Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2018.03-mx6+g9879e5c (Jun 27 2019 - 15:24:32 +0000) Part number: VSM-DT6-302 Assembly: AS170013251 Date of production: 2017Aug20 Trying to boot from MMC1 MMC Boot Device: mmc0 (SD) U-Boot 2018.03-mx6+g9879e5c (Jun 27 2019 - 15:24:32 +0000) CPU: Freescale i.MX6Q rev1.3 at 792MHz CPU: Extended Commercial temperature grade (-20C to 105C) at 32C Reset cause: POR Board: Variscite DART-MX6 I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK auto-detected panel VAR-WVGA Display: VAR-WVGA (800x480) In: serial Out: serial Err: serial switch to partitions #0, OK mmc0 is current device eMMC: 7.3 GiB Net: using phy at 7 got MAC0 address from fuse: f8:dc:7a:10:9b:1e FEC [PRIME] Normal Boot Hit any key to stop autoboot: 10  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 10.201.4.154 (258 ms) => setenv serverip 10.201.1.11 setenv serverip 10.201.1.11 => tftp 0x12000000 2133504/tftp-deploy-rfgzmzgz/kernel/zImage tftp 0x12000000 2133504/tftp-deploy-rfgzmzgz/kernel/zImage Using FEC device TFTP from server 10.201.1.11; our IP address is 10.201.4.154 Filename '2133504/tftp-deploy-rfgzmzgz/kernel/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######### 3.1 MiB/s done Bytes transferred = 9667072 (938200 hex) => tftp 0x18100000 2133504/tftp-deploy-rfgzmzgz/ramdisk/ramdisk.cpio.gz.uboot tftp 0x18100000 2133504/tftp-deploy-rfgzmzgz/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 10.201.1.11; our IP address is 10.201.4.154 Filename '2133504/tftp-deploy-rfgzmzgz/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x18100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 3.1 MiB/s done Bytes transferred = 16045435 (f4d57b hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x18000000 2133504/tftp-deploy-rfgzmzgz/dtb/imx6q-var-dt6customboard.dtb tftp 0x18000000 2133504/tftp-deploy-rfgzmzgz/dtb/imx6q-var-dt6customboard.dtb Using FEC device TFTP from server 10.201.1.11; our IP address is 10.201.4.154 Filename '2133504/tftp-deploy-rfgzmzgz/dtb/imx6q-var-dt6customboard.dtb'. Load address: 0x18000000 Loading: *### 2.6 MiB/s done Bytes transferred = 41057 (a061 hex) => setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x12000000 0x18100000 0x18000000 bootz 0x12000000 0x18100000 0x18000000 ## Loading init Ramdisk from Legacy Image at 18100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 16045371 Bytes = 15.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800d060 switch to ldo_bypass mode! Starting kernel ... <6>[ 0.000000] Booting Linux on physical CPU 0x0 <5>[ 0.000000] Linux version 5.10.125-cip10 (KernelCI@build-j267381-arm-gcc-10-multi-v7-defconfig-6sf9n) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Jun 28 03:13:53 UTC 2022 <6>[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d <6>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache <6>[ 0.000000] OF: fdt: Machine model: Variscite DART-MX6 Carrier-board <4>[ 0.000000] Malformed early option 'earlycon' <6>[ 0.000000] Memory policy: Data cache writealloc <6>[ 0.000000] efi: UEFI not found. <6>[ 0.000000] cma: Reserved 64 MiB at 0x4c000000 <6>[ 0.000000] Zone ranges: <6>[ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] <6>[ 0.000000] Normal empty <6>[ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] <6>[ 0.000000] Movable zone start for each node <6>[ 0.000000] Early memory node ranges <6>[ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] <6>[ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] <6>[ 0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920 <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 <5>[ 0.000000] Kernel command line: console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 933724K/1048576K available (13312K kernel code, 2230K rwdata, 5340K rodata, 2048K init, 425K bss, 49316K reserved, 65536K cma-reserved, 196608K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 errata 752271 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 <4>[ 0.000000] ccm: ldb_di0_sel already changed from reset value: 1 <4>[ 0.000000] ccm: ldb_di1_sel already changed from reset value: 1 <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.000029] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.004075] Console: colour dummy device 80x30 <6>[ 0.004132] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.004153] pid_max: default: 32768 minimum: 301 <6>[ 0.004350] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.004379] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.005069] CPU: Testing write buffer coherency: ok <6>[ 0.005110] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.005396] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.006166] Setting up static identity map for 0x10300000 - 0x103000ac <6>[ 0.007827] rcu: Hierarchical SRCU implementation. <6>[ 0.011595] EFI services will not be available. <6>[ 0.011946] smp: Bringing up secondary CPUs ... <6>[ 0.012847] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.012856] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.013881] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 <6>[ 0.013890] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.014886] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 <6>[ 0.014893] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.015027] smp: Brought up 1 node, 4 CPUs <6>[ 0.015042] SMP: Total of 4 processors activated (24.00 BogoMIPS). <6>[ 0.015054] CPU: All CPU(s) started in SVC mode. <6>[ 0.015701] devtmpfs: initialized <6>[ 0.023026] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.023288] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.023317] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.026711] pinctrl core: initialized pinctrl subsystem <6>[ 0.028736] DMI not present or invalid. <6>[ 0.029699] NET: Registered protocol family 16 <6>[ 0.033605] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.036050] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.036257] cpuidle: using governor menu <6>[ 0.036441] CPU identified as i.MX6Q, silicon rev 1.5 <6>[ 0.186928] vdd1p1: supplied by regulator-dummy <6>[ 0.193852] vdd3p0: supplied by regulator-dummy <6>[ 0.200659] vdd2p5: supplied by regulator-dummy <3>[ 0.207467] vddarm: bypassed regulator has no supply! <3>[ 0.207483] vddarm: failed to get the current voltage: -EPROBE_DEFER <3>[ 0.220914] vddsoc: bypassed regulator has no supply! <3>[ 0.220927] vddsoc: failed to get the current voltage: -EPROBE_DEFER <6>[ 0.545481] No ATAGs? <6>[ 0.545641] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.545654] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.549654] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver <6>[ 0.555336] Serial: AMBA PL011 UART driver <6>[ 0.585855] mxs-dma 110000.dma-apbh: initialized <6>[ 0.591987] iommu: Default domain type: Translated <6>[ 0.592264] vgaarb: loaded <5>[ 0.593127] SCSI subsystem initialized <6>[ 0.593665] usbcore: registered new interface driver usbfs <6>[ 0.593720] usbcore: registered new interface driver hub <6>[ 0.593778] usbcore: registered new device driver usb <6>[ 0.595071] i2c i2c-0: IMX I2C adapter registered <6>[ 0.598809] i2c i2c-1: IMX I2C adapter registered <6>[ 0.599964] i2c i2c-2: IMX I2C adapter registered <6>[ 0.601334] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.601347] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.601371] PTP clock support registered <6>[ 0.605288] clocksource: Switched to clocksource mxc_timer1 <6>[ 1.661190] NET: Registered protocol family 2 <6>[ 1.661767] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 1.663009] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 1.663059] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 1.663166] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 1.663341] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 1.663624] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.663685] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 1.663901] NET: Registered protocol family 1 <6>[ 1.664574] RPC: Registered named UNIX socket transport module. <6>[ 1.664589] RPC: Registered udp transport module. <6>[ 1.664597] RPC: Registered tcp transport module. <6>[ 1.664607] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.664624] PCI: CLS 0 bytes, default 64 <6>[ 1.665219] Trying to unpack rootfs image as initramfs... <6>[ 3.065541] Freeing initrd memory: 15672K <4>[ 3.066120] hw perfevents: no interrupt-affinity property for /pmu, guessing. <6>[ 3.066681] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available <5>[ 3.068666] Initialise system trusted keyrings <6>[ 3.069045] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 3.075083] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 3.075949] NFS: Registering the id_resolver key type <5>[ 3.076015] Key type id_resolver registered <5>[ 3.076029] Key type id_legacy registered <6>[ 3.076136] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 3.076150] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 3.076189] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 3.076685] Key type asymmetric registered <5>[ 3.076698] Asymmetric key parser 'x509' registered <6>[ 3.076763] bounce: pool size: 64 pages <6>[ 3.076807] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 3.076823] io scheduler mq-deadline registered <6>[ 3.076833] io scheduler kyber registered <4>[ 3.101719] pwm-backlight backlight: supply power not found, using dummy regulator <4>[ 3.128445] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 <6>[ 3.128470] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware <6>[ 3.175438] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 3.179995] SuperH (H)SCI(F) driver initialized <6>[ 3.181067] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 33, base_baud = 5000000) is a IMX <6>[ 4.042046] printk: console [ttymxc0] enabled <6>[ 4.048094] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 77, base_baud = 5000000) is a IMX <6>[ 4.057173] serial serial0: tty port ttymxc1 registered <6>[ 4.063224] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 78, base_baud = 5000000) is a IMX <6>[ 4.073639] msm_serial: driver initialized <6>[ 4.078302] STMicroelectronics ASC driver initialized <6>[ 4.085596] STM32 USART driver initialized <6>[ 4.109732] brd: module loaded <6>[ 4.124621] loop: module loaded <6>[ 4.143762] CAN device driver interface <6>[ 4.149173] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 4.159335] pps pps0: new PPS source ptp0 <6>[ 4.197246] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 4.204881] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 4.210158] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 4.216435] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 4.222100] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 4.233789] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 4.241531] usbcore: registered new interface driver pegasus <6>[ 4.247519] usbcore: registered new interface driver asix <6>[ 4.253214] usbcore: registered new interface driver ax88179_178a <6>[ 4.259633] usbcore: registered new interface driver cdc_ether <6>[ 4.265796] usbcore: registered new interface driver smsc75xx <6>[ 4.271846] usbcore: registered new interface driver smsc95xx <6>[ 4.277913] usbcore: registered new interface driver net1080 <6>[ 4.283866] usbcore: registered new interface driver cdc_subset <6>[ 4.290100] usbcore: registered new interface driver zaurus <6>[ 4.296039] usbcore: registered new interface driver cdc_ncm <6>[ 4.305456] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 4.312251] ehci-pci: EHCI PCI platform driver <6>[ 4.317030] ehci-platform: EHCI generic platform driver <6>[ 4.322796] ehci-orion: EHCI orion driver <6>[ 4.327307] SPEAr-ehci: EHCI SPEAr driver <6>[ 4.331753] ehci-st: EHCI STMicroelectronics driver <6>[ 4.337106] ehci-exynos: EHCI Exynos driver <6>[ 4.341725] ehci-atmel: EHCI Atmel driver <6>[ 4.346192] tegra-ehci: Tegra EHCI driver <6>[ 4.350670] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 4.357157] ohci-pci: OHCI PCI platform driver <6>[ 4.361910] ohci-platform: OHCI generic platform driver <6>[ 4.367666] SPEAr-ohci: OHCI SPEAr driver <6>[ 4.372114] ohci-st: OHCI STMicroelectronics driver <6>[ 4.377455] ohci-atmel: OHCI Atmel driver <6>[ 4.382772] usbcore: registered new interface driver usb-storage <4>[ 4.396549] rtc-ds1307 2-0068: SET TIME! <6>[ 4.403927] rtc-ds1307 2-0068: registered as rtc0 <6>[ 4.410387] rtc-ds1307 2-0068: setting system clock to 2000-01-01T00:00:19 UTC (946684819) <6>[ 4.421613] i2c /dev entries driver <6>[ 4.444552] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.451027] sdhci: Copyright(c) Pierre Ossman <6>[ 4.458266] Synopsys Designware Multimedia Card Interface Driver <6>[ 4.466421] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 4.475513] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO <6>[ 4.480900] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 4.488232] usbcore: registered new interface driver usbhid <6>[ 4.494072] usbhid: USB HID core driver <6>[ 4.504647] NET: Registered protocol family 10 <6>[ 4.507130] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA <6>[ 4.510468] Segment Routing with IPv6 <6>[ 4.512438] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA <6>[ 4.527676] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.534504] NET: Registered protocol family 17 <6>[ 4.539259] can: controller area network core <6>[ 4.543977] NET: Registered protocol family 29 <6>[ 4.548717] can: raw protocol <4>[ 4.549811] mmc1: host does not support reading read-only switch, assuming write-enable <6>[ 4.551959] can: broadcast manager protocol <6>[ 4.564694] can: netlink gateway - max_hops=1 <6>[ 4.566385] mmc1: new high speed SDHC card at address aaaa <5>[ 4.569819] Key type dns_resolver registered <6>[ 4.576183] mmcblk1: mmc1:aaaa SL16G 14.8 GiB <6>[ 4.584596] mmc2: new DDR MMC card at address 0001 <6>[ 4.585906] ThumbEE CPU extension supported. <6>[ 4.590896] mmcblk2: mmc2:0001 8GME4R 7.28 GiB <6>[ 4.591281] mmcblk1: p1 p2 <5>[ 4.594208] Registering SWP/SWPB emulation handler <6>[ 4.595186] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA <6>[ 4.599907] mmcblk2boot0: mmc2:0001 8GME4R partition 1 4.00 MiB <4>[ 4.601322] sdhci-esdhc-imx 2190000.mmc: card claims to support voltages below defined range <5>[ 4.602400] Loading compiled-in X.509 certificates <6>[ 4.607972] mmcblk2boot1: mmc2:0001 8GME4R partition 2 4.00 MiB <6>[ 4.616686] mmc0: new high speed SDIO card at address 0001 <6>[ 4.621075] mmcblk2rpmb: mmc2:0001 8GME4R partition 3 512 KiB, chardev (235:0) <3>[ 4.642123] vddarm: bypassed regulator has no supply! <6>[ 4.649651] mmcblk2: p1 p2 <3>[ 4.653899] vddarm: failed to get the current voltage: -EPROBE_DEFER <3>[ 4.671673] vddsoc: bypassed regulator has no supply! <3>[ 4.677037] vddsoc: failed to get the current voltage: -EPROBE_DEFER <4>[ 4.686283] pwm-backlight backlight: supply power not found, using dummy regulator <4>[ 4.706351] imx_usb 2184200.usb: No over current polarity defined <6>[ 4.716981] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 4.722154] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 4.755178] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 4.761627] hub 1-0:1.0: USB hub found <6>[ 4.765728] hub 1-0:1.0: 1 port detected <3>[ 4.773597] vddarm: bypassed regulator has no supply! <3>[ 4.778956] vddarm: failed to get the current voltage: -EPROBE_DEFER <3>[ 4.787565] vddsoc: bypassed regulator has no supply! <3>[ 4.792886] vddsoc: failed to get the current voltage: -EPROBE_DEFER <4>[ 4.801840] pwm-backlight backlight: supply power not found, using dummy regulator <3>[ 4.815000] vddarm: bypassed regulator has no supply! <3>[ 4.820370] vddarm: failed to get the current voltage: -EPROBE_DEFER <3>[ 4.828849] vddsoc: bypassed regulator has no supply! <3>[ 4.834170] vddsoc: failed to get the current voltage: -EPROBE_DEFER <4>[ 4.843036] pwm-backlight backlight: supply power not found, using dummy regulator <6>[ 4.855562] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <3>[ 4.866261] vddarm: bypassed regulator has no supply! <3>[ 4.871585] vddarm: failed to get the current voltage: -EPROBE_DEFER <3>[ 4.880196] vddsoc: bypassed regulator has no supply! <3>[ 4.885557] vddsoc: failed to get the current voltage: -EPROBE_DEFER <4>[ 4.894453] pwm-backlight backlight: supply power not found, using dummy regulator <6>[ 4.988930] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:07: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:07, irq=POLL) <6>[ 12.325607] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx <6>[ 12.333569] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 12.355165] Sending DHCP requests ., OK <6>[ 12.399301] IP-Config: Got DHCP answer from 10.201.1.3, my address is 10.201.4.154 <6>[ 12.407169] IP-Config: Complete: <6>[ 12.410670] device=eth0, hwaddr=f8:dc:7a:10:9b:1e, ipaddr=10.201.4.154, mask=255.255.0.0, gw=10.201.1.3 <6>[ 12.420779] host=10.201.4.154, domain=, nis-domain=(none) <6>[ 12.426890] bootserver=10.201.1.3, rootserver=10.201.1.3, rootpath= <6>[ 12.426896] nameserver0=10.1.1.1 <6>[ 12.445889] Freeing unused kernel memory: 2048K <6>[ 12.485747] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 12.615976] udevd[123]: starting version 3.2.9 <5>[ 12.621811] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 12.628875] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 12.635833] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 12.651478] udevd[123]: specified user 'tss' unknown <27>[ 12.656978] udevd[123]: specified group 'tss' unknown <30>[ 12.665313] udevd[124]: starting eudev-3.2.9 <6>[ 13.076580] imx-ipuv3 2400000.ipu: IPUv3H probed <6>[ 13.083975] imx-ipuv3 2800000.ipu: IPUv3H probed <3>[ 13.092372] vddarm: bypassed regulator has no supply! <3>[ 13.097730] vddarm: failed to get the current voltage: -EPROBE_DEFER <3>[ 13.106969] vddsoc: bypassed regulator has no supply! <3>[ 13.112299] vddsoc: failed to get the current voltage: -EPROBE_DEFER <4>[ 13.121721] pwm-backlight backlight: supply power not found, using dummy regulator <3>[ 13.173000] vddarm: bypassed regulator has no supply! <6>[ 13.177883] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) <3>[ 13.178394] vddarm: failed to get the current voltage: -EPROBE_DEFER <6>[ 13.186983] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) <6>[ 13.202164] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) <6>[ 13.210881] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) <6>[ 13.219650] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) <4>[ 13.262337] etnaviv-gpu 130000.gpu: deferred probe timeout, ignoring dependency <4>[ 13.270030] etnaviv-gpu: probe of 130000.gpu failed with error -110 <4>[ 13.276699] etnaviv-gpu 134000.gpu: deferred probe timeout, ignoring dependency <4>[ 13.284297] etnaviv-gpu: probe of 134000.gpu failed with error -110 <4>[ 13.291129] etnaviv-gpu 2204000.gpu: deferred probe timeout, ignoring dependency <4>[ 13.298847] etnaviv-gpu: probe of 2204000.gpu failed with error -110 <6>[ 13.305080] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) <4>[ 13.318063] ------------[ cut here ]------------ <4>[ 13.322985] WARNING: CPU: 1 PID: 142 at drivers/gpu/drm/drm_bridge.c:237 drm_encoder_cleanup+0x24/0x84 <3>[ 13.328072] vddsoc: bypassed regulator has no supply! <4>[ 13.332647] Modules linked in: flexcan etnaviv(+) gpu_sched dw_hdmi_imx(+) dw_hdmi <3>[ 13.337924] vddsoc: failed to get the current voltage: -EPROBE_DEFER <4>[ 13.340919] pwm-backlight backlight: supply power not found, using dummy regulator <4>[ 13.345797] imx_ldb imxdrm imx_ipu_v3 <4>[ 13.364329] CPU: 1 PID: 142 Comm: udevd Not tainted 5.10.125-cip10 #1 <4>[ 13.371043] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) <4>[ 13.377885] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) <4>[ 13.385914] [] (show_stack) from [] (dump_stack+0xc0/0xd4) <4>[ 13.393414] [] (dump_stack) from [] (__warn+0xec/0x148) <4>[ 13.400660] [] (__warn) from [] (warn_slowpath_fmt+0x64/0xbc) <3>[ 13.401369] vddarm: bypassed regulator has no supply! <4>[ 13.408430] [] (warn_slowpath_fmt) from [] (drm_encoder_cleanup+0x24/0x84) <4>[ 13.408449] [] (drm_encoder_cleanup) from [] (drm_mode_config_cleanup+0x48/0x304) <4>[ 13.408474] [] (drm_mode_config_cleanup) from [] (drm_managed_release+0x80/0xd4) <3>[ 13.413777] vddarm: failed to get the current voltage: -EPROBE_DEFER <4>[ 13.422651] [] (drm_managed_release) from [] (drm_dev_put+0x6c/0x78) <4>[ 13.422680] [] (drm_dev_put) from [] (imx_drm_bind+0x74/0x124 [imxdrm]) <4>[ 13.422712] [] (imx_drm_bind [imxdrm]) from [] (try_to_bring_up_master+0x160/0x1ac) <4>[ 13.474790] [] (try_to_bring_up_master) from [] (__component_add+0x98/0x13c) <4>[ 13.483854] [] (__component_add) from [] (platform_drv_probe+0x48/0x98) <6>[ 13.484655] caam 2100000.crypto: Entropy delay = 3200 <4>[ 13.492487] [] (platform_drv_probe) from [] (really_probe+0xf0/0x49c) <4>[ 13.492503] [] (really_probe) from [] (driver_probe_device+0x5c/0xb4) <4>[ 13.492524] [] (driver_probe_device) from [] (device_driver_attach+0xa8/0xb0) <4>[ 13.523837] [] (device_driver_attach) from [] (__driver_attach+0x80/0x110) <4>[ 13.532722] [] (__driver_attach) from [] (bus_for_each_dev+0x78/0xb8) <4>[ 13.541175] [] (bus_for_each_dev) from [] (bus_add_driver+0xfc/0x1ec) <4>[ 13.549628] [] (bus_add_driver) from [] (driver_register+0x88/0x118) <4>[ 13.557997] [] (driver_register) from [] (do_one_initcall+0x50/0x240) <6>[ 13.558636] caam 2100000.crypto: Instantiated RNG4 SH0 <4>[ 13.566451] [] (do_one_initcall) from [] (do_init_module+0x44/0x244) <4>[ 13.566472] [] (do_init_module) from [] (sys_finit_module+0xbc/0xe8) <4>[ 13.588566] [] (sys_finit_module) from [] (ret_fast_syscall+0x0/0x54) <4>[ 13.597010] Exception stack(0xc3bcbfa8 to 0xc3bcbff0) <4>[ 13.602329] bfa0: 00020000 00000000 00000009 b6f3cbc1 00000000 00058330 <4>[ 13.610776] bfc0: 00020000 00000000 00000000 0000017b 00065d68 00058330 00000000 00020000 <4>[ 13.619219] bfe0: beb02958 beb02948 b6f3659c b6c9c830 <6>[ 13.619396] caam 2100000.crypto: Instantiated RNG4 SH1 <4>[ 13.624687] ---[ end trace 5db7a47f310b6ab4 ]--- <6>[ 13.630013] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) <6>[ 13.641787] caam 2100000.crypto: job rings = 2, qi = 0 <3>[ 13.656054] vddsoc: bypassed regulator has no supply! <3>[ 13.661389] vddsoc: failed to get t# he current voltage: -EPROBE_DEFER <4>[ 13.671043] pwm-backlight backlight: supply power not found, using dummy regulator <3>[ 13.701844] vddarm: bypassed regulator has no supply! <3>[ 13.707242] vddarm: failed to get the current voltage: -EPROBE_DEFER # <6>[ 13.778031] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) <6>[ 13.786599] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) <6>[ 13.795229] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) <6>[ 13.803762] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) <6>[ 13.812579] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) <6>[ 13.825137] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_platform_driver_exit [dw_hdmi_imx]) <3>[ 13.836970] vddsoc: bypassed regulator has no supply! <3>[ 13.842299] vddsoc: failed to get the current voltage: -EPROBE_DEFER <4>[ 13.902599] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator <4>[ 13.910848] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests <4>[ 13.919625] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator <4>[ 13.927827] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests <4>[ 13.938959] pwm-backlight backlight: supply power not found, using dummy regulator <3>[ 13.955962] vddarm: bypassed regulator has no supply! <3>[ 13.961309] vddarm: failed to get the current voltage: -EPROBE_DEFER <6>[ 13.982797] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) <6>[ 13.991491] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) <6>[ 14.000197] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) <6>[ 14.008875] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) <6>[ 14.017727] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) <6>[ 14.029757] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_platform_driver_exit [dw_hdmi_imx]) <4>[ 14.041372] ------------[ cut here ]------------ <4>[ 14.046388] WARNING: CPU: 1 PID: 93 at drivers/gpu/drm/drm_bridge.c:237 drm_encoder_cleanup+0x24/0x84 <4>[ 14.055991] Modules linked in: snd_soc_simple_card snd_soc_simple_card_utils snd_soc_core ac97_bus snd_pcm_dmaengine snd_pcm snd_timer snd soundcore phy_generic caam error flexcan etnaviv gpu_sched dw_hdmi_imx dw_hdmi imx_ldb imxdrm imx_ipu_v3 <4>[ 14.078005] CPU: 1 PID: 93 Comm: kworker/1:5 Tainted: G W 5.10.125-cip10 #1 <4>[ 14.086545] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) <4>[ 14.093367] Workqueue: events deferred_probe_work_func <4>[ 14.098833] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) <4>[ 14.106872] [] (show_stack) from [] (dump_stack+0xc0/0xd4) <4>[ 14.114402] [] (dump_stack) from [] (__warn+0xec/0x148) <4>[ 14.121680] [] (__warn) from [] (warn_slowpath_fmt+0x64/0xbc) <4>[ 14.129482] [] (warn_slowpath_fmt) from [] (drm_encoder_cleanup+0x24/0x84) <4>[ 14.138381] [] (drm_encoder_cleanup) from [] (drm_mode_config_cleanup+0x48/0x304) <4>[ 14.147963] [] (drm_mode_config_cleanup) from [] (drm_managed_release+0x80/0xd4) <4>[ 14.157411] [] (drm_managed_release) from [] (drm_dev_put+0x6c/0x78) <4>[ 14.165796] [] (drm_dev_put) from [] (imx_drm_bind+0x74/0x124 [imxdrm]) <4>[ 14.174428] [] (imx_drm_bind [imxdrm]) from [] (try_to_bring_up_master+0x160/0x1ac) <4>[ 14.184095] [] (try_to_bring_up_master) from [] (__component_add+0x98/0x13c) <4>[ 14.193156] [] (__component_add) from [] (platform_drv_probe+0x48/0x98) <4>[ 14.201786] [] (platform_drv_probe) from [] (really_probe+0xf0/0x49c) <4>[ 14.210238] [] (really_probe) from [] (driver_probe_device+0x5c/0xb4) <4>[ 14.218690] [] (driver_probe_device) from [] (bus_for_each_drv+0x84/0xc8) <4>[ 14.227486] [] (bus_for_each_drv) from [] (__device_attach+0xb0/0x1d8) <4>[ 14.236023] [] (__device_attach) from [] (bus_probe_device+0x84/0x8c) <4>[ 14.244473] [] (bus_probe_device) from [] (deferred_probe_work_func+0x78/0xa4) <4>[ 14.253711] [] (deferred_probe_work_func) from [] (process_one_work+0x1ec/0x548) <4>[ 14.263118] [] (process_one_work) from [] (worker_thread+0x64/0x5a8) <4>[ 14.271485] [] (worker_thread) from [] (kthread+0x14c/0x150) <4>[ 14.279155] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 14.286642] Exception stack(0xc372bfb0 to 0xc372bff8) <4>[ 14.291961] bfa0: 00000000 00000000 00000000 00000000 <4>[ 14.300405] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 14.308848] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 14.315832] ---[ end trace 5db7a47f310b6ab5 ]--- <3>[ 14.321394] vddsoc: bypassed regulator h# as no supply! <3>[ 14.326781] vddsoc: failed to get the current voltage: -EPROBE_DEFER <4>[ 14.336629] pwm-backlight backlight: supply power not found, using dummy regulator <3>[ 14.351775] vddarm: bypassed regulator has no supply! <3>[ 14.357211] vddarm: failed to get the current voltage: -EPROBE_DEFER <6>[ 14.378705] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) <6>[ 14.387290] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) #<6>[ 14.395937] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) <6>[ 14.404483] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) <6>[ 14.413268] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) <6>[ 14.425019] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_platform_driver_exit [dw_hdmi_imx]) <4>[ 14.437896] ------------[ cut here ]------------ <4>[ 14.442843] WARNING: CPU: 1 PID: 93 at drivers/gpu/drm/drm_bridge.c:237 drm_encoder_cleanup+0x24/0x84 <4>[ 14.452421] Modules linked in: snd_soc_simple_card snd_soc_simple_card_utils snd_soc_core ac97_bus snd_pcm_dmaengine snd_pcm snd_timer snd soundcore phy_generic caam error flexcan etnaviv gpu_sched dw_hdmi_imx dw_hdmi imx_ldb imxdrm imx_ipu_v3 <4>[ 14.474434] CPU: 1 PID: 93 Comm: kworker/1:5 Tainted: G W 5.10.125-cip10 #1 <4>[ 14.482975] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) <4>[ 14.489794] Workqueue: events deferred_probe_work_func <4>[ 14.495240] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) <4>[ 14.503263] [] (show_stack) from [] (dump_stack+0xc0/0xd4) <4>[ 14.510762] [] (dump_stack) from [] (__warn+0xec/0x148) <4>[ 14.518007] [] (__warn) from [] (warn_slowpath_fmt+0x64/0xbc) <4>[ 14.525775] [] (warn_slowpath_fmt) from [] (drm_encoder_cleanup+0x24/0x84) <4>[ 14.534664] [] (drm_encoder_cleanup) from [] (drm_mode_config_cleanup+0x48/0x304) <4>[ 14.544161] [] (drm_mode_config_cleanup) from [] (drm_managed_release+0x80/0xd4) <4>[ 14.553567] [] (drm_managed_release) from [] (drm_dev_put+0x6c/0x78) <4>[ 14.561943] [] (drm_dev_put) from [] (imx_drm_bind+0x74/0x124 [imxdrm]) <4>[ 14.570571] [] (imx_drm_bind [imxdrm]) from [] (try_to_bring_up_master+0x160/0x1ac) <4>[ 14.580237] [] (try_to_bring_up_master) from [] (__component_add+0x98/0x13c) <4>[ 14.589296] [] (__component_add) from [] (platform_drv_probe+0x48/0x98) <4>[ 14.597923] [] (platform_drv_probe) from [] (really_probe+0xf0/0x49c) <4>[ 14.606374] [] (really_probe) from [] (driver_probe_device+0x5c/0xb4) <4>[ 14.614824] [] (driver_probe_device) from [] (bus_for_each_drv+0x84/0xc8) <4>[ 14.623622] [] (bus_for_each_drv) from [] (__device_attach+0xb0/0x1d8) <4>[ 14.632158] [] (__device_attach) from [] (bus_probe_device+0x84/0x8c) <4>[ 14.640606] [] (bus_probe_device) from [] (deferred_probe_work_func+0x78/0xa4) <4>[ 14.649844] [] (deferred_probe_work_func) from [] (process_one_work+0x1ec/0x548) <4>[ 14.659247] [] (process_one_work) from [] (worker_thread+0x64/0x5a8) <4>[ 14.667611] [] (worker_thread) from [] (kthread+0x14c/0x150) <4>[ 14.675283] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 14.682771] Exception stack(0xc372bfb0 to 0xc372bff8) <4>[ 14.688089] bfa0: 00000000 00000000 00000000 00000000 <4>[ 14.696532] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 14.704974] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 14.711930] ---[ end trace 5db7a47f310b6ab6 ]--- <3>[ 14.717179] Alignment trap: not handling instruction e1923f9f at [] <1>[ 14.724581] 8<--- cut here --- <1>[ 14.727903] Unhandled faul# t: alignment exception (0x001) at 0xcec60217 <1>[ 14.734696] pgd = (ptrval) <1>[ 14.737669] [cec60217] *pgd=1ec1141e(bad) <0>[ 14.741956] Internal error: : 1 [#1] SMP ARM <4>[ 14.746490] Modules linked in: caam_jr(+) caamhash_desc caamalg_desc crypto_engine libdes authenc snd_soc_simple_card snd_soc_simple_card_utils snd_soc_core ac97_bus snd_pcm_dmaengine snd_pcm snd_timer snd soundcore phy_generic caam error flexcan etnaviv gpu_sched dw_hdmi_imx dw_hdmi imx_ldb imxdrm imx_ipu_v3 <4>[ 14.774253] CPU: 1 PID: 75 Comm: kworker/1:3 Tainted: G W 5.10.125-cip10 #1 <4>[ 14.782782] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) <4>[ 14.789590] Workqueue: events drm_connector_free_work_fn <4>[ 14.795180] PC is at _raw_spin_lock_irqsave+0x14/0x4c #<4>[ 14.800591] LR is at ida_free+0x54/0x158 <4>[ 14.804779] pc : [] lr : [] psr: 60000093 <4>[ 14.811310] sp : c329beb0 ip : 00000000 fp : ef7aa380 <4>[ 14.816798] r10: 00000000 r9 : c1a1e420 r8 : 00000000 <4>[ 14.822288] r7 : c39af894 r6 : c329a000 r5 : 00000000 r4 : c39af840 <4>[ 14.829079] r3 : 00000000 r2 : cec60217 r1 : 00000000 r0 : 60000013 <4>[ 14.835874] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none <4>[ 14.843360] Control: 10c5387d Table: 13a4804a DAC: 00000051 <0>[ 14.849543] Process kworker/1:3 (pid: 75, stack limit = 0x(ptrval)) <0>[ 14.856075] Stack: (0xc329beb0 to 0xc329c000) <0>[ 14.860700] bea0: 1e9b10fe 6e2395fc c329a000 cec60217 <0>[ 14.869145] bec0: 00000000 00000000 00000003 00000000 00000000 6e2395fc c39af840 cec6008f <0>[ 14.877590] bee0: cec6020f c39af894 00000000 c09dc3dc fffffc84 c39af840 c3a6f400 c3a6f580 <0>[ 14.886034] bf00: 00000000 c1a1e420 00000000 c09dc6bc c3a6f5a0 c324fd80 ef7aa380 ef7ad600 <0>[ 14.894479] bf20: 00000000 c0361f28 c329a000 ef7aa380 ef7aa398 c324fd80 ef7aa380 c324fd94 <0>[ 14.902922] bf40: ef7aa398 c1803d00 00000008 c329a000 ef7aa380 c03624bc ffffe000 c1a1db03 <0>[ 14.911365] bf60: c324fd80 c224d200 c3250280 00000000 c329a000 c0362284 c324fd80 c212feb4 <0>[ 14.919982] bf80: c224d224 c0367d70 00000007 c3250280 c0367c24 00000000 00000000 00000000 <0>[ 14.928425] bfa0: 00000000 00000000 00000000 c03001a8 00000000 00000000 00000000 00000000 <0>[ 14.936868] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <0>[ 14.945312] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 <0>[ 14.953765] [] (_raw_spin_lock_irqsave) from [] (ida_free+0x54/0x158) <0>[ 14.962218] [] (ida_free) from [] (drm_connector_cleanup+0x130/0x270) <0>[ 14.970669] [] (drm_connector_cleanup) from [] (drm_connector_free_work_fn+0x7c/0x88) <0>[ 14.980514] [] (drm_connector_free_work_fn) from [] (process_one_work+0x1ec/0x548) <0>[ 14.990091] [] (process_one_work) from [] (worker_thread+0x238/0x5a8) <0>[ 14.998541] [] (worker_thread) from [] (kthread+0x14c/0x150) <0>[ 15.006210] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <0>[ 15.013696] Exception stack(0xc329bfb0 to 0xc329bff8) <0>[ 15.019012] bfa0: 00000000 00000000 00000000 00000000 <0>[ 15.027456] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <0>[ 15.035898] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 <0>[ 15.042781] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) <4>[ 15.049145] ---[ end trace 5db7a47f310b6ab7 ]--- udevadm settle failed done Saving random seed: <4>[ 43.120747] urandom_read_iter: 1 callbacks suppressed <5>[ 43.120755] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: <5>[ 43.220438] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # # / # ## export SHELL=/bin/sh / # # / # / # # / # export SHELL=/bin/sh. /lava-2133504/environment /lava-2133504/bin/lava-test-runner /lava-2133504/0 / # . /lava-2133504/environment / # /lava-2133504/bin/lava-test-runner /lava-2133504/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-2133504/0/tests/0_dmesg + cat uuid + UUID=2133504_1.5.2.4<8>[ 43.740304] .1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 43.789707] kern :alert : 8<--- cut here --- kern :alert : Unhandled fault: alignment exception (0x001) at 0xcec60217 kern :alert : pgd = (ptrval) kern :alert : [<8>[ 43.834627] cec60217] *pgd=1ec1141e(bad) kern :emerg : Internal error: : 1 [#1] SMP ARM kern :emerg : Process kworker/1:3 (pid: 75, stack limit = 0x(ptrval)) kern :emerg : Stack: (0xc329beb0 to<8>[ 43.882113] 0xc329c000) kern :emerg : bea0<8>[ 43.893439] : 1e9b10fe 6e2395fc c329a000 cec60217 kern :emerg : bec0: 00000000 00000000 00000003 00000000 00000000 6e2395fc c39af840 cec6008f kern :emerg : bee0: cec6020f c39af894 00000000 c09dc3dc fffffc84 c39af840 c3a6f400 c3a6f580 kern :emerg : bf00: 00000000 c1a1e420 00000000 c09dc6bc c3a6f5a0 c324fd80 ef7aa380 ef7ad600 kern :emerg : bf20: 00000000 c0361f28 c329a000 ef7aa380 ef7aa398 c324fd80 ef7aa380 c324fd94 kern :emerg : bf40: ef7aa398 c1803d00 00000008 c329a000 ef7aa380 c03624bc ffffe000 c1a1db03 kern :emerg : bf60: c324fd80 c224d200 c3250280 00000000 c329a000 c0362284 c324fd80 c212feb4 kern :emerg : bf80: c224d224 c0367d70 00000007 c3250280 c0367c24 00000000 00000000 00000000 kern :emerg : bfa0: 00000000 00000000 00000000 c03001a8 00000000 00000000 00000000 00000000 kern :emerg : bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 kern :emerg : bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 kern :emerg : [] (_raw_spin_lock_irqsave) from [] (ida_free+0x54/0x158) kern :emerg : [] (ida_free) from [] (drm_connector_cleanup+0x130/0x270) kern :emerg : [] (drm_connector_cleanup) from [] (drm_connector_free_work_fn+0x7c/0x88) kern :emerg : [] (drm_connector_free_work_fn) from [] (process_one_work+0x1ec/0x548) kern :emerg : [] (process_one_work) from [] (worker_thread+0x238/0x5a8) kern :emerg : [] (worker_thread) from [] (kthread+0x14c/0x150) kern :emerg : [] (kthread) from [] (ret_from_fork+0x14/0x2c) kern :emerg : Exception stack(0xc329bfb0 to 0xc329bff8) kern :emerg : bfa0: 00000000 00000000 00000000 00000000 kern :emerg : bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 kern :emerg : bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 kern :emerg : Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) + set +x / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-2133504/environment / # . /lava-2133504/environment/lava-2133504/bin/lava-test-runner /lava-2133504/1 / # /lava-2133504/bin/lava-test-runner /lava-2133504/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-2133504/1/tests/1_bootrr + cat uuid <8>[ 44.567539] + UUID=2133504_1.5.2.4.5 + set +x + export 'PATH=/opt/bootrr/helpers:/lava-2133504/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-2133504/1/../bin/lava-test-case <8>[ 45.614295] /lava-2133504/1/../bin/lava-test-case <8>[ 45.655790] /lava-2133504/1/../bin/lava-test-case <8>[ 45.682139] + set<8>[ 45.701896] +x / #