connecting to NetworkSerialPort(target=Target(name='imx28-duckbill-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4014, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4014 connected to 10.8.254.5 (port 4014) Escape character: Ctrl-\ Type the escape character to get to the prompt. HTLLCLLC barebox 2020.05.0-00003-g4c4057edd6 #6 Fri May 29 14:12:02 CEST 2020 Board: I2SE Duckbill detected i.MX28 revision 1.2 mdio_bus: miibus0: probed eth0: got preset MAC address: 00:04:9f:06:00:04 mxs_mci 80010000.spi@80010000.of: registered as mci0 mci0: detected SD card version 2.0 mci0: registered disk0 malloc space: 0x43efdac0 -> 0x47dfb57f (size 63 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mI2SE Duckbill:/[0m bootm -v -r /mnt/tftp/998097/tftp-deploy-srj_8tlc/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/998097/tftp-deploy-srj_8tlc/dtb/imx28-duckbill.dtb /mnt/tftp/998097/tftp-deploy-srj_8tlc/kernel/zImage [1;32mbarebox@[1;36mI2SE Duckbill:/[0m bootm -v -r /mnt/tftp/998097/tftp-deploy-srj_8tlc/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/998097/tftp-deploy-srj_8tlc/dtb/imx28-duckbill.dtb /mnt/tftp/998097/tftp-deploy-srj_8tlc/kernel/zImage eth0: 100Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.53 Loading ARM Linux zImage '/mnt/tftp/998097/tftp-deploy-srj_8tlc/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x41ccd000 no initrd load address, defaulting to 0x42390000 Loaded initrd GZIP compressed '/mnt/tftp/998097/tftp-deploy-srj_8tlc/ramdisk/ramdisk.cpio.gz' initrd is at 0x42390000-0x42b70915 Loading devicetree from '/mnt/tftp/998097/tftp-deploy-srj_8tlc/dtb/imx28-duckbill.dtb' commandline: console=ttyAMA0,115200n8 Starting kernel at 0x41ccd000, initrd at 0x42390000, oftree at 0x42b71000... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.45-cip3 (KernelCI@build-j18733-arm-gcc-10-mxs-defconfig-jc87s) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Wed Aug 23 09:52:49 UTC 2023 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: I2SE Duckbill [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 102320K/131072K available (8404K kernel code, 1198K rwdata, 2836K rodata, 244K init, 6472K bss, 28752K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] Running RCU self tests [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: mxs_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000006] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.003343] Console: colour dummy device 80x30 [ 0.003628] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003674] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003714] ... MAX_LOCK_DEPTH: 48 [ 0.003749] ... MAX_LOCKDEP_KEYS: 8192 [ 0.003783] ... CLASSHASH_SIZE: 4096 [ 0.003814] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.003843] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.003872] ... CHAINHASH_SIZE: 32768 [ 0.003902] memory used by lock dependency info: 4061 kB [ 0.003931] memory used for stack traces: 2112 kB [ 0.003963] per task-struct memory footprint: 1536 bytes [ 0.004266] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496) [ 0.081529] CPU: Testing write buffer coherency: ok [ 0.082349] pid_max: default: 32768 minimum: 301 [ 0.084649] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.084766] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.111056] Setting up static identity map for 0x40008400 - 0x40008458 [ 0.122269] devtmpfs: initialized [ 0.203475] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.203751] futex hash table entries: 256 (order: 1, 12288 bytes, linear) [ 0.205338] pinctrl core: initialized pinctrl subsystem [ 0.227788] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.232065] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.478360] Serial: AMBA PL011 UART driver [ 0.484384] 80074000.serial: ttyAMA0 at MMIO 0x80074000 (irq = 182, base_baud = 0) is a PL011 rev2 [ 0.796960] printk: console [ttyAMA0] enabled [ 3.207805] SCSI subsystem initialized [ 3.216368] usbcore: registered new interface driver usbfs [ 3.223122] usbcore: registered new interface driver hub [ 3.229087] usbcore: registered new device driver usb [ 3.241093] pps_core: LinuxPPS API ver. 1 registered [ 3.246387] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.255982] PTP clock support registered [ 3.263908] Advanced Linux Sound Architecture Driver Initialized. [ 3.285221] clocksource: Switched to clocksource mxs_timer [ 3.448158] NET: Registered PF_INET protocol family [ 3.456017] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 3.469597] tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 5120 bytes, linear) [ 3.478445] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.486782] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 3.494745] TCP bind hash table entries: 1024 (order: 4, 81920 bytes, linear) [ 3.503201] TCP: Hash tables configured (established 1024 bind 1024) [ 3.511055] UDP hash table entries: 256 (order: 2, 24576 bytes, linear) [ 3.518451] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear) [ 3.527370] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.540600] RPC: Registered named UNIX socket transport module. [ 3.547217] RPC: Registered udp transport module. [ 3.552063] RPC: Registered tcp transport module. [ 3.557069] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.574098] Unpacking initramfs... [ 7.727075] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 8.011805] NFS: Registering the id_resolver key type [ 8.026828] Key type id_resolver registered [ 8.031500] Key type id_legacy registered [ 8.046335] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 8.071434] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 8.079563] io scheduler mq-deadline registered [ 8.084264] io scheduler kyber registered [ 8.195111] mxs-dma 80004000.dma-apbh: initialized [ 8.234101] mxs-dma 80024000.dma-apbx: initialized [ 8.262316] 8006a000.serial: ttyAPP0 at MMIO 0x8006a000 (irq = 184, base_baud = 1500000) is a 8006a000.serial [ 8.290091] mxs-auart 8006a000.serial: Found APPUART 3.1.0 [ 8.597431] Freeing initrd memory: 8068K [ 8.689954] usbcore: registered new interface driver asix [ 8.696205] usbcore: registered new interface driver ax88179_178a [ 8.702892] usbcore: registered new interface driver cdc_ether [ 8.709815] usbcore: registered new interface driver smsc95xx [ 8.716391] usbcore: registered new interface driver net1080 [ 8.722711] usbcore: registered new interface driver cdc_subset [ 8.729438] usbcore: registered new interface driver zaurus [ 8.736157] usbcore: registered new interface driver cdc_ncm [ 8.742475] usbcore: registered new interface driver r8153_ecm [ 8.749394] usbcore: registered new interface driver usb-storage [ 8.793610] stmp3xxx-rtc 80056000.rtc: registered as rtc0 [ 8.799757] stmp3xxx-rtc 80056000.rtc: setting system clock to 1970-01-01T00:00:18 UTC (18) [ 8.811438] i2c_dev: i2c /dev entries driver [ 8.827405] stmp3xxx_rtc_wdt stmp3xxx_rtc_wdt: initialized watchdog with heartbeat 19s [ 8.894928] usbcore: registered new interface driver usbhid [ 8.900916] usbhid: USB HID core driver [ 8.916194] mxs-mmc 80010000.spi: initialized [ 8.967398] mmc0: host does not support reading read-only switch, assuming write-enable [ 8.985931] NET: Registered PF_PACKET protocol family [ 8.991870] mmc0: new high speed SDHC card at address 1234 [ 8.998642] Key type dns_resolver registered [ 9.013473] registered taskstats version 1 [ 9.032966] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 9.142167] mmcblk0: p1 [ 9.307633] ALSA device list: [ 9.311216] No soundcards found. [ 9.322110] uart-pl011 80074000.serial: no DMA platform data [ 9.330144] Freeing unused kernel image (initmem) memory: 244K [ 9.336321] Kernel memory protection not selected by kernel config. [ 9.342739] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 10.659362] udevd[85]: starting version 3.2.9 [ 13.046861] random: crng init done [ 13.118723] udevd[85]: specified user 'tss' unknown [ 13.124789] udevd[85]: specified group 'tss' unknown [ 13.180345] udevd[86]: starting eudev-3.2.9 done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-998097/environment . /lava-998097/environment / # /lava-998097/bin/lava-test-runner /lava-998097/0 /lava-998097/bin/lava-test-runner /lava-998097/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-998097/0/tests/0_dmesg + cat uuid + UUID=998097_1.5.2.3.1 + set +x [ 21.139578] + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 21.486389] [ 21.788835] [ 22.168412] + set +x [ 22.188841] # / # #export SHELL=/bin/sh / # export SHELL=/bin/sh. /lava-998097/environment / # . /lava-998097/environment/lava-998097/bin/lava-test-runner /lava-998097/1 / # /lava-998097/bin/lava-test-runner /lava-998097/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-998097/1/tests/1_bootrr + cat uuid + UUID=998097_1.5.2.3.5 + set +x [ 23.127277] + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-998097/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-998097/1/../bin/lava-test-case [ 23.531627] /lava-998097/1/../bin/lava-test-case [ 23.811165] /lava-998097/1/../bin/lava-test-case [ 23.961854] + set +x [ 24.067662] / #