connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/882586/tftp-deploy-0lwtgoo9/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/882586/tftp-deploy-0lwtgoo9/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/882586/tftp-deploy-0lwtgoo9/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/882586/tftp-deploy-0lwtgoo9/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/882586/tftp-deploy-0lwtgoo9/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/882586/tftp-deploy-0lwtgoo9/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 92:56:66:27:55:c5 T eth0: DHCP client bound to address 10.8.254.156 Loading ARM Linux zImage '/mnt/tftp/882586/tftp-deploy-0lwtgoo9/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12899000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/882586/tftp-deploy-0lwtgoo9/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x188d6b86 Loading devicetree from '/mnt/tftp/882586/tftp-deploy-0lwtgoo9/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x12899000, initrd at 0x18000000, oftree at 0x188d7000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.269-cip85-rt28 (KernelCI@build-j877052-arm-gcc-10-imx-v6-v7-defconfig-zqpjz) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Wed Jan 18 20:04:49 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x8a000000 [ 0.000000] percpu: Embedded 17 pages/cpu s38184 r8192 d23256 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1978968K/2097152K available (11264K kernel code, 880K rwdata, 3616K rodata, 1024K init, 7651K bss, 52648K reserved, 65536K cma-reserved, 1244148K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 881 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7652 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000009] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000037] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001599] Console: colour dummy device 80x30 [ 0.001642] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001659] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001678] ... MAX_LOCK_DEPTH: 48 [ 0.001693] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001710] ... CLASSHASH_SIZE: 4096 [ 0.001727] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001743] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001760] ... CHAINHASH_SIZE: 32768 [ 0.001775] memory used by lock dependency info: 4655 kB [ 0.001792] per task-struct memory footprint: 1536 bytes [ 0.001891] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.001920] pid_max: default: 32768 minimum: 301 [ 0.002315] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002353] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.005156] CPU: Testing write buffer coherency: ok [ 0.005239] CPU0: Spectre v2: using BPIALL workaround [ 0.006697] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.008910] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.009479] rcu: Hierarchical SRCU implementation. [ 0.012300] smp: Bringing up secondary CPUs ... [ 0.015035] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.015046] CPU1: Spectre v2: using BPIALL workaround [ 0.018091] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.018103] CPU2: Spectre v2: using BPIALL workaround [ 0.020845] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.020856] CPU3: Spectre v2: using BPIALL workaround [ 0.021236] smp: Brought up 1 node, 4 CPUs [ 0.021262] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.021283] CPU: All CPU(s) started in SVC mode. [ 0.023729] devtmpfs: initialized [ 0.049011] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.051694] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.051758] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.055652] pinctrl core: initialized pinctrl subsystem [ 0.061398] NET: Registered protocol family 16 [ 0.080896] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.084240] cpuidle: using governor menu [ 0.084468] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.100593] vdd1p1: supplied by regulator-dummy [ 0.102114] vdd3p0: supplied by regulator-dummy [ 0.103359] vdd2p5: supplied by regulator-dummy [ 0.104557] vddarm: supplied by regulator-dummy [ 0.106245] vddpu: supplied by regulator-dummy [ 0.107096] vddsoc: supplied by regulator-dummy [ 0.133150] No ATAGs? [ 0.133598] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.133709] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.136107] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.136998] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.198898] mxs-dma 110000.dma-apbh: initialized [ 0.201918] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.iomuxc; cannot claim for regulator-usbotgvbus [ 0.201949] imx6q-pinctrl 20e0000.iomuxc: pin-42 (regulator-usbotgvbus) status -22 [ 0.201976] imx6q-pinctrl 20e0000.iomuxc: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.iomuxc [ 0.201998] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.202074] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.205050] vgaarb: loaded [ 0.206104] SCSI subsystem initialized [ 0.207417] usbcore: registered new interface driver usbfs [ 0.207622] usbcore: registered new interface driver hub [ 0.207764] usbcore: registered new device driver usb [ 0.210901] i2c i2c-0: IMX I2C adapter registered [ 0.210947] i2c i2c-0: can't use DMA, using PIO instead. [ 0.212548] i2c i2c-1: IMX I2C adapter registered [ 0.212592] i2c i2c-1: can't use DMA, using PIO instead. [ 0.213930] i2c i2c-2: IMX I2C adapter registered [ 0.213972] i2c i2c-2: can't use DMA, using PIO instead. [ 0.214312] media: Linux media interface: v0.10 [ 0.214425] videodev: Linux video capture interface: v2.00 [ 0.214868] pps_core: LinuxPPS API ver. 1 registered [ 0.214890] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.214945] PTP clock support registered [ 0.215731] Advanced Linux Sound Architecture Driver Initialized. [ 0.219168] Bluetooth: Core ver 2.22 [ 0.219289] NET: Registered protocol family 31 [ 0.219312] Bluetooth: HCI device and connection manager initialized [ 0.219428] Bluetooth: HCI socket layer initialized [ 0.219464] Bluetooth: L2CAP socket layer initialized [ 0.219779] Bluetooth: SCO socket layer initialized [ 0.221863] clocksource: Switched to clocksource mxc_timer1 [ 0.433967] VFS: Disk quotas dquot_6.6.0 [ 0.434143] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.461896] NET: Registered protocol family 2 [ 0.462502] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.465230] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) [ 0.465358] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.465523] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.466643] TCP: Hash tables configured (established 8192 bind 8192) [ 0.467315] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.467506] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.468127] NET: Registered protocol family 1 [ 0.470221] RPC: Registered named UNIX socket transport module. [ 0.470295] RPC: Registered udp transport module. [ 0.470316] RPC: Registered tcp transport module. [ 0.470336] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.473049] Trying to unpack rootfs image as initramfs... [ 1.434090] Freeing initrd memory: 9052K [ 1.435094] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 1.435928] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.440741] Initialise system trusted keyrings [ 1.441545] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.457898] NFS: Registering the id_resolver key type [ 1.458107] Key type id_resolver registered [ 1.458186] Key type id_legacy registered [ 1.458376] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.459916] fuse init (API version 7.27) [ 1.473201] Key type asymmetric registered [ 1.473395] Asymmetric key parser 'x509' registered [ 1.473691] bounce: pool size: 64 pages [ 1.473818] io scheduler noop registered [ 1.473844] io scheduler deadline registered [ 1.474179] io scheduler cfq registered (default) [ 1.474208] io scheduler mq-deadline registered [ 1.474230] io scheduler kyber registered [ 1.489379] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.489640] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.492320] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 1.492809] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 1.493033] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 1.493454] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 1.493934] PU : no governor for states [ 1.493988] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 1.497497] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1 [ 1.498374] pfuze100-regulator 2-0008: FAB: 0, FIN: 0 [ 1.498399] pfuze100-regulator 2-0008: pfuze100 found. [ 1.524941] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX [ 2.491413] console [ttymxc0] enabled [ 2.498252] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 66, base_baud = 5000000) is a IMX [ 2.523081] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 2.529329] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 2.535597] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 2.541288] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 2.550711] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 2.558826] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 2.565023] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 2.573939] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 [ 2.584076] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21c8000.pre [ 2.590897] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21c9000.pre [ 2.597758] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21ca000.pre [ 2.605146] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21cb000.pre [ 2.612021] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21c9000.pre [ 2.618763] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21ca000.pre [ 2.626594] imx-ipuv3 2400000.ipu: Linked as a consumer to 21cc000.prg [ 2.635257] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.640187] imx-ipuv3 2800000.ipu: Linked as a consumer to 21cd000.prg [ 2.649346] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.656139] [drm] No driver support for vblank timestamp query. [ 2.663845] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.671569] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.679563] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 2.687437] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 2.696084] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 2.710966] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 2.719485] [drm] Cannot find any crtc or sizes [ 2.727139] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.735174] imx-ipuv3 2800000.ipu: IPUv3H probed [ 2.763842] brd: module loaded [ 2.796177] loop: module loaded [ 2.801426] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.809457] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.817538] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.825788] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.836967] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.844073] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.852944] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.865805] scsi host0: ahci-imx [ 2.870605] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 73 [ 2.887141] CAN device driver interface [ 2.893883] fec 2188000.ethernet: Linked as a consumer to regulator.9 [ 2.903889] pps pps0: new PPS source ptp0 [ 2.946367] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.954289] usbcore: registered new interface driver asix [ 2.959799] usbcore: registered new interface driver ax88179_178a [ 2.966123] usbcore: registered new interface driver cdc_ether [ 2.972220] usbcore: registered new interface driver net1080 [ 2.977994] usbcore: registered new interface driver cdc_subset [ 2.984127] usbcore: registered new interface driver zaurus [ 2.989864] usbcore: registered new interface driver cdc_ncm [ 2.995619] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.002230] ehci-pci: EHCI PCI platform driver [ 3.006833] ehci-mxc: Freescale On-Chip EHCI Host driver [ 3.013152] usbcore: registered new interface driver usb-storage [ 3.023302] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 3.031843] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 3.042001] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 3.047537] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 3.081946] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 3.091679] hub 1-0:1.0: USB hub found [ 3.095878] hub 1-0:1.0: 1 port detected [ 3.112372] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 3.118860] i2c /dev entries driver [ 3.132609] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 3.139310] Bluetooth: HCI UART driver ver 2.3 [ 3.143853] Bluetooth: HCI UART protocol H4 registered [ 3.149129] Bluetooth: HCI UART protocol LL registered [ 3.155959] sdhci: Secure Digital Host Controller Interface driver [ 3.162221] sdhci: Copyright(c) Pierre Ossman [ 3.166595] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.173776] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 3.202979] ata1: SATA link down (SStatus 0 SControl 300) [ 3.208611] ahci-imx 2200000.sata: no device found, disabling link. [ 3.214990] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 3.223503] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 3.268793] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 3.276215] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.285423] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 3.291248] mmc0: new high speed SDHC card at address 1234 [ 3.302898] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.322382] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.336220] caam 2100000.caam: Entropy delay = 3200 [ 3.381938] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.401940] caam 2100000.caam: Instantiated RNG4 SH0 [ 3.462702] caam 2100000.caam: Instantiated RNG4 SH1 [ 3.467694] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4) [ 3.474207] caam 2100000.caam: job rings = 2, qi = 0 [ 3.497390] caam algorithms registered in /proc/crypto [ 3.508866] caam_jr 2101000.jr0: registering rng-caam [ 3.515695] usbcore: registered new interface driver usbhid [ 3.521291] usbhid: USB HID core driver [ 3.531111] imx-media: subdev ipu1_vdic bound [ 3.535949] imx-media: subdev ipu2_vdic bound [ 3.540792] imx-media: subdev ipu1_ic_prp bound [ 3.546892] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0 [ 3.554500] imx-media: subdev ipu1_ic_prpenc bound [ 3.562026] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1 [ 3.563153] mmc2: new DDR MMC card at address 0001 [ 3.568971] imx-media: subdev ipu1_ic_prpvf bound [ 3.576503] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.578787] imx-media: subdev ipu2_ic_prp bound [ 3.584779] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 3.593936] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2 [ 3.595631] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 3.601085] imx-media: subdev ipu2_ic_prpenc bound [ 3.608208] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (244:0) [ 3.609855] hub 1-1:1.0: USB hub found [ 3.610795] hub 1-1:1.0: 4 ports detected [ 3.621082] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3 [ 3.628824] mmcblk2: p1 p2 [ 3.634171] imx-media: subdev ipu2_ic_prpvf bound [ 3.643376] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4 [ 3.649587] imx-media: subdev ipu1_csi0 bound [ 3.654838] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5 [ 3.661044] imx-media: subdev ipu1_csi1 bound [ 3.666250] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6 [ 3.672583] imx-media: subdev ipu2_csi0 bound [ 3.677689] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 [ 3.684018] imx-media: subdev ipu2_csi1 bound [ 3.697993] sgtl5000 1-000a: Linked as a consumer to regulator.7 [ 3.704379] sgtl5000 1-000a: Linked as a consumer to regulator.8 [ 3.712426] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 3.722863] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 3.752474] [drm] Cannot find any crtc or sizes [ 3.770196] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered [ 3.780369] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 4.193540] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok [ 4.217347] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 4.229089] NET: Registered protocol family 10 [ 4.237610] Segment Routing with IPv6 [ 4.241523] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.249623] NET: Registered protocol family 17 [ 4.254314] can: controller area network core (rev 20170425 abi 9) [ 4.260695] NET: Registered protocol family 29 [ 4.265290] can: raw protocol (rev 20170425) [ 4.269730] can: broadcast manager protocol (rev 20170425 t) [ 4.275558] can: netlink gateway (rev 20170425) max_hops=1 [ 4.281877] Key type dns_resolver registered [ 4.288079] cpu cpu0: Linked as a consumer to regulator.4 [ 4.293852] cpu cpu0: Linked as a consumer to regulator.5 [ 4.299522] cpu cpu0: Linked as a consumer to regulator.6 [ 4.309942] Registering SWP/SWPB emulation handler [ 4.317050] Loading compiled-in X.509 certificates [ 4.393718] imx-media: subdev ipu1_csi0_mux bound [ 4.399239] imx-media: subdev ipu2_csi1_mux bound [ 4.404288] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0 [ 4.409193] imx-media: ipu2_csi1:1 -> ipu2_vdic:0 [ 4.414053] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0 [ 4.419131] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0 [ 4.424114] imx-media: ipu2_csi0:1 -> ipu2_vdic:0 [ 4.428857] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0 [ 4.433791] imx-media: ipu1_csi1:1 -> ipu1_vdic:0 [ 4.438531] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 [ 4.443469] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 [ 4.448202] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0 [ 4.453319] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0 [ 4.458651] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0 [ 4.463978] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 [ 4.469311] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 [ 4.474600] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0 [ 4.479495] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 [ 4.493568] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 4.508518] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 4.518027] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.571458] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.579039] ALSA device list: [ 4.582077] #0: imx6-wandboard-sgtl5000 [ 4.586099] #1: imx-spdif [ 4.589547] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.598366] cfg80211: failed to load regulatory.db [ 4.605674] Freeing unused kernel memory: 1024K [ 4.663199] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 4.953987] udevd[190]: starting version 3.2.9 [ 4.960898] random: udevd: uninitialized urandom read (16 bytes read) [ 4.968474] random: udevd: uninitialized urandom read (16 bytes read) [ 4.975428] random: udevd: uninitialized urandom read (16 bytes read) [ 4.991741] udevd[190]: specified user 'tss' unknown [ 4.996958] udevd[190]: specified group 'tss' unknown [ 5.008052] udevd[191]: starting eudev-3.2.9 [ 5.583322] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 5.594243] coda 2040000.vpu: Direct firmware load for vpu/vpu_fw_imx6q.bin failed with error -2 [ 5.611304] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6q.bin failed with error -2 [ 5.624361] coda 2040000.vpu: firmware request failed done Saving random seed: OK Starting network: OK Starting dropbear sshd: [ 6.143533] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-882586/environment . /lava-882586/environment / # /lava-882586/bin/lava-test-runner /lava-882586/0 /lava-882586/bin/lava-test-runner /lava-882586/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-882586/0/tests/0_dmesg + cat uuid + UUID=882586_1.5.2.3.1 [ 6.826967] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 6.915761] [ 6.995955] [ 7.069900] + set +x[ 7.080960] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-882586/environment / # . /lava-882586/environment/lava-882586/bin/lava-test-runner /lava-882586/1 / # /lava-882586/bin/lava-test-runner /lava-882586/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-882586/1/tests/1_bootrr + cat uuid + UUID=882586_1.5.2.3.5 [ 7.649178] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-882586/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 2184000.usb /lava-882586/1/../bin/lava-test-case [ 8.787932] /lava-882586/1/../bin/lava-test-case [ 8.870698] /lava-882586/1/../bin/lava-test-case [ 8.916375] + set +x [ 8.949561] / #