Trying 192.168.56.22... Connected to conserv3. Escape character is '^]'. ser2net port telnet,3001 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.2.4:1.0-port0, 115200n81, local=false [] (Debian GNU/Linux) U-Boot SPL 2023.01-rc4-00047-g3089d12a02 (Jan 01 2023 - 22:23:32 +0000) Trying to boot from MMC1 U-Boot 2023.01-rc4-00047-g3089d12a02 (Jan 01 2023 - 22:23:32 +0000) CPU : AM335X-GP rev 2.0 Model: TI AM335x BeagleBone Black DRAM: 512 MiB Core: 160 devices, 18 uclasses, devicetree: separate WDT: Started wdt@44e35000 with servicing every 1000ms (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 42 *** Unhandled DHCP Option in OFFER/ACK: 42 DHCP client bound to address 192.168.56.218 (123 ms) => setenv serverip 192.168.56.18 setenv serverip 192.168.56.18 => tftp 0x82000000 555660/tftp-deploy-030x4nwa/kernel/zImage tftp 0x82000000 555660/tftp-deploy-030x4nwa/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.56.18; our IP address is 192.168.56.218 Filename '555660/tftp-deploy-030x4nwa/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 4.8 MiB 4.7 MiB/s done Bytes transferred = 5031704 (4cc718 hex) => tftp 0x83000000 555660/tftp-deploy-030x4nwa/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 555660/tftp-deploy-030x4nwa/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.56.18; our IP address is 192.168.56.218 Filename '555660/tftp-deploy-030x4nwa/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 14.7 MiB 4.6 MiB/s done Bytes transferred = 15364138 (ea702a hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 555660/tftp-deploy-030x4nwa/dtb/am335x-boneblack.dtb tftp 0x88000000 555660/tftp-deploy-030x4nwa/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.56.18; our IP address is 192.168.56.218 Filename '555660/tftp-deploy-030x4nwa/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 68.3 KiB 4.4 MiB/s done Bytes transferred = 69970 (11152 hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x4cc718 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2024-07-18 13:15:00 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 15364074 Bytes = 14.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Working FDT set to 88000000 Using Device Tree in place at 88000000, end 88014151 Working FDT set to 88000000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.96-cip24 (KernelCI@build-j273023-arm-gcc-12-omap2plus-defconfig-57ffj) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Jul 18 12:59:14 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.0 (sgx neon) [ 0.000000] percpu: Embedded 16 pages/cpu s34196 r8192 d23148 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] Memory: 469780K/522240K available (10240K kernel code, 1088K rwdata, 2444K rodata, 1024K init, 251K bss, 36076K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008339] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018583] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030369] Console: colour dummy device 80x30 <3>[ 0.035256] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042339] This ensures that you still see kernel messages. Please <3>[ 0.049071] update your kernel commandline. <6>[ 0.053682] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095593] CPU: Testing write buffer coherency: ok <6>[ 0.100982] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106450] pid_max: default: 32768 minimum: 301 <6>[ 0.111599] LSM: Security Framework initializing <6>[ 0.116800] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.124638] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.134511] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.141338] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.148597] rcu: Hierarchical SRCU implementation. <6>[ 0.153855] rcu: Max phase no-delay instances is 1000. <6>[ 0.160213] smp: Bringing up secondary CPUs ... <6>[ 0.165153] smp: Brought up 1 node, 1 CPU <6>[ 0.169603] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.176322] CPU: All CPU(s) started in SVC mode. <6>[ 0.182181] devtmpfs: initialized <6>[ 0.199929] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.208405] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.218941] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.227557] pinctrl core: initialized pinctrl subsystem <6>[ 0.235361] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.244632] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.252649] audit: initializing netlink subsys (disabled) <6>[ 0.259748] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.259768] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.266312] thermal_sys: Registered thermal governor 'user_space' <5>[ 0.272922] audit: type=2000 audit(0.230:1): state=initialized audit_enabled=0 res=1 <6>[ 0.287791] cpuidle: using governor menu <6>[ 0.311114] No ATAGs? <6>[ 0.313750] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 0.328532] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.353208] iommu: Default domain type: Translated <6>[ 0.358513] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.366732] SCSI subsystem initialized <6>[ 0.389340] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.394724] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.404466] PTP clock support registered <6>[ 0.444428] vgaarb: loaded <6>[ 0.447837] clocksource: Switched to clocksource dmtimer <5>[ 0.454261] VFS: Disk quotas dquot_6.6.0 <6>[ 0.458727] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 0.500350] NET: Registered PF_INET protocol family <6>[ 0.505973] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.515126] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.524080] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.532363] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 0.540659] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) <6>[ 0.548384] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 0.555316] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 0.562357] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 0.569993] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.658837] RPC: Registered named UNIX socket transport module. <6>[ 0.665223] RPC: Registered udp transport module. <6>[ 0.670392] RPC: Registered tcp transport module. <6>[ 0.675499] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.682427] PCI: CLS 0 bytes, default 64 <5>[ 0.688271] Initialise system trusted keyrings <6>[ 0.693961] Trying to unpack rootfs image as initramfs... <6>[ 0.783184] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 0.819095] NFS: Registering the id_resolver key type <5>[ 0.824671] Key type id_resolver registered <5>[ 0.829344] Key type id_legacy registered <6>[ 0.833804] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 0.878633] Key type asymmetric registered <5>[ 0.883162] Asymmetric key parser 'x509' registered <6>[ 0.888628] io scheduler mq-deadline registered <6>[ 0.893564] io scheduler kyber registered <6>[ 0.958839] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <6>[ 1.025107] brd: module loaded <6>[ 1.068681] loop: module loaded <3>[ 1.073105] mtdoops: mtd device (mtddev=name/number) must be supplied <6>[ 1.082643] i2c_dev: i2c /dev entries driver <5>[ 1.088271] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 1.095851] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.102556] sdhci: Copyright(c) Pierre Ossman <6>[ 1.107484] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.238783] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.246208] Initializing XFRM netlink socket <6>[ 1.251194] NET: Registered PF_INET6 protocol family <6>[ 1.313653] Segment Routing with IPv6 <6>[ 1.317781] In-situ OAM (IOAM) with IPv6 <6>[ 1.322329] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.329631] NET: Registered PF_PACKET protocol family <6>[ 1.335129] NET: Registered PF_KEY protocol family <5>[ 1.340526] Key type dns_resolver registered <6>[ 1.345288] ThumbEE CPU extension supported. <5>[ 1.350003] Registering SWP/SWPB emulation handler <3>[ 1.355634] omap_voltage_late_init: Voltage driver support not added <6>[ 1.362853] SmartReflex Class3 initialized <5>[ 1.479031] Loading compiled-in X.509 certificates <6>[ 1.592391] platform 44e10800.pinmux: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@10000/scm@0/pinmux@800/pinmux_clkout2_pin <6>[ 1.608686] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <4>[ 1.619323] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 1.719690] ti-sysc: probe of 48040000.target-module failed with error -16 <4>[ 1.736874] gpio gpiochip0: (gpio-0-31): not an immutable chip, please consider fixing it! <6>[ 1.828687] OMAP GPIO hardware version 0.1 <6>[ 1.869921] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <4>[ 1.881177] gpio gpiochip1: (gpio-32-63): not an immutable chip, please consider fixing it! <4>[ 1.981460] gpio gpiochip2: (gpio-64-95): not an immutable chip, please consider fixing it! <6>[ 2.007139] platform 4830e000.lcdc: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <4>[ 2.030413] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 2.049107] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 2.088201] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 2.752264] Freeing initrd memory: 15008K <6>[ 2.794711] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 2.804838] cpsw-switch 4a100000.switch: initialized cpsw ale version 1.4 <6>[ 2.812160] cpsw-switch 4a100000.switch: ALE Table size 1024 <6>[ 2.818459] cpsw-switch 4a100000.switch: cpts: overflow check period 500 (jiffies) <6>[ 2.826528] cpsw-switch 4a100000.switch: CPTS: ref_clk_freq:250000000 calc_mult:2147483648 calc_shift:29 error:0 nsec/sec <6>[ 2.838245] cpsw-switch 4a100000.switch: Detected MACID = c8:a0:30:c2:c5:7d <5>[ 2.847287] cpsw-switch 4a100000.switch: initialized (regs 0x4a100000, pool size 256) hw_ver:0019010C 1.12 (0) <3>[ 2.867147] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 2.875768] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 2.899424] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <4>[ 2.910178] gpio gpiochip3: (gpio-96-127): not an immutable chip, please consider fixing it! <3>[ 2.924533] l3-aon-clkctrl:0000:0: failed to disable <6>[ 2.932453] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 34, base_baud = 3000000) is a 8250 <6>[ 2.941912] printk: console [ttyS0] enabled <6>[ 2.941912] printk: console [ttyS0] enabled <6>[ 2.951005] printk: bootconsole [omap8250] disabled <6>[ 2.951005] printk: bootconsole [omap8250] disabled <4>[ 2.988667] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 3.002619] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 3.011426] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 3.017593] platform 4830e000.lcdc: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <6>[ 3.031236] i2c 0-0070: Fixed dependency cycle(s) with /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 <6>[ 3.042851] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 3.050647] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 3.059787] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 3.065007] sdhci-omap 48060000.mmc: supply pbias not found, using dummy regulator <4>[ 3.076874] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <4>[ 3.085632] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 3.094044] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 3.129869] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <6>[ 3.138977] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 3.147994] cpsw-switch 4a100000.switch: starting ndev. mode: dual_mac <6>[ 3.191526] mmc0: new high speed SDHC card at address 0001 <6>[ 3.198691] mmcblk0: mmc0:0001 EB1QT 29.8 GiB <6>[ 3.206325] mmcblk0: p1 <4>[ 3.223516] mmc1: unexpected status 0x2000980 after switch <4>[ 3.230940] mmc1: unexpected status 0x2000900 after switch <4>[ 3.237012] mmc1: unexpected status 0x2000900 after switch <4>[ 3.243409] mmc1: unexpected status 0x2000900 after switch <6>[ 3.249247] mmc1: new high speed MMC card at address 0001 <6>[ 3.256127] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 3.267276] mmcblk1: mmc1:0001 MMC02G 1.79 GiB <4>[ 4.915574] mmc1: unexpected status 0x2000980 after switch <4>[ 4.923001] mmc1: unexpected status 0x2000900 after switch <4>[ 4.929114] mmc1: unexpected status 0x2000900 after switch <4>[ 4.935413] mmc1: unexpected status 0x2000900 after switch <6>[ 5.398581] cpsw-switch 4a100000.switch eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 5.407199] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 5.437849] Sending DHCP requests . <3>[ 5.690863] I/O error, dev mmcblk1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <3>[ 6.453104] I/O error, dev mmcblk1, sector 1 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <3>[ 7.211560] I/O error, dev mmcblk1, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <4>[ 7.517838] . <3>[ 7.969995] I/O error, dev mmcblk1, sector 3 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <3>[ 8.421775] DHCP/BOOTP: Reply not for us on eth0, op[2] xid[2f5b9771] <3>[ 8.460879] DHCP/BOOTP: Reply not for us on eth0, op[2] xid[2f5b9771] <3>[ 8.676533] DHCP/BOOTP: Reply not for us on eth0, op[2] xid[47bfc6a2] <3>[ 8.733800] DHCP/BOOTP: Reply not for us on eth0, op[2] xid[47bfc6a2] <3>[ 8.740756] I/O error, dev mmcblk1, sector 4 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <3>[ 9.499176] I/O error, dev mmcblk1, sector 5 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <3>[ 9.962782] DHCP/BOOTP: Reply not for us on eth0, op[2] xid[2198c452] <3>[ 10.004730] DHCP/BOOTP: Reply not for us on eth0, op[2] xid[2198c452] <3>[ 10.257612] I/O error, dev mmcblk1, sector 6 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <3>[ 11.016057] I/O error, dev mmcblk1, sector 7 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <3>[ 11.024854] Buffer I/O error on dev mmcblk1, logical block 0, async page read <4>[ 11.167839] ., OK <6>[ 11.550151] IP-Config: Got DHCP answer from 192.168.56.254, my address is 192.168.56.218 <6>[ 11.558607] IP-Config: Complete: <6>[ 11.562112] device=eth0, hwaddr=c8:a0:30:c2:c5:7d, ipaddr=192.168.56.218, mask=255.255.255.0, gw=192.168.56.254 <6>[ 11.573095] host=192.168.56.218, domain=mayfield.sirena.org.uk, nis-domain=(none) <6>[ 11.581379] bootserver=192.168.56.254, rootserver=192.168.56.254, rootpath= <6>[ 11.581393] nameserver0=192.168.56.254 <6>[ 11.593585] ntpserver0=50.205.244.22, ntpserver1=85.199.214.99 <6>[ 11.600584] clk: Disabling unused clocks <6>[ 11.607010] Freeing unused kernel image (initmem) memory: 1024K <6>[ 11.613907] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 11.982722] udevd[108]: starting version 3.2.9 <3>[ 14.183476] I/O error, dev mmcblk1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <5>[ 14.557848] random: crng init done <27>[ 14.573011] udevd[108]: specified user 'tss' unknown <27>[ 14.578886] udevd[108]: specified group 'tss' unknown <30>[ 14.600258] udevd[109]: starting eudev-3.2.9 <3>[ 14.942430] I/O error, dev mmcblk1, sector 1 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <6>[ 15.319824] remoteproc remoteproc0: wkup_m3 is available <4>[ 15.376164] at24 2-0054: supply vcc not found, using dummy regulator <4>[ 15.491990] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <4>[ 15.538608] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 15.598293] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 15.607309] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 15.701236] omap_rtc 44e3e000.rtc: registered as rtc0 <6>[ 15.706656] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) <3>[ 15.718582] I/O error, dev mmcblk1, sector 2 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <6>[ 15.732108] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <6>[ 15.741233] input: tps65217_pwrbutton as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <4>[ 15.760610] at24 2-0056: supply vcc not found, using dummy regulator <6>[ 15.776034] usbcore: registered new interface driver usbfs <6>[ 15.782148] usbcore: registered new interface driver hub <6>[ 15.787946] usbcore: registered new device driver usb <4>[ 15.845897] at24 2-0057: supply vcc not found, using dummy regulator <4>[ 15.956084] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 15.965203] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 15.989821] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 16.123633] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 16.129526] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 16.142273] tda998x 0-0070: found TDA19988 <6>[ 16.179173] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 <6>[ 16.187788] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 16.195440] usb usb1: Product: MUSB HDRC host driver <6>[ 16.200726] usb usb1: Manufacturer: Linux 6.1.96-cip24 musb-hcd <6>[ 16.206939] usb usb1: SerialNumber: musb-hdrc.1 <6>[ 16.394347] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <3>[ 16.477446] I/O error, dev mmcblk1, sector 3 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <6>[ 16.648725] hub 1-0:1.0: USB hub found <6>[ 16.704472] hub 1-0:1.0: 1 port detected <6>[ 16.737224] remoteproc remoteproc0: powering up wkup_m3 <6>[ 16.769279] omap_rng 48310000.rng: Random Number Generator ver. 20 <4>[ 16.777234] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 16.787297] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 16.793563] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <6>[ 17.167968] usb 1-1: new low-speed USB device number 2 using musb-hdrc <3>[ 17.248143] I/O error, dev mmcblk1, sector 4 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <3>[ 17.317867] usb 1-1: device descriptor read/64, error -71 <3>[ 17.587966] usb 1-1: device descriptor read/64, error -71 <6>[ 17.857962] usb 1-1: new low-speed USB device number 3 using musb-hdrc <3>[ 18.018209] I/O error, dev mmcblk1, sector 5 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <3>[ 18.028835] usb 1-1: device descriptor read/64, error -71 <3>[ 18.297932] usb 1-1: device descriptor read/64, error -71 <6>[ 18.418156] usb usb1-port1: attempt power cycle <6>[ 18.638082] usb 1-1: new low-speed USB device number 4 using musb-hdrc <3>[ 18.788463] I/O error, dev mmcblk1, sector 6 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <6>[ 19.228029] usb 1-1: new low-speed USB device number 5 using musb-hdrc <3>[ 19.558896] I/O error, dev mmcblk1, sector 7 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <3>[ 19.567757] Buffer I/O error on dev mmcblk1, logical block 0, async page read <6>[ 19.575567] mmcblk1: unable to read partition table <6>[ 19.583886] mmcblk1boot0: mmc1:0001 MMC02G 1.00 MiB <6>[ 19.595965] mmcblk1boot1: mmc1:0001 MMC02G 1.00 MiB <6>[ 19.608838] mmcblk1rpmb: mmc1:0001 MMC02G 128 KiB, chardev (250:0) <6>[ 19.743367] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_audio_codec_init [tda998x]) <6>[ 19.831894] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 <6>[ 19.858246] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 <6>[ 19.878057] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 <3>[ 19.912185] PM: Cannot get wkup_m3_ipc handle <6>[ 20.018090] omap-sham 53100000.sham: will run requests pump with realtime priority <6>[ 20.033804] omap-aes 53500000.aes: will run requests pump with realtime priority <3>[ 20.058077] tda998x 0-0070: read edid timeout <4>[ 20.084851] tda998x 0-0070: failed to read EDID <3>[ 20.107174] PM: Cannot get wkup_m3_ipc handle <3>[ 20.129554] PM: Cannot get wkup_m3_ipc handle <6>[ 20.165748] Console: switching to colour frame buffer device 128x48 <6>[ 20.246555] tilcdc 4830e000.lcdc: [drm] fb0: tilcdcdrmfb frame buffer device <3>[ 20.276268] PM: Cannot get wkup_m3_ipc handle <3>[ 20.388122] tda998x 0-0070: read edid timeout <4>[ 20.403405] tda998x 0-0070: failed to read EDID <3>[ 20.706857] PM: Cannot get wkup_m3_ipc handle <3>[ 20.743048] PM: Cannot get wkup_m3_ipc handle <3>[ 24.037797] I/O error, dev mmcblk1, sector 3751808 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 <3>[ 24.808853] I/O error, dev mmcblk1, sector 3751809 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 <3>[ 25.580179] I/O error, dev mmcblk1, sector 3751810 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 <3>[ 26.351510] I/O error, dev mmcblk1, sector 3751811 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 <3>[ 27.122689] I/O error, dev mmcblk1, sector 3751812 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 <3>[ 27.893696] I/O error, dev mmcblk1, sector 3751813 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 <3>[ 28.665326] I/O error, dev mmcblk1, sector 3751814 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 <3>[ 29.436329] I/O error, dev mmcblk1, sector 3751815 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 <3>[ 32.677171] I/O error, dev mmcblk1, sector 3751808 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <3>[ 33.448087] I/O error, dev mmcblk1, sector 3751809 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <3>[ 34.218682] I/O error, dev mmcblk1, sector 3751810 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <3>[ 34.989403] I/O error, dev mmcblk1, sector 3751811 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <3>[ 35.760373] I/O error, dev mmcblk1, sector 3751812 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <3>[ 36.531230] I/O error, dev mmcblk1, sector 3751813 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <3>[ 37.301817] I/O error, dev mmcblk1, sector 3751814 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <3>[ 38.072561] I/O error, dev mmcblk1, sector 3751815 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 <3>[ 38.082053] Buffer I/O error on dev mmcblk1, logical block 468976, async page read <4>[ 38.105717] mmc1: unexpected status 0x2000900 after switch <4>[ 39.800956] mmc1: unexpected status 0x2000980 after switch <4>[ 39.808979] mmc1: unexpected status 0x2000900 after switch <4>[ 39.816918] mmc1: unexpected status 0x2000900 after switch <4>[ 39.823463] mmc1: unexpected status 0x2000900 after switch <4>[ 39.830304] mmc1: unexpected status 0x2000900 after switch <4>[ 39.836976] mmc1: unexpected status 0x2000900 after switch <3>[ 40.604064] I/O error, dev mmcblk1boot0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 <3>[ 41.375191] I/O error, dev mmcblk1boot0, sector 1 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 <3>[ 42.146222] I/O error, dev mmcblk1boot0, sector 2 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 <3>[ 42.917207] I/O error, dev mmcblk1boot0, sector 3 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 <3>[ 43.688360] I/O error, dev mmcblk1boot0, sector 4 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 <3>[ 44.459358] I/O error, dev mmcblk1boot0, sector 5 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 <3>[ 45.230390] I/O error, dev mmcblk1boot0, sector 6 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 udevadm settle failed done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL <3>[ 45.990473] I/O error, dev mmcblk1boot0, sector 7 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 <4>[ 46.000832] mmc1: unexpected status 0x2000900 after switch Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-555660/environment . /lava-555660/environment / # /lava-555660/bin/lava-test-runner /lava-555660/0 /lava-555660/bin/lava-test-runner /lava-555660/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-555660/0/tests/0_dmesg + cat uuid + UUID=555660_1.5.2.4.1 <8>[ 46.703620] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 46.880788] <8>[ 46.949328] <8>[ 47.017438] + set +x <8>[ 47.029331] <3>[