Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot 2016.03-imx_v2016.03_4.1.15_2.0.0_ga+g0ec2a01 (Nov 11 2016 - 03:13:54 -0600) CPU: Freescale i.MX7D rev1.3 996 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 24C Reset cause: POR Board: i.MX7D SABRESD RevA I2C: ready DRAM: 1 GiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 Display: TFT43AB (480x272) Video: 480x272x24 In: serial Out: serial Err: serial switch to partitions #0, OK mmc0 is current device Net: FEC0 Normal Boot Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => setenv ipaddr 172.16.1.16; setenv serverip 172.16.1.4; setenv ethact FEC0; setenv ethprime FEC setenv ipaddr 172.16.1.16; setenv serverip 172.16.1.4; setenv ethact FEC0; setenv ethprime FEC => setenv serverip 59.144.98.45 setenv serverip 59.144.98.45 => tftp ${loadaddr} 1251224/tftp-deploy-97nwcvh7/kernel/zImage tftp ${loadaddr} 1251224/tftp-deploy-97nwcvh7/kernel/zImage Using FEC0 device TFTP from server 59.144.98.45; our IP address is 172.16.1.16 Filename '1251224/tftp-deploy-97nwcvh7/kernel/zImage'. Load address: 0x80800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################ 932.6 KiB/s done Bytes transferred = 10478080 (9fe200 hex) => tftp ${initrd_addr} 1251224/tftp-deploy-97nwcvh7/ramdisk/ramdisk.cpio.gz.uboot tftp ${initrd_addr} 1251224/tftp-deploy-97nwcvh7/ramdisk/ramdisk.cpio.gz.uboot Using FEC0 device TFTP from server 59.144.98.45; our IP address is 172.16.1.16 Filename '1251224/tftp-deploy-97nwcvh7/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# 10.2 MiB/s done Bytes transferred = 17174179 (1060ea3 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp ${fdt_addr} 1251224/tftp-deploy-97nwcvh7/dtb/imx7d-sdb.dtb tftp ${fdt_addr} 1251224/tftp-deploy-97nwcvh7/dtb/imx7d-sdb.dtb Using FEC0 device TFTP from server 59.144.98.45; our IP address is 172.16.1.16 Filename '1251224/tftp-deploy-97nwcvh7/dtb/imx7d-sdb.dtb'. Load address: 0x83000000 Loading: *### 5.3 MiB/s done Bytes transferred = 38751 (975f hex) => setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz ${loadaddr} ${initrd_addr} ${fdt_addr} bootz ${loadaddr} ${initrd_addr} ${fdt_addr} Kernel image @ 0x80800000 [ 0x000000 - 0x9fe200 ] ## Loading init Ramdisk from Legacy Image at 83800000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17174115 Bytes = 16.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 8300c75e Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.52-cip5 (KernelCI@build-j44797-arm-gcc-10-multi-v7-defconfig-6nfq4) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Sep 13 17:11:13 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Freescale i.MX7 SabreSD Board [ 0.000000] earlycon: ec_imx6q0 at MMIO 0x30860000 (options '') [ 0.000000] printk: bootconsole [ec_imx6q0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000afffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x00000000b0000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 930532K/1048576K available (14336K kernel code, 2468K rwdata, 6256K rodata, 2048K init, 428K bss, 52508K reserved, 65536K cma-reserved, 196608K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns <6>[ 0.000002] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns <6>[ 0.008310] Switching to timer-based delay loop, resolution 125ns <6>[ 0.016063] Switching to timer-based delay loop, resolution 41ns <6>[ 0.020999] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.029134] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.043833] Console: colour dummy device 80x30 <6>[ 0.045763] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.056401] CPU: Testing write buffer coherency: ok <6>[ 0.061547] pid_max: default: 32768 minimum: 301 <6>[ 0.066659] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.074062] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.083217] CPU0: update cpu_capacity 1024 <6>[ 0.086482] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.093411] Setting up static identity map for 0x80300000 - 0x803000ac <6>[ 0.100801] rcu: Hierarchical SRCU implementation. <6>[ 0.104361] rcu: Max phase no-delay instances is 1000. <6>[ 0.113477] EFI services will not be available. <6>[ 0.115726] smp: Bringing up secondary CPUs ... <6>[ 0.121189] CPU1: update cpu_capacity 1024 <6>[ 0.121200] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.121358] smp: Brought up 1 node, 2 CPUs <6>[ 0.134943] SMP: Total of 2 processors activated (96.00 BogoMIPS). <6>[ 0.141432] CPU: All CPU(s) started in SVC mode. <6>[ 0.147027] devtmpfs: initialized <6>[ 0.158637] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.164043] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.173977] futex hash table entries: 512 (order: 3, 32768 bytes, linear) <6>[ 0.183688] pinctrl core: initialized pinctrl subsystem <6>[ 0.190546] DMI not present or invalid. <6>[ 0.192857] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.200179] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.208350] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.208444] cpuidle: using governor menu <6>[ 0.216769] No ATAGs? <6>[ 0.218740] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.226936] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.236182] Serial: AMBA PL011 UART driver <6>[ 0.246427] amba 30041000.funnel: Fixed dependency cycle(s) with /soc/funnel@30083000 <6>[ 0.251732] amba 30041000.funnel: Fixed dependency cycle(s) with /soc/etm@3007d000 <6>[ 0.259633] amba 30041000.funnel: Fixed dependency cycle(s) with /soc/etm@3007c000 <6>[ 0.268006] amba 30083000.funnel: Fixed dependency cycle(s) with /soc/etf@30084000 <6>[ 0.275676] platform replicator: Fixed dependency cycle(s) with /soc/etf@30084000 <6>[ 0.283476] platform replicator: Fixed dependency cycle(s) with /soc/etr@30086000 <6>[ 0.291235] platform replicator: Fixed dependency cycle(s) with /soc/tpiu@30087000 <6>[ 0.303248] imx7d-pinctrl 302c0000.pinctrl: initialized IMX pinctrl driver <6>[ 0.309058] imx7d-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver <6>[ 0.340679] platform 30730000.lcdif: Fixed dependency cycle(s) with /panel <6>[ 0.464445] iommu: Default domain type: Translated <6>[ 0.466763] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.474356] SCSI subsystem initialized <6>[ 0.478006] usbcore: registered new interface driver usbfs <6>[ 0.483170] usbcore: registered new interface driver hub <6>[ 0.488790] usbcore: registered new device driver usb <4>[ 0.494359] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator <4>[ 0.502229] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests <4>[ 0.510830] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator <4>[ 0.518653] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests <6>[ 0.529001] i2c i2c-0: IMX I2C adapter registered <6>[ 0.532660] i2c i2c-1: IMX I2C adapter registered <6>[ 0.537510] i2c i2c-2: IMX I2C adapter registered <6>[ 0.542668] i2c i2c-3: IMX I2C adapter registered <6>[ 0.548411] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.552184] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.561633] PTP clock support registered <6>[ 0.566137] EDAC MC: Ver: 3.0.0 <6>[ 0.572989] vgaarb: loaded <6>[ 1.708064] clocksource: Switched to clocksource arch_sys_counter <6>[ 1.724830] NET: Registered PF_INET protocol family <6>[ 1.727522] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 1.737790] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 1.743744] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 1.751740] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 1.759857] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 1.767535] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 1.774091] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.780880] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.788452] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 1.794937] RPC: Registered named UNIX socket transport module. <6>[ 1.800363] RPC: Registered udp transport module. <6>[ 1.805314] RPC: Registered tcp transport module. <6>[ 1.810320] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.817046] PCI: CLS 0 bytes, default 64 <6>[ 1.821854] Trying to unpack rootfs image as initramfs... <6>[ 1.828273] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 1.837246] Initialise system trusted keyrings <6>[ 1.840522] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.854485] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 1.858924] NFS: Registering the id_resolver key type <5>[ 1.863205] Key type id_resolver registered <5>[ 1.867566] Key type id_legacy registered <6>[ 1.872120] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 1.878907] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 1.886609] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 1.892028] Key type asymmetric registered <5>[ 1.895570] Asymmetric key parser 'x509' registered <6>[ 1.901070] bounce: pool size: 64 pages <6>[ 1.905035] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 1.912592] io scheduler mq-deadline registered <6>[ 1.917356] io scheduler kyber registered <6>[ 1.971749] mxs-dma 33000000.dma-apbh: initialized <6>[ 2.066852] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 2.076571] SuperH (H)SCI(F) driver initialized <3>[ 2.079685] clk: failed to reparent uart1_src to pll_sys_main_240m_clk: -16 <6>[ 2.086204] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 274, base_baud = 1500000) is a IMX <6>[ 2.095103] printk: console [ttymxc0] enabled <6>[ 2.095103] printk: console [ttymxc0] enabled <6>[ 2.104242] printk: bootconsole [ec_imx6q0] disabled <6>[ 2.104242] printk: bootconsole [ec_imx6q0] disabled <6>[ 2.116211] 30a80000.serial: ttymxc5 at MMIO 0x30a80000 (irq = 275, base_baud = 15000000) is a IMX <6>[ 2.128853] msm_serial: driver initialized <6>[ 2.133240] STMicroelectronics ASC driver initialized <6>[ 2.140591] STM32 USART driver initialized <6>[ 2.170362] brd: module loaded <6>[ 2.181029] loop: module loaded <6>[ 2.202874] CAN device driver interface <6>[ 2.209148] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 2.218867] pps pps0: new PPS source ptp0 <3>[ 2.225835] fec 30bf0000.ethernet: Invalid MAC address: 00:00:00:00:00:00 <6>[ 2.233083] fec 30bf0000.ethernet: Using random MAC address: 8e:04:2a:3a:9a:f1 <6>[ 3.271001] Freeing initrd memory: 16772K <4>[ 3.275922] imx-sdma 30bd0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2 <6>[ 3.286750] imx-sdma 30bd0000.dma-controller: external firmware not found, using ROM firmware <6>[ 4.495408] fec 30bf0000.ethernet eth0: registered PHC device 0 <6>[ 4.503052] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 4.508325] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 4.514593] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 4.520273] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 4.532359] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 4.538285] usbcore: registered new interface driver pegasus <6>[ 4.544271] usbcore: registered new interface driver asix <6>[ 4.550004] usbcore: registered new interface driver ax88179_178a <6>[ 4.556402] usbcore: registered new interface driver cdc_ether <6>[ 4.562566] usbcore: registered new interface driver smsc75xx <6>[ 4.568641] usbcore: registered new interface driver smsc95xx <6>[ 4.574700] usbcore: registered new interface driver net1080 <6>[ 4.580678] usbcore: registered new interface driver cdc_subset <6>[ 4.586906] usbcore: registered new interface driver zaurus <6>[ 4.592843] usbcore: registered new interface driver cdc_ncm <6>[ 4.605074] usbcore: registered new interface driver usb-storage <6>[ 4.619596] i2c_dev: i2c /dev entries driver <3>[ 4.645310] CPUidle arm: CPU 0 failed to init idle CPU ops <6>[ 4.652825] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.659305] sdhci: Copyright(c) Pierre Ossman <6>[ 4.666710] Synopsys Designware Multimedia Card Interface Driver <6>[ 4.675387] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 4.688247] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 4.688247] sdhci-esdhc-imx 30b40000.mmc: Got CD GPIO <6>[ 4.688286] sdhci-esdhc-imx 30b40000.mmc: Got WP GPIO <6>[ 4.697239] usbcore: registered new interface driver usbhid <6>[ 4.711073] usbhid: USB HID core driver <6>[ 4.724956] NET: Registered PF_INET6 protocol family <6>[ 4.733254] Segment Routing with IPv6 <6>[ 4.737270] In-situ OAM (IOAM) with IPv6 <6>[ 4.741615] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.748569] NET: Registered PF_PACKET protocol family <6>[ 4.753898] can: controller area network core <6>[ 4.758634] NET: Registered PF_CAN protocol family <6>[ 4.763710] can: raw protocol <6>[ 4.766949] can: broadcast manager protocol <6>[ 4.768499] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA <6>[ 4.771446] can: netlink gateway - max_hops=1 <6>[ 4.779313] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA <5>[ 4.784036] Key type dns_resolver registered <6>[ 4.795362] ThumbEE CPU extension supported. <5>[ 4.799937] Registering SWP/SWPB emulation handler <5>[ 4.805708] Loading compiled-in X.509 certificates <6>[ 4.829877] mmc0: new high speed SDHC card at address e624 <6>[ 4.837170] mmcblk0: mmc0:e624 SA16G 14.8 GiB <6>[ 4.846167] mmcblk0: p1 p2 <4>[ 4.866410] imx_usb 30b10000.usb: No over current polarity defined <6>[ 4.978582] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA <4>[ 4.991296] imx_usb 30b20000.usb: No over current polarity defined <6>[ 5.001533] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 5.006715] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 5.038036] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 5.044803] hub 1-0:1.0: USB hub found <6>[ 5.048967] hub 1-0:1.0: 1 port detected <6>[ 5.088927] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <3>[ 5.116847] fec 30bf0000.ethernet eth0: Unable to connect to phy <3>[ 5.125855] IP-Config: Failed to open eth0 <3>[ 5.130254] IP-Config: No network devices available <6>[ 5.166728] Freeing unused kernel image (initmem) memory: 2048K <6>[ 5.174400] Run /init as init process <6>[ 5.190980] mmc1: new ultra high speed SDR104 SDIO card at address 0001 Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 5.324590] udevd[134]: starting version 3.2.9 <5>[ 7.897979] random: crng init done <27>[ 7.911938] udevd[134]: specified user 'tss' unknown <27>[ 7.917434] udevd[134]: specified group 'tss' unknown <30>[ 7.925667] udevd[135]: starting eudev-3.2.9 <6>[ 9.841723] caam 30900000.crypto: Entropy delay = 3200 <6>[ 9.906597] caam 30900000.crypto: Instantiated RNG4 SH0 <6>[ 9.966007] caam 30900000.crypto: Instantiated RNG4 SH1 <6>[ 9.971545] caam 30900000.crypto: device ID = 0x0a16030000000000 (Era 8) <6>[ 9.978534] caam 30900000.crypto: job rings = 3, qi = 0 <5>[ 10.706016] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 11.046247] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 11.053482] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 11.062437] cfg80211: failed to load regulatory.db <6>[ 11.132794] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2 <4>[ 11.142015] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.fsl,imx7d-sdb.bin failed with error -2 <4>[ 11.168511] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.bin failed with error -2 <6>[ 11.381877] caam algorithms registered in /proc/crypto <6>[ 11.388918] caam 30900000.crypto: caam pkc algorithms registered in /proc/crypto <6>[ 11.396611] caam 30900000.crypto: registering rng-caam <6>[ 11.409269] caam 30900000.crypto: rng crypto API alg registered prng-caam done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export<3>[ 12.218312] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 SHELL=/bin/sh / # . /lava-1251224/environment . /lava-1251224/environment / # /lava-1251224/bin/lava-test-runner /lava-1251224/0 /lava-1251224/bin/lava-test-runner /lava-1251224/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1251224/0/tests/0_dmesg + cat uuid <8>[ 17.435305] + UUID=1251224_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 17.481638] <8>[ 17.524346] <8>[ 17.567350] + set<8>[ 17.577598] +x / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1251224/environment / # . /lava-1251224/environment/lava-1251224/bin/lava-test-runner /lava-1251224/1 / # /lava-1251224/bin/lava-test-runner /lava-1251224/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1251224/1/tests/1_bootrr + cat uuid + UUID=1251224_1.5.2.4.5 + set<8>[ 23.291603] +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1251224/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto sound fsl-asoc-card: snd_soc_register_card failed 30360000.anatop:tempmon imx_thermal: failed to register cpufreq cooling device 30360000.anatop:regulator-vdd1p0d platform: supplier 0-0008 not ready 30360000.anatop:regulator-vdd1p2 platform: supplier 0-0008 not ready regulator-lcd-3v3 platform: supplier spi4.0 not ready usbphynop3 backlight platform: supplier 30660000.pwm not ready imx-pgc-domain.0 imx-pgc: Failed to get domain's regulator imx-pgc-domain.1 imx-pgc: Failed to get domain's regulator imx-pgc-domain.2 imx-pgc: Failed to get domain's regulator panel platform: supplier regulator-lcd-3v3 not ready 30be0000.ethernet platform: supplier spi4.0 not ready 30730000.lcdif mxsfb: Cannot connect bridge /lava-1251224/1/../bin/lava-test-case <8>[ 24.357282] /lava-1251224/1/../bin/lava-test-case <8>[ 24.400394] /lava-1251224/1/../bin/lava-test-case <8>[ 24.427569] + set +x <8>[ 24.447617] / #