connecting to NetworkSerialPort(target=Target(name='imx53-qsrb-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4010, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4010 connected to 10.8.254.5 (port 4010) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: Freescale i.MX53 Quick Start-R Board detected i.MX53 revision 2.1 mc13xxx-i2c mc347080: Found MC34708 ID: 0x014 mdio_bus: miibus0: probed eth0: got preset MAC address: 00:04:9f:02:71:b3 imx-usb 53f80200.usb@53f80200.of: USB EHCI 1.00 imx-esdhc 50004000.mmc@50004000.of: registered as mmc0 imx-esdhc 50020000.mmc@50020000.of: registered as mmc2 imx-ipuv3 18000000.ipu@18000000.of: IPUv3M probed netconsole: registered as netconsole-1 malloc space: 0xbfe7d3c0 -> 0xcfcfa77f (size 254.5 MiB) mmc0: detected SD card version 2.0 mmc0: registered mmc0 MCIMX53-START-R board 1.0 rev B envfs: no envfs (magic mismatch) - envfs never written? [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mFreescale i.MX53 Quick Start-R Board:/[0m bootm -v -r /mnt/tftp/968879/tftp-deploy-usyy8k5y/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/968879/tftp-deploy-usyy8k5y/dtb/imx53-qsrb.dtb /mnt/tftp/968879/tftp-deploy-usyy8k5y/kernel/zImage [1;32mbarebox@[1;36mFreescale i.MX53 Quick Start-R Board:/[0m bootm -v -r /mnt/tftp/968879/tftp-deploy-usyy8k5y/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/968879/tftp-deploy-usyy8k5y/dtb/imx53-qsrb.dtb /mnt/tftp/968879/tftp-deploy-usyy8k5y/kernel/zImage eth0: 100Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.196 Loading ARM Linux zImage '/mnt/tftp/968879/tftp-deploy-usyy8k5y/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x7377c000 no initrd load address, defaulting to 0x78000000 Loaded initrd GZIP compressed '/mnt/tftp/968879/tftp-deploy-usyy8k5y/ramdisk/ramdisk.cpio.gz' initrd is at 0x78000000-0x789fbe96 Loading devicetree from '/mnt/tftp/968879/tftp-deploy-usyy8k5y/dtb/imx53-qsrb.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x7377c000, initrd at 0x78000000, oftree at 0x789fc000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.31 (KernelCI@build-j1614945-arm-gcc-10-imx-v6-v7-defconfig-v46dx) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Jun 6 12:06:53 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Freescale i.MX53 Quick Start-R Board [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 64 MiB at 0xca000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000070000000-0x000000008fffffff] [ 0.000000] HighMem [mem 0x0000000090000000-0x00000000cfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000070000000-0x000000008fffffff] [ 0.000000] node 0: [mem 0x00000000b0000000-0x00000000cfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000070000000-0x00000000cfffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 17 pages/cpu s38388 r8192 d23052 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 261120 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 931496K/1048576K available (15360K kernel code, 2191K rwdata, 5092K rodata, 1024K init, 6673K bss, 51544K reserved, 65536K cma-reserved, 457624K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] TrustZone Interrupt Controller (TZIC) initialized [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU identified as i.MX53, silicon rev 2.1 [ 0.000000] Switching to timer-based delay loop, resolution 25ns [ 0.000002] sched_clock: 32 bits at 40MHz, resolution 25ns, wraps every 53687091187ns [ 0.000028] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 47781511156 ns [ 0.001827] Console: colour dummy device 80x30 [ 0.001908] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001923] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001935] ... MAX_LOCK_DEPTH: 48 [ 0.001946] ... MAX_LOCKDEP_KEYS: 8192 [ 0.001958] ... CLASSHASH_SIZE: 4096 [ 0.001968] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001981] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001991] ... CHAINHASH_SIZE: 32768 [ 0.002002] memory used by lock dependency info: 4061 kB [ 0.002014] memory used for stack traces: 2112 kB [ 0.002025] per task-struct memory footprint: 1536 bytes [ 0.002151] Calibrating delay loop (skipped), value calculated using timer frequency.. 80.00 BogoMIPS (lpj=400000) [ 0.002189] pid_max: default: 32768 minimum: 301 [ 0.002862] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.002898] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.007060] CPU: Testing write buffer coherency: ok [ 0.007244] CPU0: Spectre v2: using BPIALL workaround [ 0.008855] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.013121] cblist_init_generic: Setting adjustable number of callback queues. [ 0.013208] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.013698] Running RCU-tasks wait API self tests [ 0.014071] Setting up static identity map for 0x70100000 - 0x70100078 [ 0.014820] Callback from call_rcu_tasks_trace() invoked. [ 0.015133] rcu: Hierarchical SRCU implementation. [ 0.015148] rcu: Max phase no-delay instances is 1000. [ 0.017788] smp: Bringing up secondary CPUs ... [ 0.017815] smp: Brought up 1 node, 1 CPU [ 0.017831] SMP: Total of 1 processors activated (80.00 BogoMIPS). [ 0.017849] CPU: All CPU(s) started in SVC mode. [ 0.021312] devtmpfs: initialized [ 0.058606] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 [ 0.061576] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.061665] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.067922] pinctrl core: initialized pinctrl subsystem [ 0.075646] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.103176] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.121040] thermal_sys: Registered thermal governor 'step_wise' [ 0.121508] cpuidle: using governor menu [ 0.122882] No ATAGs? [ 0.122912] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.138694] platform 18000000.ipu: Fixed dependency cycle(s) with /soc/bus@60000000/tve@63ff0000 [ 0.158667] imx53-pinctrl 53fa8000.iomuxc: initialized IMX pinctrl driver [ 0.232211] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.326728] SCSI subsystem initialized [ 1.329413] usbcore: registered new interface driver usbfs [ 1.329768] usbcore: registered new interface driver hub [ 1.329951] usbcore: registered new device driver usb [ 1.330440] usb_phy_generic usbphy-0: supply vcc not found, using dummy regulator [ 1.331743] usb_phy_generic usbphy-0: dummy supplies not allowed for exclusive requests [ 1.332392] usb_phy_generic usbphy-1: supply vcc not found, using dummy regulator [ 1.333156] usb_phy_generic usbphy-1: dummy supplies not allowed for exclusive requests [ 1.338537] i2c i2c-1: IMX I2C adapter registered [ 1.369075] mc13xxx 0-0008: mc34708: rev 2.4, fin: 0, fab: 0 [ 1.444891] i2c i2c-0: IMX I2C adapter registered [ 1.446049] mc: Linux media interface: v0.10 [ 1.446444] videodev: Linux video capture interface: v2.00 [ 1.447269] pps_core: LinuxPPS API ver. 1 registered [ 1.447290] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.447368] PTP clock support registered [ 1.450129] Advanced Linux Sound Architecture Driver Initialized. [ 1.455621] Bluetooth: Core ver 2.22 [ 1.455826] NET: Registered PF_BLUETOOTH protocol family [ 1.455843] Bluetooth: HCI device and connection manager initialized [ 1.456006] Bluetooth: HCI socket layer initialized [ 1.456045] Bluetooth: L2CAP socket layer initialized [ 1.456221] Bluetooth: SCO socket layer initialized [ 1.459409] vgaarb: loaded [ 1.461968] clocksource: Switched to clocksource mxc_timer1 [ 1.474186] VFS: Disk quotas dquot_6.6.0 [ 1.474405] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.539925] NET: Registered PF_INET protocol family [ 1.540993] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.552372] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 10240 bytes, linear) [ 1.552476] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.552524] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 1.552723] TCP bind hash table entries: 4096 (order: 6, 327680 bytes, linear) [ 1.554058] TCP: Hash tables configured (established 4096 bind 4096) [ 1.554787] UDP hash table entries: 256 (order: 2, 24576 bytes, linear) [ 1.554939] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear) [ 1.555555] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.559124] RPC: Registered named UNIX socket transport module. [ 1.559189] RPC: Registered udp transport module. [ 1.559204] RPC: Registered tcp transport module. [ 1.559218] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.561334] PCI: CLS 0 bytes, default 64 [ 1.575223] Trying to unpack rootfs image as initramfs... [ 1.582573] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.589073] Initialise system trusted keyrings [ 1.602937] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 1.684995] NFS: Registering the id_resolver key type [ 1.685245] Key type id_resolver registered [ 1.685298] Key type id_legacy registered [ 1.685695] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.685816] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.686070] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.702524] fuse: init (API version 7.37) [ 1.952494] Key type asymmetric registered [ 1.952831] Asymmetric key parser 'x509' registered [ 1.953796] bounce: pool size: 64 pages [ 1.954372] io scheduler mq-deadline registered [ 1.954402] io scheduler kyber registered [ 2.028411] 53fbc000.serial: ttymxc0 at MMIO 0x53fbc000 (irq = 47, base_baud = 4166666) is a IMX [ 4.102257] printk: console [ttymxc0] enabled [ 4.138009] Stack Depot allocating hash table of 32768 entries with kvcalloc [ 4.164277] [drm] using 16m VRAM carveout [ 4.186033] msm msm: [drm:msm_drm_bind] VRAM: ca100000->cb100000 [ 4.223149] adreno 30000000.gpu: Could not find a clock rate. Using a reasonable default [ 4.243893] adreno 30000000.gpu: supply vdd not found, using dummy regulator [ 4.263127] adreno 30000000.gpu: supply vddcx not found, using dummy regulator [ 4.287155] msm msm: bound 30000000.gpu (ops a3xx_ops) [ 4.304961] [drm] Initialized msm 1.9.0 20130625 for msm on minor 0 [ 4.340637] seiko_panel panel: supply dvdd not found, using dummy regulator [ 4.363548] seiko_panel panel: supply avdd not found, using dummy regulator [ 4.406644] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 4.422884] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 4.431033] imx-drm display-subsystem: bound 63ff0000.tve (ops imx_tve_ops) [ 4.466950] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 4.584078] Console: switching to colour frame buffer device 128x48 [ 4.622494] imx-drm display-subsystem: [drm] fb0: imx-drmdrmfb frame buffer device [ 4.642547] imx-ipuv3 18000000.ipu: IPUv3M probed [ 4.694774] Freeing initrd memory: 10224K [ 4.737014] brd: module loaded [ 4.772080] loop: module loaded [ 4.777930] ahci-imx 10000000.sata: supply ahci not found, using dummy regulator [ 4.786511] ahci-imx 10000000.sata: supply phy not found, using dummy regulator [ 4.794398] ahci-imx 10000000.sata: supply target not found, using dummy regulator [ 4.803779] ahci-imx 10000000.sata: hwmon0: sensor 'sata_ahci' [ 4.812543] ahci-imx 10000000.sata: SSS flag set, parallel bus scan disabled [ 4.819664] ahci-imx 10000000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 4.828759] ahci-imx 10000000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc [ 4.845573] scsi host0: ahci-imx [ 4.851126] ata1: SATA max UDMA/133 mmio [mem 0x10000000-0x10000fff] port 0x100 irq 44 [ 4.874794] CAN device driver interface [ 4.946009] usbcore: registered new interface driver r8152 [ 4.951753] usbcore: registered new interface driver lan78xx [ 4.958069] usbcore: registered new interface driver asix [ 4.963927] usbcore: registered new interface driver ax88179_178a [ 4.970173] usbcore: registered new interface driver cdc_ether [ 4.976446] usbcore: registered new interface driver smsc95xx [ 4.982639] usbcore: registered new interface driver net1080 [ 4.988451] usbcore: registered new interface driver cdc_subset [ 4.994645] usbcore: registered new interface driver zaurus [ 5.000428] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 5.008166] usbcore: registered new interface driver cdc_ncm [ 5.014111] usbcore: registered new interface driver r8153_ecm [ 5.020303] usbcore: registered new interface driver usb-storage [ 5.035501] SPI driver ads7846 has no spi_device_id for ti,tsc2046 [ 5.041743] SPI driver ads7846 has no spi_device_id for ti,ads7843 [ 5.048190] SPI driver ads7846 has no spi_device_id for ti,ads7845 [ 5.054475] SPI driver ads7846 has no spi_device_id for ti,ads7873 [ 5.065590] input: mma8450 as /devices/platform/soc/60000000.bus/63fc8000.i2c/i2c-0/0-001c/input/input0 [ 5.086609] mxc_rtc_v2 53fa4000.rtc: registered as rtc0 [ 5.092655] mxc_rtc_v2 53fa4000.rtc: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 5.103218] i2c_dev: i2c /dev entries driver [ 5.123622] Bluetooth: HCI UART driver ver 2.3 [ 5.128133] Bluetooth: HCI UART protocol H4 registered [ 5.133895] Bluetooth: HCI UART protocol LL registered [ 5.148819] sdhci: Secure Digital Host Controller Interface driver [ 5.155380] sdhci: Copyright(c) Pierre Ossman [ 5.159770] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.169339] sdhci-esdhc-imx 50004000.mmc: Got CD GPIO [ 5.181484] sdhci-esdhc-imx 50020000.mmc: Got CD GPIO [ 5.192965] ata1: SATA link down (SStatus 0 SControl 300) [ 5.198949] ahci-imx 10000000.sata: no device found, disabling link. [ 5.205523] ahci-imx 10000000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 5.214784] sdhci-esdhc-imx 50020000.mmc: Got WP GPIO [ 5.240576] sahara 63ff8000.crypto: SAHARA version 4 initialized [ 5.249091] usbcore: registered new interface driver usbhid [ 5.254964] usbhid: USB HID core driver [ 5.266550] mmc0: SDHCI controller on 50004000.mmc [50004000.mmc] using ADMA [ 5.276756] mmc2: SDHCI controller on 50020000.mmc [50020000.mmc] using ADMA [ 5.285183] imx-ipuv3-csi imx-ipuv3-csi.0: Registered ipu1_csi0 capture as /dev/video0 [ 5.297380] imx-ipuv3 18000000.ipu: Registered ipu1_ic_prpenc capture as /dev/video1 [ 5.308094] imx-ipuv3 18000000.ipu: Registered ipu1_ic_prpvf capture as /dev/video2 [ 5.318692] imx-ipuv3-csi imx-ipuv3-csi.1: Registered ipu1_csi1 capture as /dev/video3 [ 5.334776] imx-media: Registered ipu_ic_pp csc/scaler as /dev/video4 [ 5.352837] mmc0: host does not support reading read-only switch, assuming write-enable [ 5.370009] mmc0: new high speed SDHC card at address 0001 [ 5.379196] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 5.389289] mmcblk0: mmc0:0001 SD16G 14.6 GiB [ 5.402980] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 5.475192] fsl-ssi-dai 50014000.ssi: No cache defaults, reading back from HW [ 5.494535] NET: Registered PF_INET6 protocol family [ 5.507258] Segment Routing with IPv6 [ 5.511125] In-situ OAM (IOAM) with IPv6 [ 5.515920] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.525241] NET: Registered PF_PACKET protocol family [ 5.530465] can: controller area network core [ 5.535322] NET: Registered PF_CAN protocol family [ 5.540163] can: raw protocol [ 5.543716] can: broadcast manager protocol [ 5.548093] can: netlink gateway - max_hops=1 [ 5.553364] Key type dns_resolver registered [ 5.559559] Registering SWP/SWPB emulation handler [ 5.566284] Loading compiled-in X.509 certificates [ 5.734192] imx_usb 53f80000.usb: No over current polarity defined [ 5.758995] imx_usb 53f80200.usb: No over current polarity defined [ 5.771690] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 5.777573] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 5.822331] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 5.834755] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.843969] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.851343] usb usb1: Product: EHCI Host Controller [ 5.856450] usb usb1: Manufacturer: Linux 6.1.31 ehci_hcd [ 5.862086] usb usb1: SerialNumber: ci_hdrc.1 [ 5.875105] hub 1-0:1.0: USB hub found [ 5.879552] hub 1-0:1.0: 1 port detected [ 5.896005] fsl-ssi-dai 50014000.ssi: No cache defaults, reading back from HW [ 5.916332] fsl-ssi-dai 50014000.ssi: No cache defaults, reading back from HW [ 5.930354] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 5.947969] fsl-ssi-dai 50014000.ssi: No cache defaults, reading back from HW [ 5.956275] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.040553] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.050395] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 6.059475] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 6.068757] ALSA device list: [ 6.072520] No soundcards found. [ 6.081174] Freeing unused kernel image (initmem) memory: 1024K [ 6.115253] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 6.813852] udevd[130]: starting version 3.2.9 [ 9.072499] random: crng init done [ 9.096823] udevd[130]: specified user 'tss' unknown [ 9.103169] udevd[130]: specified group 'tss' unknown [ 9.137483] udevd[131]: starting eudev-3.2.9 [ 12.438508] imx-sdma 63fb0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx53.bin failed with error -2 [ 12.449334] imx-sdma 63fb0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx53.bin [ 12.510853] fsl-ssi-dai 50014000.ssi: No cache defaults, reading back from HW [ 12.561436] coda 63ff4000.vpu: error -ENXIO: IRQ bit not found [ 12.674256] coda 63ff4000.vpu: Direct firmware load for vpu_fw_imx53.bin failed with error -2 [ 12.683197] coda 63ff4000.vpu: Falling back to sysfs fallback for: vpu_fw_imx53.bin [ 12.736782] fsl-asoc-card sound: ASoC: driver name too long 'imx53-qsb-sgtl5000' -> 'imx53-qsb-sgtl5' done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-968879/environment . /lava-968879/environment / # /lava-968879/bin/lava-test-runner /lava-968879/0 /lava-968879/bin/lava-test-runner /lava-968879/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-968879/0/tests/0_dmesg + cat uuid + UUID=968879_1.5.2.3.1[ 14.970751] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 15.149998] [ 15.308428] [ 15.465146] + set +x [ 15.480059] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-968879/environment / # . /lava-968879/environment/lava-968879/bin/lava-test-runner /lava-968879/1 / # /lava-968879/bin/lava-test-runner /lava-968879/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-968879/1/tests/1_bootrr + cat uuid + UUID=968879_1.5.2.3.5[ 16.191721] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-968879/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-968879/1/../bin/lava-test-case [ 16.406687] /lava-968879/1/../bin/lava-test-case [ 16.599776] /lava-968879/1/../bin/lava-test-case [ 16.677944] + set +x [ 16.738540] / #