connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/998103/tftp-deploy-mghkih14/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/998103/tftp-deploy-mghkih14/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/998103/tftp-deploy-mghkih14/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/998103/tftp-deploy-mghkih14/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/998103/tftp-deploy-mghkih14/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/998103/tftp-deploy-mghkih14/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address b6:21:93:ff:7e:e2 T eth0: DHCP client bound to address 10.8.254.180 Loading ARM Linux zImage '/mnt/tftp/998103/tftp-deploy-mghkih14/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x131f2000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/998103/tftp-deploy-mghkih14/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x1905f591 Loading devicetree from '/mnt/tftp/998103/tftp-deploy-mghkih14/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x131f2000, initrd at 0x18000000, oftree at 0x19060000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.45-cip3 (KernelCI@build-j18755-arm-gcc-10-multi-v7-defconfig-6qjqz) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Aug 23 10:01:14 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1969720K/2097152K available (14336K kernel code, 2468K rwdata, 6256K rodata, 2048K init, 428K bss, 61896K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000019] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.004148] Console: colour dummy device 80x30 [ 0.004203] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.004217] CPU: Testing write buffer coherency: ok [ 0.004260] CPU0: Spectre v2: using BPIALL workaround [ 0.004270] pid_max: default: 32768 minimum: 301 [ 0.004453] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004480] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005460] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.006421] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.008121] rcu: Hierarchical SRCU implementation. [ 0.008127] rcu: Max phase no-delay instances is 1000. [ 0.011800] EFI services will not be available. [ 0.012177] smp: Bringing up secondary CPUs ... [ 0.013047] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.013064] CPU1: Spectre v2: using BPIALL workaround [ 0.014030] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.014047] CPU2: Spectre v2: using BPIALL workaround [ 0.014986] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.015004] CPU3: Spectre v2: using BPIALL workaround [ 0.015111] smp: Brought up 1 node, 4 CPUs [ 0.015124] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.015135] CPU: All CPU(s) started in SVC mode. [ 0.015803] devtmpfs: initialized [ 0.023225] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.023458] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.023480] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.026844] pinctrl core: initialized pinctrl subsystem [ 0.030560] DMI not present or invalid. [ 0.031371] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.034496] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.037258] thermal_sys: Registered thermal governor 'step_wise' [ 0.037342] cpuidle: using governor menu [ 0.037571] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.045685] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2800000 [ 0.045762] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 [ 0.066863] platform 21dc000.mipi: Fixed dependency cycle(s) with /soc/bus@2100000/i2c@21a4000/camera@3c [ 0.076928] No ATAGs? [ 0.077085] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.077097] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.080400] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.087567] Serial: AMBA PL011 UART driver [ 0.125743] iommu: Default domain type: Translated [ 0.125753] iommu: DMA domain TLB invalidation policy: strict mode [ 0.126570] SCSI subsystem initialized [ 0.127094] usbcore: registered new interface driver usbfs [ 0.127141] usbcore: registered new interface driver hub [ 0.127183] usbcore: registered new device driver usb [ 0.127426] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 0.127593] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 0.127754] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 0.127877] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 0.129585] i2c i2c-0: IMX I2C adapter registered [ 0.131228] i2c i2c-1: IMX I2C adapter registered [ 0.132386] i2c i2c-2: IMX I2C adapter registered [ 0.133848] pps_core: LinuxPPS API ver. 1 registered [ 0.133855] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.133876] PTP clock support registered [ 0.134158] EDAC MC: Ver: 3.0.0 [ 0.137743] vgaarb: loaded [ 1.317815] clocksource: Switched to clocksource mxc_timer1 [ 1.328901] NET: Registered PF_INET protocol family [ 1.329333] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.331304] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.331336] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.331354] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.331447] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 1.331722] TCP: Hash tables configured (established 8192 bind 8192) [ 1.331932] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.331986] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.332207] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.332933] RPC: Registered named UNIX socket transport module. [ 1.332943] RPC: Registered udp transport module. [ 1.332948] RPC: Registered tcp transport module. [ 1.332952] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.332962] PCI: CLS 0 bytes, default 64 [ 1.333658] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. [ 1.333962] Trying to unpack rootfs image as initramfs... [ 1.358797] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.361001] Initialise system trusted keyrings [ 1.361320] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.367329] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.368183] NFS: Registering the id_resolver key type [ 1.368241] Key type id_resolver registered [ 1.368247] Key type id_legacy registered [ 1.368350] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.368358] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.368394] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.368879] Key type asymmetric registered [ 1.368890] Asymmetric key parser 'x509' registered [ 1.369064] bounce: pool size: 64 pages [ 1.369198] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.369210] io scheduler mq-deadline registered [ 1.369217] io scheduler kyber registered [ 1.418884] mxs-dma 110000.dma-apbh: initialized [ 1.499917] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 1.505227] SuperH (H)SCI(F) driver initialized [ 1.506321] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 269, base_baud = 5000000) is a IMX [ 2.338742] printk: console [ttymxc0] enabled [ 2.344387] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 270, base_baud = 5000000) is a IMX [ 2.354738] msm_serial: driver initialized [ 2.358885] STMicroelectronics ASC driver initialized [ 2.365915] STM32 USART driver initialized [ 2.392947] brd: module loaded [ 2.403695] loop: module loaded [ 2.411085] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.419065] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.427085] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.435301] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.443088] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 2.450643] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 2.457974] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 2.468458] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.475461] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.484320] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.495960] scsi host0: ahci-imx [ 2.499678] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 271 [ 2.521581] CAN device driver interface [ 2.527362] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 2.537173] pps pps0: new PPS source ptp0 [ 2.839584] ata1: SATA link down (SStatus 0 SControl 300) [ 2.845097] ahci-imx 2200000.sata: no device found, disabling link. [ 2.846325] Freeing initrd memory: 16768K [ 2.851491] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 2.855736] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 2.873088] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware [ 2.895726] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.903149] e1000e: Intel(R) PRO/1000 Network Driver [ 2.908146] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.914138] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.919565] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.931803] pegasus: Pegasus/Pegasus II USB Ethernet driver [ 2.937431] usbcore: registered new interface driver pegasus [ 2.943176] usbcore: registered new interface driver asix [ 2.948635] usbcore: registered new interface driver ax88179_178a [ 2.954766] usbcore: registered new interface driver cdc_ether [ 2.960670] usbcore: registered new interface driver smsc75xx [ 2.966465] usbcore: registered new interface driver smsc95xx [ 2.972273] usbcore: registered new interface driver net1080 [ 2.977997] usbcore: registered new interface driver cdc_subset [ 2.983953] usbcore: registered new interface driver zaurus [ 2.989614] usbcore: registered new interface driver cdc_ncm [ 3.002039] usbcore: registered new interface driver usb-storage [ 3.016595] i2c_dev: i2c /dev entries driver [ 3.044543] sdhci: Secure Digital Host Controller Interface driver [ 3.050777] sdhci: Copyright(c) Pierre Ossman [ 3.058179] Synopsys Designware Multimedia Card Interface Driver [ 3.066749] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.078079] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 3.078424] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 3.088197] ledtrig-cpu: registered to indicate activity on CPUs [ 3.096386] usbcore: registered new interface driver usbhid [ 3.102014] usbhid: USB HID core driver [ 3.115818] NET: Registered PF_INET6 protocol family [ 3.119854] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 3.129315] Segment Routing with IPv6 [ 3.133052] In-situ OAM (IOAM) with IPv6 [ 3.137075] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.143699] NET: Registered PF_PACKET protocol family [ 3.148792] can: controller area network core [ 3.153225] NET: Registered PF_CAN protocol family [ 3.158054] can: raw protocol [ 3.159627] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 3.160370] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 3.161035] can: broadcast manager protocol [ 3.179000] can: netlink gateway - max_hops=1 [ 3.183751] Key type dns_resolver registered [ 3.190291] ThumbEE CPU extension supported. [ 3.194610] Registering SWP/SWPB emulation handler [ 3.200078] Loading compiled-in X.509 certificates [ 3.206118] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.216394] mmc0: new high speed SDHC card at address 1234 [ 3.223068] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.237428] imx_usb 2184200.usb: No over current polarity defined [ 3.247052] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 3.251999] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 3.269043] mmc2: new DDR MMC card at address 0001 [ 3.274891] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.282067] mmcblk2: p1 p2 [ 3.286022] mmcblk2boot0: mmc2:0001 S10004 4.00 MiB [ 3.291987] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 3.299168] mmcblk2boot1: mmc2:0001 S10004 4.00 MiB [ 3.305613] hub 1-0:1.0: USB hub found [ 3.309497] hub 1-0:1.0: 1 port detected [ 3.319839] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 3.330644] mmcblk2rpmb: mmc2:0001 S10004 4.00 MiB, chardev (236:0) [ 3.342374] Freeing unused kernel image (initmem) memory: 2048K [ 3.378756] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 3.530283] udevd[123]: starting version 3.2.9 [ 3.597643] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.811040] hub 1-1:1.0: USB hub found [ 3.815757] hub 1-1:1.0: 4 ports detected [ 8.657621] random: crng init done [ 8.668784] udevd[123]: specified user 'tss' unknown [ 8.673881] udevd[123]: specified group 'tss' unknown [ 8.681436] udevd[124]: starting eudev-3.2.9 [ 9.263542] imx-ipuv3 2400000.ipu: IPUv3H probed [ 9.271240] imx-ipuv3 2800000.ipu: IPUv3H probed [ 9.301855] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 9.338588] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 9.358803] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 9.365450] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 9.383970] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 9.397713] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 9.403853] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 9.438214] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 9.488490] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 9.502725] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 9.581127] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) [ 9.631555] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) [ 9.640097] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) [ 9.648537] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) [ 9.656809] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 9.688769] caam 2100000.crypto: Entropy delay = 3200 [ 9.754632] caam 2100000.crypto: Instantiated RNG4 SH0 [ 9.768325] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 9.776300] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 9.784695] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 9.815391] caam 2100000.crypto: Instantiated RNG4 SH1 [ 9.820607] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 9.827244] caam 2100000.crypto: job rings = 2, qi = 0 [ 9.968570] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 9.978479] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 10.072120] fsl-asoc-card sound: ASoC: driver name too long 'imx6-wandboard-sgtl5000' -> 'imx6-wandboard-' [ 10.326562] caam algorithms registered in /proc/crypto [ 10.333401] caam 2100000.crypto: registering rng-caam [ 10.339013] caam 2100000.crypto: rng crypto API alg registered prng-caam done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-998103/environment . /lava-998103/environment / # /lava-998103/bin/lava-test-runner /lava-998103/0 /lava-998103/bin/lava-test-runner /lava-998103/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-998103/0/tests/0_dmesg + cat uuid + UUID=998103_1.5.2.3.1 + [ 11.123581] set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 11.174503] [ 11.220149] [ 11.265767] + set[ 11.275663] +x / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-998103/environment / # . /lava-998103/environment/lava-998103/bin/lava-test-runner /lava-998103/1 / # /lava-998103/bin/lava-test-runner /lava-998103/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-998103/1/tests/1_bootrr + cat uuid + UUID=998103_1.5.2.3.5[ 11.784822] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-998103/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-998103/1/../bin/lava-test-case [ 11.859016] /lava-998103/1/../bin/lava-test-case [ 11.904560] /lava-998103/1/../bin/lava-test-case [ 11.932460] + set[ 11.952964] +x / #