connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1023466/tftp-deploy-3nrzb7s9/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1023466/tftp-deploy-3nrzb7s9/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1023466/tftp-deploy-3nrzb7s9/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1023466/tftp-deploy-3nrzb7s9/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1023466/tftp-deploy-3nrzb7s9/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1023466/tftp-deploy-3nrzb7s9/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address a6:e3:05:db:7e:c8 T eth0: DHCP client bound to address 10.8.254.82 Loading ARM Linux zImage '/mnt/tftp/1023466/tftp-deploy-3nrzb7s9/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x13229000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1023466/tftp-deploy-3nrzb7s9/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x19060b78 Loading devicetree from '/mnt/tftp/1023466/tftp-deploy-3nrzb7s9/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x13229000, initrd at 0x18000000, oftree at 0x19061000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.75-cip14 (KernelCI@build-j96473-arm-gcc-10-multi-v7-defconfig-z8z2g) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Sat Feb 3 06:35:55 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1969716K/2097152K available (14336K kernel code, 2469K rwdata, 6208K rodata, 2048K init, 428K bss, 61900K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000020] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.004160] Console: colour dummy device 80x30 [ 0.004212] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.004227] CPU: Testing write buffer coherency: ok [ 0.004270] CPU0: Spectre v2: using BPIALL workaround [ 0.004280] pid_max: default: 32768 minimum: 301 [ 0.004466] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004490] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005472] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.006410] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.008141] rcu: Hierarchical SRCU implementation. [ 0.008147] rcu: Max phase no-delay instances is 1000. [ 0.011913] EFI services will not be available. [ 0.012280] smp: Bringing up secondary CPUs ... [ 0.013152] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.013169] CPU1: Spectre v2: using BPIALL workaround [ 0.014135] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.014150] CPU2: Spectre v2: using BPIALL workaround [ 0.015078] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.015096] CPU3: Spectre v2: using BPIALL workaround [ 0.015204] smp: Brought up 1 node, 4 CPUs [ 0.015217] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.015227] CPU: All CPU(s) started in SVC mode. [ 0.015898] devtmpfs: initialized [ 0.023703] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.023941] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.023964] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.027312] pinctrl core: initialized pinctrl subsystem [ 0.031128] DMI not present or invalid. [ 0.031934] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.035035] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.037785] thermal_sys: Registered thermal governor 'step_wise' [ 0.037854] cpuidle: using governor menu [ 0.038085] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.045061] platform soc: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000 [ 0.060534] platform 20e0000.pinctrl: Fixed dependency cycle(s) with /soc/bus@2000000/pinctrl@20e0000/imx6qdl-wandboard/hoggrp [ 0.066569] platform 21dc000.mipi: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu2_csi1_mux/port@0/endpoint [ 0.066626] platform 21dc000.mipi: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux/port@0/endpoint [ 0.069054] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@1/endpoint [ 0.069095] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@0/endpoint [ 0.069200] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2100000/mipi@21dc000/port@2/endpoint [ 0.069254] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux/port@2/endpoint [ 0.070703] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@3/endpoint [ 0.070827] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000/ports/port@2/endpoint [ 0.070903] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu2_csi1_mux/port@2/endpoint [ 0.070987] platform 2800000.ipu: Fixed dependency cycle(s) with /soc/bus@2100000/mipi@21dc000/port@3/endpoint [ 0.076490] No ATAGs? [ 0.076647] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.076659] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.080008] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.088122] Serial: AMBA PL011 UART driver [ 0.125829] iommu: Default domain type: Translated [ 0.125840] iommu: DMA domain TLB invalidation policy: strict mode [ 0.126650] SCSI subsystem initialized [ 0.127171] usbcore: registered new interface driver usbfs [ 0.127219] usbcore: registered new interface driver hub [ 0.127261] usbcore: registered new device driver usb [ 0.127509] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 0.127678] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 0.127832] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 0.127956] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 0.129649] i2c i2c-0: IMX I2C adapter registered [ 0.131052] i2c 1-003c: Fixed dependency cycle(s) with /soc/bus@2100000/mipi@21dc000/port@0/endpoint [ 0.131497] i2c i2c-1: IMX I2C adapter registered [ 0.132593] i2c i2c-2: IMX I2C adapter registered [ 0.134057] pps_core: LinuxPPS API ver. 1 registered [ 0.134067] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.134085] PTP clock support registered [ 0.134370] EDAC MC: Ver: 3.0.0 [ 0.138005] vgaarb: loaded [ 0.138570] clocksource: Switched to clocksource mxc_timer1 [ 0.149366] NET: Registered PF_INET protocol family [ 0.149761] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.151644] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.151674] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.151693] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.151776] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.152027] TCP: Hash tables configured (established 8192 bind 8192) [ 0.152193] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.152234] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.152427] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.153056] RPC: Registered named UNIX socket transport module. [ 0.153066] RPC: Registered udp transport module. [ 0.153071] RPC: Registered tcp transport module. [ 0.153075] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.153085] PCI: CLS 0 bytes, default 64 [ 0.153691] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. [ 0.153891] Trying to unpack rootfs image as initramfs... [ 0.163960] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.166017] Initialise system trusted keyrings [ 0.166358] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.172446] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.173280] NFS: Registering the id_resolver key type [ 0.173322] Key type id_resolver registered [ 0.173328] Key type id_legacy registered [ 0.173419] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.173429] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.173470] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.173959] Key type asymmetric registered [ 0.173969] Asymmetric key parser 'x509' registered [ 0.174133] bounce: pool size: 64 pages [ 0.174248] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.174259] io scheduler mq-deadline registered [ 0.174267] io scheduler kyber registered [ 0.233150] mxs-dma 110000.dma-apbh: initialized [ 0.314538] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 0.319997] SuperH (H)SCI(F) driver initialized [ 0.321060] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 269, base_baud = 5000000) is a IMX [ 1.262276] printk: console [ttymxc0] enabled [ 1.267897] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 270, base_baud = 5000000) is a IMX [ 1.278260] msm_serial: driver initialized [ 1.282415] STMicroelectronics ASC driver initialized [ 1.289519] STM32 USART driver initialized [ 1.316571] brd: module loaded [ 1.327417] loop: module loaded [ 1.334905] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 1.342898] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 1.350934] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 1.359160] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 1.366926] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 1.374544] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 1.381951] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 1.392584] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 1.399668] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.408482] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 1.419678] scsi host0: ahci-imx [ 1.423314] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 271 [ 1.444895] CAN device driver interface [ 1.450736] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.460588] pps pps0: new PPS source ptp0 [ 1.671577] Freeing initrd memory: 16772K [ 1.676074] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.686525] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware [ 1.715824] fec 2188000.ethernet eth0: registered PHC device 0 [ 1.723226] e1000e: Intel(R) PRO/1000 Network Driver [ 1.728201] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.734214] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.739635] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.751853] pegasus: Pegasus/Pegasus II USB Ethernet driver [ 1.757483] usbcore: registered new interface driver pegasus [ 1.760887] ata1: SATA link down (SStatus 0 SControl 300) [ 1.763226] usbcore: registered new interface driver asix [ 1.768613] ahci-imx 2200000.sata: no device found, disabling link. [ 1.774001] usbcore: registered new interface driver ax88179_178a [ 1.780244] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 1.786375] usbcore: registered new interface driver cdc_ether [ 1.799383] usbcore: registered new interface driver smsc75xx [ 1.805181] usbcore: registered new interface driver smsc95xx [ 1.810983] usbcore: registered new interface driver net1080 [ 1.816691] usbcore: registered new interface driver cdc_subset [ 1.822666] usbcore: registered new interface driver zaurus [ 1.828314] usbcore: registered new interface driver cdc_ncm [ 1.840773] usbcore: registered new interface driver usb-storage [ 1.855357] i2c_dev: i2c /dev entries driver [ 1.883349] sdhci: Secure Digital Host Controller Interface driver [ 1.889569] sdhci: Copyright(c) Pierre Ossman [ 1.896905] Synopsys Designware Multimedia Card Interface Driver [ 1.905502] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.912742] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 1.913011] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 1.922922] ledtrig-cpu: registered to indicate activity on CPUs [ 1.931094] usbcore: registered new interface driver usbhid [ 1.936681] usbhid: USB HID core driver [ 1.950589] NET: Registered PF_INET6 protocol family [ 1.954465] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 1.963851] Segment Routing with IPv6 [ 1.967595] In-situ OAM (IOAM) with IPv6 [ 1.971650] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.978237] NET: Registered PF_PACKET protocol family [ 1.983333] can: controller area network core [ 1.987772] NET: Registered PF_CAN protocol family [ 1.992599] can: raw protocol [ 1.993858] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 1.994651] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 1.995585] can: broadcast manager protocol [ 2.013558] can: netlink gateway - max_hops=1 [ 2.018310] Key type dns_resolver registered [ 2.024863] ThumbEE CPU extension supported. [ 2.029249] Registering SWP/SWPB emulation handler [ 2.034716] Loading compiled-in X.509 certificates [ 2.039738] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.049962] mmc0: new high speed SDHC card at address 1234 [ 2.056603] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 2.071339] imx_usb 2184200.usb: No over current polarity defined [ 2.081974] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.086885] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 2.103644] mmc2: new DDR MMC card at address 0001 [ 2.109564] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 2.116733] mmcblk2: p1 p2 [ 2.118597] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.120732] mmcblk2boot0: mmc2:0001 S10004 4.00 MiB [ 2.125853] hub 1-0:1.0: USB hub found [ 2.132252] mmcblk2boot1: mmc2:0001 S10004 4.00 MiB [ 2.133761] hub 1-0:1.0: 1 port detected [ 2.141754] mmcblk2rpmb: mmc2:0001 S10004 4.00 MiB, chardev (236:0) [ 2.149175] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 2.165326] Freeing unused kernel image (initmem) memory: 2048K [ 2.199043] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 2.348437] udevd[125]: starting version 3.2.9 [ 2.428549] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 2.641432] hub 1-1:1.0: USB hub found [ 2.646158] hub 1-1:1.0: 4 ports detected [ 4.958533] random: crng init done [ 4.969604] udevd[125]: specified user 'tss' unknown [ 4.974707] udevd[125]: specified group 'tss' unknown [ 4.982994] udevd[126]: starting eudev-3.2.9 [ 4.997444] usbcore: registered new device driver onboard-usb-hub [ 5.220916] hub 1-1:1.0: USB hub found [ 5.225614] hub 1-1:1.0: 4 ports detected [ 5.250427] hub 1-1:1.0: USB hub found [ 5.255065] hub 1-1:1.0: 4 ports detected [ 5.469698] imx-ipuv3 2400000.ipu: IPUv3H probed [ 5.476807] imx-ipuv3 2800000.ipu: IPUv3H probed [ 5.578674] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 5.585619] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 5.604246] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 5.610960] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 5.649079] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 5.658672] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 5.664796] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 5.698668] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 5.710986] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 5.818667] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 5.849217] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) [ 5.857625] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) [ 5.866116] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) [ 5.874504] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) [ 5.882793] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 5.960714] caam 2100000.crypto: Entropy delay = 3200 [ 6.026570] caam 2100000.crypto: Instantiated RNG4 SH0 [ 6.087337] caam 2100000.crypto: Instantiated RNG4 SH1 [ 6.092539] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 6.099200] caam 2100000.crypto: job rings = 2, qi = 0 [ 6.129040] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 6.136989] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 6.145200] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 6.185065] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 6.196174] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 6.303238] fsl-asoc-card sound: ASoC: driver name too long 'imx6-wandboard-sgtl5000' -> 'imx6-wandboard-' [ 6.491472] caam algorithms registered in /proc/crypto [ 6.498116] caam 2100000.crypto: registering rng-caam [ 6.509032] caam 2100000.crypto: rng crypto API alg registered prng-caam done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1023466/environment . /lava-1023466/environment / # /lava-1023466/bin/lava-test-runner /lava-1023466/0 /lava-1023466/bin/lava-test-runner /lava-1023466/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1023466/0/tests/0_dmesg + cat uuid + UUID=1023466_1.5.2.3.1 + set[ 7.289657] +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 7.341292] [ 7.386861] [ 7.432600] + set[ 7.442496] +x / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1023466/environment / # . /lava-1023466/environment/lava-1023466/bin/lava-test-runner /lava-1023466/1 / # /lava-1023466/bin/lava-test-runner /lava-1023466/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1023466/1/tests/1_bootrr + cat uuid [ 7.939968] + UUID=1023466_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1023466/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-1023466/1/../bin/lava-test-case [ 8.002142] /lava-1023466/1/../bin/lava-test-case [ 8.059472] /lava-1023466/1/../bin/lava-test-case [ 8.087237] + set[ 8.108221] +x / #