Trying 192.168.1.205... Connected to ts5. Escape character is '^]'. ser2net port telnet,2002 device serialdev,/dev/ttyUSB-lf-bbb-02,115200n81,local [] (Debian GNU/Linux) U-Boot SPL 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) Trying to boot from MMC2 U-Boot 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 172.16.3.187 (109 ms) => setenv serverip 172.16.3.3 setenv serverip 172.16.3.3 => tftp 0x82000000 883360/tftp-deploy-rqc4dfw4/kernel/zImage tftp 0x82000000 883360/tftp-deploy-rqc4dfw4/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.187 Filename '883360/tftp-deploy-rqc4dfw4/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 4.3 MiB 3.8 MiB/s done Bytes transferred = 4518976 (44f440 hex) => tftp 0x83000000 883360/tftp-deploy-rqc4dfw4/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 883360/tftp-deploy-rqc4dfw4/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.187 Filename '883360/tftp-deploy-rqc4dfw4/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 12.1 MiB 3.3 MiB/s done Bytes transferred = 12687773 (c1999d hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 883360/tftp-deploy-rqc4dfw4/dtb/am335x-boneblack.dtb tftp 0x88000000 883360/tftp-deploy-rqc4dfw4/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.187 Filename '883360/tftp-deploy-rqc4dfw4/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 34.1 KiB 3 MiB/s done Bytes transferred = 34893 (884d hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x44f440 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-03-22 9:49:47 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 12687709 Bytes = 12.1 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8800b84c Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.277-cip94-rt29 (KernelCI@build-j1226270-arm-gcc-10-omap2plus-defconfig-cwcrh) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Wed Mar 22 09:11:17 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 17 pages/cpu s38824 r8192 d22616 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) <6>[ 0.000000] Memory: 466588K/522240K available (9216K kernel code, 794K rwdata, 2608K rodata, 1024K init, 7477K bss, 39268K reserved, 16384K cma-reserved, 0K highmem) <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) <5>[ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) <5>[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) <5>[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 795 kB) <5>[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7478 kB) <6>[ 0.000000] Running RCU self tests <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU lockdep checking is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz <6>[ 0.000019] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008366] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018170] OMAP clocksource: timer1 at 24000000 Hz <2>[ 0.023947] timer_probe: no matching timers found <6>[ 0.030357] Console: colour dummy device 80x30 <3>[ 0.035257] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042306] This ensures that you still see kernel messages. Please <3>[ 0.049057] update your kernel commandline. <4>[ 0.053634] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.061901] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.066387] ... MAX_LOCK_DEPTH: 48 <4>[ 0.070988] ... MAX_LOCKDEP_KEYS: 8191 <4>[ 0.075743] ... CLASSHASH_SIZE: 4096 <4>[ 0.080524] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.085367] ... MAX_LOCKDEP_CHAINS: 65536 <4>[ 0.090236] ... CHAINHASH_SIZE: 32768 <4>[ 0.095079] memory used by lock dependency info: 4655 kB <4>[ 0.100931] per task-struct memory footprint: 1536 bytes <6>[ 0.106806] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.145380] pid_max: default: 32768 minimum: 301 <6>[ 0.150847] Security Framework initialized <6>[ 0.155462] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) <6>[ 0.162602] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) <6>[ 0.173338] CPU: Testing write buffer coherency: ok <6>[ 0.178876] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.186017] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.194177] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.201955] rcu: Hierarchical SRCU implementation. <6>[ 0.209709] smp: Bringing up secondary CPUs ... <6>[ 0.214657] smp: Brought up 1 node, 1 CPU <6>[ 0.219144] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.225869] CPU: All CPU(s) started in SVC mode. <6>[ 0.234937] devtmpfs: initialized <6>[ 0.265130] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.274203] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.284731] futex hash table entries: 256 (order: 2, 16384 bytes) <6>[ 0.292982] pinctrl core: initialized pinctrl subsystem <6>[ 0.304348] NET: Registered protocol family 16 <6>[ 0.316377] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.385583] l4_wkup_cm:clk:0010:0: failed to disable <6>[ 0.445338] audit: initializing netlink subsys (disabled) <6>[ 0.454486] cpuidle: using governor menu <5>[ 0.472708] audit: type=2000 audit(0.420:1): state=initialized audit_enabled=0 res=1 <6>[ 0.482476] OMAP GPIO hardware version 0.1 <6>[ 0.512864] No ATAGs? <6>[ 0.512880] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 0.559846] edma 49000000.edma: TI EDMA DMA engine driver <6>[ 0.572363] vgaarb: loaded <5>[ 0.576512] SCSI subsystem initialized <6>[ 0.583263] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.588793] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.598519] PTP clock support registered <6>[ 0.607020] clocksource: Switched to clocksource timer1 <5>[ 0.769369] VFS: Disk quotas dquot_6.6.0 <6>[ 0.773897] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 0.809219] NET: Registered protocol family 2 <6>[ 0.814622] IP idents hash table entries: 8192 (order: 4, 65536 bytes) <6>[ 0.823715] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 10240 bytes) <6>[ 0.832231] TCP established hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 0.839906] TCP bind hash table entries: 4096 (order: 5, 147456 bytes) <6>[ 0.847495] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 0.854750] UDP hash table entries: 256 (order: 2, 20480 bytes) <6>[ 0.861308] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) <6>[ 0.868708] NET: Registered protocol family 1 <6>[ 0.876527] RPC: Registered named UNIX socket transport module. <6>[ 0.883139] RPC: Registered udp transport module. <6>[ 0.888357] RPC: Registered tcp transport module. <6>[ 0.893473] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.902509] Trying to unpack rootfs image as initramfs... <6>[ 2.124336] Freeing initrd memory: 12392K <6>[ 2.131251] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 2.145756] Initialise system trusted keyrings <6>[ 2.152199] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 2.162875] NFS: Registering the id_resolver key type <5>[ 2.168733] Key type id_resolver registered <5>[ 2.173366] Key type id_legacy registered <6>[ 2.178066] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 2.194068] Key type asymmetric registered <5>[ 2.199042] Asymmetric key parser 'x509' registered <6>[ 2.204516] io scheduler noop registered <6>[ 2.208944] io scheduler deadline registered <6>[ 2.213791] io scheduler cfq registered (default) <6>[ 2.219002] io scheduler mq-deadline registered <6>[ 2.223944] io scheduler kyber registered <6>[ 2.231415] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 2.246172] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <6>[ 2.266446] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250 <6>[ 2.276502] console [ttyS0] enabled <6>[ 2.276502] console [ttyS0] enabled <6>[ 2.284328] bootconsole [omap8250] disabled <6>[ 2.284328] bootconsole [omap8250] disabled <6>[ 2.326621] brd: module loaded <6>[ 2.357570] loop: module loaded <3>[ 2.363743] mtdoops: mtd device (mtddev=name/number) must be supplied <6>[ 2.447009] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 2.455029] davinci_mdio 4a101000.mdio: detected phy mask fffffffe <6>[ 2.498086] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 2.509140] cpsw 4a100000.ethernet: Detected MACID = 04:79:b7:e7:06:e0 <6>[ 2.517011] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 2.523685] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 2.529381] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) <6>[ 2.540386] i2c /dev entries driver <6>[ 2.548278] sdhci: Secure Digital Host Controller Interface driver <6>[ 2.554781] sdhci: Copyright(c) Pierre Ossman <6>[ 2.560995] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 2.570603] omap_hsmmc 48060000.mmc: Got CD GPIO <6>[ 2.577555] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.1 <6>[ 2.613724] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.1 <6>[ 2.645841] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 2.652600] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 2.662160] oprofile: using arm/armv7 <6>[ 2.667280] Initializing XFRM netlink socket <6>[ 2.672515] NET: Registered protocol family 10 <6>[ 2.682408] Segment Routing with IPv6 <6>[ 2.686557] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 2.694964] NET: Registered protocol family 17 <6>[ 2.699952] NET: Registered protocol family 15 <5>[ 2.705115] Key type dns_resolver registered <6>[ 2.709920] ThumbEE CPU extension supported. <5>[ 2.714514] Registering SWP/SWPB emulation handler <3>[ 2.719739] omap_voltage_late_init: Voltage driver support not added <3>[ 2.726408] sr_dev_init: Unknown instance smartreflex0 <6>[ 2.732367] SmartReflex Class3 initialized <5>[ 2.740474] Loading compiled-in X.509 certificates <6>[ 2.840754] mmc1: new high speed MMC card at address 0001 <6>[ 2.851963] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 2.858806] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB <6>[ 2.866721] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB <6>[ 2.876964] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (248:0) <6>[ 2.892864] mmcblk1: p1 <6>[ 2.917926] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 2.924624] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 2.934994] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 2.942777] hctosys: unable to open rtc device (rtc0) <4>[ 2.948326] sr_init: No PMIC hook to init smartreflex <6>[ 2.972734] net eth0: initializing cpsw version 1.12 (0) <6>[ 3.078317] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 3.101907] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready <6>[ 5.158396] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx <6>[ 5.177098] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 5.206938] Sending DHCP requests ., OK <6>[ 5.331138] IP-Config: Got DHCP answer from 172.16.3.3, my address is 172.16.3.187 <6>[ 5.339112] IP-Config: Complete: <6>[ 5.342634] device=eth0, hwaddr=04:79:b7:e7:06:e0, ipaddr=172.16.3.187, mask=255.255.255.0, gw=172.16.3.3 <6>[ 5.353033] host=172.16.3.187, domain=denx.de, nis-domain=(none) <6>[ 5.359830] bootserver=172.16.3.33, rootserver=172.16.3.33, rootpath= <6>[ 5.359836] nameserver0=172.16.3.3 <6>[ 5.371190] ntpserver0=172.16.3.3 <6>[ 5.382435] Freeing unused kernel memory: 1024K <6>[ 5.397845] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 5.852553] udevd[87]: starting version 3.2.9 <5>[ 5.861022] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 5.869989] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 5.877837] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 5.898945] udevd[87]: specified user 'tss' unknown <27>[ 5.904533] udevd[87]: specified group 'tss' unknown <30>[ 5.921615] udevd[88]: starting eudev-3.2.9 <6>[ 6.608054] cpu cpu0: Linked as a consumer to regulator.3 <6>[ 6.614300] cpu cpu0: Dropping the link to regulator.3 <6>[ 6.708384] cpu cpu0: Linked as a consumer to regulator.3 <6>[ 6.721503] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <6>[ 6.760345] omap_rtc 44e3e000.rtc: registered as rtc0 <4>[ 6.866096] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <6>[ 6.889520] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 7.004437] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <6>[ 7.020428] input: tps65217_pwrbutton as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <6>[ 7.307639] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 7.315652] random: crng init done <6>[ 7.403052] tda998x 0-0070: found TDA19988 <6>[ 7.464275] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops [tda998x]) <6>[ 7.472081] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). <6>[ 7.479900] [drm] No driver support for vblank timestamp query. <6>[ 7.658350] [drm] Cannot find any crtc or sizes <6>[ 7.700065] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 <6>[ 7.883854] remoteproc remoteproc0: wkup_m3 is available <6>[ 7.969105] remoteproc remoteproc0: powering up wkup_m3 <4>[ 7.975662] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 7.986198] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 7.992629] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <4>[ 8.154147] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator <6>[ 8.164999] am335x-phy-driver 47401300.usb-phy: Linked as a consumer to regulator.0 <6>[ 8.193670] usbcore: registered new interface driver usbfs <6>[ 8.201242] usbcore: registered new interface driver hub <6>[ 8.207306] usbcore: registered new device driver usb <4>[ 8.365750] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator <6>[ 8.376562] am335x-phy-driver 47401b00.usb-phy: Linked as a consumer to regulator.0 <3>[ 8.489638] pm33xx pm33xx: PM: Unable to allocate memory from ocmcram <4>[ 8.496473] pm33xx: probe of pm33xx failed with error -12 <6>[ 8.510948] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 8.518156] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 8.681010] [drm] Cannot find any crtc or sizes <6>[ 8.686694] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 <6>[ 8.695691] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.703340] usb usb1: Product: MUSB HDRC host driver <6>[ 8.708682] usb usb1: Manufacturer: Linux 4.19.277-cip94-rt29 musb-hcd <6>[ 8.715517] usb usb1: SerialNumber: musb-hdrc.1 <6>[ 8.861237] hub 1-0:1.0: USB hub found <6>[ 8.884680] hub 1-0:1.0: 1 port detected <6>[ 8.971745] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-883360/environment . /lava-883360/environment / # /lava-883360/bin/lava-test-runner /lava-883360/0 /lava-883360/bin/lava-test-runner /lava-883360/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-883360/0/tests/0_dmesg + cat uuid + UUID=883360_1.5.2.4.1 <8>[ 10.373373] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh kern :crit : timer_probe: no matching timers found <8>[ 10.491903] <8>[ 10.595813] <8>[ 10.703214] + set +x<8>[ 10.716249] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-883360/environment / # . /lava-883360/environment/lava-883360/bin/lava-test-runner /lava-883360/1 / # /lava-883360/bin/lava-test-runner /lava-883360/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-883360/1/tests/1_bootrr + cat uuid + UUID=883360_1.5.2.4.5 <8>[ 11.331410] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-883360/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-883360/1/../bin/lava-test-case <8>[ 11.473140] /lava-883360/1/../bin/lava-test-case <8>[ 11.575241] /lava-883360/1/../bin/lava-test-case <8>[ 11.630878] /lava-883360/1/../bin/lava-test-case <8>[ 11.744710] /lava-883360/1/../bin/lava-test-case <8>[ 11.835929] /lava-883360/1/../bin/lava-test-case <8>[ 11.907994] /lava-883360/1/../bin/lava-test-case <8>[ 11.998464] /lava-883360/1/../bin/lava-test-case <8>[ 12.087941] /lava-883360/1/../bin/lava-test-case <8>[ 12.160289] /lava-883360/1/../bin/lava-test-case <8>[ 12.250425] /lava-883360/1/../bin/lava-test-case <8>[ 12.356388] /lava-883360/1/../bin/lava-test-case <8>[ 12.447921] /lava-883360/1/../bin/lava-test-case <8>[ 12.517959] /lava-883360/1/../bin/lava-test-case <8>[ 12.573146] /lava-883360/1/../bin/lava-test-case <8>[ 12.644651] /lava-883360/1/../bin/lava-test-case <8>[ 12.733827] /lava-883360/1/../bin/lava-test-case <8>[ 12.806568] /lava-883360/1/../bin/lava-test-case <8>[ 13.938098] /lava-883360/1/../bin/lava-test-case <8>[ 15.068011] /lava-883360/1/../bin/lava-test-case <8>[ 15.139493] /lava-883360/1/../bin/lava-test-case <8>[ 15.231410] /lava-883360/1/../bin/lava-test-case <8>[ 15.322697] /lava-883360/1/../bin/lava-test-case <8>[ 15.395425] /lava-883360/1/../bin/lava-test-case <8>[ 15.487707] /lava-883360/1/../bin/lava-test-case <8>[ 15.559942] /lava-883360/1/../bin/lava-test-case <8>[ 15.651700] /lava-883360/1/../bin/lava-test-case <8>[ 16.760264] /lava-883360/1/../bin/lava-test-case <8>[ 17.869804] /lava-883360/1/../bin/lava-test-case <8>[ 18.979963] /lava-883360/1/../bin/lava-test-case <8>[ 20.089883] /lava-883360/1/../bin/lava-test-case <8>[ 20.163029] /lava-883360/1/../bin/lava-test-case <8>[ 20.253690] /lava-883360/1/../bin/lava-test-case <8>[ 21.360284] /lava-883360/1/../bin/lava-test-case <8>[ 22.469802] /lava-883360/1/../bin/lava-test-case <8>[ 22.541580] /lava-883360/1/../bin/lava-test-case <8>[ 22.632657] /lava-883360/1/../bin/lava-test-case <8>[ 23.740081] /lava-883360/1/../bin/lava-test-case <8>[ 24.849924] /lava-883360/1/../bin/lava-test-case <8>[ 24.922288] /lava-883360/1/../bin/lava-test-case <8>[ 25.013384] /lava-883360/1/../bin/lava-test-case <8>[ 25.084898] /lava-883360/1/../bin/lava-test-case <8>[ 25.177749] /lava-883360/1/../bin/lava-test-case <8>[ 25.248428] /lava-883360/1/../bin/lava-test-case <8>[ 25.338566] /lava-883360/1/../bin/lava-test-case <8>[ 25.410337] /lava-883360/1/../bin/lava-test-case <8>[ 25.499972] /lava-883360/1/../bin/lava-test-case <8>[ 25.571850] /lava-883360/1/../bin/lava-test-case <8>[ 25.663035] /lava-883360/1/../bin/lava-test-case <8>[ 25.734033] /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: line 84: assert_device-present: not found /lava-883360/1/../bin/lava-test-case <8>[ 25.808664] /lava-883360/1/../bin/lava-test-case <8>[ 25.898692] /lava-883360/1/../bin/lava-test-case <8>[ 25.984679] + set +x<8>[ 26.010843] / #