connecting to NetworkSerialPort(target=Target(name='imx28-duckbill-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4014, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4014 connected to 10.8.254.5 (port 4014) Escape character: Ctrl-\ Type the escape character to get to the prompt. HTLLCLLC barebox 2020.05.0-00003-g4c4057edd6 #6 Fri May 29 14:12:02 CEST 2020 Board: I2SE Duckbill detected i.MX28 revision 1.2 mdio_bus: miibus0: probed eth0: got preset MAC address: 00:04:9f:06:00:04 mxs_mci 80010000.spi@80010000.of: registered as mci0 mci0: detected SD card version 2.0 mci0: registered disk0 malloc space: 0x43efdac0 -> 0x47dfb57f (size 63 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mI2SE Duckbill:/[0m global linux.bootargs.console=\"console=ttyAMA0,115200n8 earlycon\" [1;32mbarebox@[1;36mI2SE Duckbill:/[0m global linux.bootargs.console=\"console=ttyAMA0,115200n8 earlycon\"global linux.bootargs.nfs=\"'root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/1048332/extract-nfsrootfs-hanm_y65,v3,tcp ip=dhcp'\" [1;32mbarebox@[1;36mI2SE Duckbill:/[0m global linux.bootargs.nfs=\"'root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/1048332/extract-nfsrootfs-hanm_y65,v3,tcp ip=dhcp'\"bootm -v -o /mnt/tftp/1048332/tftp-deploy-qgn0mfa2/dtb/imx28-duckbill.dtb /mnt/tftp/1048332/tftp-deploy-qgn0mfa2/kernel/zImage [1;32mbarebox@[1;36mI2SE Duckbill:/[0m bootm -v -o /mnt/tftp/1048332/tftp-deploy-qgn0mfa2/dtb/imx28-duckbill.dtb /mnt/tftp/1048332/tftp-deploy-qgn0mfa2/kernel/zImage eth0: 100Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.76 Loading ARM Linux zImage '/mnt/tftp/1048332/tftp-deploy-qgn0mfa2/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x41cff000 no initrd load address, defaulting to 0x423cc000 Loading devicetree from '/mnt/tftp/1048332/tftp-deploy-qgn0mfa2/dtb/imx28-duckbill.dtb' commandline: console=ttyAMA0,115200n8 earlycon root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/1048332/extract-nfsrootfs-hanm_y65,v3,tcp ip=dhcp Starting kernel at 0x41cff000, oftree at 0x423cc000... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.92-cip22 (KernelCI@build-j217090-arm-gcc-10-mxs-defconfig-8hlkx) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Tue Jun 4 23:27:15 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: I2SE Duckbill [ 0.000000] Malformed early option 'earlycon' [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 earlycon root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/1048332/extract-nfsrootfs-hanm_y65,v3,tcp ip=dhcp [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 110420K/131072K available (8431K kernel code, 1199K rwdata, 2776K rodata, 244K init, 6471K bss, 20652K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] Running RCU self tests [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: mxs_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.003391] Console: colour dummy device 80x30 [ 0.003677] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003723] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003764] ... MAX_LOCK_DEPTH: 48 [ 0.003797] ... MAX_LOCKDEP_KEYS: 8192 [ 0.003826] ... CLASSHASH_SIZE: 4096 [ 0.003855] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.003882] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.003909] ... CHAINHASH_SIZE: 32768 [ 0.003935] memory used by lock dependency info: 4061 kB [ 0.003963] memory used for stack traces: 2112 kB [ 0.003991] per task-struct memory footprint: 1536 bytes [ 0.004294] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496) [ 0.081606] CPU: Testing write buffer coherency: ok [ 0.082417] pid_max: default: 32768 minimum: 301 [ 0.084756] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.084881] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.110750] Setting up static identity map for 0x40008400 - 0x40008458 [ 0.121800] devtmpfs: initialized [ 0.196649] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.196909] futex hash table entries: 256 (order: 1, 12288 bytes, linear) [ 0.198508] pinctrl core: initialized pinctrl subsystem [ 0.220933] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.225608] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.280136] platform 80018000.pinctrl: Fixed dependency cycle(s) with /apb@80000000/apbh@80000000/pinctrl@80018000/hog@0 [ 0.468893] Serial: AMBA PL011 UART driver [ 0.475046] 80074000.serial: ttyAMA0 at MMIO 0x80074000 (irq = 182, base_baud = 0) is a PL011 rev2 [ 0.813919] printk: console [ttyAMA0] enabled [ 0.950537] SCSI subsystem initialized [ 0.969309] usbcore: registered new interface driver usbfs [ 0.975811] usbcore: registered new interface driver hub [ 1.002260] usbcore: registered new device driver usb [ 1.024494] pps_core: LinuxPPS API ver. 1 registered [ 1.029594] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.049998] PTP clock support registered [ 1.057551] Advanced Linux Sound Architecture Driver Initialized. [ 1.110624] clocksource: Switched to clocksource mxs_timer [ 1.373571] NET: Registered PF_INET protocol family [ 1.381495] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 1.422918] tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 5120 bytes, linear) [ 1.431779] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.439941] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.476799] TCP bind hash table entries: 1024 (order: 4, 81920 bytes, linear) [ 1.485309] TCP: Hash tables configured (established 1024 bind 1024) [ 1.503878] UDP hash table entries: 256 (order: 2, 24576 bytes, linear) [ 1.511285] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear) [ 1.519984] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.583069] RPC: Registered named UNIX socket transport module. [ 1.589447] RPC: Registered udp transport module. [ 1.594506] RPC: Registered tcp transport module. [ 1.599340] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.714756] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 4.842216] NFS: Registering the id_resolver key type [ 4.848604] Key type id_resolver registered [ 4.853658] Key type id_legacy registered [ 4.858556] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 4.872414] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.880316] io scheduler mq-deadline registered [ 4.885220] io scheduler kyber registered [ 4.937981] mxs-dma 80004000.dma-controller: initialized [ 4.961673] mxs-dma 80024000.dma-controller: initialized [ 4.973305] 8006a000.serial: ttyAPP0 at MMIO 0x8006a000 (irq = 184, base_baud = 1500000) is a 8006a000.serial [ 4.986510] mxs-auart 8006a000.serial: Found APPUART 3.1.0 [ 5.139574] usbcore: registered new interface driver asix [ 5.145928] usbcore: registered new interface driver ax88179_178a [ 5.152830] usbcore: registered new interface driver cdc_ether [ 5.159416] usbcore: registered new interface driver smsc95xx [ 5.166042] usbcore: registered new interface driver net1080 [ 5.172491] usbcore: registered new interface driver cdc_subset [ 5.179048] usbcore: registered new interface driver zaurus [ 5.185829] usbcore: registered new interface driver cdc_ncm [ 5.192275] usbcore: registered new interface driver r8153_ecm [ 5.198895] usbcore: registered new interface driver usb-storage [ 5.243204] stmp3xxx-rtc 80056000.rtc: registered as rtc0 [ 5.249127] stmp3xxx-rtc 80056000.rtc: setting system clock to 1970-01-01T00:00:12 UTC (12) [ 5.259802] i2c_dev: i2c /dev entries driver [ 5.276881] stmp3xxx_rtc_wdt stmp3xxx_rtc_wdt: initialized watchdog with heartbeat 19s [ 5.339793] usbcore: registered new interface driver usbhid [ 5.345798] usbhid: USB HID core driver [ 5.361557] mxs-mmc 80010000.spi: initialized [ 5.413372] mmc0: host does not support reading read-only switch, assuming write-enable [ 5.427593] NET: Registered PF_PACKET protocol family [ 5.434143] Key type dns_resolver registered [ 5.439516] mmc0: new high speed SDHC card at address 1234 [ 5.449211] registered taskstats version 1 [ 5.491074] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 5.587484] mmcblk0: p1 [ 5.832298] SMSC LAN8710/LAN8720 800f0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=800f0000.ethernet-1:00, irq=POLL) [ 8.943275] fec 800f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 8.990959] Sending DHCP requests ., OK [ 9.054940] IP-Config: Got DHCP answer from 10.8.254.2, my address is 10.8.254.76 [ 9.062832] IP-Config: Complete: [ 9.066176] device=eth0, hwaddr=00:04:9f:06:00:04, ipaddr=10.8.254.76, mask=255.255.255.0, gw=255.255.255.255 [ 9.076833] host=10.8.254.76, domain=, nis-domain=(none) [ 9.082876] bootserver=10.8.254.2, rootserver=10.8.254.2, rootpath= [ 9.082958] nameserver0=10.8.254.2 [ 9.106331] clk: Disabling unused clocks [ 9.111731] ALSA device list: [ 9.115287] No soundcards found. [ 9.125694] uart-pl011 80074000.serial: no DMA platform data [ 9.274768] VFS: Mounted root (nfs filesystem) on device 0:14. [ 9.288028] devtmpfs: mounted [ 9.293440] Freeing unused kernel image (initmem) memory: 244K [ 9.299424] Kernel memory protection not selected by kernel config. [ 9.306023] Run /sbin/init as init process [ 9.497979] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 9.505757] CPU: 0 PID: 1 Comm: init Not tainted 6.1.92-cip22 #1 [ 9.511859] Hardware name: Freescale MXS (Device Tree) [ 9.517073] unwind_backtrace from show_stack+0x10/0x14 [ 9.522471] show_stack from dump_stack_lvl+0x38/0x4c [ 9.527655] dump_stack_lvl from panic+0x114/0x340 [ 9.532569] panic from do_exit+0x948/0x984 [ 9.536867] do_exit from do_group_exit+0x3c/0x8c [ 9.541686] do_group_exit from get_signal+0xa84/0xb38 [ 9.546940] get_signal from do_work_pending+0x160/0x60c [ 9.552373] do_work_pending from slow_work_pending+0xc/0x24 [ 9.558149] Exception stack(0xc8819fb0 to 0xc8819ff8) [ 9.563290] 9fa0: bededf10 00000000 00000000 00000000 [ 9.571555] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 0000da58 00000000 [ 9.579812] 9fe0: 00000000 bededf10 b6fed570 b6fedbc0 00000030 ffffffff [ 9.586532] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 ]---