Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2019.04-00002-gf15b99f0b6 (Oct 01 2019 - 09:28:05 -0500) Trying to boot from MMC2 Loading Environment from EXT4... Card did not respond to voltage select! U-Boot 2019.04-00002-gf15b99f0b6 (Oct 01 2019 - 09:28:05 -0500), Build: jenkins-github_Bootloader-Builder-131 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. RTC 32KCLK Source: External. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... Card did not respond to voltage select! Board: BeagleBone Black not set. Validating first E-fuse MAC BeagleBone Black: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.11.4 (4 ms) => setenv serverip 192.168.11.5 setenv serverip 192.168.11.5 => tftp 0x82000000 1053528/tftp-deploy-h8t1u0v3/kernel/zImage tftp 0x82000000 1053528/tftp-deploy-h8t1u0v3/kernel/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.4 Filename '1053528/tftp-deploy-h8t1u0v3/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 5.3 MiB/s done Bytes transferred = 4608064 (465040 hex) => tftp 0x83000000 1053528/tftp-deploy-h8t1u0v3/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1053528/tftp-deploy-h8t1u0v3/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.4 Filename '1053528/tftp-deploy-h8t1u0v3/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################## 5.2 MiB/s done Bytes transferred = 10931296 (a6cc60 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1053528/tftp-deploy-h8t1u0v3/dtb/am335x-boneblack.dtb tftp 0x88000000 1053528/tftp-deploy-h8t1u0v3/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.11.5; our IP address is 192.168.11.4 Filename '1053528/tftp-deploy-h8t1u0v3/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *##### 5 MiB/s done Bytes transferred = 62828 (f56c hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.11.5:/var/lib/lava/dispatcher/tmp/1053528/extract-nfsrootfs-0xe06xfm,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.11.5:/var/lib/lava/dispatcher/tmp/1053528/extract-nfsrootfs-0xe06xfm,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-12-07 20:04:31 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 10931232 Bytes = 10.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801256b Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.201-cip41 (KernelCI@build-j37938-arm-gcc-10-omap2plus-defconfig-scpft) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Dec 7 19:43:16 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 20 pages/cpu s49740 r8192 d23988 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/nfs rw nfsroot=192.168.11.5:/var/lib/lava/dispatcher/tmp/1053528/extract-nfsrootfs-0xe06xfm,tcp,hard console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 475192K/522240K available (9216K kernel code, 1027K rwdata, 2180K rodata, 1024K init, 278K bss, 30664K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000011] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008343] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018562] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030206] Console: colour dummy device 80x30 <3>[ 0.035080] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042136] This ensures that you still see kernel messages. Please <3>[ 0.048863] update your kernel commandline. <6>[ 0.053467] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095542] CPU: Testing write buffer coherency: ok <6>[ 0.100925] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106390] pid_max: default: 32768 minimum: 301 <6>[ 0.111552] LSM: Security Framework initializing <6>[ 0.116651] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.124466] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.134124] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.140646] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.147842] rcu: Hierarchical SRCU implementation. <6>[ 0.153628] smp: Bringing up secondary CPUs ... <6>[ 0.158564] smp: Brought up 1 node, 1 CPU <6>[ 0.162990] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.169720] CPU: All CPU(s) started in SVC mode. <6>[ 0.175452] devtmpfs: initialized <6>[ 0.191278] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.199816] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.210252] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.218905] pinctrl core: initialized pinctrl subsystem <6>[ 0.226477] NET: Registered protocol family 16 <6>[ 0.234174] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.260635] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.266732] audit: initializing netlink subsys (disabled) <6>[ 0.273812] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.273826] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.280438] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.287159] cpuidle: using governor menu <5>[ 1.166073] audit: type=2000 audit(0.230:1): state=initialized audit_enabled=0 res=1 <6>[ 1.291212] No ATAGs? <6>[ 1.293837] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.318235] Kprobes globally optimized <6>[ 1.331525] iommu: Default domain type: Translated <6>[ 1.338552] vgaarb: loaded <5>[ 1.342264] SCSI subsystem initialized <6>[ 1.347560] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.353044] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.362766] PTP clock support registered <6>[ 1.368344] clocksource: Switched to clocksource dmtimer <5>[ 2.006079] VFS: Disk quotas dquot_6.6.0 <6>[ 2.010579] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 2.027469] NET: Registered protocol family 2 <6>[ 2.032645] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.041318] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.050278] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.058574] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.066234] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.073174] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.080207] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.087819] NET: Registered protocol family 1 <6>[ 2.093611] RPC: Registered named UNIX socket transport module. <6>[ 2.100071] RPC: Registered udp transport module. <6>[ 2.105179] RPC: Registered tcp transport module. <6>[ 2.110305] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.117213] PCI: CLS 0 bytes, default 64 <6>[ 2.122263] Trying to unpack rootfs image as initramfs... <6>[ 2.839531] Freeing initrd memory: 10676K <6>[ 2.845148] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 2.855544] Initialise system trusted keyrings <6>[ 2.861004] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 2.869346] NFS: Registering the id_resolver key type <5>[ 2.874880] Key type id_resolver registered <5>[ 2.879530] Key type id_legacy registered <6>[ 2.883981] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 2.891989] Key type asymmetric registered <5>[ 2.896479] Asymmetric key parser 'x509' registered <6>[ 2.901826] io scheduler mq-deadline registered <6>[ 2.906756] io scheduler kyber registered <3>[ 3.044940] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.053651] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.162526] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 3.204611] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 3.276468] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.285173] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 3.345024] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.353725] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 3.371294] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.379981] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 3.443545] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 3.452116] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 3.479255] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 3.493757] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <6>[ 3.504680] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 3.514103] printk: console [ttyS0] enabled <6>[ 3.514103] printk: console [ttyS0] enabled <6>[ 3.523169] printk: bootconsole [omap8250] disabled <6>[ 3.523169] printk: bootconsole [omap8250] disabled <6>[ 3.546929] brd: module loaded <6>[ 3.557655] loop: module loaded <3>[ 3.563279] mtdoops: mtd device (mtddev=name/number) must be supplied <6>[ 3.628314] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 3.657376] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 3.667310] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 3.674028] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 3.679834] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) <6>[ 3.687335] cpsw 4a100000.ethernet: Detected MACID = 64:cf:d9:3f:a0:d5 <6>[ 3.696375] i2c /dev entries driver <5>[ 3.702015] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 3.709945] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.716425] sdhci: Copyright(c) Pierre Ossman <6>[ 3.721844] sdhci-pltfm: SDHCI platform and OF driver helper <4>[ 3.730128] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 3.739961] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.748459] Initializing XFRM netlink socket <6>[ 3.753229] NET: Registered protocol family 10 <6>[ 3.759709] Segment Routing with IPv6 <6>[ 3.763759] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.770813] NET: Registered protocol family 17 <6>[ 3.775572] NET: Registered protocol family 15 <5>[ 3.780486] Key type dns_resolver registered <6>[ 3.785635] oprofile: using arm/armv7 <6>[ 3.789777] ThumbEE CPU extension supported. <5>[ 3.794355] Registering SWP/SWPB emulation handler <3>[ 3.799879] omap_voltage_late_init: Voltage driver support not added <3>[ 3.806542] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize <3>[ 3.814983] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize <6>[ 3.823671] SmartReflex Class3 initialized <6>[ 3.828525] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <5>[ 3.837380] Loading compiled-in X.509 certificates <6>[ 3.862539] OMAP GPIO hardware version 0.1 <4>[ 3.899003] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 3.912628] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 3.921442] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 3.927775] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 3.937815] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 3.949254] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 3.958348] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 3.963509] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 3.973909] mmc1: new high speed MMC card at address 0001 <6>[ 3.980848] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 3.986099] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB <6>[ 3.992803] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB <6>[ 4.000334] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (249:0) <6>[ 4.010700] mmcblk1: p1 <6>[ 4.034468] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.044120] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 4.130052] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 7.248992] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.268333] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.298437] Sending DHCP requests ., OK <6>[ 7.342425] IP-Config: Got DHCP answer from 192.168.11.1, my address is 192.168.11.4 <6>[ 7.350499] IP-Config: Complete: <6>[ 7.354009] device=eth0, hwaddr=64:cf:d9:3f:a0:d5, ipaddr=192.168.11.4, mask=255.255.255.0, gw=192.168.11.1 <6>[ 7.364508] host=192.168.11.4, domain=usen.ad.jp, nis-domain=(none) <6>[ 7.371538] bootserver=0.0.0.0, rootserver=192.168.11.5, rootpath= <6>[ 7.371547] nameserver0=192.168.11.1 <6>[ 7.385443] Freeing unused kernel memory: 1024K <6>[ 7.408786] Run /init as init process Loading, please wait... Starting systemd-udevd version 252.12-1~deb12u1 <6>[ 8.507407] remoteproc remoteproc0: wkup_m3 is available <6>[ 8.697811] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <4>[ 8.746380] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 8.755657] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <4>[ 8.792186] at24 0-0050: supply vcc not found, using dummy regulator <4>[ 8.864841] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <6>[ 8.929061] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <4>[ 8.936707] at24 2-0054: supply vcc not found, using dummy regulator <3>[ 8.957695] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 8.999303] omap_rtc 44e3e000.rtc: registered as rtc0 <6>[ 9.004724] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) <6>[ 9.015807] usbcore: registered new interface driver usbfs <6>[ 9.021819] usbcore: registered new interface driver hub <6>[ 9.027502] usbcore: registered new device driver usb <4>[ 9.045612] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 9.054790] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 9.064802] input: tps65217_pwrbutton as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <3>[ 9.145448] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <4>[ 9.166482] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 9.209089] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 9.275291] at24 2-0057: supply vcc not found, using dummy regulator <3>[ 9.318124] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 9.383419] tda998x 0-0070: found TDA19988 <3>[ 9.506782] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 9.519566] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 9.525211] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 9.559349] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <3>[ 9.653489] davinci-mcasp 48038000.mcasp: IRQ common not found <6>[ 9.793635] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 9.802357] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 9.809913] usb usb1: Product: MUSB HDRC host driver <6>[ 9.815163] usb usb1: Manufacturer: Linux 5.10.201-cip41 musb-hcd <6>[ 9.821566] usb usb1: SerialNumber: musb-hdrc.1 <6>[ 9.874265] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 9.881535] random: crng init done <6>[ 9.894264] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_driver_exit [tda998x]) <6>[ 9.951086] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 <6>[ 10.079088] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <3>[ 10.096385] PM: Cannot get wkup_m3_ipc handle <6>[ 10.168613] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 <6>[ 10.181869] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 <6>[ 10.202977] hub 1-0:1.0: USB hub found <6>[ 10.240746] omap-aes 53500000.aes: will run requests pump with realtime priority <6>[ 10.254011] hub 1-0:1.0: 1 port detected <6>[ 10.290460] omap-sham 53100000.sham: will run requests pump with realtime priority <6>[ 10.301675] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <3>[ 10.313818] PM: Cannot get wkup_m3_ipc handle <6>[ 10.318736] remoteproc remoteproc0: powering up wkup_m3 <4>[ 10.324420] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 10.334297] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 10.340543] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <3>[ 10.376095] PM: Cannot get wkup_m3_ipc handle <3>[ 10.475744] PM: Cannot get wkup_m3_ipc handle <3>[ 10.916511] PM: Cannot get wkup_m3_ipc handle <3>[ 10.954840] PM: Cannot get wkup_m3_ipc handle Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/nfs-top ... done. Begin: Running /scripts/nfs-premount ... done. Begin: Waiting up to 180 secs for any network device to become available ... done. IP-Config: eth0 hardware address 64:cf:d9:3f:a0:d5 mtu 1500 DHCP IP-Config: eth0 guessed broadcast address 192.168.11.255 IP-Config: eth0 complete (dhcp from 192.168.11.1): address: 192.168.11.4 broadcast: 192.168.11.255 netmask: 255.255.255.0 gateway: 192.168.11.1 dns0 : 192.168.11.1 dns1 : 0.0.0.0 domain : usen.ad.jp rootserver: 192.168.11.1 rootpath: filename : done. Begin: Running /scripts/nfs-bottom ... done. Begin: Running /scripts/init-bottom ... mount: No such file or directory mount: invalid option -- done. mount: No such file or directory run-init: opening console: No such file or directory Target filesystem doesn't have requested /sbin/init. run-init: opening console: No such file or directory run-init: opening console: No such file or directory run-init: opening console: No such file or directory run-init: opening console: No such file or directory run-init: opening console: No such file or directory No init found. Try passing init= bootarg. (initramfs) <3>[ 64.528959] PM: Cannot get wkup_m3_ipc handle <6>[ 64.533856] platform pm33xx: deferred probe pending