connecting to NetworkSerialPort(target=Target(name='imx28-duckbill-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4014, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4014 connected to 10.8.254.5 (port 4014) Escape character: Ctrl-\ Type the escape character to get to the prompt. HTLLCLLC barebox 2020.05.0-00003-g4c4057edd6 #6 Fri May 29 14:12:02 CEST 2020 Board: I2SE Duckbill detected i.MX28 revision 1.2 mdio_bus: miibus0: probed eth0: got preset MAC address: 00:04:9f:06:00:04 mxs_mci 80010000.spi@80010000.of: registered as mci0 mci0: detected SD card version 2.0 mci0: registered disk0 malloc space: 0x43efdac0 -> 0x47dfb57f (size 63 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mI2SE Duckbill:/[0m global linux.bootargs.console=\"console=ttyAMA0,115200n8 earlycon\" [1;32mbarebox@[1;36mI2SE Duckbill:/[0m global linux.bootargs.console=\"console=ttyAMA0,115200n8 earlycon\"global linux.bootargs.nfs=\"'root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/1048269/extract-nfsrootfs-vhrss6a6,v3,tcp ip=dhcp'\" [1;32mbarebox@[1;36mI2SE Duckbill:/[0m global linux.bootargs.nfs=\"'root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/1048269/extract-nfsrootfs-vhrss6a6,v3,tcp ip=dhcp'\"bootm -v -o /mnt/tftp/1048269/tftp-deploy-mc9vkhzs/dtb/imx28-duckbill.dtb /mnt/tftp/1048269/tftp-deploy-mc9vkhzs/kernel/zImage [1;32mbarebox@[1;36mI2SE Duckbill:/[0m bootm -v -o /mnt/tftp/1048269/tftp-deploy-mc9vkhzs/dtb/imx28-duckbill.dtb /mnt/tftp/1048269/tftp-deploy-mc9vkhzs/kernel/zImage eth0: 100Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.76 Loading ARM Linux zImage '/mnt/tftp/1048269/tftp-deploy-mc9vkhzs/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x41d01000 no initrd load address, defaulting to 0x423ce000 Loading devicetree from '/mnt/tftp/1048269/tftp-deploy-mc9vkhzs/dtb/imx28-duckbill.dtb' commandline: console=ttyAMA0,115200n8 earlycon root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/1048269/extract-nfsrootfs-vhrss6a6,v3,tcp ip=dhcp Starting kernel at 0x41d01000, oftree at 0x423ce000... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.91-cip21 (KernelCI@build-j216566-arm-gcc-10-mxs-defconfig-q5fqg) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Tue Jun 4 14:47:53 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: I2SE Duckbill [ 0.000000] Malformed early option 'earlycon' [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 earlycon root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/1048269/extract-nfsrootfs-vhrss6a6,v3,tcp ip=dhcp [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 110420K/131072K available (8430K kernel code, 1199K rwdata, 2776K rodata, 248K init, 6471K bss, 20652K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] Running RCU self tests [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: mxs_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.003344] Console: colour dummy device 80x30 [ 0.003627] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003677] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003720] ... MAX_LOCK_DEPTH: 48 [ 0.003756] ... MAX_LOCKDEP_KEYS: 8192 [ 0.003790] ... CLASSHASH_SIZE: 4096 [ 0.003821] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.003856] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.003889] ... CHAINHASH_SIZE: 32768 [ 0.003921] memory used by lock dependency info: 4061 kB [ 0.003955] memory used for stack traces: 2112 kB [ 0.003987] per task-struct memory footprint: 1536 bytes [ 0.004290] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496) [ 0.081579] CPU: Testing write buffer coherency: ok [ 0.082398] pid_max: default: 32768 minimum: 301 [ 0.084733] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.084860] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.110614] Setting up static identity map for 0x40008400 - 0x40008458 [ 0.121622] devtmpfs: initialized [ 0.200436] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.200695] futex hash table entries: 256 (order: 1, 12288 bytes, linear) [ 0.202306] pinctrl core: initialized pinctrl subsystem [ 0.224829] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.229340] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.284660] platform 80018000.pinctrl: Fixed dependency cycle(s) with /apb@80000000/apbh@80000000/pinctrl@80018000/hog@0 [ 0.478804] Serial: AMBA PL011 UART driver [ 0.485052] 80074000.serial: ttyAMA0 at MMIO 0x80074000 (irq = 182, base_baud = 0) is a PL011 rev2 [ 0.824230] printk: console [ttyAMA0] enabled [ 0.961635] SCSI subsystem initialized [ 0.980525] usbcore: registered new interface driver usbfs [ 0.998423] usbcore: registered new interface driver hub [ 1.004403] usbcore: registered new device driver usb [ 1.026442] pps_core: LinuxPPS API ver. 1 registered [ 1.031744] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.062530] PTP clock support registered [ 1.070206] Advanced Linux Sound Architecture Driver Initialized. [ 1.123788] clocksource: Switched to clocksource mxs_timer [ 1.385838] NET: Registered PF_INET protocol family [ 1.421323] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 1.434901] tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 5120 bytes, linear) [ 1.443533] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.480594] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.488832] TCP bind hash table entries: 1024 (order: 4, 81920 bytes, linear) [ 1.497316] TCP: Hash tables configured (established 1024 bind 1024) [ 1.515879] UDP hash table entries: 256 (order: 2, 24576 bytes, linear) [ 1.523026] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear) [ 1.581567] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.595106] RPC: Registered named UNIX socket transport module. [ 1.601486] RPC: Registered udp transport module. [ 1.606546] RPC: Registered tcp transport module. [ 1.611387] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.677535] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 4.806795] NFS: Registering the id_resolver key type [ 4.813181] Key type id_resolver registered [ 4.818249] Key type id_legacy registered [ 4.823139] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 4.837098] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.845290] io scheduler mq-deadline registered [ 4.850003] io scheduler kyber registered [ 4.903177] mxs-dma 80004000.dma-controller: initialized [ 4.927233] mxs-dma 80024000.dma-controller: initialized [ 4.939024] 8006a000.serial: ttyAPP0 at MMIO 0x8006a000 (irq = 184, base_baud = 1500000) is a 8006a000.serial [ 4.952297] mxs-auart 8006a000.serial: Found APPUART 3.1.0 [ 5.103024] usbcore: registered new interface driver asix [ 5.109395] usbcore: registered new interface driver ax88179_178a [ 5.116606] usbcore: registered new interface driver cdc_ether [ 5.123218] usbcore: registered new interface driver smsc95xx [ 5.129789] usbcore: registered new interface driver net1080 [ 5.136262] usbcore: registered new interface driver cdc_subset [ 5.142834] usbcore: registered new interface driver zaurus [ 5.149638] usbcore: registered new interface driver cdc_ncm [ 5.156114] usbcore: registered new interface driver r8153_ecm [ 5.162756] usbcore: registered new interface driver usb-storage [ 5.207238] stmp3xxx-rtc 80056000.rtc: registered as rtc0 [ 5.213172] stmp3xxx-rtc 80056000.rtc: setting system clock to 1970-01-01T00:00:12 UTC (12) [ 5.224822] i2c_dev: i2c /dev entries driver [ 5.240706] stmp3xxx_rtc_wdt stmp3xxx_rtc_wdt: initialized watchdog with heartbeat 19s [ 5.305365] usbcore: registered new interface driver usbhid [ 5.311082] usbhid: USB HID core driver [ 5.315814] mxs-mmc 80010000.spi: initialized [ 5.364914] mmc0: host does not support reading read-only switch, assuming write-enable [ 5.385918] mmc0: new high speed SDHC card at address 1234 [ 5.403291] NET: Registered PF_PACKET protocol family [ 5.423201] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 5.429360] Key type dns_resolver registered [ 5.437793] registered taskstats version 1 [ 5.520651] mmcblk0: p1 [ 5.795431] SMSC LAN8710/LAN8720 800f0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=800f0000.ethernet-1:00, irq=POLL) [ 7.896504] fec 800f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 7.934152] Sending DHCP requests ., OK [ 7.978096] IP-Config: Got DHCP answer from 10.8.254.2, my address is 10.8.254.76 [ 7.985927] IP-Config: Complete: [ 7.989264] device=eth0, hwaddr=00:04:9f:06:00:04, ipaddr=10.8.254.76, mask=255.255.255.0, gw=255.255.255.255 [ 7.999927] host=10.8.254.76, domain=, nis-domain=(none) [ 8.005970] bootserver=10.8.254.2, rootserver=10.8.254.2, rootpath= [ 8.006052] nameserver0=10.8.254.2 [ 8.029457] clk: Disabling unused clocks [ 8.034860] ALSA device list: [ 8.038416] No soundcards found. [ 8.048902] uart-pl011 80074000.serial: no DMA platform data [ 8.204204] VFS: Mounted root (nfs filesystem) on device 0:14. [ 8.217292] devtmpfs: mounted [ 8.222247] Freeing unused kernel image (initmem) memory: 248K [ 8.228446] Kernel memory protection not selected by kernel config. [ 8.235250] Run /sbin/init as init process [ 8.429633] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 8.437414] CPU: 0 PID: 1 Comm: init Not tainted 6.1.91-cip21 #1 [ 8.443524] Hardware name: Freescale MXS (Device Tree) [ 8.448746] unwind_backtrace from show_stack+0x10/0x14 [ 8.454149] show_stack from dump_stack_lvl+0x38/0x4c [ 8.459338] dump_stack_lvl from panic+0x114/0x340 [ 8.464265] panic from do_exit+0x948/0x984 [ 8.468573] do_exit from do_group_exit+0x3c/0x8c [ 8.473399] do_group_exit from get_signal+0xa84/0xb38 [ 8.478661] get_signal from do_work_pending+0x160/0x60c [ 8.484103] do_work_pending from slow_work_pending+0xc/0x24 [ 8.489889] Exception stack(0xc8819fb0 to 0xc8819ff8) [ 8.495037] 9fa0: bede7f10 00000000 00000000 00000000 [ 8.503311] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 0000da58 00000000 [ 8.511577] 9fe0: 00000000 bede7f10 b6ef6570 b6ef6bc0 00000030 ffffffff [ 8.518301] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 ]---