[Enter `^Ec?' for help] U-Boot SPL 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45) U-Boot 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45 +0000) Model: Radxa Rock 2 Square DRAM: 2 GiB MMC: dwmmc@ff0c0000: 0, dwmmc@ff0f0000: 1 In: serial@ff690000 Out: serial@ff690000 Err: serial@ff690000 Incorrect eeprom header Net: eth0: ethernet@ff290000 Hit any key to stop autoboot: 1  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp ethernet@ff290000 Waiting for PHY auto negotiation to complete...... done Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.201.22 (759 ms) => setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 => tftp 0x2000000 11299326/tftp-deploy-zuxnnlv6/kernel/zImage tftp 0x2000000 11299326/tftp-deploy-zuxnnlv6/kernel/zImage Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.22 Filename '11299326/tftp-deploy-zuxnnlv6/kernel/zImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################ 3.6 MiB/s done Bytes transferred = 10473984 (9fd200 hex) => tftp 0x4000000 11299326/tftp-deploy-zuxnnlv6/ramdisk/ramdisk.cpio.gz.uboot tftp 0x4000000 11299326/tftp-deploy-zuxnnlv6/ramdisk/ramdisk.cpio.gz.uboot Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.22 Filename '11299326/tftp-deploy-zuxnnlv6/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x4000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################ 3.6 MiB/s done Bytes transferred = 17155690 (105c66a hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x1f00000 11299326/tftp-deploy-zuxnnlv6/dtb/rk3288-rock2-square.dtb tftp 0x1f00000 11299326/tftp-deploy-zuxnnlv6/dtb/rk3288-rock2-square.dtb Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.22 Filename '11299326/tftp-deploy-zuxnnlv6/dtb/rk3288-rock2-square.dtb'. Load address: 0x1f00000 Loading: *### 3.3 MiB/s done Bytes transferred = 41716 (a2f4 hex) => setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x2000000 0x4000000 0x1f00000 bootz 0x2000000 0x4000000 0x1f00000 Kernel image @ 0x2000000 [ 0x000000 - 0x9fd200 ] ## Loading init Ramdisk from Legacy Image at 04000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17155626 Bytes = 16.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Using Device Tree in place at 01f00000, end 01f0d2f3 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x500 [ 0.000000] Linux version 6.1.45-cip3 (KernelCI@build-j14880-arm-gcc-10-multi-v7-defconfig-6wfwz) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Aug 16 12:10:20 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Radxa Rock 2 Square [ 0.000000] earlycon: uart0 at MMIO32 0xff690000 (options '115200n8') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 1970772K/2097152K available (14336K kernel code, 2468K rwdata, 6256K rodata, 2048K init, 428K bss, 60844K reserved, 65536K cma-reserved, 1245184K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns <6>[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns <6>[ 0.009083] Switching to timer-based delay loop, resolution 41ns <6>[ 0.023689] Console: colour dummy device 80x30 <6>[ 0.028905] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.040579] CPU: Testing write buffer coherency: ok <6>[ 0.046257] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.052102] pid_max: default: 32768 minimum: 301 <6>[ 0.057633] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.065975] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.075709] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500 <6>[ 0.083342] Setting up static identity map for 0x300000 - 0x3000ac <6>[ 0.092538] rcu: Hierarchical SRCU implementation. <6>[ 0.098085] rcu: Max phase no-delay instances is 1000. <6>[ 0.109134] EFI services will not be available. <6>[ 0.114766] smp: Bringing up secondary CPUs ... <6>[ 0.121859] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501 <6>[ 0.121879] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.136191] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502 <6>[ 0.136210] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.150467] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503 <6>[ 0.150486] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.162939] smp: Brought up 1 node, 4 CPUs <6>[ 0.167755] SMP: Total of 4 processors activated (192.00 BogoMIPS). <6>[ 0.174925] CPU: All CPU(s) started in SVC mode. <6>[ 0.180924] devtmpfs: initialized <6>[ 0.194606] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0 <6>[ 0.203574] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.214692] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.224500] pinctrl core: initialized pinctrl subsystem <6>[ 0.234536] DMI not present or invalid. <6>[ 0.239873] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.249059] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.259963] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.260035] cpuidle: using governor menu <6>[ 0.272190] No ATAGs? <6>[ 0.275109] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.284216] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.294459] Serial: AMBA PL011 UART driver <6>[ 0.323532] platform ff940000.vop: Fixed dependency cycle(s) with /hdmi@ff980000 <6>[ 0.332054] platform ff930000.vop: Fixed dependency cycle(s) with /hdmi@ff980000 <6>[ 0.356995] rockchip-gpio ff750000.gpio: probed /pinctrl/gpio@ff750000 <6>[ 0.365225] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000 <6>[ 0.373387] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000 <6>[ 0.381585] rockchip-gpio ff7a0000.gpio: probed /pinctrl/gpio@ff7a0000 <6>[ 0.389835] rockchip-gpio ff7b0000.gpio: probed /pinctrl/gpio@ff7b0000 <6>[ 0.398038] rockchip-gpio ff7c0000.gpio: probed /pinctrl/gpio@ff7c0000 <6>[ 0.406200] rockchip-gpio ff7d0000.gpio: probed /pinctrl/gpio@ff7d0000 <6>[ 0.414412] rockchip-gpio ff7e0000.gpio: probed /pinctrl/gpio@ff7e0000 <6>[ 0.422581] rockchip-gpio ff7f0000.gpio: probed /pinctrl/gpio@ff7f0000 <6>[ 0.461853] iommu: Default domain type: Translated <6>[ 0.467500] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.475594] SCSI subsystem initialized <6>[ 0.480503] usbcore: registered new interface driver usbfs <6>[ 0.486912] usbcore: registered new interface driver hub <6>[ 0.493072] usbcore: registered new device driver usb <6>[ 0.501660] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.507399] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.517750] PTP clock support registered <6>[ 0.522610] EDAC MC: Ver: 3.0.0 <6>[ 0.530157] vgaarb: loaded <6>[ 2.074939] clocksource: Switched to clocksource arch_sys_counter <6>[ 2.093497] NET: Registered PF_INET protocol family <6>[ 2.099438] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 2.110293] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 2.119813] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 2.128641] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 2.137519] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 2.146111] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 2.153469] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 2.161083] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 2.169332] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 2.176395] RPC: Registered named UNIX socket transport module. <6>[ 2.183185] RPC: Registered udp transport module. <6>[ 2.188669] RPC: Registered tcp transport module. <6>[ 2.194118] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.201493] PCI: CLS 0 bytes, default 64 <6>[ 2.206562] Trying to unpack rootfs image as initramfs... <6>[ 2.213809] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available <5>[ 2.225011] Initialise system trusted keyrings <6>[ 2.230458] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 2.244796] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 2.252339] NFS: Registering the id_resolver key type <5>[ 2.258246] Key type id_resolver registered <5>[ 2.263126] Key type id_legacy registered <6>[ 2.267962] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 2.275634] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 2.284088] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 2.289758] Key type asymmetric registered <5>[ 2.294547] Asymmetric key parser 'x509' registered <6>[ 2.300403] bounce: pool size: 64 pages <6>[ 2.305062] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 2.313473] io scheduler mq-deadline registered <6>[ 2.318750] io scheduler kyber registered <6>[ 2.380688] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 2.389347] dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 <6>[ 2.401078] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 2.409729] dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10 <6>[ 2.504210] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 2.514878] printk: console [ttyS2] disabled <6>[ 2.519963] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 47, base_baud = 1500000) is a 16550A <6>[ 2.530176] printk: console [ttyS2] enabled <6>[ 2.530176] printk: console [ttyS2] enabled <6>[ 2.540160] printk: bootconsole [uart0] disabled <6>[ 2.540160] printk: bootconsole [uart0] disabled <6>[ 2.554932] SuperH (H)SCI(F) driver initialized <6>[ 2.562105] msm_serial: driver initialized <6>[ 2.567027] STMicroelectronics ASC driver initialized <6>[ 2.574910] STM32 USART driver initialized <6>[ 2.606541] brd: module loaded <6>[ 2.617336] loop: module loaded <6>[ 2.639750] CAN device driver interface <6>[ 2.646453] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 2.655191] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 2.661038] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 2.668037] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 2.674369] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 2.689189] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 2.695798] usbcore: registered new interface driver pegasus <6>[ 2.702471] usbcore: registered new interface driver asix <6>[ 2.708877] usbcore: registered new interface driver ax88179_178a <6>[ 2.716046] usbcore: registered new interface driver cdc_ether <6>[ 2.722917] usbcore: registered new interface driver smsc75xx <6>[ 2.729708] usbcore: registered new interface driver smsc95xx <6>[ 2.736488] usbcore: registered new interface driver net1080 <6>[ 2.743166] usbcore: registered new interface driver cdc_subset <6>[ 2.750143] usbcore: registered new interface driver zaurus <6>[ 2.756775] usbcore: registered new interface driver cdc_ncm <4>[ 2.766972] dwc2 ff540000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.775457] dwc2 ff540000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.845372] dwc2 ff540000.usb: DWC OTG Controller <6>[ 2.850959] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.859217] dwc2 ff540000.usb: irq 51, io mem 0xff540000 <6>[ 2.866376] hub 1-0:1.0: USB hub found <6>[ 2.870916] hub 1-0:1.0: 1 port detected <4>[ 2.876410] dwc2 ff580000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.884860] dwc2 ff580000.usb: supply vusb_a not found, using dummy regulator <6>[ 3.035006] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM <6>[ 3.045150] dwc2 ff580000.usb: DWC OTG Controller <6>[ 3.050735] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2 <6>[ 3.058976] dwc2 ff580000.usb: irq 52, io mem 0xff580000 <6>[ 3.066075] hub 2-0:1.0: USB hub found <6>[ 3.070614] hub 2-0:1.0: 1 port detected <6>[ 3.078127] ehci-platform ff500000.usb: EHCI Host Controller <6>[ 3.081115] usbcore: registered new interface driver usb-storage <6>[ 3.084780] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3 <6>[ 3.100814] i2c_dev: i2c /dev entries driver <6>[ 3.111764] ehci-platform ff500000.usb: irq 53, io mem 0xff500000 <6>[ 3.115774] VDD_LOG: Bringing 1100000uV into 1000000-1000000uV <6>[ 3.151661] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! <6>[ 3.154932] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00 <6>[ 3.164340] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! <6>[ 3.167736] hub 3-0:1.0: USB hub found <6>[ 3.179451] hub 3-0:1.0: 1 port detected <4>[ 3.198199] dw_wdt ff800000.watchdog: No valid TOPs array specified <6>[ 3.216670] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 500000 KHz, changing to: 600000 KHz <6>[ 3.232170] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.239407] sdhci: Copyright(c) Pierre Ossman <6>[ 3.247398] Synopsys Designware Multimedia Card Interface Driver <6>[ 3.255191] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.255607] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 3.272101] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.279814] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.286376] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.297529] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.305581] usbcore: registered new interface driver usbhid <6>[ 3.312100] usbhid: USB HID core driver <6>[ 3.320181] NET: Registered PF_INET6 protocol family <6>[ 3.326600] Segment Routing with IPv6 <6>[ 3.331010] In-situ OAM (IOAM) with IPv6 <6>[ 3.335742] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 3.342951] NET: Registered PF_PACKET protocol family <6>[ 3.348913] can: controller area network core <6>[ 3.354105] NET: Registered PF_CAN protocol family <6>[ 3.359780] can: raw protocol <6>[ 3.363388] can: broadcast manager protocol <6>[ 3.368368] can: netlink gateway - max_hops=1 <5>[ 3.373735] Key type dns_resolver registered <6>[ 3.378868] ThumbEE CPU extension supported. <5>[ 3.383933] Registering SWP/SWPB emulation handler <5>[ 3.389940] Loading compiled-in X.509 certificates <6>[ 3.416659] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found <6>[ 3.423913] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock <6>[ 3.431531] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input). <6>[ 3.439738] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30). <6>[ 3.443191] Freeing initrd memory: 16756K <6>[ 3.446365] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10). <6>[ 3.457746] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no). <6>[ 3.464965] rk_gmac-dwmac ff290000.ethernet: clock input from PHY <6>[ 3.477068] rk_gmac-dwmac ff290000.ethernet: init for RGMII <6>[ 3.483670] usb 3-1: new high-speed USB device number 2 using ehci-platform <6>[ 3.491768] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35 <6>[ 3.500046] rk_gmac-dwmac ff290000.ethernet: DWMAC1000 <6>[ 3.506177] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported <6>[ 3.514829] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported <6>[ 3.523484] rk_gmac-dwmac ff290000.ethernet: COE Type 2 <6>[ 3.529612] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported <6>[ 3.537782] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported <6>[ 3.545313] rk_gmac-dwmac ff290000.ethernet: Normal descriptors <6>[ 3.552215] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled <6>[ 3.559026] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer <6>[ 3.686741] hub 3-1:1.0: USB hub found <6>[ 3.691565] hub 3-1:1.0: 4 ports detected <6>[ 3.702074] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL) <6>[ 3.713665] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL) <6>[ 3.732129] dwmmc_rockchip ff0c0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.733289] dwmmc_rockchip ff0f0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.733651] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <6>[ 3.735232] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.764504] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.772209] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.778754] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.789893] dwmmc_rockchip ff0c0000.mmc: Using internal DMA controller. <6>[ 3.795152] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.797597] dwmmc_rockchip ff0c0000.mmc: Version ID is 270a <6>[ 3.812300] dwmmc_rockchip ff0c0000.mmc: DW MMC controller at irq 62,32 bit host data width,256 deep fifo <6>[ 3.823463] dwmmc_rockchip ff0f0000.mmc: Using internal DMA controller. <6>[ 3.831156] dwmmc_rockchip ff0f0000.mmc: Version ID is 270a <6>[ 3.837704] dwmmc_rockchip ff0f0000.mmc: DW MMC controller at irq 63,32 bit host data width,256 deep fifo <6>[ 3.840519] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 3.848824] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.867012] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.867159] dwmmc_rockchip ff0f0000.mmc: allocated mmc-pwrseq <6>[ 3.873547] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.880272] mmc_host mmc1: card is non-removable. <6>[ 3.898772] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.907013] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.910725] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 3.914696] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.931812] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.946615] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 3.946757] rk_gmac-dwmac ff290000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 <6>[ 3.964497] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 3.965514] rk_gmac-dwmac ff290000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] (irq=POLL) <6>[ 3.972190] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 3.989749] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found <6>[ 3.990467] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 3.999213] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW <6>[ 4.018454] rk_gmac-dwmac ff290000.ethernet eth0: configuring for phy/rgmii link mode <6>[ 4.080722] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) <6>[ 4.093746] mmc1: new high speed MMC card at address 0001 <6>[ 4.103244] mmcblk1: mmc1:0001 032GE4 29.1 GiB <6>[ 4.118139] mmcblk1: p1 p2 <6>[ 4.121989] mmcblk1boot0: mmc1:0001 032GE4 4.00 MiB <6>[ 4.128773] mmcblk1boot1: mmc1:0001 032GE4 4.00 MiB <6>[ 4.135407] mmcblk1rpmb: mmc1:0001 032GE4 4.00 MiB, chardev (236:0) <6>[ 4.145625] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 4.153864] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 4.161561] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 4.168095] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 7.166240] rk_gmac-dwmac ff290000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 7.176202] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.224967] Sending DHCP requests .., OK <6>[ 9.909951] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.22 <6>[ 9.919371] IP-Config: Complete: <6>[ 9.923309] device=eth0, hwaddr=4a:01:9c:e5:04:ff, ipaddr=192.168.201.22, mask=255.255.255.0, gw=192.168.201.1 <6>[ 9.935462] host=rk3288-rock2-square-cbg-0, domain=lava-rack, nis-domain=(none) <6>[ 9.944470] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 9.944517] nameserver0=192.168.201.1 <4>[ 9.961484] dw-apb-uart ff690000.serial: forbid DMA for kernel console <6>[ 9.974601] Freeing unused kernel image (initmem) memory: 2048K <6>[ 9.995388] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 10.068141] udevd[115]: starting version 3.2.9 <5>[ 10.074290] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 10.082310] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 10.090092] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 10.101152] udevd[115]: specified user 'tss' unknown <27>[ 10.107162] udevd[115]: specified group 'tss' unknown <30>[ 10.113999] udevd[116]: starting eudev-3.2.9 <6>[ 10.303368] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 10.315081] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 10.322775] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 10.329334] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 10.383926] rockchip-vop ff930000.vop: Adding to iommu group 0 <6>[ 10.391103] rockchip-vop ff940000.vop: Adding to iommu group 1 <6>[ 10.393633] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 10.413755] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 10.425114] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm]) <4>[ 10.435731] dwhdmi-rockchip ff980000.hdmi: supply avdd-0v9 not found, using dummy regulator <4>[ 10.445485] dwhdmi-rockchip ff980000.hdmi: supply avdd-1v8 not found, using dummy regulator <6>[ 10.455214] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY) <6>[ 10.474956] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <4>[ 10.479920] rtc-hym8563 0-0051: no valid clock/calendar values available <6>[ 10.482645] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 10.485991] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) <6>[ 10.486374] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 <6>[ 10.486404] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 10.486605] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 10.486616] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 10.491582] rtc-hym8563 0-0051: registered as rtc0 <6>[ 10.496962] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <4>[ 10.518223] rtc-hym8563 0-0051: no valid clock/calendar values available <3>[ 10.566811] rtc-hym8563 0-0051: hctosys: unable to read the hardware clock <6>[ 10.588732] dwmmc_rockchip ff0d0000.mmc: allocated mmc-pwrseq <6>[ 10.595478] mmc_host mmc2: card is non-removable. <6>[ 10.621197] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 10.652238] panfrost ffa30000.gpu: clock rate = 400000000 <6>[ 10.673939] rk3288-crypto ff8a0000.crypto: will run requests pump with realtime priority <6>[ 10.683918] panfrost ffa30000.gpu: mali-t760 id 0x750 major 0x0 minor 0x0 status 0x1 <6>[ 10.686248] rk3288-crypto ff8a0000.crypto: Crypto Accelerator successfully registered <6>[ 10.692913] panfrost ffa30000.gpu: features: 00000000,00000407, issues: 00000000,24040400 <6>[ 10.711389] panfrost ffa30000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 <6>[ 10.724908] panfrost ffa30000.gpu: shader_present=0xf l2_present=0x1 <6>[ 10.738903] [drm] Initialized panfrost 1.2.0 20180908 for ffa30000.gpu on minor 1 done Saving random seed: OK Starting network: <6>[ 10.801190] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) ip: RTNETLINK answers: File exists <6>[ 10.816230] mmc2: new high speed SDIO card at address 0001 FAIL <5>[ 10.843023] cfg80211: Loading compiled-in X.509 certificates for regulatory database Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # <5>[ 10.880844] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 10.888526] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 10.898482] cfg80211: failed to load regulatory.db <6>[ 10.906313] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2 <4>[ 10.916403] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.radxa,rock2-square.bin failed with error -2 <4>[ 10.929672] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.bin failed with error -2 / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-11299326/environment . /lava-11299326/environment / # /lava-11299326/bin/lava-test-runner /lava-11299326/0 /lava-11299326/bin/lava-test-runner /lava-11299326/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-11299326/0/tests/0_dmesg<8>[ 11.439092] + cat uuid + UUID=11299326_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 11.472181] <8>[ 11.497954] <8>[ 11.521643] + set +x <8>[ 11.532155] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-11299326/environment / # . /lava-11299326/environment/lava-11299326/bin/lava-test-runner /lava-11299326/1 / # /lava-11299326/bin/lava-test-runner /lava-11299326/1<3>[ 11.953958] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 + export 'TESTRUN_ID=1_bootrr' + cd /lava-11299326/1/tests/1_bootrr <8>[ 12.010799] + cat uuid + UUID=11299326_1.5.2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-11299326/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-11299326/1/../bin/lava-test-case <8>[ 12.044380] /lava-11299326/1/../bin/lava-test-case <8>[ 12.068892] /lava-11299326/1/../bin/lava-test-case <8>[ 12.087754] /lava-11299326/1/../bin/lava-test-case <8>[ 12.115784] /lava-11299326/1/../bin/lava-test-case <8>[ 12.146374] /lava-11299326/1/../bin/lava-test-case <8>[ 12.167040] /lava-11299326/1/../bin/lava-test-case <8>[ 12.189741] /lava-11299326/1/../bin/lava-test-case <8>[ 12.210584] /lava-11299326/1/../bin/lava-test-case <8>[ 12.233235] + set +x <8>[ 12.242453] / #