connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1000395/tftp-deploy-_croise7/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1000395/tftp-deploy-_croise7/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1000395/tftp-deploy-_croise7/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1000395/tftp-deploy-_croise7/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1000395/tftp-deploy-_croise7/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1000395/tftp-deploy-_croise7/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address ee:2d:0a:0f:99:bd T eth0: DHCP client bound to address 10.8.254.99 Loading ARM Linux zImage '/mnt/tftp/1000395/tftp-deploy-_croise7/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x131f7000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1000395/tftp-deploy-_croise7/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x1906043d Loading devicetree from '/mnt/tftp/1000395/tftp-deploy-_croise7/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x131f7000, initrd at 0x18000000, oftree at 0x19061000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.52-cip5 (KernelCI@build-j44797-arm-gcc-10-multi-v7-defconfig-6nfq4) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Sep 13 17:11:13 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1969716K/2097152K available (14336K kernel code, 2468K rwdata, 6256K rodata, 2048K init, 428K bss, 61900K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000021] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.004168] Console: colour dummy device 80x30 [ 0.004224] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.004239] CPU: Testing write buffer coherency: ok [ 0.004280] CPU0: Spectre v2: using BPIALL workaround [ 0.004290] pid_max: default: 32768 minimum: 301 [ 0.004477] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004501] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005487] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.006416] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.008142] rcu: Hierarchical SRCU implementation. [ 0.008148] rcu: Max phase no-delay instances is 1000. [ 0.011896] EFI services will not be available. [ 0.012281] smp: Bringing up secondary CPUs ... [ 0.013153] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.013170] CPU1: Spectre v2: using BPIALL workaround [ 0.014135] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.014152] CPU2: Spectre v2: using BPIALL workaround [ 0.015081] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.015097] CPU3: Spectre v2: using BPIALL workaround [ 0.015204] smp: Brought up 1 node, 4 CPUs [ 0.015217] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.015228] CPU: All CPU(s) started in SVC mode. [ 0.015901] devtmpfs: initialized [ 0.023453] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.023687] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.023709] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.027064] pinctrl core: initialized pinctrl subsystem [ 0.030805] DMI not present or invalid. [ 0.031616] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.034751] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.037527] thermal_sys: Registered thermal governor 'step_wise' [ 0.037595] cpuidle: using governor menu [ 0.037823] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.046049] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2800000 [ 0.046121] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 [ 0.067610] platform 21dc000.mipi: Fixed dependency cycle(s) with /soc/bus@2100000/i2c@21a4000/camera@3c [ 0.077764] No ATAGs? [ 0.077929] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.077941] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.081279] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.088533] Serial: AMBA PL011 UART driver [ 0.126110] iommu: Default domain type: Translated [ 0.126121] iommu: DMA domain TLB invalidation policy: strict mode [ 0.126946] SCSI subsystem initialized [ 0.127459] usbcore: registered new interface driver usbfs [ 0.127507] usbcore: registered new interface driver hub [ 0.127549] usbcore: registered new device driver usb [ 0.127793] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 0.127958] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 0.128115] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 0.128245] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 0.129950] i2c i2c-0: IMX I2C adapter registered [ 0.131612] i2c i2c-1: IMX I2C adapter registered [ 0.132783] i2c i2c-2: IMX I2C adapter registered [ 0.134262] pps_core: LinuxPPS API ver. 1 registered [ 0.134270] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.134290] PTP clock support registered [ 0.134545] EDAC MC: Ver: 3.0.0 [ 0.138161] vgaarb: loaded [ 1.294952] clocksource: Switched to clocksource mxc_timer1 [ 1.306164] NET: Registered PF_INET protocol family [ 1.306629] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.308590] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.308627] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.308645] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.308736] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 1.309018] TCP: Hash tables configured (established 8192 bind 8192) [ 1.309222] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.309270] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.309491] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.310237] RPC: Registered named UNIX socket transport module. [ 1.310247] RPC: Registered udp transport module. [ 1.310252] RPC: Registered tcp transport module. [ 1.310257] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.310269] PCI: CLS 0 bytes, default 64 [ 1.310964] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. [ 1.311228] Trying to unpack rootfs image as initramfs... [ 1.336194] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.338353] Initialise system trusted keyrings [ 1.338659] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.344646] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.345539] NFS: Registering the id_resolver key type [ 1.345595] Key type id_resolver registered [ 1.345601] Key type id_legacy registered [ 1.345702] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.345711] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.345746] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.346251] Key type asymmetric registered [ 1.346262] Asymmetric key parser 'x509' registered [ 1.346443] bounce: pool size: 64 pages [ 1.346570] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.346582] io scheduler mq-deadline registered [ 1.346591] io scheduler kyber registered [ 1.397650] mxs-dma 110000.dma-apbh: initialized [ 1.481597] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 1.487105] SuperH (H)SCI(F) driver initialized [ 1.488266] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 269, base_baud = 5000000) is a IMX [ 2.320964] printk: console [ttymxc0] enabled [ 2.326703] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 270, base_baud = 5000000) is a IMX [ 2.337374] msm_serial: driver initialized [ 2.341494] STMicroelectronics ASC driver initialized [ 2.348602] STM32 USART driver initialized [ 2.378030] brd: module loaded [ 2.388744] loop: module loaded [ 2.396281] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.404224] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.412292] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.420508] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.428288] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 2.435840] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 2.443147] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 2.453651] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.460697] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.469528] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.481096] scsi host0: ahci-imx [ 2.484812] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 271 [ 2.506970] CAN device driver interface [ 2.512699] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 2.522550] pps pps0: new PPS source ptp0 [ 2.816699] ata1: SATA link down (SStatus 0 SControl 300) [ 2.818370] Freeing initrd memory: 16772K [ 2.822191] ahci-imx 2200000.sata: no device found, disabling link. [ 2.826553] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 2.832483] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 2.842875] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware [ 2.866328] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.873711] e1000e: Intel(R) PRO/1000 Network Driver [ 2.878721] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.884735] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.890141] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.902341] pegasus: Pegasus/Pegasus II USB Ethernet driver [ 2.907996] usbcore: registered new interface driver pegasus [ 2.913714] usbcore: registered new interface driver asix [ 2.919172] usbcore: registered new interface driver ax88179_178a [ 2.925323] usbcore: registered new interface driver cdc_ether [ 2.931205] usbcore: registered new interface driver smsc75xx [ 2.937014] usbcore: registered new interface driver smsc95xx [ 2.942798] usbcore: registered new interface driver net1080 [ 2.948525] usbcore: registered new interface driver cdc_subset [ 2.954482] usbcore: registered new interface driver zaurus [ 2.960142] usbcore: registered new interface driver cdc_ncm [ 2.972652] usbcore: registered new interface driver usb-storage [ 2.987434] i2c_dev: i2c /dev entries driver [ 3.015606] sdhci: Secure Digital Host Controller Interface driver [ 3.021801] sdhci: Copyright(c) Pierre Ossman [ 3.029127] Synopsys Designware Multimedia Card Interface Driver [ 3.037766] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.045724] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 3.050901] ledtrig-cpu: registered to indicate activity on CPUs [ 3.051350] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 3.059015] usbcore: registered new interface driver usbhid [ 3.067545] usbhid: USB HID core driver [ 3.081706] NET: Registered PF_INET6 protocol family [ 3.088346] Segment Routing with IPv6 [ 3.092075] In-situ OAM (IOAM) with IPv6 [ 3.093601] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 3.096128] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.109565] NET: Registered PF_PACKET protocol family [ 3.114632] can: controller area network core [ 3.119101] NET: Registered PF_CAN protocol family [ 3.123904] can: raw protocol [ 3.126076] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 3.126907] can: broadcast manager protocol [ 3.133909] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 3.137968] can: netlink gateway - max_hops=1 [ 3.138356] Key type dns_resolver registered [ 3.155883] ThumbEE CPU extension supported. [ 3.160208] Registering SWP/SWPB emulation handler [ 3.165634] Loading compiled-in X.509 certificates [ 3.180835] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.191137] mmc0: new high speed SDHC card at address 1234 [ 3.197846] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.206999] imx_usb 2184200.usb: No over current polarity defined [ 3.216906] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 3.221826] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 3.242075] mmc2: new DDR MMC card at address 0001 [ 3.247927] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.254792] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 3.254911] mmcblk2: p1 p2 [ 3.261107] hub 1-0:1.0: USB hub found [ 3.264149] mmcblk2boot0: mmc2:0001 S10004 4.00 MiB [ 3.266860] hub 1-0:1.0: 1 port detected [ 3.274100] mmcblk2boot1: mmc2:0001 S10004 4.00 MiB [ 3.281079] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 3.282377] mmcblk2rpmb: mmc2:0001 S10004 4.00 MiB, chardev (236:0) [ 3.301805] Freeing unused kernel image (initmem) memory: 2048K [ 3.345867] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 3.488290] udevd[123]: starting version 3.2.9 [ 3.574766] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.787780] hub 1-1:1.0: USB hub found [ 3.792370] hub 1-1:1.0: 4 ports detected [ 6.124741] random: crng init done [ 6.135785] udevd[123]: specified user 'tss' unknown [ 6.140887] udevd[123]: specified group 'tss' unknown [ 6.148558] udevd[124]: starting eudev-3.2.9 [ 6.568951] imx-ipuv3 2400000.ipu: IPUv3H probed [ 6.576658] imx-ipuv3 2800000.ipu: IPUv3H probed [ 6.687216] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 6.724922] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 6.744951] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 6.751622] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 6.800948] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 6.804697] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 6.814878] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 6.821017] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 6.864852] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 6.876381] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 6.945889] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) [ 6.954310] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) [ 6.962796] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) [ 6.971192] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) [ 6.979499] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 7.028540] caam 2100000.crypto: Entropy delay = 3200 [ 7.065037] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 7.073036] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 7.082212] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 7.094402] caam 2100000.crypto: Instantiated RNG4 SH0 [ 7.155163] caam 2100000.crypto: Instantiated RNG4 SH1 [ 7.160332] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 7.166996] caam 2100000.crypto: job rings = 2, qi = 0 [ 7.219852] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 7.239206] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 7.410076] fsl-asoc-card sound: ASoC: driver name too long 'imx6-wandboard-sgtl5000' -> 'imx6-wandboard-' [ 7.617845] caam algorithms registered in /proc/crypto [ 7.624264] caam 2100000.crypto: registering rng-caam [ 7.629921] caam 2100000.crypto: rng crypto API alg registered prng-caam done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1000395/environment . /lava-1000395/environment / # /lava-1000395/bin/lava-test-runner /lava-1000395/0 /lava-1000395/bin/lava-test-runner /lava-1000395/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1000395/0/tests/0_dmesg + cat uuid + UUID=1000395_1.5.2.3.1 + set[ 8.376065] +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 8.427041] [ 8.472113] [ 8.516900] + set[ 8.526708] +x / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1000395/environment / # . /lava-1000395/environment/lava-1000395/bin/lava-test-runner /lava-1000395/1 / # /lava-1000395/bin/lava-test-runner /lava-1000395/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1000395/1/tests/1_bootrr + cat uuid [ 9.025660] + UUID=1000395_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1000395/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-1000395/1/../bin/lava-test-case [ 9.088337] /lava-1000395/1/../bin/lava-test-case [ 9.133371] /lava-1000395/1/../bin/lava-test-case [ 9.161120] + set[ 9.181659] +x / #