connecting to NetworkSerialPort(target=Target(name='imx53-qsrb-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4010, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4010 connected to 10.8.254.5 (port 4010) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: Freescale i.MX53 Quick Start-R Board detected i.MX53 revision 2.1 mc13xxx-i2c mc347080: Found MC34708 ID: 0x014 mdio_bus: miibus0: probed eth0: got preset MAC address: 00:04:9f:02:71:b3 imx-usb 53f80200.usb@53f80200.of: USB EHCI 1.00 imx-esdhc 50004000.mmc@50004000.of: registered as mmc0 imx-esdhc 50020000.mmc@50020000.of: registered as mmc2 imx-ipuv3 18000000.ipu@18000000.of: IPUv3M probed netconsole: registered as netconsole-1 malloc space: 0xbfe7d3c0 -> 0xcfcfa77f (size 254.5 MiB) mmc0: detected SD card version 2.0 mmc0: registered mmc0 MCIMX53-START-R board 1.0 rev B envfs: no envfs (magic mismatch) - envfs never written? [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mFreescale i.MX53 Quick Start-R Board:/[0m bootm -v -r /mnt/tftp/977220/tftp-deploy-x1q9bpp9/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/977220/tftp-deploy-x1q9bpp9/dtb/imx53-qsrb.dtb /mnt/tftp/977220/tftp-deploy-x1q9bpp9/kernel/zImage [1;32mbarebox@[1;36mFreescale i.MX53 Quick Start-R Board:/[0m bootm -v -r /mnt/tftp/977220/tftp-deploy-x1q9bpp9/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/977220/tftp-deploy-x1q9bpp9/dtb/imx53-qsrb.dtb /mnt/tftp/977220/tftp-deploy-x1q9bpp9/kernel/zImage eth0: 100Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.196 Loading ARM Linux zImage '/mnt/tftp/977220/tftp-deploy-x1q9bpp9/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x7377c000 no initrd load address, defaulting to 0x78000000 Loaded initrd GZIP compressed '/mnt/tftp/977220/tftp-deploy-x1q9bpp9/ramdisk/ramdisk.cpio.gz' initrd is at 0x78000000-0x789fc7d5 Loading devicetree from '/mnt/tftp/977220/tftp-deploy-x1q9bpp9/dtb/imx53-qsrb.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x7377c000, initrd at 0x78000000, oftree at 0x789fd000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.31 (KernelCI@build-j35870-arm-gcc-10-imx-v6-v7-defconfig-h4qbh) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Jun 14 12:23:52 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Freescale i.MX53 Quick Start-R Board [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 64 MiB at 0xca000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000070000000-0x000000008fffffff] [ 0.000000] HighMem [mem 0x0000000090000000-0x00000000cfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000070000000-0x000000008fffffff] [ 0.000000] node 0: [mem 0x00000000b0000000-0x00000000cfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000070000000-0x00000000cfffffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 17 pages/cpu s38388 r8192 d23052 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 261120 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 931492K/1048576K available (15360K kernel code, 2191K rwdata, 5092K rodata, 1024K init, 6673K bss, 51548K reserved, 65536K cma-reserved, 457624K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] TrustZone Interrupt Controller (TZIC) initialized [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU identified as i.MX53, silicon rev 2.1 [ 0.000000] Switching to timer-based delay loop, resolution 25ns [ 0.000004] sched_clock: 32 bits at 40MHz, resolution 25ns, wraps every 53687091187ns [ 0.000028] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 47781511156 ns [ 0.001819] Console: colour dummy device 80x30 [ 0.001906] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001919] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001931] ... MAX_LOCK_DEPTH: 48 [ 0.001942] ... MAX_LOCKDEP_KEYS: 8192 [ 0.001953] ... CLASSHASH_SIZE: 4096 [ 0.001965] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001975] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001986] ... CHAINHASH_SIZE: 32768 [ 0.001997] memory used by lock dependency info: 4061 kB [ 0.002008] memory used for stack traces: 2112 kB [ 0.002019] per task-struct memory footprint: 1536 bytes [ 0.002147] Calibrating delay loop (skipped), value calculated using timer frequency.. 80.00 BogoMIPS (lpj=400000) [ 0.002186] pid_max: default: 32768 minimum: 301 [ 0.002853] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.002891] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.007063] CPU: Testing write buffer coherency: ok [ 0.007245] CPU0: Spectre v2: using BPIALL workaround [ 0.008841] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.013114] cblist_init_generic: Setting adjustable number of callback queues. [ 0.013197] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.013684] Running RCU-tasks wait API self tests [ 0.014051] Setting up static identity map for 0x70100000 - 0x70100078 [ 0.014801] Callback from call_rcu_tasks_trace() invoked. [ 0.015113] rcu: Hierarchical SRCU implementation. [ 0.015129] rcu: Max phase no-delay instances is 1000. [ 0.017779] smp: Bringing up secondary CPUs ... [ 0.017807] smp: Brought up 1 node, 1 CPU [ 0.017823] SMP: Total of 1 processors activated (80.00 BogoMIPS). [ 0.017841] CPU: All CPU(s) started in SVC mode. [ 0.021306] devtmpfs: initialized [ 0.058497] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 [ 0.061471] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.061562] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.067802] pinctrl core: initialized pinctrl subsystem [ 0.075530] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.103117] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.120971] thermal_sys: Registered thermal governor 'step_wise' [ 0.121450] cpuidle: using governor menu [ 0.122802] No ATAGs? [ 0.122832] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.138620] platform 18000000.ipu: Fixed dependency cycle(s) with /soc/bus@60000000/tve@63ff0000 [ 0.158603] imx53-pinctrl 53fa8000.iomuxc: initialized IMX pinctrl driver [ 0.232090] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.326526] SCSI subsystem initialized [ 1.329030] usbcore: registered new interface driver usbfs [ 1.329605] usbcore: registered new interface driver hub [ 1.329801] usbcore: registered new device driver usb [ 1.330294] usb_phy_generic usbphy-0: supply vcc not found, using dummy regulator [ 1.331642] usb_phy_generic usbphy-0: dummy supplies not allowed for exclusive requests [ 1.332291] usb_phy_generic usbphy-1: supply vcc not found, using dummy regulator [ 1.333041] usb_phy_generic usbphy-1: dummy supplies not allowed for exclusive requests [ 1.338441] i2c i2c-1: IMX I2C adapter registered [ 1.368700] mc13xxx 0-0008: mc34708: rev 2.4, fin: 0, fab: 0 [ 1.444941] i2c i2c-0: IMX I2C adapter registered [ 1.446081] mc: Linux media interface: v0.10 [ 1.446469] videodev: Linux video capture interface: v2.00 [ 1.447304] pps_core: LinuxPPS API ver. 1 registered [ 1.447327] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.447407] PTP clock support registered [ 1.450160] Advanced Linux Sound Architecture Driver Initialized. [ 1.455665] Bluetooth: Core ver 2.22 [ 1.455868] NET: Registered PF_BLUETOOTH protocol family [ 1.455884] Bluetooth: HCI device and connection manager initialized [ 1.456050] Bluetooth: HCI socket layer initialized [ 1.456087] Bluetooth: L2CAP socket layer initialized [ 1.456265] Bluetooth: SCO socket layer initialized [ 1.459427] vgaarb: loaded [ 1.461969] clocksource: Switched to clocksource mxc_timer1 [ 1.474249] VFS: Disk quotas dquot_6.6.0 [ 1.474465] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.539500] NET: Registered PF_INET protocol family [ 1.540565] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.553820] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 10240 bytes, linear) [ 1.553925] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.553973] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 1.554173] TCP bind hash table entries: 4096 (order: 6, 327680 bytes, linear) [ 1.555509] TCP: Hash tables configured (established 4096 bind 4096) [ 1.556167] UDP hash table entries: 256 (order: 2, 24576 bytes, linear) [ 1.556315] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear) [ 1.556920] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.560414] RPC: Registered named UNIX socket transport module. [ 1.560480] RPC: Registered udp transport module. [ 1.560495] RPC: Registered tcp transport module. [ 1.560509] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.572254] PCI: CLS 0 bytes, default 64 [ 1.575441] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 1.581675] Initialise system trusted keyrings [ 1.585093] Trying to unpack rootfs image as initramfs... [ 1.603442] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 1.685001] NFS: Registering the id_resolver key type [ 1.685220] Key type id_resolver registered [ 1.685268] Key type id_legacy registered [ 1.685663] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.685782] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.686029] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.702666] fuse: init (API version 7.37) [ 1.962521] Key type asymmetric registered [ 1.962861] Asymmetric key parser 'x509' registered [ 1.963815] bounce: pool size: 64 pages [ 1.964381] io scheduler mq-deadline registered [ 1.964411] io scheduler kyber registered [ 2.034415] 53fbc000.serial: ttymxc0 at MMIO 0x53fbc000 (irq = 47, base_baud = 4166666) is a IMX [ 4.122838] printk: console [ttymxc0] enabled [ 4.153558] Stack Depot allocating hash table of 32768 entries with kvcalloc [ 4.161754] [drm] using 16m VRAM carveout [ 4.197096] msm msm: [drm:msm_drm_bind] VRAM: ca100000->cb100000 [ 4.222934] adreno 30000000.gpu: Could not find a clock rate. Using a reasonable default [ 4.243715] adreno 30000000.gpu: supply vdd not found, using dummy regulator [ 4.263474] adreno 30000000.gpu: supply vddcx not found, using dummy regulator [ 4.292433] msm msm: bound 30000000.gpu (ops a3xx_ops) [ 4.314990] [drm] Initialized msm 1.9.0 20130625 for msm on minor 0 [ 4.354303] seiko_panel panel: supply dvdd not found, using dummy regulator [ 4.372967] seiko_panel panel: supply avdd not found, using dummy regulator [ 4.416321] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 4.433888] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 4.452904] imx-drm display-subsystem: bound 63ff0000.tve (ops imx_tve_ops) [ 4.475618] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 4.583986] Console: switching to colour frame buffer device 128x48 [ 4.622529] imx-drm display-subsystem: [drm] fb0: imx-drmdrmfb frame buffer device [ 4.642575] imx-ipuv3 18000000.ipu: IPUv3M probed [ 4.697775] Freeing initrd memory: 10228K [ 4.739839] brd: module loaded [ 4.774978] loop: module loaded [ 4.780910] ahci-imx 10000000.sata: supply ahci not found, using dummy regulator [ 4.789431] ahci-imx 10000000.sata: supply phy not found, using dummy regulator [ 4.797388] ahci-imx 10000000.sata: supply target not found, using dummy regulator [ 4.806671] ahci-imx 10000000.sata: hwmon0: sensor 'sata_ahci' [ 4.815667] ahci-imx 10000000.sata: SSS flag set, parallel bus scan disabled [ 4.822933] ahci-imx 10000000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 4.831984] ahci-imx 10000000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc [ 4.848631] scsi host0: ahci-imx [ 4.854479] ata1: SATA max UDMA/133 mmio [mem 0x10000000-0x10000fff] port 0x100 irq 44 [ 4.877933] CAN device driver interface [ 4.950806] usbcore: registered new interface driver r8152 [ 4.956964] usbcore: registered new interface driver lan78xx [ 4.963261] usbcore: registered new interface driver asix [ 4.968820] usbcore: registered new interface driver ax88179_178a [ 4.975297] usbcore: registered new interface driver cdc_ether [ 4.981407] usbcore: registered new interface driver smsc95xx [ 4.987569] usbcore: registered new interface driver net1080 [ 4.993605] usbcore: registered new interface driver cdc_subset [ 4.999742] usbcore: registered new interface driver zaurus [ 5.005588] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 5.013373] usbcore: registered new interface driver cdc_ncm [ 5.019182] usbcore: registered new interface driver r8153_ecm [ 5.025469] usbcore: registered new interface driver usb-storage [ 5.040396] SPI driver ads7846 has no spi_device_id for ti,tsc2046 [ 5.046902] SPI driver ads7846 has no spi_device_id for ti,ads7843 [ 5.053184] SPI driver ads7846 has no spi_device_id for ti,ads7845 [ 5.059387] SPI driver ads7846 has no spi_device_id for ti,ads7873 [ 5.070151] input: mma8450 as /devices/platform/soc/60000000.bus/63fc8000.i2c/i2c-0/0-001c/input/input0 [ 5.091609] mxc_rtc_v2 53fa4000.rtc: registered as rtc0 [ 5.097739] mxc_rtc_v2 53fa4000.rtc: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 5.108124] i2c_dev: i2c /dev entries driver [ 5.128138] Bluetooth: HCI UART driver ver 2.3 [ 5.133043] Bluetooth: HCI UART protocol H4 registered [ 5.138542] Bluetooth: HCI UART protocol LL registered [ 5.153802] sdhci: Secure Digital Host Controller Interface driver [ 5.160151] sdhci: Copyright(c) Pierre Ossman [ 5.164762] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.174263] sdhci-esdhc-imx 50004000.mmc: Got CD GPIO [ 5.186595] sdhci-esdhc-imx 50020000.mmc: Got CD GPIO [ 5.191781] sdhci-esdhc-imx 50020000.mmc: Got WP GPIO [ 5.197348] ata1: SATA link down (SStatus 0 SControl 300) [ 5.209161] ahci-imx 10000000.sata: no device found, disabling link. [ 5.215900] ahci-imx 10000000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 5.243478] sahara 63ff8000.crypto: SAHARA version 4 initialized [ 5.251040] usbcore: registered new interface driver usbhid [ 5.256907] usbhid: USB HID core driver [ 5.269216] imx-ipuv3-csi imx-ipuv3-csi.0: Registered ipu1_csi0 capture as /dev/video0 [ 5.281511] mmc0: SDHCI controller on 50004000.mmc [50004000.mmc] using ADMA [ 5.291528] imx-ipuv3 18000000.ipu: Registered ipu1_ic_prpenc capture as /dev/video1 [ 5.300669] mmc2: SDHCI controller on 50020000.mmc [50020000.mmc] using ADMA [ 5.311088] imx-ipuv3 18000000.ipu: Registered ipu1_ic_prpvf capture as /dev/video2 [ 5.322482] imx-ipuv3-csi imx-ipuv3-csi.1: Registered ipu1_csi1 capture as /dev/video3 [ 5.339331] imx-media: Registered ipu_ic_pp csc/scaler as /dev/video4 [ 5.361350] mmc0: host does not support reading read-only switch, assuming write-enable [ 5.377523] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 5.383236] mmc0: new high speed SDHC card at address 0001 [ 5.396713] mmcblk0: mmc0:0001 SD16G 14.6 GiB [ 5.408457] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 5.481040] fsl-ssi-dai 50014000.ssi: No cache defaults, reading back from HW [ 5.500943] NET: Registered PF_INET6 protocol family [ 5.514391] Segment Routing with IPv6 [ 5.518257] In-situ OAM (IOAM) with IPv6 [ 5.522615] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.532077] NET: Registered PF_PACKET protocol family [ 5.537197] can: controller area network core [ 5.542170] NET: Registered PF_CAN protocol family [ 5.547093] can: raw protocol [ 5.550373] can: broadcast manager protocol [ 5.554786] can: netlink gateway - max_hops=1 [ 5.559933] Key type dns_resolver registered [ 5.566527] Registering SWP/SWPB emulation handler [ 5.573134] Loading compiled-in X.509 certificates [ 5.740501] imx_usb 53f80000.usb: No over current polarity defined [ 5.765365] imx_usb 53f80200.usb: No over current polarity defined [ 5.777723] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 5.783833] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 5.822169] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 5.830442] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.839214] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.847129] usb usb1: Product: EHCI Host Controller [ 5.852232] usb usb1: Manufacturer: Linux 6.1.31 ehci_hcd [ 5.857670] usb usb1: SerialNumber: ci_hdrc.1 [ 5.869520] hub 1-0:1.0: USB hub found [ 5.876409] hub 1-0:1.0: 1 port detected [ 5.893053] fsl-ssi-dai 50014000.ssi: No cache defaults, reading back from HW [ 5.909308] fsl-ssi-dai 50014000.ssi: No cache defaults, reading back from HW [ 5.927489] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 5.945272] fsl-ssi-dai 50014000.ssi: No cache defaults, reading back from HW [ 5.953533] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.039673] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.049697] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 6.058818] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 6.068040] ALSA device list: [ 6.071392] No soundcards found. [ 6.080515] Freeing unused kernel image (initmem) memory: 1024K [ 6.115099] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 6.810926] udevd[130]: starting version 3.2.9 [ 9.072634] random: crng init done [ 9.096867] udevd[130]: specified user 'tss' unknown [ 9.103076] udevd[130]: specified group 'tss' unknown [ 9.136501] udevd[131]: starting eudev-3.2.9 [ 12.420433] imx-sdma 63fb0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx53.bin failed with error -2 [ 12.431295] imx-sdma 63fb0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx53.bin [ 12.487695] fsl-ssi-dai 50014000.ssi: No cache defaults, reading back from HW [ 12.628004] coda 63ff4000.vpu: error -ENXIO: IRQ bit not found [ 12.685970] coda 63ff4000.vpu: Direct firmware load for vpu_fw_imx53.bin failed with error -2 [ 12.694868] coda 63ff4000.vpu: Falling back to sysfs fallback for: vpu_fw_imx53.bin [ 12.794649] fsl-asoc-card sound: ASoC: driver name too long 'imx53-qsb-sgtl5000' -> 'imx53-qsb-sgtl5' done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-977220/environment . /lava-977220/environment / # /lava-977220/bin/lava-test-runner /lava-977220/0 /lava-977220/bin/lava-test-runner /lava-977220/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-977220/0/tests/0_dmesg + cat uuid + UUID=977220_1.5.2.3.1 + set +x [ 14.952853] + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 15.133234] [ 15.289424] [ 15.449370] + set +x [ 15.465159] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-977220/environment / # . /lava-977220/environment/lava-977220/bin/lava-test-runner /lava-977220/1 / # /lava-977220/bin/lava-test-runner /lava-977220/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-977220/1/tests/1_bootrr + cat uuid + UUID=977220_1.5.2.3.5[ 16.179686] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-977220/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-977220/1/../bin/lava-test-case [ 16.396825] /lava-977220/1/../bin/lava-test-case [ 16.589868] /lava-977220/1/../bin/lava-test-case [ 16.668797] + set +x [ 16.729912] / #