[Enter `^Ec?' for help] U-Boot SPL 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45) U-Boot 2015.10-00025-g943d444 (Feb 19 2016 - 15:04:45 +0000) Model: Radxa Rock 2 Square DRAM: 2 GiB MMC: dwmmc@ff0c0000: 0, dwmmc@ff0f0000: 1 In: serial@ff690000 Out: serial@ff690000 Err: serial@ff690000 Incorrect eeprom header Net: eth0: ethernet@ff290000 Hit any key to stop autoboot: 1  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp ethernet@ff290000 Waiting for PHY auto negotiation to complete...... done Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.22 (259 ms) => setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 => tftp 0x2000000 13420220/tftp-deploy-abe0vtz8/kernel/zImage tftp 0x2000000 13420220/tftp-deploy-abe0vtz8/kernel/zImage Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.22 Filename '13420220/tftp-deploy-abe0vtz8/kernel/zImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ### 3.6 MiB/s done Bytes transferred = 10527232 (a0a200 hex) => tftp 0x4000000 13420220/tftp-deploy-abe0vtz8/ramdisk/ramdisk.cpio.gz.uboot tftp 0x4000000 13420220/tftp-deploy-abe0vtz8/ramdisk/ramdisk.cpio.gz.uboot Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.22 Filename '13420220/tftp-deploy-abe0vtz8/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x4000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# # 3.6 MiB/s done Bytes transferred = 17178301 (1061ebd hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x1f00000 13420220/tftp-deploy-abe0vtz8/dtb/rk3288-rock2-square.dtb tftp 0x1f00000 13420220/tftp-deploy-abe0vtz8/dtb/rk3288-rock2-square.dtb Speed: 1000, full duplex Using ethernet@ff290000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.22 Filename '13420220/tftp-deploy-abe0vtz8/dtb/rk3288-rock2-square.dtb'. Load address: 0x1f00000 Loading: *### 2.8 MiB/s done Bytes transferred = 41716 (a2f4 hex) => setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x2000000 0x4000000 0x1f00000 bootz 0x2000000 0x4000000 0x1f00000 Kernel image @ 0x2000000 [ 0x000000 - 0xa0a200 ] ## Loading init Ramdisk from Legacy Image at 04000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17178237 Bytes = 16.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Using Device Tree in place at 01f00000, end 01f0d2f3 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x500 [ 0.000000] Linux version 6.1.86-cip19 (KernelCI@build-j170710-arm-gcc-10-multi-v7-defconfig-knqjc) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Apr 18 18:52:29 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Radxa Rock 2 Square [ 0.000000] earlycon: uart0 at MMIO32 0xff690000 (options '115200n8') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s34580 r8192 d22764 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 1970752K/2097152K available (14336K kernel code, 2470K rwdata, 6212K rodata, 2048K init, 427K bss, 60864K reserved, 65536K cma-reserved, 1245184K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns <6>[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns <6>[ 0.009083] Switching to timer-based delay loop, resolution 41ns <6>[ 0.023463] Console: colour dummy device 80x30 <6>[ 0.028683] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) <6>[ 0.040357] CPU: Testing write buffer coherency: ok <6>[ 0.046036] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.051881] pid_max: default: 32768 minimum: 301 <6>[ 0.057411] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.065752] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.075505] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500 <6>[ 0.083135] Setting up static identity map for 0x300000 - 0x3000ac <6>[ 0.092311] rcu: Hierarchical SRCU implementation. <6>[ 0.097857] rcu: Max phase no-delay instances is 1000. <6>[ 0.108791] EFI services will not be available. <6>[ 0.114421] smp: Bringing up secondary CPUs ... <6>[ 0.121499] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501 <6>[ 0.121518] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.135827] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502 <6>[ 0.135846] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.150093] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503 <6>[ 0.150112] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.162565] smp: Brought up 1 node, 4 CPUs <6>[ 0.167382] SMP: Total of 4 processors activated (192.00 BogoMIPS). <6>[ 0.174552] CPU: All CPU(s) started in SVC mode. <6>[ 0.180562] devtmpfs: initialized <6>[ 0.194407] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0 <6>[ 0.203370] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.214488] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.224296] pinctrl core: initialized pinctrl subsystem <6>[ 0.234257] DMI not present or invalid. <6>[ 0.239598] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.248745] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.259581] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.259649] cpuidle: using governor menu <6>[ 0.271807] No ATAGs? <6>[ 0.274728] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.283833] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.294000] Serial: AMBA PL011 UART driver <6>[ 0.322813] platform ff940000.vop: Fixed dependency cycle(s) with /hdmi@ff980000 <6>[ 0.331338] platform ff930000.vop: Fixed dependency cycle(s) with /hdmi@ff980000 <6>[ 0.339822] platform ff980000.hdmi: Fixed dependency cycle(s) with /vop@ff940000 <6>[ 0.348339] platform ff980000.hdmi: Fixed dependency cycle(s) with /vop@ff930000 <6>[ 0.372402] rockchip-gpio ff750000.gpio: probed /pinctrl/gpio@ff750000 <6>[ 0.380628] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000 <6>[ 0.388803] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000 <6>[ 0.397002] rockchip-gpio ff7a0000.gpio: probed /pinctrl/gpio@ff7a0000 <6>[ 0.405248] rockchip-gpio ff7b0000.gpio: probed /pinctrl/gpio@ff7b0000 <6>[ 0.413449] rockchip-gpio ff7c0000.gpio: probed /pinctrl/gpio@ff7c0000 <6>[ 0.421621] rockchip-gpio ff7d0000.gpio: probed /pinctrl/gpio@ff7d0000 <6>[ 0.429820] rockchip-gpio ff7e0000.gpio: probed /pinctrl/gpio@ff7e0000 <6>[ 0.437977] rockchip-gpio ff7f0000.gpio: probed /pinctrl/gpio@ff7f0000 <6>[ 0.477716] iommu: Default domain type: Translated <6>[ 0.483365] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.491460] SCSI subsystem initialized <6>[ 0.496369] usbcore: registered new interface driver usbfs <6>[ 0.502763] usbcore: registered new interface driver hub <6>[ 0.508923] usbcore: registered new device driver usb <6>[ 0.517394] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.523132] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.533482] PTP clock support registered <6>[ 0.538341] EDAC MC: Ver: 3.0.0 <6>[ 0.545827] vgaarb: loaded <6>[ 0.554740] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.574649] NET: Registered PF_INET protocol family <6>[ 0.580573] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.591357] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.600859] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.609674] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.618549] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 0.627155] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.634506] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.642121] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.650354] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.657470] RPC: Registered named UNIX socket transport module. <6>[ 0.664260] RPC: Registered udp transport module. <6>[ 0.669734] RPC: Registered tcp transport module. <6>[ 0.675196] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.682554] PCI: CLS 0 bytes, default 64 <6>[ 0.688417] Trying to unpack rootfs image as initramfs... <6>[ 0.699868] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available <5>[ 0.711028] Initialise system trusted keyrings <6>[ 0.716458] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 0.731136] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 0.738655] NFS: Registering the id_resolver key type <5>[ 0.744542] Key type id_resolver registered <5>[ 0.749472] Key type id_legacy registered <6>[ 0.754283] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.761964] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 0.770437] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 0.776106] Key type asymmetric registered <5>[ 0.780894] Asymmetric key parser 'x509' registered <6>[ 0.786735] bounce: pool size: 64 pages <6>[ 0.791358] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 0.799801] io scheduler mq-deadline registered <6>[ 0.805079] io scheduler kyber registered <6>[ 0.882506] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 0.891167] dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 <6>[ 0.916190] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330 <6>[ 0.924842] dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10 <6>[ 1.020041] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 1.030711] printk: console [ttyS2] disabled <6>[ 1.035795] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 47, base_baud = 1500000) is a 16550A <6>[ 1.046014] printk: console [ttyS2] enabled <6>[ 1.046014] printk: console [ttyS2] enabled <6>[ 1.056010] printk: bootconsole [uart0] disabled <6>[ 1.056010] printk: bootconsole [uart0] disabled <6>[ 1.070701] SuperH (H)SCI(F) driver initialized <6>[ 1.077871] msm_serial: driver initialized <6>[ 1.082758] STMicroelectronics ASC driver initialized <6>[ 1.090648] STM32 USART driver initialized <6>[ 1.121795] brd: module loaded <6>[ 1.132564] loop: module loaded <6>[ 1.154680] CAN device driver interface <6>[ 1.161382] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 1.170057] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 1.175922] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.182904] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 1.189256] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.203900] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 1.210507] usbcore: registered new interface driver pegasus <6>[ 1.217197] usbcore: registered new interface driver asix <6>[ 1.223574] usbcore: registered new interface driver ax88179_178a <6>[ 1.230747] usbcore: registered new interface driver cdc_ether <6>[ 1.237660] usbcore: registered new interface driver smsc75xx <6>[ 1.244444] usbcore: registered new interface driver smsc95xx <6>[ 1.251256] usbcore: registered new interface driver net1080 <6>[ 1.257946] usbcore: registered new interface driver cdc_subset <6>[ 1.264922] usbcore: registered new interface driver zaurus <6>[ 1.271533] usbcore: registered new interface driver cdc_ncm <4>[ 1.281654] dwc2 ff540000.usb: supply vusb_d not found, using dummy regulator <4>[ 1.290131] dwc2 ff540000.usb: supply vusb_a not found, using dummy regulator <6>[ 1.365565] dwc2 ff540000.usb: DWC OTG Controller <6>[ 1.371151] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1 <6>[ 1.379395] dwc2 ff540000.usb: irq 51, io mem 0xff540000 <6>[ 1.386540] hub 1-0:1.0: USB hub found <6>[ 1.391076] hub 1-0:1.0: 1 port detected <4>[ 1.396559] dwc2 ff580000.usb: supply vusb_d not found, using dummy regulator <4>[ 1.405027] dwc2 ff580000.usb: supply vusb_a not found, using dummy regulator <6>[ 1.554808] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM <6>[ 1.585073] dwc2 ff580000.usb: DWC OTG Controller <6>[ 1.590657] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2 <6>[ 1.598894] dwc2 ff580000.usb: irq 52, io mem 0xff580000 <6>[ 1.605965] hub 2-0:1.0: USB hub found <6>[ 1.610501] hub 2-0:1.0: 1 port detected <6>[ 1.617864] ehci-platform ff500000.usb: EHCI Host Controller <6>[ 1.620810] usbcore: registered new interface driver usb-storage <6>[ 1.624516] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3 <6>[ 1.640489] i2c_dev: i2c /dev entries driver <6>[ 1.650141] i2c 0-005a: Fixed dependency cycle(s) with /i2c@ff650000/act8846@5a/regulators/REG4 <6>[ 1.660317] i2c 0-005a: Fixed dependency cycle(s) with /i2c@ff650000/act8846@5a/regulators/REG2 <6>[ 1.674830] VDD_LOG: Bringing 1100000uV into 1000000-1000000uV <6>[ 1.693203] ehci-platform ff500000.usb: irq 53, io mem 0xff500000 <6>[ 1.708102] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! <6>[ 1.720791] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! <6>[ 1.724776] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00 <6>[ 1.745258] hub 3-0:1.0: USB hub found <6>[ 1.749806] hub 3-0:1.0: 1 port detected <4>[ 1.751500] dw_wdt ff800000.watchdog: No valid TOPs array specified <6>[ 1.772978] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 500000 KHz, changing to: 600000 KHz <6>[ 1.788437] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.795654] sdhci: Copyright(c) Pierre Ossman <6>[ 1.803587] Synopsys Designware Multimedia Card Interface Driver <6>[ 1.812024] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 1.813129] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.831670] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 1.839388] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 1.845953] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 1.857998] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.865916] usbcore: registered new interface driver usbhid <6>[ 1.872437] usbhid: USB HID core driver <6>[ 1.880487] NET: Registered PF_INET6 protocol family <6>[ 1.886863] Segment Routing with IPv6 <6>[ 1.891273] In-situ OAM (IOAM) with IPv6 <6>[ 1.896003] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.903217] NET: Registered PF_PACKET protocol family <6>[ 1.909184] can: controller area network core <6>[ 1.914389] NET: Registered PF_CAN protocol family <6>[ 1.920080] can: raw protocol <6>[ 1.923693] can: broadcast manager protocol <6>[ 1.928680] can: netlink gateway - max_hops=1 <5>[ 1.934056] Key type dns_resolver registered <6>[ 1.939198] ThumbEE CPU extension supported. <5>[ 1.944263] Registering SWP/SWPB emulation handler <5>[ 1.950280] Loading compiled-in X.509 certificates <6>[ 1.977007] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found <6>[ 1.984263] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock <6>[ 1.991881] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input). <6>[ 2.000081] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30). <6>[ 2.006727] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10). <6>[ 2.013209] Freeing initrd memory: 16776K <6>[ 2.013350] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no). <6>[ 2.025323] rk_gmac-dwmac ff290000.ethernet: clock input from PHY <6>[ 2.037426] rk_gmac-dwmac ff290000.ethernet: init for RGMII <6>[ 2.044088] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35 <6>[ 2.044727] usb 3-1: new high-speed USB device number 2 using ehci-platform <6>[ 2.052363] rk_gmac-dwmac ff290000.ethernet: DWMAC1000 <6>[ 2.066548] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported <6>[ 2.075204] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported <6>[ 2.083854] rk_gmac-dwmac ff290000.ethernet: COE Type 2 <6>[ 2.089982] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported <6>[ 2.098150] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported <6>[ 2.105676] rk_gmac-dwmac ff290000.ethernet: Normal descriptors <6>[ 2.112579] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled <6>[ 2.119381] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer <6>[ 2.256734] hub 3-1:1.0: USB hub found <6>[ 2.259185] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL) <6>[ 2.261500] hub 3-1:1.0: 4 ports detected <6>[ 2.272808] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL) <6>[ 2.280824] dwmmc_rockchip ff0c0000.mmc: IDMAC supports 32-bit address mode. <6>[ 2.283208] dwmmc_rockchip ff0f0000.mmc: IDMAC supports 32-bit address mode. <6>[ 2.284757] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 2.289754] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <6>[ 2.321749] dwmmc_rockchip ff0f0000.mmc: Using internal DMA controller. <6>[ 2.329476] dwmmc_rockchip ff0f0000.mmc: Version ID is 270a <6>[ 2.336046] dwmmc_rockchip ff0f0000.mmc: DW MMC controller at irq 63,32 bit host data width,256 deep fifo <6>[ 2.347246] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 2.347858] dwmmc_rockchip ff0f0000.mmc: allocated mmc-pwrseq <6>[ 2.354959] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 2.361660] mmc_host mmc0: card is non-removable. <6>[ 2.368190] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 2.384815] dwmmc_rockchip ff0c0000.mmc: Using internal DMA controller. <6>[ 2.389291] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 2.392511] dwmmc_rockchip ff0c0000.mmc: Version ID is 270a <6>[ 2.400722] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 2.407226] dwmmc_rockchip ff0c0000.mmc: DW MMC controller at irq 62,32 bit host data width,256 deep fifo <6>[ 2.428964] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 2.436678] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 2.443215] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 2.464172] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 2.472399] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 2.473960] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 2.480092] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 2.497208] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 2.512615] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 2.512754] rk_gmac-dwmac ff290000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 <6>[ 2.530499] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 2.531486] rk_gmac-dwmac ff290000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] (irq=POLL) <6>[ 2.538193] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 2.554757] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found <6>[ 2.556468] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 2.565210] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW <6>[ 2.578375] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) <6>[ 2.595269] rk_gmac-dwmac ff290000.ethernet eth0: configuring for phy/rgmii link mode <6>[ 2.596477] mmc0: new high speed MMC card at address 0001 <6>[ 2.611043] mmcblk0: mmc0:0001 032GE4 29.1 GiB <6>[ 2.619727] mmcblk0: p1 p2 <6>[ 2.623539] mmcblk0boot0: mmc0:0001 032GE4 4.00 MiB <6>[ 2.630290] mmcblk0boot1: mmc0:0001 032GE4 4.00 MiB <6>[ 2.636883] mmcblk0rpmb: mmc0:0001 032GE4 4.00 MiB, chardev (236:0) <6>[ 2.647022] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 2.655329] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 2.663020] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 2.669566] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 5.716092] rk_gmac-dwmac ff290000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <6>[ 5.726057] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 5.774731] Sending DHCP requests .., OK <6>[ 8.349702] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.22 <6>[ 8.359127] IP-Config: Complete: <6>[ 8.363064] device=eth0, hwaddr=4a:01:9c:e5:04:ff, ipaddr=192.168.201.22, mask=255.255.255.0, gw=192.168.201.1 <6>[ 8.375180] host=rk3288-rock2-square-cbg-0, domain=lava-rack, nis-domain=(none) <6>[ 8.384186] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 8.384233] nameserver0=192.168.201.1 <4>[ 8.401413] dw-apb-uart ff690000.serial: forbid DMA for kernel console <6>[ 8.414577] Freeing unused kernel image (initmem) memory: 2048K <6>[ 8.421669] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 8.480976] udevd[116]: starting version 3.2.9 <5>[ 8.487088] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 8.494963] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 8.502771] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 8.514174] udevd[116]: specified user 'tss' unknown <27>[ 8.520166] udevd[116]: specified group 'tss' unknown <30>[ 8.527256] udevd[117]: starting eudev-3.2.9 <6>[ 8.668665] rockchip-vop ff930000.vop: Adding to iommu group 0 <6>[ 8.685254] rockchip-vop ff940000.vop: Adding to iommu group 1 <6>[ 8.693259] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <6>[ 8.704128] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 8.711830] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 8.718383] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 8.734459] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 8.745520] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm]) <6>[ 8.757395] usbcore: registered new device driver onboard-usb-hub <4>[ 8.767188] dwhdmi-rockchip ff980000.hdmi: supply avdd-0v9 not found, using dummy regulator <6>[ 8.775661] dwmmc_rockchip ff0d0000.mmc: IDMAC supports 32-bit address mode. <4>[ 8.776956] dwhdmi-rockchip ff980000.hdmi: supply avdd-1v8 not found, using dummy regulator <6>[ 8.794763] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY) <6>[ 8.806301] rtc-hym8563 0-0051: registered as rtc0 <6>[ 8.806408] dwmmc_rockchip ff0d0000.mmc: Using internal DMA controller. <6>[ 8.812497] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm]) <6>[ 8.819677] dwmmc_rockchip ff0d0000.mmc: Version ID is 270a <6>[ 8.837125] dwmmc_rockchip ff0d0000.mmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo <6>[ 8.837126] rtc-hym8563 0-0051: setting system clock to 2024-04-18T19:05:44 UTC (1713467144) <6>[ 8.838302] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 <6>[ 8.867068] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 8.879732] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 8.888233] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 8.898469] dwmmc_rockchip ff0d0000.mmc: allocated mmc-pwrseq <6>[ 8.905211] mmc_host mmc2: card is non-removable. <6>[ 8.927365] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) <6>[ 8.953303] panfrost ffa30000.gpu: clock rate = 400000000 <6>[ 9.004497] panfrost ffa30000.gpu: mali-t760 id 0x750 major 0x0 minor 0x0 status 0x1 <6>[ 9.013471] panfrost ffa30000.gpu: features: 00000000,00000407, issues: 00000000,24040400 <6>[ 9.022923] panfrost ffa30000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 <6>[ 9.036444] panfrost ffa30000.gpu: shader_present=0xf l2_present=0x1 <6>[ 9.037201] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) <6>[ 9.063409] rk3288-crypto ff8a0000.crypto: will run requests pump with realtime priority <6>[ 9.074254] [drm] Initialized panfrost 1.2.0 20180908 for ffa30000.gpu on minor 1 <6>[ 9.074777] usb 3-1: reset high-speed USB device number 2 using ehci-platform <6>[ 9.092704] rk3288-crypto ff8a0000.crypto: Crypto Accelerator successfully registered <6>[ 9.094529] mmc2: new high speed SDIO card at address 0001 <5>[ 9.193368] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 9.233182] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <5>[ 9.242197] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' <4>[ 9.251616] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 9.261558] cfg80211: failed to load regulatory.db <6>[ 9.270428] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2 <4>[ 9.280377] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.radxa,rock2-square.bin failed with error -2 <4>[ 9.293350] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.bin failed with error -2 <6>[ 9.734947] onboard-usb-hub 3-1: reset high-speed USB device number 2 using ehci-platform <6>[ 9.947162] hub 3-1:1.0: USB hub found <6>[ 9.952223] hub 3-1:1.0: 4 ports detected <6>[ 9.960605] hub 3-1:1.0: USB hub found <6>[ 9.965455] hub 3-1:1.0: 4 ports detected done Saving random seed: <5>[ 9.994251] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: <3>[ 10.310952] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 <5>[ 22.814722] random: crng init done <5>[ 22.818814] random: 1 urandom warning(s) missed due to ratelimiting OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-13420220/environment . /lava-13420220/environment / # /lava-13420220/bin/lava-test-runner /lava-13420220/0 /lava-13420220/bin/lava-test-runner /lava-13420220/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-13420220/0/tests/0_dmesg + cat uuid <8>[ 23.399928] + UUID=13420220_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 23.434928] <8>[ 23.460475] <8>[ 23.485719] + set +x <8>[ 23.496140] / #