[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.101.215 (445 ms) U-Boot> setenv serverip 192.168.101.1 setenv serverip 192.168.101.1 U-Boot> tftp 0x01000000 8392530/tftp-deploy-upiklkod/kernel/zImage tftp 0x01000000 8392530/tftp-deploy-upiklkod/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.215 Filename '8392530/tftp-deploy-upiklkod/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##### 532.2 KiB/s done Bytes transferred = 5792800 (586420 hex) U-Boot> tftp 0x02200000 8392530/tftp-deploy-upiklkod/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 8392530/tftp-deploy-upiklkod/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.215 Filename '8392530/tftp-deploy-upiklkod/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 1002.9 KiB/s done Bytes transferred = 9242780 (8d089c hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 8392530/tftp-deploy-upiklkod/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 8392530/tftp-deploy-upiklkod/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.101.1; our IP address is 192.168.101.215 Filename '8392530/tftp-deploy-upiklkod/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 835 KiB/s done Bytes transferred = 13687 (3577 hex) U-Boot> setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x586420 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9242716 Bytes = 8.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006676 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.158-cip22 (KernelCI@build-j718759-arm-gcc-10-bcm2835-defconfig-zgh4l) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Fri Dec 16 19:38:18 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:148 arm_dt_init_cpu_maps+0x1b8/0x200 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.158-cip22 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] Backtrace: [ 0.000000] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 0.000000] r7:c0e01edc r6:00000000 r5:00000009 r4:c0bbc910 [ 0.000000] [] (show_stack) from [] (dump_stack+0x28/0x30) [ 0.000000] [] (dump_stack) from [] (__warn+0xcc/0xf8) [ 0.000000] r5:00000009 r4:c0b33908 [ 0.000000] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) [ 0.000000] r9:c0f75428 r8:c0b33981 r7:00000009 r6:c0d04d08 r5:00000094 r4:c0b33908 [ 0.000000] [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x1b8/0x200) [ 0.000000] r8:c0b338b5 r7:00000000 r6:ff000000 r5:00000000 r4:eb9d96c4 [ 0.000000] [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x26c/0x644) [ 0.000000] r10:c0e01f70 r9:c0e01f68 r8:ebffff00 r7:c0bca0c8 r6:2fffffff r5:c0e08730 [ 0.000000] r4:c0d33ee8 [ 0.000000] [] (setup_arch) from [] (start_kernel+0x64/0x520) [ 0.000000] r10:10c53c7d r9:410fc075 r8:00000100 r7:c0f8f03c r6:c0e04240 r5:00000051 [ 0.000000] r4:c0d004b0 [ 0.000000] [] (start_kernel) from [<00000000>] (0x0) [ 0.000000] r9:410fc075 r8:00000100 r7:00000000 r6:10c03c7d r5:00000051 r4:c0d004b0 [ 0.000000] ---[ end trace 58996bc4bee07162 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689080K/786432K available (8192K kernel code, 1593K rwdata, 3244K rodata, 1024K init, 711K bss, 31816K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 32620 entries in 96 pages <6>[ 0.000000] ftrace: allocated 96 pages with 2 groups <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000020] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008817] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018636] bcm2835: system timer (irq = 27) <6>[ 0.023773] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030265] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041529] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049959] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056752] Console: colour dummy device 80x30 <6>[ 0.061620] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072461] pid_max: default: 32768 minimum: 301 <6>[ 0.077803] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.085554] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.094754] CPU: Testing write buffer coherency: ok <6>[ 0.101086] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.109317] devtmpfs: initialized <6>[ 0.118759] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.127156] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.137475] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.147912] pinctrl core: initialized pinctrl subsystem <6>[ 0.155503] NET: Registered protocol family 16 <6>[ 0.162400] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.172934] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.173392] No ATAGs? <6>[ 0.182423] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.190848] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.197392] Serial: AMBA PL011 UART driver <6>[ 0.222311] Kprobes globally optimized <5>[ 0.231633] SCSI subsystem initialized <6>[ 0.236026] usbcore: registered new interface driver usbfs <6>[ 0.242031] usbcore: registered new interface driver hub <6>[ 0.247767] usbcore: registered new device driver usb <4>[ 0.253452] usb_phy_generic phy: supply vcc not found, using dummy regulator <4>[ 0.261089] usb_phy_generic phy: dummy supplies not allowed for exclusive requests <6>[ 0.269342] mc: Linux media interface: v0.10 <6>[ 0.274006] videodev: Linux video capture interface: v2.00 <6>[ 0.280139] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.287357] Bluetooth: Core ver 2.22 <6>[ 0.291368] NET: Registered protocol family 31 <6>[ 0.296166] Bluetooth: HCI device and connection manager initialized <6>[ 0.302932] Bluetooth: HCI socket layer initialized <6>[ 0.308170] Bluetooth: L2CAP socket layer initialized <6>[ 0.313612] Bluetooth: SCO socket layer initialized <6>[ 0.319389] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.567861] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes, mapped to 0x(ptrval) <6>[ 0.578859] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 0.592254] Console: switching to colour frame buffer device 82x26 <6>[ 0.601842] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 0.619327] NET: Registered protocol family 2 <6>[ 0.624606] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.633992] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.642876] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.651132] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.658760] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.665750] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.672711] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.680284] NET: Registered protocol family 1 <6>[ 0.685746] RPC: Registered named UNIX socket transport module. <6>[ 0.692094] RPC: Registered udp transport module. <6>[ 0.697152] RPC: Registered tcp transport module. <6>[ 0.702219] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.710985] Unpacking initramfs... <6>[ 1.504494] Freeing initrd memory: 9028K <6>[ 1.509976] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 1.520065] Initialise system trusted keyrings <6>[ 1.525253] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.542476] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <5>[ 1.667697] Key type asymmetric registered <5>[ 1.672334] Asymmetric key parser 'x509' registered <6>[ 1.677655] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) <6>[ 1.685487] io scheduler mq-deadline registered <6>[ 1.690380] io scheduler kyber registered <6>[ 1.703044] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.715166] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.726398] usbcore: registered new interface driver zd1211rw <6>[ 1.732691] usbcore: registered new interface driver lan78xx <6>[ 1.738785] usbcore: registered new interface driver asix <6>[ 1.744633] usbcore: registered new interface driver ax88179_178a <6>[ 1.751174] usbcore: registered new interface driver cdc_ether <6>[ 1.757454] usbcore: registered new interface driver smsc95xx <6>[ 1.763636] usbcore: registered new interface driver net1080 <6>[ 1.769732] usbcore: registered new interface driver cdc_subset <6>[ 1.776074] usbcore: registered new interface driver zaurus <6>[ 1.782164] usbcore: registered new interface driver cdc_ncm <6>[ 1.788828] usbcore: registered new interface driver usb-storage <6>[ 1.795432] i2c /dev entries driver <4>[ 1.801779] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.811417] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.818569] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.825168] sdhci: Copyright(c) Pierre Ossman <6>[ 1.830168] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.837007] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.844518] usbcore: registered new interface driver usbhid <6>[ 1.850502] usbhid: USB HID core driver <6>[ 1.854827] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.862795] NET: Registered protocol family 10 <6>[ 1.868956] Segment Routing with IPv6 <6>[ 1.873148] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.880362] NET: Registered protocol family 17 <6>[ 1.885697] oprofile: using timer interrupt. <5>[ 1.890730] Loading compiled-in X.509 certificates <6>[ 1.902330] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.911843] printk: console [ttyAMA0] enabled <6>[ 1.911843] printk: console [ttyAMA0] enabled <6>[ 1.921183] printk: bootconsole [pl11] disabled <6>[ 1.921183] printk: bootconsole [pl11] disabled <6>[ 1.934873] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <4>[ 1.946269] ------------[ cut here ]------------ <4>[ 1.951237] WARNING: CPU: 0 PID: 46 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xf8/0x2f0 <4>[ 1.960462] Modules linked in: <4>[ 1.963789] CPU: 0 PID: 46 Comm: kworker/0:3 Tainted: G W 5.10.158-cip22 #1 <4>[ 1.972310] Hardware name: BCM2835 <4>[ 1.975985] Workqueue: events deferred_probe_work_func <4>[ 1.981390] Backtrace: <4>[ 1.984115] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 1.991949] r7:00000000 r6:00000000 r5:00000009 r4:c0bbc910 <4>[ 1.997873] [] (show_stack) from [] (dump_stack+0x28/0x30) <4>[ 2.005373] [] (dump_stack) from [] (__warn+0xcc/0xf8) <4>[ 2.012509] r5:00000009 r4:c0ba54a7 <4>[ 2.016349] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) <4>[ 2.024098] r9:c46e4bc8 r8:00000000 r7:00000009 r6:c062a104 r5:0000004f r4:c0ba54a7 <4>[ 2.032109] [] (warn_slowpath_fmt) from [] (dt_cpufreq_probe+0xf8/0x2f0) <4>[ 2.040809] r8:00000000 r7:c46e5a10 r6:c46e4bc0 r5:c0e08860 r4:00000000 <4>[ 2.047772] [] (dt_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.056490] r10:00000003 r9:c1031784 r8:00000000 r7:c103177c r6:c0f35884 r5:c46e5a10 <4>[ 2.064582] r4:00000000 <4>[ 2.067384] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.075909] r7:c103177c r6:c0f35884 r5:00000000 r4:c46e5a10 <4>[ 2.081840] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.090455] r10:00000003 r9:00000000 r8:c0f24fa8 r7:c46e5a10 r6:c46c97fc r5:c0f35884 <4>[ 2.098530] r4:c46e5a10 <4>[ 2.101341] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.110652] r9:00000000 r8:c0f24fa8 r7:c46e5a10 r6:c46c97fc r5:c0f35884 r4:00000001 <4>[ 2.118653] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.127698] r7:c46e5a54 r6:c0519840 r5:c46c97fc r4:00000000 <4>[ 2.133628] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.142151] r6:c46e5a10 r5:00000001 r4:c46e5a10 <4>[ 2.147030] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.155815] r7:00000000 r6:c46e5a10 r5:c0f24f50 r4:c46e5a10 <4>[ 2.161760] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.170642] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.178810] r7:00000000 r6:c0f24c48 r5:00000000 r4:c46e5a10 <4>[ 2.184741] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.193183] r9:c0e0b378 r8:c0e0b358 r7:05f5e100 r6:00000000 r5:00000000 r4:c46e5a00 <4>[ 2.201195] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.211197] r9:05f5e0ff r8:2faf0800 r7:05f5e100 r6:c46c98e0 r5:00000000 r4:c46e5a00 <4>[ 2.219198] [] (platform_device_register_full) from [] (raspberrypi_cpufreq_probe+0x10c/0x198) <4>[ 2.229804] r7:05f5e100 r6:c0e08860 r5:00000000 r4:00000000 <4>[ 2.235724] [] (raspberrypi_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.245210] r9:c1031784 r8:00000000 r7:c103177c r6:c0f3597c r5:c46e5610 r4:00000000 <4>[ 2.253222] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.261750] r7:c103177c r6:c0f3597c r5:00000000 r4:c46e5610 <4>[ 2.267670] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.276285] r10:c46e43c0 r9:00000000 r8:c46e5410 r7:c46e5610 r6:c46c9a2c r5:c0f3597c <4>[ 2.284376] r4:c46e5610 <4>[ 2.287175] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.296492] r9:00000000 r8:c46e5410 r7:c46e5610 r6:c46c9a2c r5:c0f3597c r4:00000001 <4>[ 2.304503] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.313549] r7:c46e5654 r6:c0519840 r5:c46c9a2c r4:00000000 <4>[ 2.319479] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.327991] r6:c46e5610 r5:00000001 r4:c46e5610 <4>[ 2.332880] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.341666] r7:00000000 r6:c46e5610 r5:c0f24f50 r4:c46e5610 <4>[ 2.347584] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.356461] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.364639] r7:00000000 r6:c0f24c48 r5:00000000 r4:c46e5610 <4>[ 2.370569] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.379000] r9:c0e0b378 r8:c0e0b358 r7:00000000 r6:00000000 r5:00000000 r4:c46e5600 <4>[ 2.387013] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.397019] r9:c46e5410 r8:c46df150 r7:00000000 r6:c46c9b18 r5:00000000 r4:c46e5600 <4>[ 2.405035] [] (platform_device_register_full) from [] (raspberrypi_clk_probe+0x160/0x31c) <4>[ 2.415293] r7:00000000 r6:00000000 r5:c46e4340 r4:00000000 <4>[ 2.421224] [] (raspberrypi_clk_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.430359] r10:00000003 r9:c1031784 r8:00000000 r7:c103177c r6:c0f1f0e8 r5:c46e5410 <4>[ 2.438435] r4:00000000 <4>[ 2.441244] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.449769] r7:c103177c r6:c0f1f0e8 r5:00000000 r4:c46e5410 <4>[ 2.455688] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.464304] r10:00000003 r9:00000000 r8:c1594c10 r7:c46e5410 r6:c46c9c6c r5:c0f1f0e8 <4>[ 2.472394] r4:c46e5410 <4>[ 2.475194] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.484502] r9:00000000 r8:c1594c10 r7:c46e5410 r6:c46c9c6c r5:c0f1f0e8 r4:00000001 <4>[ 2.492512] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.501562] r7:c46e5454 r6:c0519840 r5:c46c9c6c r4:00000000 <4>[ 2.507481] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.516005] r6:c46e5410 r5:00000001 r4:c46e5410 <4>[ 2.520896] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.529681] r7:00000000 r6:c46e5410 r5:c0f24f50 r4:c46e5410 <4>[ 2.535600] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.544476] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.552655] r7:00000000 r6:c0f24c48 r5:00000000 r4:c46e5410 <4>[ 2.558574] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.567016] r9:c0e0b378 r8:c0e0b358 r7:c1594c00 r6:00000000 r5:00000000 r4:c46e5400 <4>[ 2.575029] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.585030] r9:c1031784 r8:00000001 r7:c1594c00 r6:c46c9d58 r5:00000000 r4:c46e5400 <4>[ 2.593043] [] (platform_device_register_full) from [] (rpi_firmware_probe+0x19c/0x1e4) <4>[ 2.603041] r7:c1594c00 r6:c1594c10 r5:c46e32c0 r4:00000000 <4>[ 2.608960] [] (rpi_firmware_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.617838] r8:00000000 r7:c103177c r6:c0f3729c r5:c1594c10 r4:00000000 <4>[ 2.624810] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.633336] r7:c103177c r6:c0f3729c r5:00000000 r4:c1594c10 <4>[ 2.639255] [] (really_probe) from [] (driver_probe_device+0x19c/0x1c8) <4>[ 2.647869] r10:c0f24ea4 r9:00000000 r8:00000000 r7:c1594c10 r6:c46c9ea4 r5:c0f3729c <4>[ 2.655955] r4:c1594c10 <4>[ 2.658754] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.668062] r9:00000000 r8:00000000 r7:c1594c10 r6:c46c9ea4 r5:c0f3729c r4:00000001 <4>[ 2.676072] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.685121] r7:c1594c54 r6:c0519840 r5:c46c9ea4 r4:00000000 <4>[ 2.691052] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.699575] r6:c1594c10 r5:00000001 r4:c1594c10 <4>[ 2.704454] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.713239] r7:eb9c7300 r6:c1594c10 r5:c0f24f50 r4:c1594c10 <4>[ 2.719158] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.728040] [] (bus_probe_device) from [] (deferred_probe_work_func+0xa8/0xcc) <4>[ 2.737259] r7:eb9c7300 r6:c0f24ec8 r5:c0f24e8c r4:c1594c10 <4>[ 2.743191] [] (deferred_probe_work_func) from [] (process_one_work+0x194/0x274) <4>[ 2.752583] r7:eb9c7300 r6:c0e0d0d0 r5:c0f24ea0 r4:c46aec80 <4>[ 2.758501] [] (process_one_work) from [] (worker_thread+0x220/0x2e4) <4>[ 2.766943] r10:c159f160 r9:c0f8fab0 r8:c0e0d0e4 r7:c0edca20 r6:c0e0d0d0 r5:c46aec94 <4>[ 2.775029] r4:c46aec80 <4>[ 2.777832] [] (worker_thread) from [] (kthread+0x11c/0x128) <4>[ 2.785494] r9:c1531e98 r8:c46aec80 r7:c013497c r6:c46c8000 r5:c159f100 r4:c159f140 <4>[ 2.793505] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 2.800987] Exception stack(0xc46c9fb0 to 0xc46c9ff8) <4>[ 2.806293] 9fa0: 00000000 00000000 00000000 00000000 <4>[ 2.814732] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.823175] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.830059] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0139428 <4>[ 2.838136] r4:c159f100 r3:00000001 <4>[ 2.841976] ---[ end trace 58996bc4bee07164 ]--- <6>[ 2.846885] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <4>[ 2.855899] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.863550] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.922197] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.927199] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.934742] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.941928] hub 1-0:1.0: USB hub found <6>[ 2.946083] hub 1-0:1.0: 1 port detected <4>[ 2.952025] vc4_hdmi 3f902000.hdmi: deferred probe timeout, ignoring dependency <4>[ 2.959708] vc4_hdmi: probe of 3f902000.hdmi failed with error -110 <4>[ 2.966450] vc4_vec 3f806000.vec: deferred probe timeout, ignoring dependency <4>[ 2.973930] vc4_vec: probe of 3f806000.vec failed with error -110 <4>[ 2.980631] vc4_v3d 3fc00000.v3d: deferred probe timeout, ignoring dependency <4>[ 2.988064] vc4_v3d: probe of 3fc00000.v3d failed with error -110 <4>[ 2.995392] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <4>[ 3.027489] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 3.038078] mmc0: new high speed SDHC card at address 0002 <6>[ 3.044935] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 3.052461] mmcblk0: p1 <6>[ 3.329417] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.580468] hub 1-1:1.0: USB hub found <6>[ 3.584582] hub 1-1:1.0: 5 ports detected <6>[ 3.909406] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 4.042683] smsc95xx v2.0.0 <6>[ 4.182978] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) <6>[ 4.195530] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 4.299415] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.435822] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.443412] scsi host0: usb-storage 1-1.3:1.0 <6>[ 5.123640] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 5.140956] smsc95xx 1-1.1:1.0 eth0: Link is Down <5>[ 5.539048] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <5>[ 5.889431] random: crng init done <5>[ 6.479977] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 6.488199] sd 0:0:0:0: [sda] Write Protect is off <3>[ 6.493698] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 6.499280] sd 0:0:0:0: [sda] Assuming drive cache: write through <6>[ 6.538388] sda: sda1 sda2 <5>[ 6.545221] sd 0:0:0:0: [sda] Attached SCSI removable disk <6>[ 7.221108] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.229549] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.259583] Sending DHCP requests ., OK <6>[ 7.443535] IP-Config: Got DHCP answer from 192.168.101.1, my address is 192.168.101.215 <6>[ 7.451918] IP-Config: Complete: <6>[ 7.455427] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.101.215, mask=255.255.255.0, gw=192.168.101.1 <6>[ 7.466235] host=192.168.101.215, domain=lava.cbg.collabora.co.uk, nis-domain=(none) <6>[ 7.474712] bootserver=192.168.101.1, rootserver=192.168.101.1, rootpath= <6>[ 7.474718] nameserver0=192.168.101.1 <5>[ 7.486938] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 7.516852] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 7.524135] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 7.533346] ALSA device list: <6>[ 7.536587] No soundcards found. <6>[ 7.540316] cfg80211: failed to load regulatory.db <6>[ 7.545810] uart-pl011 3f201000.serial: no DMA platform data <6>[ 7.558555] Freeing unused kernel memory: 1024K <6>[ 7.563730] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.794174] udevd[93]: starting version 3.2.9 <27>[ 7.813283] udevd[93]: specified user 'tss' unknown <27>[ 7.818772] udevd[93]: specified group 'tss' unknown <30>[ 7.830114] udevd[94]: starting eudev-3.2.9 <4>[ 8.176218] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 8.267288] bcm2835-rng 3f104000.rng: hwrng registered <3>[ 8.288069] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 8.294898] vchiq: could not load vchiq done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-8392530/environment . /lava-8392530/environment / # /lava-8392530/bin/lava-test-runner /lava-8392530/0 /lava-8392530/bin/lava-test-runner /lava-8392530/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-8392530/0/tests/0_dmesg + cat uuid + UUID=8392530_1.5.2<8>[ 9.625587] .4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 9.691331] <8>[ 9.751646] <8>[ 9.812201] + set +x <8>[ 9.823349] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-8392530/environment / # . /lava-8392530/environment/lava-8392530/bin/lava-test-runner /lava-8392530/1 / # /lava-8392530/bin/lava-test-runner /lava-8392530/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-8392530/1/tests/1_bootrr + cat uuid + UUID=8392530_1.5.2.4.<8>[ 10.350227] 5 + set +x + export 'PATH=/opt/bootrr/helpers:/lava-8392530/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-8392530/1/../bin/lava-test-case <8>[ 11.411167] /lava-8392530/1/../bin/lava-test-case <8>[ 11.465244] /lava-8392530/1/../bin/lava-test-case <8>[ 11.498105] + set +x <8>[ 11.523771] / #