[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.14 (259 ms) U-Boot> setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 U-Boot> tftp 0x01000000 11139022/tftp-deploy-09ah42cy/kernel/zImage tftp 0x01000000 11139022/tftp-deploy-09ah42cy/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11139022/tftp-deploy-09ah42cy/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###### 542 KiB/s done Bytes transferred = 5811416 (58acd8 hex) U-Boot> tftp 0x02200000 11139022/tftp-deploy-09ah42cy/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 11139022/tftp-deploy-09ah42cy/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11139022/tftp-deploy-09ah42cy/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 1 MiB/s done Bytes transferred = 9261073 (8d5011 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 11139022/tftp-deploy-09ah42cy/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 11139022/tftp-deploy-09ah42cy/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11139022/tftp-deploy-09ah42cy/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 1.1 MiB/s done Bytes transferred = 13687 (3577 hex) U-Boot> setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x58acd8 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9261009 Bytes = 8.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006676 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.186-cip37 (KernelCI@build-j12965-arm-gcc-10-bcm2835-defconfig-59s6f) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Tue Jul 25 19:32:29 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:148 arm_dt_init_cpu_maps+0x1b8/0x200 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.186-cip37 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] Backtrace: [ 0.000000] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 0.000000] r7:c0e01edc r6:00000000 r5:00000009 r4:c0bbe17e [ 0.000000] [] (show_stack) from [] (dump_stack+0x28/0x30) [ 0.000000] [] (dump_stack) from [] (__warn+0x9c/0xdc) [ 0.000000] r5:00000009 r4:c0b34c70 [ 0.000000] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) [ 0.000000] r9:c0f75988 r8:c0b34ce9 r7:00000009 r6:c0d04d08 r5:00000094 r4:c0b34c70 [ 0.000000] [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x1b8/0x200) [ 0.000000] r8:c0b34c1d r7:00000000 r6:ff000000 r5:00000000 r4:eb9d96c4 [ 0.000000] [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x26c/0x644) [ 0.000000] r10:c0e01f70 r9:c0e01f68 r8:ebffff00 r7:c0bcc0c8 r6:2fffffff r5:c0e08738 [ 0.000000] r4:c0d340ec [ 0.000000] [] (setup_arch) from [] (start_kernel+0x64/0x520) [ 0.000000] r10:10c53c7d r9:410fc075 r8:00000100 r7:c0f8f03c r6:c0e04240 r5:00000051 [ 0.000000] r4:c0d004b0 [ 0.000000] [] (start_kernel) from [<00000000>] (0x0) [ 0.000000] r9:410fc075 r8:00000100 r7:00000000 r6:10c03c7d r5:00000051 r4:c0d004b0 [ 0.000000] ---[ end trace 58996bc4bee07162 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689060K/786432K available (8192K kernel code, 1595K rwdata, 3252K rodata, 1024K init, 710K bss, 31836K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 32719 entries in 96 pages <6>[ 0.000000] ftrace: allocated 96 pages with 2 groups <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000018] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008816] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018643] bcm2835: system timer (irq = 27) <6>[ 0.023747] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030239] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041508] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049938] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056726] Console: colour dummy device 80x30 <6>[ 0.061589] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072437] pid_max: default: 32768 minimum: 301 <6>[ 0.077784] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.085534] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.094723] CPU: Testing write buffer coherency: ok <6>[ 0.101118] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.109308] devtmpfs: initialized <6>[ 0.118957] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.127371] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.137695] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.148149] pinctrl core: initialized pinctrl subsystem <6>[ 0.155769] NET: Registered protocol family 16 <6>[ 0.162736] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.173404] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.173914] No ATAGs? <6>[ 0.182948] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.191372] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.197904] Serial: AMBA PL011 UART driver <6>[ 0.223227] Kprobes globally optimized <5>[ 0.232655] SCSI subsystem initialized <6>[ 0.237079] usbcore: registered new interface driver usbfs <6>[ 0.243076] usbcore: registered new interface driver hub <6>[ 0.248816] usbcore: registered new device driver usb <4>[ 0.254491] usb_phy_generic phy: supply vcc not found, using dummy regulator <4>[ 0.262142] usb_phy_generic phy: dummy supplies not allowed for exclusive requests <6>[ 0.270403] mc: Linux media interface: v0.10 <6>[ 0.275067] videodev: Linux video capture interface: v2.00 <6>[ 0.281210] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.288421] Bluetooth: Core ver 2.22 <6>[ 0.292443] NET: Registered protocol family 31 <6>[ 0.297239] Bluetooth: HCI device and connection manager initialized <6>[ 0.304008] Bluetooth: HCI socket layer initialized <6>[ 0.309246] Bluetooth: L2CAP socket layer initialized <6>[ 0.314690] Bluetooth: SCO socket layer initialized <6>[ 0.320519] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.571488] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes, mapped to 0x(ptrval) <6>[ 0.582476] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 0.595856] Console: switching to colour frame buffer device 82x26 <6>[ 0.605456] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 0.623156] NET: Registered protocol family 2 <6>[ 0.628363] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.637778] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.646666] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.654919] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.662558] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.669521] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.676482] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.684065] NET: Registered protocol family 1 <6>[ 0.689555] RPC: Registered named UNIX socket transport module. <6>[ 0.695898] RPC: Registered udp transport module. <6>[ 0.700969] RPC: Registered tcp transport module. <6>[ 0.706027] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.714807] Unpacking initramfs... <6>[ 1.509931] Freeing initrd memory: 9048K <6>[ 1.515485] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 1.525629] Initialise system trusted keyrings <6>[ 1.530844] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.548228] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <5>[ 1.674882] Key type asymmetric registered <5>[ 1.679329] Asymmetric key parser 'x509' registered <6>[ 1.684807] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) <6>[ 1.692633] io scheduler mq-deadline registered <6>[ 1.697516] io scheduler kyber registered <6>[ 1.710297] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.722589] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.733948] usbcore: registered new interface driver zd1211rw <6>[ 1.740155] usbcore: registered new interface driver lan78xx <6>[ 1.746325] usbcore: registered new interface driver asix <6>[ 1.752178] usbcore: registered new interface driver ax88179_178a <6>[ 1.758701] usbcore: registered new interface driver cdc_ether <6>[ 1.765002] usbcore: registered new interface driver smsc95xx <6>[ 1.771188] usbcore: registered new interface driver net1080 <6>[ 1.777268] usbcore: registered new interface driver cdc_subset <6>[ 1.783684] usbcore: registered new interface driver zaurus <6>[ 1.789719] usbcore: registered new interface driver cdc_ncm <6>[ 1.796409] usbcore: registered new interface driver usb-storage <6>[ 1.803024] i2c /dev entries driver <4>[ 1.809330] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.819013] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.826211] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.832802] sdhci: Copyright(c) Pierre Ossman <6>[ 1.837790] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.845242] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.852221] usbcore: registered new interface driver usbhid <6>[ 1.858168] usbhid: USB HID core driver <6>[ 1.862546] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.870574] NET: Registered protocol family 10 <6>[ 1.876749] Segment Routing with IPv6 <6>[ 1.880966] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.888129] NET: Registered protocol family 17 <6>[ 1.893530] oprofile: using timer interrupt. <5>[ 1.898631] Loading compiled-in X.509 certificates <6>[ 1.910275] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.919792] printk: console [ttyAMA0] enabled <6>[ 1.919792] printk: console [ttyAMA0] enabled <6>[ 1.929161] printk: bootconsole [pl11] disabled <6>[ 1.929161] printk: bootconsole [pl11] disabled <6>[ 1.942887] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <4>[ 1.954359] ------------[ cut here ]------------ <4>[ 1.959267] WARNING: CPU: 0 PID: 46 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xf8/0x2f0 <4>[ 1.968513] Modules linked in: <4>[ 1.971856] CPU: 0 PID: 46 Comm: kworker/0:3 Tainted: G W 5.10.186-cip37 #1 <4>[ 1.980364] Hardware name: BCM2835 <4>[ 1.984054] Workqueue: events deferred_probe_work_func <4>[ 1.989446] Backtrace: <4>[ 1.992181] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 2.000005] r7:00000000 r6:00000000 r5:00000009 r4:c0bbe17e <4>[ 2.005937] [] (show_stack) from [] (dump_stack+0x28/0x30) <4>[ 2.013436] [] (dump_stack) from [] (__warn+0x9c/0xdc) <4>[ 2.020572] r5:00000009 r4:c0ba6d0e <4>[ 2.024412] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) <4>[ 2.032159] r9:c470cbc8 r8:00000000 r7:00000009 r6:c062f5b4 r5:0000004f r4:c0ba6d0e <4>[ 2.040160] [] (warn_slowpath_fmt) from [] (dt_cpufreq_probe+0xf8/0x2f0) <4>[ 2.048860] r8:00000000 r7:c470da10 r6:c470cbc0 r5:c0e08868 r4:00000000 <4>[ 2.055834] [] (dt_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.064559] r10:00000003 r9:c103178c r8:00000000 r7:c1031784 r6:c0f35e2c r5:c470da10 <4>[ 2.072648] r4:00000000 <4>[ 2.075449] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.083976] r7:c1031784 r6:c0f35e2c r5:00000000 r4:c470da10 <4>[ 2.089898] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.098513] r10:00000003 r9:00000000 r8:c0f25548 r7:c470da10 r6:c46f17fc r5:c0f35e2c <4>[ 2.106600] r4:c470da10 <4>[ 2.109401] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.118712] r8:c0f25548 r7:c470da10 r6:c46f17fc r5:c0f35e2c r4:00000001 <4>[ 2.125685] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.134731] r7:c470da54 r6:c051e3e4 r5:c46f17fc r4:00000000 <4>[ 2.140662] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.149175] r6:c470da10 r5:00000001 r4:c470da10 <4>[ 2.154068] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.162854] r7:00000000 r6:c470da10 r5:c0f254f0 r4:c470da10 <4>[ 2.168774] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.177670] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.185852] r7:00000000 r6:c0f251e8 r5:00000000 r4:c470da10 <4>[ 2.191783] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.200214] r9:c0e0b420 r8:c0e0b400 r7:05f5e100 r6:00000000 r5:00000000 r4:c470da00 <4>[ 2.208225] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.218228] r9:05f5e0ff r8:2faf0800 r7:05f5e100 r6:c46f18e0 r5:00000000 r4:c470da00 <4>[ 2.226241] [] (platform_device_register_full) from [] (raspberrypi_cpufreq_probe+0x10c/0x198) <4>[ 2.236846] r7:05f5e100 r6:c0e08868 r5:00000000 r4:00000000 <4>[ 2.242778] [] (raspberrypi_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.252266] r9:c103178c r8:00000000 r7:c1031784 r6:c0f35f24 r5:c470d610 r4:00000000 <4>[ 2.260267] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.268794] r7:c1031784 r6:c0f35f24 r5:00000000 r4:c470d610 <4>[ 2.274729] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.283350] r10:c470c340 r9:00000000 r8:c470d410 r7:c470d610 r6:c46f1a2c r5:c0f35f24 <4>[ 2.291446] r4:c470d610 <4>[ 2.294248] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.303556] r8:c470d410 r7:c470d610 r6:c46f1a2c r5:c0f35f24 r4:00000001 <4>[ 2.310529] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.319563] r7:c470d654 r6:c051e3e4 r5:c46f1a2c r4:00000000 <4>[ 2.325495] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.334019] r6:c470d610 r5:00000001 r4:c470d610 <4>[ 2.338900] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.347686] r7:00000000 r6:c470d610 r5:c0f254f0 r4:c470d610 <4>[ 2.353618] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.362496] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.370674] r7:00000000 r6:c0f251e8 r5:00000000 r4:c470d610 <4>[ 2.376594] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.385036] r9:c0e0b420 r8:c0e0b400 r7:00000000 r6:00000000 r5:00000000 r4:c470d600 <4>[ 2.393051] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.403055] r9:c470d410 r8:c4707150 r7:00000000 r6:c46f1b18 r5:00000000 r4:c470d600 <4>[ 2.411072] [] (platform_device_register_full) from [] (raspberrypi_clk_probe+0x160/0x31c) <4>[ 2.421331] r7:00000000 r6:00000000 r5:c470c2c0 r4:00000000 <4>[ 2.427252] [] (raspberrypi_clk_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.436388] r10:00000003 r9:c103178c r8:00000000 r7:c1031784 r6:c0f1f68c r5:c470d410 <4>[ 2.444474] r4:00000000 <4>[ 2.447274] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.455799] r7:c1031784 r6:c0f1f68c r5:00000000 r4:c470d410 <4>[ 2.461731] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.470336] r10:00000003 r9:00000000 r8:c1594c10 r7:c470d410 r6:c46f1c6c r5:c0f1f68c <4>[ 2.478423] r4:c470d410 <4>[ 2.481239] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.490547] r8:c1594c10 r7:c470d410 r6:c46f1c6c r5:c0f1f68c r4:00000001 <4>[ 2.497507] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.506558] r7:c470d454 r6:c051e3e4 r5:c46f1c6c r4:00000000 <4>[ 2.512491] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.521015] r6:c470d410 r5:00000001 r4:c470d410 <4>[ 2.525896] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.534681] r7:00000000 r6:c470d410 r5:c0f254f0 r4:c470d410 <4>[ 2.540613] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.549480] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.557658] r7:00000000 r6:c0f251e8 r5:00000000 r4:c470d410 <4>[ 2.563588] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.572030] r9:c0e0b420 r8:c0e0b400 r7:c1594c00 r6:00000000 r5:00000000 r4:c470d400 <4>[ 2.580030] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.590033] r9:c103178c r8:00000001 r7:c1594c00 r6:c46f1d58 r5:00000000 r4:c470d400 <4>[ 2.598049] [] (platform_device_register_full) from [] (rpi_firmware_probe+0x1a4/0x1ec) <4>[ 2.608048] r7:c1594c00 r6:c1594c10 r5:c470b5c0 r4:00000000 <4>[ 2.613984] [] (rpi_firmware_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.622859] r8:00000000 r7:c1031784 r6:c0f37844 r5:c1594c10 r4:00000000 <4>[ 2.629820] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.638346] r7:c1031784 r6:c0f37844 r5:00000000 r4:c1594c10 <4>[ 2.644278] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.652894] r10:c0f25444 r9:00000000 r8:00000000 r7:c1594c10 r6:c46f1ea4 r5:c0f37844 <4>[ 2.660981] r4:c1594c10 <4>[ 2.663783] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.673091] r8:00000000 r7:c1594c10 r6:c46f1ea4 r5:c0f37844 r4:00000001 <4>[ 2.680051] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.689097] r7:c1594c54 r6:c051e3e4 r5:c46f1ea4 r4:00000000 <4>[ 2.695032] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.703557] r6:c1594c10 r5:00000001 r4:c1594c10 <4>[ 2.708439] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.717225] r7:eb9c7300 r6:c1594c10 r5:c0f254f0 r4:c1594c10 <4>[ 2.723161] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.732041] [] (bus_probe_device) from [] (deferred_probe_work_func+0xa8/0xcc) <4>[ 2.741261] r7:eb9c7300 r6:c0f25468 r5:c0f2542c r4:c1594c10 <4>[ 2.747185] [] (deferred_probe_work_func) from [] (process_one_work+0x194/0x274) <4>[ 2.756578] r7:eb9c7300 r6:c0e0d160 r5:c0f25440 r4:c46d6c80 <4>[ 2.762507] [] (process_one_work) from [] (worker_thread+0x220/0x2e4) <4>[ 2.770950] r10:c159f720 r9:c0f8fabc r8:c0e0d174 r7:c0edcaa0 r6:c0e0d160 r5:c46d6c94 <4>[ 2.779025] r4:c46d6c80 <4>[ 2.781837] [] (worker_thread) from [] (kthread+0x11c/0x128) <4>[ 2.789489] r9:c1531e98 r8:c46d6c80 r7:c0134f3c r6:c46f0000 r5:c159f200 r4:c159f700 <4>[ 2.797501] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 2.804985] Exception stack(0xc46f1fb0 to 0xc46f1ff8) <4>[ 2.810292] 1fa0: 00000000 00000000 00000000 00000000 <4>[ 2.818732] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.827175] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.834062] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0139a40 <4>[ 2.842151] r4:c159f200 r3:00000001 <4>[ 2.845981] ---[ end trace 58996bc4bee07164 ]--- <6>[ 2.850905] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <4>[ 2.859941] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.867588] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator <6>[ 2.927260] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.932443] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.939914] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.946650] hub 1-0:1.0: USB hub found <6>[ 2.950844] hub 1-0:1.0: 1 port detected <4>[ 2.958155] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <4>[ 2.994100] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 3.004694] mmc0: new high speed SDHC card at address 0002 <6>[ 3.011520] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 3.018995] mmcblk0: p1 <6>[ 3.300550] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.551620] hub 1-1:1.0: USB hub found <6>[ 3.555740] hub 1-1:1.0: 5 ports detected <6>[ 3.880547] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 4.013841] smsc95xx v2.0.0 <6>[ 4.174147] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) <6>[ 4.186658] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 4.254818] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 4.272121] smsc95xx 1-1.1:1.0 eth0: Link is Down <6>[ 4.300547] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.436995] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.444713] scsi host0: usb-storage 1-1.3:1.0 <5>[ 5.540224] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <5>[ 5.850568] random: crng init done <6>[ 6.343576] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 6.360590] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 6.390724] Sending DHCP requests ., OK <6>[ 6.434670] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.14 <6>[ 6.443012] IP-Config: Complete: <6>[ 6.446540] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.201.14, mask=255.255.255.0, gw=192.168.201.1 <6>[ 6.457295] host=bcm2836-rpi-2-b-cbg-0, domain=lava-rack, nis-domain=(none) <6>[ 6.464981] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 6.464987] nameserver0=192.168.201.1 <5>[ 6.477245] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 6.487018] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 6.501334] sd 0:0:0:0: [sda] Write Protect is off <3>[ 6.509921] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 6.515591] sd 0:0:0:0: [sda] Assuming drive cache: write through <5>[ 6.534773] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 6.542361] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 6.552012] ALSA device list: <6>[ 6.555331] No soundcards found. <6>[ 6.559107] cfg80211: failed to load regulatory.db <6>[ 6.564929] uart-pl011 3f201000.serial: no DMA platform data <6>[ 6.601567] sda: sda1 sda2 <5>[ 6.608771] sd 0:0:0:0: [sda] Attached SCSI removable disk <6>[ 6.622457] Freeing unused kernel memory: 1024K <6>[ 6.627625] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 6.857667] udevd[93]: starting version 3.2.9 <27>[ 6.876723] udevd[93]: specified user 'tss' unknown <27>[ 6.882459] udevd[93]: specified group 'tss' unknown <30>[ 6.893938] udevd[94]: starting eudev-3.2.9 <4>[ 7.248358] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 7.303860] bcm2835-rng 3f104000.rng: hwrng registered <3>[ 7.384703] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 7.391497] vchiq: could not load vchiq done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-11139022/environment . /lava-11139022/environment / # /lava-11139022/bin/lava-test-runner /lava-11139022/0 /lava-11139022/bin/lava-test-runner /lava-11139022/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-11139022/0/tests/0_dmesg + cat uuid + UUID=11139022_1.5.<8>[ 8.668640] 2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 8.733486] <8>[ 8.793098] <8>[ 8.852739] + set +x <8>[ 8.863774] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-11139022/environment / # . /lava-11139022/environment/lava-11139022/bin/lava-test-runner /lava-11139022/1 / # /lava-11139022/bin/lava-test-runner /lava-11139022/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-11139022/1/tests/1_bootrr + cat uuid + UUID=11139022_1.5.<8>[ 9.380187] 2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-11139022/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 3f902000.hdmi 3f806000.vec 3fc00000.v3d /lava-11139022/1/../bin/lava-test-case <8>[ 10.461838] /lava-11139022/1/../bin/lava-test-case <8>[ 10.516952] /lava-11139022/1/../bin/lava-test-case <8>[ 10.549856] + set +x <8>[ 10.575337] / #