connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/951835/tftp-deploy-urc2hner/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/951835/tftp-deploy-urc2hner/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/951835/tftp-deploy-urc2hner/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/951835/tftp-deploy-urc2hner/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/951835/tftp-deploy-urc2hner/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/951835/tftp-deploy-urc2hner/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 3a:57:f5:07:de:ee T eth0: DHCP client bound to address 10.8.254.227 Loading ARM Linux zImage '/mnt/tftp/951835/tftp-deploy-urc2hner/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12e41000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/951835/tftp-deploy-urc2hner/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18f54c6d Loading devicetree from '/mnt/tftp/951835/tftp-deploy-urc2hner/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x12e41000, initrd at 0x18000000, oftree at 0x18f55000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.179-cip32 (KernelCI@build-j1513383-arm-gcc-10-multi-v7-defconfig-dn9tr) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue May 16 19:49:47 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1972000K/2097152K available (14336K kernel code, 2237K rwdata, 5348K rodata, 2048K init, 426K bss, 59616K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000027] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.004933] Console: colour dummy device 80x30 [ 0.004988] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.005006] pid_max: default: 32768 minimum: 301 [ 0.005200] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005225] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005890] CPU: Testing write buffer coherency: ok [ 0.005929] CPU0: Spectre v2: using BPIALL workaround [ 0.006204] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.006955] Setting up static identity map for 0x10300000 - 0x103000ac [ 0.008906] rcu: Hierarchical SRCU implementation. [ 0.013281] EFI services will not be available. [ 0.013598] smp: Bringing up secondary CPUs ... [ 0.014453] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.014460] CPU1: Spectre v2: using BPIALL workaround [ 0.015423] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.015430] CPU2: Spectre v2: using BPIALL workaround [ 0.016369] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.016377] CPU3: Spectre v2: using BPIALL workaround [ 0.016504] smp: Brought up 1 node, 4 CPUs [ 0.016518] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.016528] CPU: All CPU(s) started in SVC mode. [ 0.017168] devtmpfs: initialized [ 0.024307] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.024554] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.024578] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.027796] pinctrl core: initialized pinctrl subsystem [ 0.029822] DMI not present or invalid. [ 0.030655] NET: Registered protocol family 16 [ 0.033686] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.036284] thermal_sys: Registered thermal governor 'step_wise' [ 0.036466] cpuidle: using governor menu [ 0.036605] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.179142] vdd1p1: supplied by regulator-dummy [ 0.186148] vdd3p0: supplied by regulator-dummy [ 0.193121] vdd2p5: supplied by regulator-dummy [ 0.200120] vddarm: supplied by regulator-dummy [ 0.207220] vddpu: supplied by regulator-dummy [ 0.214029] vddsoc: supplied by regulator-dummy [ 0.565562] No ATAGs? [ 0.565715] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.565727] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.570263] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.576694] Serial: AMBA PL011 UART driver [ 0.607387] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.pinctrl; cannot claim for regulator-usbotgvbus [ 0.607408] imx6q-pinctrl 20e0000.pinctrl: pin-42 (regulator-usbotgvbus) status -22 [ 0.607423] imx6q-pinctrl 20e0000.pinctrl: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.pinctrl [ 0.607436] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.607457] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.611214] iommu: Default domain type: Translated [ 0.611505] vgaarb: loaded [ 0.612395] SCSI subsystem initialized [ 0.612882] usbcore: registered new interface driver usbfs [ 0.612937] usbcore: registered new interface driver hub [ 0.612994] usbcore: registered new device driver usb [ 0.614205] i2c i2c-0: IMX I2C adapter registered [ 0.615917] i2c i2c-1: IMX I2C adapter registered [ 0.617167] i2c i2c-2: IMX I2C adapter registered [ 0.618655] pps_core: LinuxPPS API ver. 1 registered [ 0.618669] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.618691] PTP clock support registered [ 0.622826] clocksource: Switched to clocksource mxc_timer1 [ 1.766955] NET: Registered protocol family 2 [ 1.767338] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.768490] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.768535] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.768619] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.768759] TCP: Hash tables configured (established 8192 bind 8192) [ 1.768942] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.768987] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.769163] NET: Registered protocol family 1 [ 1.769825] RPC: Registered named UNIX socket transport module. [ 1.769838] RPC: Registered udp transport module. [ 1.769848] RPC: Registered tcp transport module. [ 1.769857] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.769874] PCI: CLS 0 bytes, default 64 [ 1.770407] Trying to unpack rootfs image as initramfs... [ 3.132089] Freeing initrd memory: 15700K [ 3.132599] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 3.133017] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 3.134942] Initialise system trusted keyrings [ 3.135268] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 3.141214] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.141968] NFS: Registering the id_resolver key type [ 3.142030] Key type id_resolver registered [ 3.142040] Key type id_legacy registered [ 3.142149] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.142161] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 3.142201] ntfs: driver 2.1.32 [Flags: R/O]. [ 3.142667] Key type asymmetric registered [ 3.142753] Asymmetric key parser 'x509' registered [ 3.142818] bounce: pool size: 64 pages [ 3.142864] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 3.142877] io scheduler mq-deadline registered [ 3.142888] io scheduler kyber registered [ 3.183661] mxs-dma 110000.dma-apbh: initialized [ 3.189051] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 3.189073] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 3.252297] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 3.257107] SuperH (H)SCI(F) driver initialized [ 3.258122] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 33, base_baud = 5000000) is a IMX [ 4.093441] printk: console [ttymxc0] enabled [ 4.098966] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 77, base_baud = 5000000) is a IMX [ 4.109140] msm_serial: driver initialized [ 4.113568] STMicroelectronics ASC driver initialized [ 4.120738] STM32 USART driver initialized [ 4.145658] brd: module loaded [ 4.158272] loop: module loaded [ 4.165713] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 4.173688] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 4.181698] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 4.189897] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 4.197651] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 4.205143] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 4.212441] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 4.222783] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 4.229778] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 4.238602] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 4.249060] scsi host0: ahci-imx [ 4.252671] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 84 [ 4.273713] CAN device driver interface [ 4.278982] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 4.288396] pps pps0: new PPS source ptp0 [ 4.323544] fec 2188000.ethernet eth0: registered PHC device 0 [ 4.331112] e1000e: Intel(R) PRO/1000 Network Driver [ 4.336109] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.342099] igb: Intel(R) Gigabit Ethernet Network Driver [ 4.347530] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.359709] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 4.367182] usbcore: registered new interface driver pegasus [ 4.372912] usbcore: registered new interface driver asix [ 4.378350] usbcore: registered new interface driver ax88179_178a [ 4.384506] usbcore: registered new interface driver cdc_ether [ 4.390386] usbcore: registered new interface driver smsc75xx [ 4.396200] usbcore: registered new interface driver smsc95xx [ 4.401980] usbcore: registered new interface driver net1080 [ 4.407693] usbcore: registered new interface driver cdc_subset [ 4.413666] usbcore: registered new interface driver zaurus [ 4.419320] usbcore: registered new interface driver cdc_ncm [ 4.428822] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.435378] ehci-pci: EHCI PCI platform driver [ 4.439866] ehci-platform: EHCI generic platform driver [ 4.445435] ehci-orion: EHCI orion driver [ 4.449682] SPEAr-ehci: EHCI SPEAr driver [ 4.453932] ehci-st: EHCI STMicroelectronics driver [ 4.459010] ehci-exynos: EHCI Exynos driver [ 4.463421] ehci-atmel: EHCI Atmel driver [ 4.467610] tegra-ehci: Tegra EHCI driver [ 4.471840] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.478059] ohci-pci: OHCI PCI platform driver [ 4.482555] ohci-platform: OHCI generic platform driver [ 4.488095] SPEAr-ohci: OHCI SPEAr driver [ 4.492304] ohci-st: OHCI STMicroelectronics driver [ 4.497402] ohci-atmel: OHCI Atmel driver [ 4.502586] usbcore: registered new interface driver usb-storage [ 4.517183] i2c /dev entries driver [ 4.541142] sdhci: Secure Digital Host Controller Interface driver [ 4.547363] sdhci: Copyright(c) Pierre Ossman [ 4.554706] Synopsys Designware Multimedia Card Interface Driver [ 4.562785] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.573350] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 4.578673] ledtrig-cpu: registered to indicate activity on CPUs [ 4.585441] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 4.586004] usbcore: registered new interface driver usbhid [ 4.595684] ata1: SATA link down (SStatus 0 SControl 300) [ 4.596015] usbhid: USB HID core driver [ 4.601447] ahci-imx 2200000.sata: no device found, disabling link. [ 4.610350] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 4.610575] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 4.611527] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 4.612413] NET: Registered protocol family 10 [ 4.613683] Segment Routing with IPv6 [ 4.613770] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.614347] NET: Registered protocol family 17 [ 4.614361] can: controller area network core [ 4.614432] NET: Registered protocol family 29 [ 4.614439] can: raw protocol [ 4.614447] can: broadcast manager protocol [ 4.614458] can: netlink gateway - max_hops=1 [ 4.614889] Key type dns_resolver registered [ 4.620625] ThumbEE CPU extension supported. [ 4.650766] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 4.651028] Registering SWP/SWPB emulation handler [ 4.692841] Loading compiled-in X.509 certificates [ 4.722979] imx_usb 2184200.usb: No over current polarity defined [ 4.732611] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 4.737553] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 4.752627] mmc0: host does not support reading read-only switch, assuming write-enable [ 4.762899] mmc0: new high speed SDHC card at address 1234 [ 4.769287] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 4.772739] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 4.780083] hub 1-0:1.0: USB hub found [ 4.783943] hub 1-0:1.0: 1 port detected [ 4.790942] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 4.811991] Freeing unused kernel memory: 2048K [ 4.830137] mmc2: new DDR MMC card at address 0001 [ 4.835711] Run /init as init process [ 4.836441] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 4.844719] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 4.851506] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 4.857853] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (235:0) [ 4.868173] mmcblk2: p1 p2 Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 4.967677] udevd[126]: starting version 3.2.9 [ 4.973515] random: udevd: uninitialized urandom read (16 bytes read) [ 4.980323] random: udevd: uninitialized urandom read (16 bytes read) [ 4.987191] random: udevd: uninitialized urandom read (16 bytes read) [ 5.001220] udevd[126]: specified user 'tss' unknown [ 5.006513] udevd[126]: specified group 'tss' unknown [ 5.014082] udevd[127]: starting eudev-3.2.9 [ 5.082786] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 5.296051] hub 1-1:1.0: USB hub found [ 5.300590] hub 1-1:1.0: 4 ports detected [ 5.383256] imx-ipuv3 2400000.ipu: IPUv3H probed [ 5.390171] imx-ipuv3 2800000.ipu: IPUv3H probed [ 5.455974] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops imx_drm_exit [imxdrm]) [ 5.465162] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops imx_drm_exit [imxdrm]) [ 5.473706] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops imx_drm_exit [imxdrm]) [ 5.482138] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops imx_drm_exit [imxdrm]) [ 5.490627] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 5.533910] caam 2100000.crypto: Entropy delay = 3200 [ 5.537491] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) [ 5.599758] caam 2100000.crypto: Instantiated RNG4 SH0 [ 5.599844] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 0 [ 5.612872] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 5.620497] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 5.660523] caam 2100000.crypto: Instantiated RNG4 SH1 [ 5.665710] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 5.672332] caam 2100000.crypto: job rings = 2, qi = 0 [ 5.712897] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 5.722293] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 5.742926] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 5.749485] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 5.792975] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 5.812779] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 5.818898] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 5.862903] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 1 [ 5.972257] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 5.982318] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 6.021753] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 6.029818] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 6.038319] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 6.046286] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 6.295532] caam algorithms registered in /proc/crypto [ 6.302074] caam 2100000.crypto: registering rng-caam done Saving random seed: [ 6.358058] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 6.459700] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # [ 6.489590] random: crng init done [ 6.494 360] random: 1 urandom warning(s) missed due to ratelimiting / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-951835/environment . /lava-951835/environment / # /lava-951835/bin/lava-test-runner /lava-951835/0 /lava-951835/bin/lava-test-runner /lava-951835/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-951835/0/tests/0_dmesg + cat uuid + UUID=951835_1.5.2.3.1[ 7.042959] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 7.090320] [ 7.132051] [ 7.173988] + set[ 7.183796] +x / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-951835/environment / # . /lava-951835/environment/lava-951835/bin/lava-test-runner /lava-951835/1 / # /lava-951835/bin/lava-test-runner /lava-951835/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-951835/1/tests/1_bootrr + cat uuid + UUID=951835_1.5.2.3[ 7.672900] .5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-951835/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 2184000.usb /lava-951835/1/../bin/lava-test-case [ 8.747849] /lava-951835/1/../bin/lava-test-case [ 8.789405] /lava-951835/1/../bin/lava-test-case [ 8.815469] + set[ 8.834839] +x / #