Trying 192.168.1.205... Connected to ts5. Escape character is '^]'. ser2net port telnet,2002 device serialdev,/dev/ttyUSB-lf-bbb-02,115200n81,local [] (Debian GNU/Linux) U-Boot SPL 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) Trying to boot from MMC2 U-Boot 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2 0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 172.16.3.187 (96 ms) => setenv serverip 172.16.3.3 setenv serverip 172.16.3.3 => tftp 0x82000000 953046/tftp-deploy-wvf55j01/kernel/zImage tftp 0x82000000 953046/tftp-deploy-wvf55j01/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.187 Filename '953046/tftp-deploy-wvf55j01/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 9.3 MiB 4.3 MiB/s done Bytes transferred = 9699840 (940200 hex) => tftp 0x83000000 953046/tftp-deploy-wvf55j01/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 953046/tftp-deploy-wvf55j01/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.187 Filename '953046/tftp-deploy-wvf55j01/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 15.3 MiB 4 MiB/s done Bytes transferred = 16067072 (f52a00 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 953046/tftp-deploy-wvf55j01/dtb/am335x-boneblack.dtb tftp 0x88000000 953046/tftp-deploy-wvf55j01/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.187 Filename '953046/tftp-deploy-wvf55j01/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 61.4 KiB 3.3 MiB/s done Bytes transferred = 62828 (f56c hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x940200 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2023-06-05 10:31:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 16067008 Bytes = 15.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801256b Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.180-cip34 (KernelCI@build-j1608709-arm-gcc-10-multi-v7-defconfig-hlnkm) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Mon Jun 5 09:45:56 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129540 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 410856K/522240K available (14336K kernel code, 2237K rwdata, 5348K rodata, 2048K init, 426K bss, 45848K reserved, 65536K cma-reserved, 0K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000011] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008336] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.019150] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.033714] Console: colour dummy device 80x30 <3>[ 0.038579] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.045626] This ensures that you still see kernel messages. Please <3>[ 0.052345] update your kernel commandline. <6>[ 0.056949] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.096123] pid_max: default: 32768 minimum: 301 <6>[ 0.101328] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.109119] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.118121] CPU: Testing write buffer coherency: ok <6>[ 0.123514] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.129301] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.135603] Setting up static identity map for 0x80300000 - 0x803000ac <6>[ 0.144997] rcu: Hierarchical SRCU implementation. <6>[ 0.155408] EFI services will not be available. <6>[ 0.160587] smp: Bringing up secondary CPUs ... <6>[ 0.165519] smp: Brought up 1 node, 1 CPU <6>[ 0.169934] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.176645] CPU: All CPU(s) started in SVC mode. <6>[ 0.182260] devtmpfs: initialized <6>[ 0.196331] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.204862] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.215294] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.226433] pinctrl core: initialized pinctrl subsystem <6>[ 0.234859] DMI not present or invalid. <6>[ 0.239906] NET: Registered protocol family 16 <6>[ 0.247201] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.273787] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.282050] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.282254] cpuidle: using governor menu <6>[ 1.339111] No ATAGs? <6>[ 1.341785] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.356850] Serial: AMBA PL011 UART driver <6>[ 1.395800] iommu: Default domain type: Translated <6>[ 1.401656] vgaarb: loaded <5>[ 1.405688] SCSI subsystem initialized <6>[ 1.410787] usbcore: registered new interface driver usbfs <6>[ 1.416742] usbcore: registered new interface driver hub <6>[ 1.422598] usbcore: registered new device driver usb <6>[ 1.430108] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.435491] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.445199] PTP clock support registered <6>[ 1.453386] clocksource: Switched to clocksource dmtimer <6>[ 2.423944] NET: Registered protocol family 2 <6>[ 2.428960] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.437466] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.446399] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.454682] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.462338] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.469267] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.476296] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.483885] NET: Registered protocol family 1 <6>[ 2.489489] RPC: Registered named UNIX socket transport module. <6>[ 2.495928] RPC: Registered udp transport module. <6>[ 2.501033] RPC: Registered tcp transport module. <6>[ 2.506153] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.513052] PCI: CLS 0 bytes, default 64 <6>[ 2.518071] Trying to unpack rootfs image as initramfs... <6>[ 3.582502] Freeing initrd memory: 15692K <6>[ 3.587921] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 3.598295] Initialise system trusted keyrings <6>[ 3.603622] workingset: timestamp_bits=30 max_order=17 bucket_order=0 <6>[ 3.616703] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 3.624024] NFS: Registering the id_resolver key type <5>[ 3.629554] Key type id_resolver registered <5>[ 3.634177] Key type id_legacy registered <6>[ 3.638682] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 3.645894] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 3.653821] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 3.659137] Key type asymmetric registered <5>[ 3.663667] Asymmetric key parser 'x509' registered <6>[ 3.669001] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) <6>[ 3.676900] io scheduler mq-deadline registered <6>[ 3.681825] io scheduler kyber registered <3>[ 3.835371] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.844059] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.963482] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 4.008697] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 4.086764] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.095462] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 4.160613] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.169307] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 4.187826] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 4.196527] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 4.265217] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 4.273727] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 4.316802] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 4.423443] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 4.436022] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 4.445439] printk: console [ttyS0] enabled <6>[ 4.445439] printk: console [ttyS0] enabled <6>[ 4.454498] printk: bootconsole [omap8250] disabled <6>[ 4.454498] printk: bootconsole [omap8250] disabled <6>[ 4.468451] SuperH (H)SCI(F) driver initialized <6>[ 4.475710] msm_serial: driver initialized <6>[ 4.480505] STMicroelectronics ASC driver initialized <6>[ 4.488862] STM32 USART driver initialized <6>[ 4.496379] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 4.518046] random: crng init done <6>[ 4.531298] brd: module loaded <6>[ 4.542297] loop: module loaded <6>[ 4.568469] CAN device driver interface <6>[ 4.574790] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 4.583134] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 4.588457] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 4.594803] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 4.600489] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 4.673419] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 4.709801] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 4.719730] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 4.726434] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 4.732260] cpsw 4a100000.ethernet: Detected MACID = 04:79:b7:e7:06:e0 <6>[ 4.741434] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 4.749367] usbcore: registered new interface driver pegasus <6>[ 4.755407] usbcore: registered new interface driver asix <6>[ 4.761125] usbcore: registered new interface driver ax88179_178a <6>[ 4.767561] usbcore: registered new interface driver cdc_ether <6>[ 4.773762] usbcore: registered new interface driver smsc75xx <6>[ 4.779834] usbcore: registered new interface driver smsc95xx <6>[ 4.785940] usbcore: registered new interface driver net1080 <6>[ 4.791914] usbcore: registered new interface driver cdc_subset <6>[ 4.798171] usbcore: registered new interface driver zaurus <6>[ 4.804112] usbcore: registered new interface driver cdc_ncm <6>[ 4.815996] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 4.822834] ehci-pci: EHCI PCI platform driver <6>[ 4.827672] ehci-platform: EHCI generic platform driver <6>[ 4.833744] ehci-orion: EHCI orion driver <6>[ 4.838422] SPEAr-ehci: EHCI SPEAr driver <6>[ 4.843014] ehci-st: EHCI STMicroelectronics driver <6>[ 4.848552] ehci-exynos: EHCI Exynos driver <6>[ 4.853389] ehci-atmel: EHCI Atmel driver <6>[ 4.857997] tegra-ehci: Tegra EHCI driver <6>[ 4.862632] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 4.869197] ohci-pci: OHCI PCI platform driver <6>[ 4.874028] ohci-platform: OHCI generic platform driver <6>[ 4.880000] SPEAr-ohci: OHCI SPEAr driver <6>[ 4.884674] ohci-st: OHCI STMicroelectronics driver <6>[ 4.890146] ohci-atmel: OHCI Atmel driver <6>[ 4.896570] usbcore: registered new interface driver usb-storage <6>[ 4.914423] i2c /dev entries driver <5>[ 4.948283] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 4.956691] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.963175] sdhci: Copyright(c) Pierre Ossman <6>[ 4.972505] Synopsys Designware Multimedia Card Interface Driver <6>[ 4.982124] sdhci-pltfm: SDHCI platform and OF driver helper <4>[ 4.997490] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 5.032277] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 5.041857] usbcore: registered new interface driver usbhid <6>[ 5.047856] usbhid: USB HID core driver <6>[ 5.061950] NET: Registered protocol family 10 <6>[ 5.068271] Segment Routing with IPv6 <6>[ 5.072305] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 5.079371] NET: Registered protocol family 17 <6>[ 5.084182] can: controller area network core <6>[ 5.088909] NET: Registered protocol family 29 <6>[ 5.093678] can: raw protocol <6>[ 5.096924] can: broadcast manager protocol <6>[ 5.101394] can: netlink gateway - max_hops=1 <5>[ 5.106821] Key type dns_resolver registered <6>[ 5.111519] ThumbEE CPU extension supported. <5>[ 5.116174] Registering SWP/SWPB emulation handler <3>[ 5.121692] omap_voltage_late_init: Voltage driver support not added <6>[ 5.129918] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <5>[ 5.138803] Loading compiled-in X.509 certificates <6>[ 5.160259] OMAP GPIO hardware version 0.1 <4>[ 5.193968] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 5.207202] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 5.222543] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <4>[ 5.228920] at24 0-0050: supply vcc not found, using dummy regulator <6>[ 5.236308] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 5.244297] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <4>[ 5.254262] at24 2-0054: supply vcc not found, using dummy regulator <6>[ 5.264022] mmc1: new high speed MMC card at address 0001 <6>[ 5.270584] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 5.275837] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB <6>[ 5.282365] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB <6>[ 5.288996] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (235:0) <6>[ 5.298509] mmcblk1: p1 <4>[ 5.302649] at24 2-0055: supply vcc not found, using dummy regulator <4>[ 5.337640] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 5.377192] at24 2-0057: supply vcc not found, using dummy regulator <6>[ 5.416223] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 5.440110] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 5.449304] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 5.454433] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 5.517488] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 5.559569] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 5.645253] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 8.834269] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 8.843531] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 8.873532] Sending DHCP requests ., OK <6>[ 9.037634] IP-Config: Got DHCP answer from 172.16.3.3, my address is 172.16.3.187 <6>[ 9.045628] IP-Config: Complete: <6>[ 9.049170] device=eth0, hwaddr=04:79:b7:e7:06:e0, ipaddr=172.16.3.187, mask=255.255.255.0, gw=172.16.3.3 <6>[ 9.059559] host=172.16.3.187, domain=denx.de, nis-domain=(none) <6>[ 9.066364] bootserver=172.16.3.33, rootserver=172.16.3.33, rootpath= <6>[ 9.066383] nameserver0=172.16.3.3 <6>[ 9.077770] ntpserver0=172.16.3.3 <6>[ 9.095457] Freeing unused kernel memory: 2048K <6>[ 9.104384] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 9.303741] udevd[97]: starting version 3.2.9 <27>[ 9.319930] udevd[97]: specified user 'tss' unknown <27>[ 9.325701] udevd[97]: specified group 'tss' unknown <30>[ 9.345359] udevd[98]: starting eudev-3.2.9 <4>[ 11.020004] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 11.029111] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <4>[ 11.254754] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 11.263843] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 11.422121] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 11.427939] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 11.644596] hub 1-0:1.0: USB hub found <6>[ 11.683491] hub 1-0:1.0: 1 port detected done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-953046/environment . /lava-953046/environment / # /lava-953046/bin/lava-test-runner /lava-953046/0 /lava-953046/bin/lava-test-runner /lava-953046/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-953046/0/tests/0_dmesg + cat uuid + UUID=953046_1.5.2.4.1 + <8>[ 16.537762] set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 16.594768] <8>[ 16.646636] <8>[ 16.698286] + set +x <8>[ 16.709119] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-953046/environment / # . /lava-953046/environment/lava-953046/bin/lava-test-runner /lava-953046/1 / # /lava-953046/bin/lava-test-runner /lava-953046/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-953046/1/tests/1_bootrr + cat uuid + UUID=953046_1.5.2.4.5 + <8>[ 17.238346] set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-953046/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto sound /lava-953046/1/../bin/lava-test-case <8>[ 18.331186] /lava-953046/1/../bin/lava-test-case <8>[ 18.379949] /lava-953046/1/../bin/lava-test-case <8>[ 18.409705] /lava-953046/1/../bin/lava-test-case <8>[ 18.464422] /lava-953046/1/../bin/lava-test-case <8>[ 18.510340] /lava-953046/1/../bin/lava-test-case <8>[ 18.547281] /lava-953046/1/../bin/lava-test-case <8>[ 18.593150] /lava-953046/1/../bin/lava-test-case <8>[ 18.638440] /lava-953046/1/../bin/lava-test-case <8>[ 18.675264] /lava-953046/1/../bin/lava-test-case <8>[ 18.720293] /lava-953046/1/../bin/lava-test-case <8>[ 19.793901] /lava-953046/1/../bin/lava-test-case <8>[ 20.853650] /lava-953046/1/../bin/lava-test-case <8>[ 20.889825] /lava-953046/1/../bin/lava-test-case <8>[ 20.926042] /lava-953046/1/../bin/lava-test-case <8>[ 20.962460] /lava-953046/1/../bin/lava-test-case <8>[ 21.007828] /lava-953046/1/../bin/lava-test-case <8>[ 21.045559] /lava-953046/1/../bin/lava-test-case <8>[ 21.091636] /lava-953046/1/../bin/lava-test-case <8>[ 21.136597] /lava-953046/1/../bin/lava-test-case <8>[ 21.173122] /lava-953046/1/../bin/lava-test-case <8>[ 21.219660] /lava-953046/1/../bin/lava-test-case <8>[ 21.265292] /lava-953046/1/../bin/lava-test-case <8>[ 21.302443] /lava-953046/1/../bin/lava-test-case <8>[ 21.349373] /lava-953046/1/../bin/lava-test-case <8>[ 21.386857] /lava-953046/1/../bin/lava-test-case <8>[ 21.432340] /lava-953046/1/../bin/lava-test-case <8>[ 22.492599] /lava-953046/1/../bin/lava-test-case <8>[ 23.553930] /lava-953046/1/../bin/lava-test-case <8>[ 23.591308] /lava-953046/1/../bin/lava-test-case <8>[ 23.637914] /lava-953046/1/../bin/lava-test-case <8>[ 23.675450] /lava-953046/1/../bin/lava-test-case <8>[ 23.720900] /lava-953046/1/../bin/lava-test-case <8>[ 24.782291] /lava-953046/1/../bin/lava-test-case <8>[ 25.843259] /lava-953046/1/../bin/lava-test-case <8>[ 25.880437] /lava-953046/1/../bin/lava-test-case <8>[ 25.926762] /lava-953046/1/../bin/lava-test-case <8>[ 26.981730] /lava-953046/1/../bin/lava-test-case <8>[ 28.049722] /lava-953046/1/../bin/lava-test-case <8>[ 29.111482] /lava-953046/1/../bin/lava-test-case <8>[ 30.172772] /lava-953046/1/../bin/lava-test-case <8>[ 31.233053] /lava-953046/1/../bin/lava-test-case <8>[ 32.293956] /lava-953046/1/../bin/lava-test-case <8>[ 33.359258] /lava-953046/1/../bin/lava-test-case <8>[ 34.421484] /lava-953046/1/../bin/lava-test-case <8>[ 35.482401] /lava-953046/1/../bin/lava-test-case <8>[ 36.543854] /lava-953046/1/../bin/lava-test-case <8>[ 37.603771] /lava-953046/1/../bin/lava-test-case <8>[ 38.663935] /lava-953046/1/../bin/lava-test-case <8>[ 39.723318] /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: line 84: assert_device-present: not found /lava-953046/1/../bin/lava-test-case <8>[ 39.761955] /lava-953046/1/../bin/lava-test-case <8>[ 40.831751] /lava-953046/1/../bin/lava-test-case <8>[ 41.891667] + set +x <8>[ 41.907220] / #