <8>[ 15.120317] /lava-1089068/1/../bin/lava-test-case <8>[ 15.181771] /lava-1089068/1/../bin/lava-test-case <8>[ 15.232449] /lava-1089068/1/../bin/lava-test-case <8>[ 15.273437] /lava-1089068/1/../bin/lava-test-case <8>[ 15.324414] /lava-1089068/1/../bin/lava-test-case <8>[ 15.390769] /lava-1089068/1/../bin/lava-test-case <8>[ 15.431278] /lava-1089068/1/../bin/lava-test-case <8>[ 15.481748] /lava-1089068/1/../bin/lava-test-case <8>[ 15.522434] /lava-1089068/1/../bin/lava-test-case <8>[ 15.572777] /lava-1089068/1/../bin/lava-test-case <8>[ 15.612981] /lava-1089068/1/../bin/lava-test-case <8>[ 15.653510] /lava-1089068/1/../bin/lava-test-case <8>[ 15.694513] /lava-1089068/1/../bin/lava-test-case <8>[ 15.744390] /lava-1089068/1/../bin/lava-test-case <8>[ 15.786561] /lava-1089068/1/../bin/lava-test-case <8>[ 15.837254] /lava-1089068/1/../bin/lava-test-case <8>[ 15.887032] /lava-1089068/1/../bin/lava-test-case <8>[ 15.927722] /lava-1089068/1/../bin/lava-test-case <8>[ 15.978438] /lava-1089068/1/../bin/lava-test-case <8>[ 16.029171] /lava-1089068/1/../bin/lava-test-case <8>[ 16.070530] /lava-1089068/1/../bin/lava-test-case <8>[ 16.121522] /lava-1089068/1/../bin/lava-test-case <8>[ 16.163016] /lava-1089068/1/../bin/lava-test-case <8>[ 16.213310] /lava-1089068/1/../bin/lava-test-case <8>[ 16.253946] /lava-1089068/1/../bin/lava-test-case <8>[ 17.333341] /lava-1089068/1/../bin/lava-test-case <8>[ 17.375098] /lava-1089068/1/../bin/lava-test-case <8>[ 17.425621] /lava-1089068/1/../bin/lava-test-case <8>[ 17.467293] /lava-1089068/1/../bin/lava-test-case <8>[ 17.517764] /lava-1089068/1/../bin/lava-test-case <8>[ 17.558381] /lava-1089068/1/../bin/lava-test-case <8>[ 17.609162] /lava-1089068/1/../bin/lava-test-case <8>[ 17.649588] /lava-1089068/1/../bin/lava-test-case <8>[ 17.700616] /lava-1089068/1/../bin/lava-test-case <8>[ 17.741022] /lava-1089068/1/../bin/lava-test-case <8>[ 17.791919] /lava-1089068/1/../bin/lava-test-case <8>[ 17.832597] /lava-1089068/1/../bin/lava-test-case <8>[ 17.883171] /lava-1089068/1/../bin/lava-test-case <8>[ 17.923383] /lava-1089068/1/../bin/lava-test-case <8>[ 17.974189] /lava-1089068/1/../bin/lava-test-case <8>[ 18.015462] /lava-1089068/1/../bin/lava-test-case <8>[ 18.065926] /lava-1089068/1/../bin/lava-test-case <8>[ 18.106840] /lava-1089068/1/../bin/lava-test-case <8>[ 18.157385] /lava-1089068/1/../bin/lava-test-case <8>[ 18.198231] /lava-1089068/1/../bin/lava-test-case <8>[ 18.248984] /lava-1089068/1/../bin/lava-test-case /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: <8>[ 18.289464] line 84: assert_device-present: not found /lava-1089068/1/../bin/lava-test-case <8>[ 18.333406] /lava-1089068/1/../bin/lava-test-case <8>[ 18.384318] /lava-1089068/1/../bin/lava-test-case <8>[ 18.432574] + set +x