connecting to NetworkSerialPort(target=Target(name='imx28-duckbill-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4014, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4014 connected to 10.8.254.5 (port 4014) Escape character: Ctrl-\ Type the escape character to get to the prompt. HTLLCLLC barebox 2020.05.0-00003-g4c4057edd6 #6 Fri May 29 14:12:02 CEST 2020 Board: I2SE Duckbill detected i.MX28 revision 1.2 mdio_bus: miibus0: probed eth0: got preset MAC address: 00:04:9f:06:00:04 mxs_mci 80010000.spi@80010000.of: registered as mci0 mci0: detected SD card version 2.0 mci0: registered disk0 malloc space: 0x43efdac0 -> 0x47dfb57f (size 63 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mI2SE Duckbill:/[0m bootm -v -r /mnt/tftp/968895/tftp-deploy-2cbmqqh3/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/968895/tftp-deploy-2cbmqqh3/dtb/imx28-duckbill.dtb /mnt/tftp/968895/tftp-deploy-2cbmqqh3/kernel/zImage [1;32mbarebox@[1;36mI2SE Duckbill:/[0m bootm -v -r /mnt/tftp/968895/tftp-deploy-2cbmqqh3/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/968895/tftp-deploy-2cbmqqh3/dtb/imx28-duckbill.dtb /mnt/tftp/968895/tftp-deploy-2cbmqqh3/kernel/zImage eth0: 100Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.53 Loading ARM Linux zImage '/mnt/tftp/968895/tftp-deploy-2cbmqqh3/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x41c25000 no initrd load address, defaulting to 0x422c6000 Loaded initrd GZIP compressed '/mnt/tftp/968895/tftp-deploy-2cbmqqh3/ramdisk/ramdisk.cpio.gz' initrd is at 0x422c6000-0x42aa6a1a Loading devicetree from '/mnt/tftp/968895/tftp-deploy-2cbmqqh3/dtb/imx28-duckbill.dtb' commandline: console=ttyAMA0,115200n8 Starting kernel at 0x41c25000, initrd at 0x422c6000, oftree at 0x42aa7000... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.31 (KernelCI@build-j1615004-arm-gcc-10-mxs-defconfig-fs746) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Tue Jun 6 12:19:17 UTC 2023 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: I2SE Duckbill [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 102592K/131072K available (8394K kernel code, 1198K rwdata, 2572K rodata, 248K init, 6472K bss, 28480K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] Running RCU self tests [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: mxs_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.003386] Console: colour dummy device 80x30 [ 0.003672] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003714] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003750] ... MAX_LOCK_DEPTH: 48 [ 0.003782] ... MAX_LOCKDEP_KEYS: 8192 [ 0.003811] ... CLASSHASH_SIZE: 4096 [ 0.003838] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.003865] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.003891] ... CHAINHASH_SIZE: 32768 [ 0.003917] memory used by lock dependency info: 4061 kB [ 0.003945] memory used for stack traces: 2112 kB [ 0.003972] per task-struct memory footprint: 1536 bytes [ 0.004261] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496) [ 0.081583] pid_max: default: 32768 minimum: 301 [ 0.083998] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.084124] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.097876] CPU: Testing write buffer coherency: ok [ 0.111328] Setting up static identity map for 0x40008400 - 0x40008458 [ 0.122653] devtmpfs: initialized [ 0.193949] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.194218] futex hash table entries: 256 (order: 1, 12288 bytes, linear) [ 0.195836] pinctrl core: initialized pinctrl subsystem [ 0.218241] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.222536] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.460650] Serial: AMBA PL011 UART driver [ 0.466657] 80074000.serial: ttyAMA0 at MMIO 0x80074000 (irq = 182, base_baud = 0) is a PL011 rev2 [ 0.778986] printk: console [ttyAMA0] enabled [ 3.174665] SCSI subsystem initialized [ 3.182885] usbcore: registered new interface driver usbfs [ 3.189635] usbcore: registered new interface driver hub [ 3.195582] usbcore: registered new device driver usb [ 3.207566] pps_core: LinuxPPS API ver. 1 registered [ 3.212867] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.222463] PTP clock support registered [ 3.230346] Advanced Linux Sound Architecture Driver Initialized. [ 3.251429] clocksource: Switched to clocksource mxs_timer [ 3.410262] NET: Registered PF_INET protocol family [ 3.418193] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 3.432248] tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 5120 bytes, linear) [ 3.440877] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.449066] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 3.457256] TCP bind hash table entries: 1024 (order: 4, 81920 bytes, linear) [ 3.465710] TCP: Hash tables configured (established 1024 bind 1024) [ 3.473564] UDP hash table entries: 256 (order: 2, 24576 bytes, linear) [ 3.480705] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear) [ 3.489785] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.503201] RPC: Registered named UNIX socket transport module. [ 3.509579] RPC: Registered udp transport module. [ 3.514633] RPC: Registered tcp transport module. [ 3.519477] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.537127] Unpacking initramfs... [ 7.692858] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 7.946235] NFS: Registering the id_resolver key type [ 7.964206] Key type id_resolver registered [ 7.968872] Key type id_legacy registered [ 7.982567] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 8.006169] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 8.014293] io scheduler mq-deadline registered [ 8.019003] io scheduler kyber registered [ 8.119399] mxs-dma 80004000.dma-apbh: initialized [ 8.170126] mxs-dma 80024000.dma-apbx: initialized [ 8.198242] 8006a000.serial: ttyAPP0 at MMIO 0x8006a000 (irq = 184, base_baud = 1500000) is a 8006a000.serial [ 8.225716] mxs-auart 8006a000.serial: Found APPUART 3.1.0 [ 8.533967] Freeing initrd memory: 8068K [ 8.625373] usbcore: registered new interface driver asix [ 8.631374] usbcore: registered new interface driver ax88179_178a [ 8.638280] usbcore: registered new interface driver cdc_ether [ 8.645073] usbcore: registered new interface driver smsc95xx [ 8.651633] usbcore: registered new interface driver net1080 [ 8.657955] usbcore: registered new interface driver cdc_subset [ 8.664730] usbcore: registered new interface driver zaurus [ 8.671227] usbcore: registered new interface driver cdc_ncm [ 8.677676] usbcore: registered new interface driver r8153_ecm [ 8.684474] usbcore: registered new interface driver usb-storage [ 8.728840] stmp3xxx-rtc 80056000.rtc: registered as rtc0 [ 8.735003] stmp3xxx-rtc 80056000.rtc: setting system clock to 1970-01-01T00:00:18 UTC (18) [ 8.746604] i2c_dev: i2c /dev entries driver [ 8.762543] stmp3xxx_rtc_wdt stmp3xxx_rtc_wdt: initialized watchdog with heartbeat 19s [ 8.825988] usbcore: registered new interface driver usbhid [ 8.831917] usbhid: USB HID core driver [ 8.849863] mxs-mmc 80010000.spi: initialized [ 8.900092] mmc0: host does not support reading read-only switch, assuming write-enable [ 8.915053] NET: Registered PF_PACKET protocol family [ 8.921202] Key type dns_resolver registered [ 8.929221] mmc0: new high speed SDHC card at address 1234 [ 8.936670] registered taskstats version 1 [ 8.978365] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 9.073472] mmcblk0: p1 [ 9.233817] ALSA device list: [ 9.237401] No soundcards found. [ 9.248271] uart-pl011 80074000.serial: no DMA platform data [ 9.256351] Freeing unused kernel image (initmem) memory: 248K [ 9.262609] Kernel memory protection not selected by kernel config. [ 9.269092] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 10.585389] udevd[85]: starting version 3.2.9 [ 12.973089] random: crng init done [ 13.046153] udevd[85]: specified user 'tss' unknown [ 13.053969] udevd[85]: specified group 'tss' unknown [ 13.103919] udevd[86]: starting eudev-3.2.9 done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-968895/environment . /lava-968895/environment / # /lava-968895/bin/lava-test-runner /lava-968895/0 /lava-968895/bin/lava-test-runner /lava-968895/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-968895/0/tests/0_dmesg + cat uuid + UUID=968895_1.5.2.3.1 + set +x [ 20.885055] + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 21.229510] [ 21.528195] [ 21.904519] + set +x [ 21.924877] # / # #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-968895/environment / # . /lava-968895/environment/lava-968895/bin/lava-test-runner /lava-968895/1 / # /lava-968895/bin/lava-test-runner /lava-968895/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-968895/1/tests/1_bootrr + cat uuid + UUID=968895_1.5.2.3.5 + set +x [ 22.860878] + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-968895/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-968895/1/../bin/lava-test-case [ 23.267839] /lava-968895/1/../bin/lava-test-case [ 23.547098] /lava-968895/1/../bin/lava-test-case [ 23.696875] + set +x [ 23.800333] / #