[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.14 (259 ms) U-Boot> setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 U-Boot> tftp 0x01000000 11336299/tftp-deploy-lmkwysto/kernel/zImage tftp 0x01000000 11336299/tftp-deploy-lmkwysto/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11336299/tftp-deploy-lmkwysto/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################### 495.1 KiB/s done Bytes transferred = 6318200 (606878 hex) U-Boot> tftp 0x02200000 11336299/tftp-deploy-lmkwysto/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 11336299/tftp-deploy-lmkwysto/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11336299/tftp-deploy-lmkwysto/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################## 841.8 KiB/s done Bytes transferred = 9309834 (8e0e8a hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 11336299/tftp-deploy-lmkwysto/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 11336299/tftp-deploy-lmkwysto/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11336299/tftp-deploy-lmkwysto/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 738.3 KiB/s done Bytes transferred = 14374 (3826 hex) U-Boot> setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x606878 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9309770 Bytes = 8.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006925 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.45-cip3 (KernelCI@build-j18651-arm-gcc-10-bcm2835-defconfig-7zpxf) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Wed Aug 23 09:44:25 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:130 arm_dt_init_cpu_maps+0xec/0x15c [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.1.45-cip3 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] unwind_backtrace from show_stack+0x18/0x1c [ 0.000000] show_stack from dump_stack_lvl+0x24/0x2c [ 0.000000] dump_stack_lvl from __warn+0x88/0xec [ 0.000000] __warn from warn_slowpath_fmt+0x7c/0xb0 [ 0.000000] warn_slowpath_fmt from arm_dt_init_cpu_maps+0xec/0x15c [ 0.000000] arm_dt_init_cpu_maps from setup_arch+0x25c/0x618 [ 0.000000] setup_arch from start_kernel+0x5c/0x680 [ 0.000000] start_kernel from 0x0 [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689180K/786432K available (8192K kernel code, 1685K rwdata, 3508K rodata, 1024K init, 452K bss, 31716K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 35430 entries in 104 pages <6>[ 0.000000] ftrace: allocated 104 pages with 3 groups <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000005] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008813] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018638] bcm2835: system timer (irq = 27) <6>[ 0.023680] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030177] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041450] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049884] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056709] Console: colour dummy device 80x30 <6>[ 0.061575] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072426] CPU: Testing write buffer coherency: ok <6>[ 0.077727] pid_max: default: 32768 minimum: 301 <6>[ 0.083059] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.090806] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.101041] cblist_init_generic: Setting adjustable number of callback queues. <6>[ 0.108693] cblist_init_generic: Setting shift to 0 and lim to 1. <6>[ 0.115397] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.123769] devtmpfs: initialized <6>[ 0.133561] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.141945] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.152274] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.162913] pinctrl core: initialized pinctrl subsystem <6>[ 0.170793] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.178880] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.189344] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.189615] No ATAGs? <6>[ 0.198632] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.207063] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.213598] Serial: AMBA PL011 UART driver <6>[ 0.236215] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <5>[ 0.515460] SCSI subsystem initialized <6>[ 0.519958] usbcore: registered new interface driver usbfs <6>[ 0.525883] usbcore: registered new interface driver hub <6>[ 0.531640] usbcore: registered new device driver usb <4>[ 0.537310] usb_phy_generic phy: supply vcc not found, using dummy regulator <4>[ 0.544994] usb_phy_generic phy: dummy supplies not allowed for exclusive requests <6>[ 0.553322] mc: Linux media interface: v0.10 <6>[ 0.558013] videodev: Linux video capture interface: v2.00 <6>[ 0.563992] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.569334] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.578939] PTP clock support registered <6>[ 0.583429] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.590626] Bluetooth: Core ver 2.22 <6>[ 0.594646] NET: Registered PF_BLUETOOTH protocol family <6>[ 0.600330] Bluetooth: HCI device and connection manager initialized <6>[ 0.607103] Bluetooth: HCI socket layer initialized <6>[ 0.612347] Bluetooth: L2CAP socket layer initialized <6>[ 0.617790] Bluetooth: SCO socket layer initialized <6>[ 0.623852] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.642412] NET: Registered PF_INET protocol family <6>[ 0.648222] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.658986] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.667940] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.676150] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.684407] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.692174] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.699168] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.706150] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.713768] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.720544] RPC: Registered named UNIX socket transport module. <6>[ 0.726889] RPC: Registered udp transport module. <6>[ 0.731950] RPC: Registered tcp transport module. <6>[ 0.737019] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.746714] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <6>[ 0.755648] Unpacking initramfs... <5>[ 0.776159] Initialise system trusted keyrings <6>[ 0.781461] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <5>[ 1.134353] Key type asymmetric registered <5>[ 1.138862] Asymmetric key parser 'x509' registered <6>[ 1.155073] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 1.162916] io scheduler mq-deadline registered <6>[ 1.167871] io scheduler kyber registered <6>[ 1.195467] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes <6>[ 1.204550] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 1.237613] Console: switching to colour frame buffer device 82x26 <6>[ 1.254385] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 1.284207] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.309349] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.334816] usbcore: registered new interface driver zd1211rw <6>[ 1.341059] usbcore: registered new interface driver lan78xx <6>[ 1.354394] usbcore: registered new interface driver asix <6>[ 1.360276] usbcore: registered new interface driver ax88179_178a <6>[ 1.385051] usbcore: registered new interface driver cdc_ether <6>[ 1.391400] usbcore: registered new interface driver smsc95xx <6>[ 1.414993] usbcore: registered new interface driver net1080 <6>[ 1.421164] usbcore: registered new interface driver cdc_subset <6>[ 1.435063] usbcore: registered new interface driver zaurus <6>[ 1.441201] usbcore: registered new interface driver cdc_ncm <6>[ 1.464882] usbcore: registered new interface driver r8153_ecm <6>[ 1.471909] usbcore: registered new interface driver usb-storage <6>[ 1.484487] i2c_dev: i2c /dev entries driver <4>[ 1.505066] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.514980] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.522179] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.528787] sdhci: Copyright(c) Pierre Ossman <6>[ 1.555218] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.574555] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.581526] usbcore: registered new interface driver usbhid <6>[ 1.587540] usbhid: USB HID core driver <6>[ 1.605129] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.625955] NET: Registered PF_INET6 protocol family <6>[ 1.635355] Segment Routing with IPv6 <6>[ 1.639462] In-situ OAM (IOAM) with IPv6 <6>[ 1.643905] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.665801] NET: Registered PF_PACKET protocol family <5>[ 1.671834] Loading compiled-in X.509 certificates <6>[ 1.677102] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <6>[ 1.750364] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.760097] printk: console [ttyAMA0] enabled <6>[ 1.760097] printk: console [ttyAMA0] enabled <6>[ 1.769459] printk: bootconsole [pl11] disabled <6>[ 1.769459] printk: bootconsole [pl11] disabled <6>[ 1.814808] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <4>[ 1.826772] ------------[ cut here ]------------ <4>[ 1.831675] WARNING: CPU: 0 PID: 13 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xb0/0x374 <4>[ 1.840961] Modules linked in: <4>[ 1.844317] CPU: 0 PID: 13 Comm: kworker/u2:1 Tainted: G W 6.1.45-cip3 #1 <4>[ 1.852751] Hardware name: BCM2835 <4>[ 1.856413] Workqueue: events_unbound deferred_probe_work_func <4>[ 1.862531] unwind_backtrace from show_stack+0x18/0x1c <4>[ 1.868034] show_stack from dump_stack_lvl+0x24/0x2c <4>[ 1.873361] dump_stack_lvl from __warn+0x88/0xec <4>[ 1.878342] __warn from warn_slowpath_fmt+0x7c/0xb0 <4>[ 1.883584] warn_slowpath_fmt from dt_cpufreq_probe+0xb0/0x374 <4>[ 1.889779] dt_cpufreq_probe from platform_probe+0x60/0xb0 <4>[ 1.895630] platform_probe from really_probe+0x1a4/0x3b0 <4>[ 1.901300] really_probe from __driver_probe_device+0x1a8/0x1d8 <4>[ 1.907573] __driver_probe_device from driver_probe_device+0x34/0xb4 <4>[ 1.914279] driver_probe_device from __device_attach_driver+0xbc/0x108 <4>[ 1.921160] __device_attach_driver from bus_for_each_drv+0xa4/0xb8 <4>[ 1.927693] bus_for_each_drv from __device_attach+0xe4/0x174 <4>[ 1.933705] __device_attach from bus_probe_device+0x30/0x88 <4>[ 1.939630] bus_probe_device from device_add+0x54c/0x6c4 <4>[ 1.945293] device_add from platform_device_add+0x1b0/0x1ec <4>[ 1.951220] platform_device_add from platform_device_register_full+0xe8/0x120 <4>[ 1.958713] platform_device_register_full from raspberrypi_cpufreq_probe+0xf8/0x180 <4>[ 1.966729] raspberrypi_cpufreq_probe from platform_probe+0x60/0xb0 <4>[ 1.973354] platform_probe from really_probe+0x1a4/0x3b0 <4>[ 1.979023] really_probe from __driver_probe_device+0x1a8/0x1d8 <4>[ 1.985296] __driver_probe_device from driver_probe_device+0x34/0xb4 <4>[ 1.992003] driver_probe_device from __device_attach_driver+0xbc/0x108 <4>[ 1.998884] __device_attach_driver from bus_for_each_drv+0xa4/0xb8 <4>[ 2.005416] bus_for_each_drv from __device_attach+0xe4/0x174 <4>[ 2.011427] __device_attach from bus_probe_device+0x30/0x88 <4>[ 2.017353] bus_probe_device from device_add+0x54c/0x6c4 <4>[ 2.023014] device_add from platform_device_add+0x1b0/0x1ec <4>[ 2.028940] platform_device_add from platform_device_register_full+0xe8/0x120 <4>[ 2.036433] platform_device_register_full from raspberrypi_clk_probe+0x15c/0x39c <4>[ 2.044196] raspberrypi_clk_probe from platform_probe+0x60/0xb0 <4>[ 2.050474] platform_probe from really_probe+0x1a4/0x3b0 <4>[ 2.056142] really_probe from __driver_probe_device+0x1a8/0x1d8 <4>[ 2.062415] __driver_probe_device from driver_probe_device+0x34/0xb4 <4>[ 2.069122] driver_probe_device from __device_attach_driver+0xbc/0x108 <4>[ 2.076003] __device_attach_driver from bus_for_each_drv+0xa4/0xb8 <4>[ 2.082534] bus_for_each_drv from __device_attach+0xe4/0x174 <4>[ 2.088545] __device_attach from bus_probe_device+0x30/0x88 <4>[ 2.094470] bus_probe_device from device_add+0x54c/0x6c4 <4>[ 2.100132] device_add from platform_device_add+0x1b0/0x1ec <4>[ 2.106058] platform_device_add from platform_device_register_full+0xe8/0x120 <4>[ 2.113551] platform_device_register_full from rpi_firmware_probe+0x190/0x1d4 <4>[ 2.121051] rpi_firmware_probe from platform_probe+0x60/0xb0 <4>[ 2.127069] platform_probe from really_probe+0x1a4/0x3b0 <4>[ 2.132738] really_probe from __driver_probe_device+0x1a8/0x1d8 <4>[ 2.139012] __driver_probe_device from driver_probe_device+0x34/0xb4 <4>[ 2.145718] driver_probe_device from __device_attach_driver+0xbc/0x108 <4>[ 2.152600] __device_attach_driver from bus_for_each_drv+0xa4/0xb8 <4>[ 2.159131] bus_for_each_drv from __device_attach+0xe4/0x174 <4>[ 2.165143] __device_attach from bus_probe_device+0x30/0x88 <4>[ 2.171068] bus_probe_device from deferred_probe_work_func+0xa4/0xc8 <4>[ 2.177774] deferred_probe_work_func from process_one_work+0x174/0x22c <4>[ 2.184657] process_one_work from worker_thread+0x238/0x2c4 <4>[ 2.190580] worker_thread from kthread+0xb4/0xc0 <4>[ 2.195560] kthread from ret_from_fork+0x14/0x2c <4>[ 2.200535] Exception stack(0xf0845fb0 to 0xf0845ff8) <4>[ 2.205845] 5fa0: 00000000 00000000 00000000 00000000 <4>[ 2.214276] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.222703] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.229627] ---[ end trace 0000000000000000 ]--- <4>[ 2.240552] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 2.257281] mmc0: new high speed SDHC card at address 0002 <6>[ 2.275090] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 2.285662] mmcblk0: p1 <6>[ 2.567343] Freeing initrd memory: 9092K <4>[ 2.574727] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.582390] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.642769] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.647842] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.655291] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.662066] hub 1-0:1.0: USB hub found <6>[ 2.666197] hub 1-0:1.0: 1 port detected <4>[ 2.673248] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <6>[ 3.013866] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.264891] hub 1-1:1.0: USB hub found <6>[ 3.269012] hub 1-1:1.0: 5 ports detected <6>[ 3.593872] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 3.727157] smsc95xx v2.0.0 <6>[ 3.856825] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=94) <6>[ 3.867930] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 3.973881] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.109926] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.117595] scsi host0: usb-storage 1-1.3:1.0 <6>[ 4.788248] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 4.799189] smsc95xx 1-1.1:1.0 eth0: Link is Down <5>[ 5.233388] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <5>[ 5.583884] random: crng init done <6>[ 5.719508] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 5.727401] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 5.753869] Sending DHCP requests . <5>[ 6.174216] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 6.186187] sd 0:0:0:0: [sda] Write Protect is off <4>[ 6.191684] sd 0:0:0:0: [sda] No Caching mode page found <4>[ 6.197298] sd 0:0:0:0: [sda] Assuming drive cache: write through <6>[ 6.237378] sda: sda1 sda2 <5>[ 6.241265] sd 0:0:0:0: [sda] Attached SCSI removable disk <4>[ 8.713867] ., OK <6>[ 8.756077] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.14 <6>[ 8.764384] IP-Config: Complete: <6>[ 8.767882] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.201.14, mask=255.255.255.0, gw=192.168.201.1 <6>[ 8.778618] host=bcm2836-rpi-2-b-cbg-0, domain=lava-rack, nis-domain=(none) <6>[ 8.786301] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 8.786316] nameserver0=192.168.201.1 <5>[ 8.798499] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 8.829161] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 8.836459] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 8.845947] cfg80211: failed to load regulatory.db <6>[ 8.851048] ALSA device list: <6>[ 8.854439] No soundcards found. <6>[ 8.858457] uart-pl011 3f201000.serial: no DMA platform data <6>[ 8.871006] Freeing unused kernel image (initmem) memory: 1024K <6>[ 8.877551] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 9.108213] udevd[98]: starting version 3.2.9 <27>[ 9.127622] udevd[98]: specified user 'tss' unknown <27>[ 9.133144] udevd[98]: specified group 'tss' unknown <30>[ 9.144570] udevd[99]: starting eudev-3.2.9 <4>[ 9.509072] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <3>[ 9.634381] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 9.641150] vchiq: could not initialize vchiq platform <6>[ 10.673934] bcm2835-rng 3f104000.rng: hwrng registered done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-11336299/environment . /lava-11336299/environment / # /lava-11336299/bin/lava-test-runner /lava-11336299/0 /lava-11336299/bin/lava-test-runner /lava-11336299/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-11336299/0/tests/0_dmesg + cat uuid + UUID=11336299_1.5.<8>[ 11.476813] 2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 11.544306] <8>[ 11.605536] <8>[ 11.666789] + set +x <8>[ 11.677770] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-11336299/environment / # . /lava-11336299/environment/lava-11336299/bin/lava-test-runner /lava-11336299/1 / # /lava-11336299/bin/lava-test-runner /lava-11336299/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-11336299/1/tests/1_bootrr + cat uuid + UUID=11336299_1.5.<8>[ 12.208501] 2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-11336299/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 3f902000.hdmi 3f806000.vec 3fc00000.v3d /lava-11336299/1/../bin/lava-test-case <8>[ 13.293314] /lava-11336299/1/../bin/lava-test-case <8>[ 13.349472] /lava-11336299/1/../bin/lava-test-case <8>[ 13.383721] + set +x <8>[ 13.409069] / #