[Enter `^Ec?' for help] U-Boot 2016.03-rc1-00131-g39af3d8-dirty (Feb 09 2016 - 16:39:49 +0000) DRAM: 944 MiB WARNING: Caches not enabled RPI Model B+ (0x10) MMC: bcm2835_sdhci: 0 reading uboot.env In: serial Out: lcd Err: lcd Net: Net Initialization Skipped No ethernet found. starting USB... USB0: Core Release: 2.80a scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 2  0 U-Boot> usb start usb start U-Boot> setenv autoload no setenv autoload no U-Boot> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff U-Boot> setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff U-Boot> dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.201.14 (259 ms) U-Boot> setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 U-Boot> tftp 0x01000000 11330271/tftp-deploy-vd4bdh8v/kernel/zImage tftp 0x01000000 11330271/tftp-deploy-vd4bdh8v/kernel/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11330271/tftp-deploy-vd4bdh8v/kernel/zImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###### 520.5 KiB/s done Bytes transferred = 5811416 (58acd8 hex) U-Boot> tftp 0x02200000 11330271/tftp-deploy-vd4bdh8v/ramdisk/ramdisk.cpio.gz.uboot tftp 0x02200000 11330271/tftp-deploy-vd4bdh8v/ramdisk/ramdisk.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11330271/tftp-deploy-vd4bdh8v/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x2200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 961.9 KiB/s done Bytes transferred = 9262181 (8d5465 hex) U-Boot> setenv initrd_size ${filesize} setenv initrd_size ${filesize} U-Boot> tftp 0x00000100 11330271/tftp-deploy-vd4bdh8v/dtb/bcm2836-rpi-2-b.dtb tftp 0x00000100 11330271/tftp-deploy-vd4bdh8v/dtb/bcm2836-rpi-2-b.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.201.1; our IP address is 192.168.201.14 Filename '11330271/tftp-deploy-vd4bdh8v/dtb/bcm2836-rpi-2-b.dtb'. Load address: 0x100 Loading: *# 786.1 KiB/s done Bytes transferred = 13687 (3577 hex) U-Boot> setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' U-Boot> bootz 0x01000000 0x02200000 0x00000100 bootz 0x01000000 0x02200000 0x00000100 Kernel image @ 0x1000000 [ 0x000000 - 0x58acd8 ] ## Loading init Ramdisk from Legacy Image at 02200000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 9262117 Bytes = 8.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00000100 Booting using the fdt blob at 0x000100 reserving fdt memory region: addr=0 size=1000 Using Device Tree in place at 00000100, end 00006676 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.186-cip37 (KernelCI@build-j17276-arm-gcc-10-bcm2835-defconfig-hzlpm) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 Tue Aug 22 11:39:32 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '115200n8') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Ignoring RAM at 0x30000000-0x3b000000 [ 0.000000] Consider using a HIGHMEM enabled kernel. [ 0.000000] Reserved memory: created CMA memory pool at 0x2c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:148 arm_dt_init_cpu_maps+0x1b8/0x200 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.186-cip37 #1 [ 0.000000] Hardware name: BCM2835 [ 0.000000] Backtrace: [ 0.000000] [] (dump_backtrace) from [] (show_stack+0x20/0x24) [ 0.000000] r7:c0e01edc r6:00000000 r5:00000009 r4:c0bbe17e [ 0.000000] [] (show_stack) from [] (dump_stack+0x28/0x30) [ 0.000000] [] (dump_stack) from [] (__warn+0x9c/0xdc) [ 0.000000] r5:00000009 r4:c0b34c70 [ 0.000000] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) [ 0.000000] r9:c0f75988 r8:c0b34ce9 r7:00000009 r6:c0d04d08 r5:00000094 r4:c0b34c70 [ 0.000000] [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x1b8/0x200) [ 0.000000] r8:c0b34c1d r7:00000000 r6:ff000000 r5:00000000 r4:eb9d96c4 [ 0.000000] [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x26c/0x644) [ 0.000000] r10:c0e01f70 r9:c0e01f68 r8:ebffff00 r7:c0bcc0c8 r6:2fffffff r5:c0e08738 [ 0.000000] r4:c0d340ec [ 0.000000] [] (setup_arch) from [] (start_kernel+0x64/0x520) [ 0.000000] r10:10c53c7d r9:410fc075 r8:00000100 r7:c0f8f03c r6:c0e04240 r5:00000051 [ 0.000000] r4:c0d004b0 [ 0.000000] [] (start_kernel) from [<00000000>] (0x0) [ 0.000000] r9:410fc075 r8:00000100 r7:00000000 r6:10c03c7d r5:00000051 r4:c0d004b0 [ 0.000000] ---[ end trace 58996bc4bee07162 ]--- [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 195072 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 689060K/786432K available (8192K kernel code, 1595K rwdata, 3252K rodata, 1024K init, 710K bss, 31836K reserved, 65536K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] ftrace: allocating 32719 entries in 96 pages <6>[ 0.000000] ftrace: allocated 96 pages with 2 groups <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <3>[ 0.000000] [Firmware Bug]: Bootloader left irq enabled: bank 1 irq 9 <6>[ 0.000020] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns <6>[ 0.008820] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns <6>[ 0.018646] bcm2835: system timer (irq = 27) <6>[ 0.023761] arch_timer: cp15 timer(s) running at 19.20MHz (virt). <6>[ 0.030256] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns <6>[ 0.041526] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns <6>[ 0.049959] Switching to timer-based delay loop, resolution 52ns <6>[ 0.056751] Console: colour dummy device 80x30 <6>[ 0.061614] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) <6>[ 0.072461] pid_max: default: 32768 minimum: 301 <6>[ 0.077805] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.085555] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.094736] CPU: Testing write buffer coherency: ok <6>[ 0.101108] Setting up static identity map for 0x100000 - 0x100054 <6>[ 0.109294] devtmpfs: initialized <6>[ 0.118936] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 <6>[ 0.127345] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.137672] futex hash table entries: 256 (order: -1, 3072 bytes, linear) <6>[ 0.148130] pinctrl core: initialized pinctrl subsystem <6>[ 0.155760] NET: Registered protocol family 16 <6>[ 0.162709] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.173377] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.173878] No ATAGs? <6>[ 0.182911] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.191336] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.197875] Serial: AMBA PL011 UART driver <6>[ 0.223138] Kprobes globally optimized <5>[ 0.232565] SCSI subsystem initialized <6>[ 0.236978] usbcore: registered new interface driver usbfs <6>[ 0.242973] usbcore: registered new interface driver hub <6>[ 0.248707] usbcore: registered new device driver usb <4>[ 0.254379] usb_phy_generic phy: supply vcc not found, using dummy regulator <4>[ 0.262024] usb_phy_generic phy: dummy supplies not allowed for exclusive requests <6>[ 0.270288] mc: Linux media interface: v0.10 <6>[ 0.274951] videodev: Linux video capture interface: v2.00 <6>[ 0.281096] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.288319] Bluetooth: Core ver 2.22 <6>[ 0.292335] NET: Registered protocol family 31 <6>[ 0.297130] Bluetooth: HCI device and connection manager initialized <6>[ 0.303894] Bluetooth: HCI socket layer initialized <6>[ 0.309132] Bluetooth: L2CAP socket layer initialized <6>[ 0.314573] Bluetooth: SCO socket layer initialized <6>[ 0.320402] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.571491] simple-framebuffer 3b006000.framebuffer: framebuffer at 0x3b006000, 0x85400 bytes, mapped to 0x(ptrval) <6>[ 0.582499] simple-framebuffer 3b006000.framebuffer: format=r5g6b5, mode=656x416x16, linelength=1312 <6>[ 0.595918] Console: switching to colour frame buffer device 82x26 <6>[ 0.605522] simple-framebuffer 3b006000.framebuffer: fb0: simplefb registered! <6>[ 0.623221] NET: Registered protocol family 2 <6>[ 0.628427] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.637861] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.646744] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.654997] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.662635] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.669610] UDP hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.676576] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear) <6>[ 0.684158] NET: Registered protocol family 1 <6>[ 0.689651] RPC: Registered named UNIX socket transport module. <6>[ 0.695990] RPC: Registered udp transport module. <6>[ 0.701058] RPC: Registered tcp transport module. <6>[ 0.706117] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.714898] Unpacking initramfs... <6>[ 1.511104] Freeing initrd memory: 9048K <6>[ 1.516565] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available <5>[ 1.526733] Initialise system trusted keyrings <6>[ 1.531925] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 1.549316] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <5>[ 1.677413] Key type asymmetric registered <5>[ 1.682022] Asymmetric key parser 'x509' registered <6>[ 1.687341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) <6>[ 1.695174] io scheduler mq-deadline registered <6>[ 1.700060] io scheduler kyber registered <6>[ 1.712862] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.725068] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver <6>[ 1.736371] usbcore: registered new interface driver zd1211rw <6>[ 1.742641] usbcore: registered new interface driver lan78xx <6>[ 1.748740] usbcore: registered new interface driver asix <6>[ 1.754587] usbcore: registered new interface driver ax88179_178a <6>[ 1.761129] usbcore: registered new interface driver cdc_ether <6>[ 1.767424] usbcore: registered new interface driver smsc95xx <6>[ 1.773610] usbcore: registered new interface driver net1080 <6>[ 1.779691] usbcore: registered new interface driver cdc_subset <6>[ 1.786099] usbcore: registered new interface driver zaurus <6>[ 1.792150] usbcore: registered new interface driver cdc_ncm <6>[ 1.798824] usbcore: registered new interface driver usb-storage <6>[ 1.805439] i2c /dev entries driver <4>[ 1.811778] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property <6>[ 1.821426] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer <6>[ 1.828590] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.835182] sdhci: Copyright(c) Pierre Ossman <6>[ 1.840175] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.847615] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.854612] usbcore: registered new interface driver usbhid <6>[ 1.860587] usbhid: USB HID core driver <6>[ 1.864934] bcm2835-mbox 3f00b880.mailbox: mailbox enabled <6>[ 1.872959] NET: Registered protocol family 10 <6>[ 1.879118] Segment Routing with IPv6 <6>[ 1.883343] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.890533] NET: Registered protocol family 17 <6>[ 1.895906] oprofile: using timer interrupt. <5>[ 1.901039] Loading compiled-in X.509 certificates <6>[ 1.912751] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 <6>[ 1.922905] printk: console [ttyAMA0] enabled <6>[ 1.922905] printk: console [ttyAMA0] enabled <6>[ 1.932249] printk: bootconsole [pl11] disabled <6>[ 1.932249] printk: bootconsole [pl11] disabled <6>[ 1.945367] raspberrypi-firmware soc:firmware: Attached to firmware from 2014-12-19T18:44:06 <6>[ 1.954153] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1) <4>[ 1.963580] ------------[ cut here ]------------ <4>[ 1.968496] WARNING: CPU: 0 PID: 46 at drivers/cpufreq/cpufreq-dt.c:79 dt_cpufreq_probe+0xf8/0x2f0 <4>[ 1.977741] Modules linked in: <4>[ 1.981081] CPU: 0 PID: 46 Comm: kworker/0:3 Tainted: G W 5.10.186-cip37 #1 <4>[ 1.989590] Hardware name: BCM2835 <4>[ 1.993282] Workqueue: events deferred_probe_work_func <4>[ 1.998674] Backtrace: <4>[ 2.001420] [] (dump_backtrace) from [] (show_stack+0x20/0x24) <4>[ 2.009243] r7:00000000 r6:00000000 r5:00000009 r4:c0bbe17e <4>[ 2.015178] [] (show_stack) from [] (dump_stack+0x28/0x30) <4>[ 2.022677] [] (dump_stack) from [] (__warn+0x9c/0xdc) <4>[ 2.029802] r5:00000009 r4:c0ba6d0e <4>[ 2.033652] [] (__warn) from [] (warn_slowpath_fmt+0x88/0xcc) <4>[ 2.041401] r9:c470cbc8 r8:00000000 r7:00000009 r6:c062f5b4 r5:0000004f r4:c0ba6d0e <4>[ 2.049402] [] (warn_slowpath_fmt) from [] (dt_cpufreq_probe+0xf8/0x2f0) <4>[ 2.058102] r8:00000000 r7:c470da10 r6:c470cbc0 r5:c0e08868 r4:00000000 <4>[ 2.065094] [] (dt_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.073798] r10:00000004 r9:c103178c r8:00000000 r7:c1031784 r6:c0f35e2c r5:c470da10 <4>[ 2.081884] r4:00000000 <4>[ 2.084684] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.093210] r7:c1031784 r6:c0f35e2c r5:00000000 r4:c470da10 <4>[ 2.099132] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.107747] r10:00000004 r9:00000000 r8:c0f25548 r7:c470da10 r6:c46f17fc r5:c0f35e2c <4>[ 2.115837] r4:c470da10 <4>[ 2.118639] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.127947] r8:c0f25548 r7:c470da10 r6:c46f17fc r5:c0f35e2c r4:00000001 <4>[ 2.134919] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.143965] r7:c470da54 r6:c051e3e4 r5:c46f17fc r4:00000000 <4>[ 2.149885] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.158410] r6:c470da10 r5:00000001 r4:c470da10 <4>[ 2.163302] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.172106] r7:00000000 r6:c470da10 r5:c0f254f0 r4:c470da10 <4>[ 2.178027] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.186909] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.195088] r7:00000000 r6:c0f251e8 r5:00000000 r4:c470da10 <4>[ 2.201018] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.209449] r9:c0e0b420 r8:c0e0b400 r7:05f5e100 r6:00000000 r5:00000000 r4:c470da00 <4>[ 2.217459] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.227462] r9:05f5e0ff r8:2faf0800 r7:05f5e100 r6:c46f18e0 r5:00000000 r4:c470da00 <4>[ 2.235475] [] (platform_device_register_full) from [] (raspberrypi_cpufreq_probe+0x10c/0x198) <4>[ 2.246081] r7:05f5e100 r6:c0e08868 r5:00000000 r4:00000000 <4>[ 2.252018] [] (raspberrypi_cpufreq_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.261501] r9:c103178c r8:00000000 r7:c1031784 r6:c0f35f24 r5:c470d610 r4:00000000 <4>[ 2.269502] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.278031] r7:c1031784 r6:c0f35f24 r5:00000000 r4:c470d610 <4>[ 2.283968] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.292593] r10:c470c340 r9:00000000 r8:c470d410 r7:c470d610 r6:c46f1a2c r5:c0f35f24 <4>[ 2.300681] r4:c470d610 <4>[ 2.303483] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.312791] r8:c470d410 r7:c470d610 r6:c46f1a2c r5:c0f35f24 r4:00000001 <4>[ 2.319752] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.328797] r7:c470d654 r6:c051e3e4 r5:c46f1a2c r4:00000000 <4>[ 2.334729] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.343253] r6:c470d610 r5:00000001 r4:c470d610 <4>[ 2.348134] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.356919] r7:00000000 r6:c470d610 r5:c0f254f0 r4:c470d610 <4>[ 2.362851] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.371729] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.379897] r7:00000000 r6:c0f251e8 r5:00000000 r4:c470d610 <4>[ 2.385827] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.394273] r9:c0e0b420 r8:c0e0b400 r7:00000000 r6:00000000 r5:00000000 r4:c470d600 <4>[ 2.402285] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.412288] r9:c470d410 r8:c4707150 r7:00000000 r6:c46f1b18 r5:00000000 r4:c470d600 <4>[ 2.420293] [] (platform_device_register_full) from [] (raspberrypi_clk_probe+0x160/0x31c) <4>[ 2.430553] r7:00000000 r6:00000000 r5:c470c2c0 r4:00000000 <4>[ 2.436473] [] (raspberrypi_clk_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.445609] r10:00000004 r9:c103178c r8:00000000 r7:c1031784 r6:c0f1f68c r5:c470d410 <4>[ 2.453695] r4:00000000 <4>[ 2.456495] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.465020] r7:c1031784 r6:c0f1f68c r5:00000000 r4:c470d410 <4>[ 2.470953] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.479557] r10:00000003 r9:00000000 r8:c1594c10 r7:c470d410 r6:c46f1c6c r5:c0f1f68c <4>[ 2.487649] r4:c470d410 <4>[ 2.490462] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.499759] r8:c1594c10 r7:c470d410 r6:c46f1c6c r5:c0f1f68c r4:00000001 <4>[ 2.506735] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.515782] r7:c470d454 r6:c051e3e4 r5:c46f1c6c r4:00000000 <4>[ 2.521714] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.530227] r6:c470d410 r5:00000001 r4:c470d410 <4>[ 2.535120] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.543905] r7:00000000 r6:c470d410 r5:c0f254f0 r4:c470d410 <4>[ 2.549826] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.558704] [] (bus_probe_device) from [] (device_add+0x5d4/0x6f8) <4>[ 2.566884] r7:00000000 r6:c0f251e8 r5:00000000 r4:c470d410 <4>[ 2.572814] [] (device_add) from [] (platform_device_add+0x190/0x1f8) <4>[ 2.581256] r9:c0e0b420 r8:c0e0b400 r7:c1594c00 r6:00000000 r5:00000000 r4:c470d400 <4>[ 2.589255] [] (platform_device_add) from [] (platform_device_register_full+0xf0/0x124) <4>[ 2.599257] r9:c103178c r8:00000001 r7:c1594c00 r6:c46f1d58 r5:00000000 r4:c470d400 <4>[ 2.607273] [] (platform_device_register_full) from [] (rpi_firmware_probe+0x1a4/0x1ec) <4>[ 2.617277] r7:c1594c00 r6:c1594c10 r5:c470b5c0 r4:00000000 <4>[ 2.623209] [] (rpi_firmware_probe) from [] (platform_drv_probe+0x58/0xa4) <4>[ 2.632084] r8:00000000 r7:c1031784 r6:c0f37844 r5:c1594c10 r4:00000000 <4>[ 2.639045] [] (platform_drv_probe) from [] (really_probe+0x28c/0x4a4) <4>[ 2.647571] r7:c1031784 r6:c0f37844 r5:00000000 r4:c1594c10 <4>[ 2.653502] [] (really_probe) from [] (driver_probe_device+0x194/0x1bc) <4>[ 2.662118] r10:c0f25444 r9:00000000 r8:00000000 r7:c1594c10 r6:c46f1ea4 r5:c0f37844 <4>[ 2.670194] r4:c1594c10 <4>[ 2.673006] [] (driver_probe_device) from [] (__device_attach_driver+0xb8/0xf8) <4>[ 2.682313] r8:00000000 r7:c1594c10 r6:c46f1ea4 r5:c0f37844 r4:00000001 <4>[ 2.689274] [] (__device_attach_driver) from [] (bus_for_each_drv+0xb8/0xd0) <4>[ 2.698323] r7:c1594c54 r6:c051e3e4 r5:c46f1ea4 r4:00000000 <4>[ 2.704256] [] (bus_for_each_drv) from [] (__device_attach+0xfc/0x194) <4>[ 2.712780] r6:c1594c10 r5:00000001 r4:c1594c10 <4>[ 2.717661] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) <4>[ 2.726451] r7:eb9c7300 r6:c1594c10 r5:c0f254f0 r4:c1594c10 <4>[ 2.732384] [] (device_initial_probe) from [] (bus_probe_device+0x38/0x90) <4>[ 2.741264] [] (bus_probe_device) from [] (deferred_probe_work_func+0xa8/0xcc) <4>[ 2.750484] r7:eb9c7300 r6:c0f25468 r5:c0f2542c r4:c1594c10 <4>[ 2.756407] [] (deferred_probe_work_func) from [] (process_one_work+0x194/0x274) <4>[ 2.765799] r7:eb9c7300 r6:c0e0d160 r5:c0f25440 r4:c46d6c80 <4>[ 2.771729] [] (process_one_work) from [] (worker_thread+0x220/0x2e4) <4>[ 2.780160] r10:c46da0e0 r9:c0f8fabc r8:c0e0d174 r7:c0edcaa0 r6:c0e0d160 r5:c46d6c94 <4>[ 2.788246] r4:c46d6c80 <4>[ 2.791059] [] (worker_thread) from [] (kthread+0x11c/0x128) <4>[ 2.798711] r9:c1531e98 r8:c46d6c80 r7:c0134f3c r6:c46f0000 r5:c159f200 r4:c46da0c0 <4>[ 2.806725] [] (kthread) from [] (ret_from_fork+0x14/0x2c) <4>[ 2.814208] Exception stack(0xc46f1fb0 to 0xc46f1ff8) <4>[ 2.819515] 1fa0: 00000000 00000000 00000000 00000000 <4>[ 2.827954] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 2.836397] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 <4>[ 2.843279] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0139a40 <4>[ 2.851368] r4:c159f200 r3:00000001 <4>[ 2.855197] ---[ end trace 58996bc4bee07164 ]--- <4>[ 2.862312] dwc2 3f980000.usb: supply vusb_d not found, using dummy regulator <4>[ 2.869923] dwc2 3f980000.usb: supply vusb_a not found, using dummy regulator <4>[ 2.923361] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 2.932371] dwc2 3f980000.usb: DWC OTG Controller <6>[ 2.937505] mmc0: new high speed SDHC card at address 0002 <6>[ 2.943320] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 <6>[ 2.951691] mmcblk0: mmc0:0002 NCard 14.9 GiB <6>[ 2.956549] dwc2 3f980000.usb: irq 33, io mem 0x3f980000 <6>[ 2.963340] hub 1-0:1.0: USB hub found <6>[ 2.967402] hub 1-0:1.0: 1 port detected <4>[ 2.974743] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed <6>[ 2.984544] mmcblk0: p1 <6>[ 3.320454] usb 1-1: new high-speed USB device number 2 using dwc2 <6>[ 3.571513] hub 1-1:1.0: USB hub found <6>[ 3.575635] hub 1-1:1.0: 5 ports detected <6>[ 3.900424] usb 1-1.1: new high-speed USB device number 3 using dwc2 <6>[ 4.033760] smsc95xx v2.0.0 <6>[ 4.183925] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) <6>[ 4.196467] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d2:0e:1f <6>[ 4.300434] usb 1-1.3: new high-speed USB device number 4 using dwc2 <6>[ 4.436646] usb-storage 1-1.3:1.0: USB Mass Storage device detected <6>[ 4.444257] scsi host0: usb-storage 1-1.3:1.0 <6>[ 5.124728] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup <6>[ 5.148146] smsc95xx 1-1.1:1.0 eth0: Link is Down <5>[ 5.540126] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS <5>[ 5.880447] random: crng init done <5>[ 6.481547] sd 0:0:0:0: [sda] 7669824 512-byte logical blocks: (3.93 GB/3.66 GiB) <5>[ 6.489768] sd 0:0:0:0: [sda] Write Protect is off <3>[ 6.495260] sd 0:0:0:0: [sda] No Caching mode page found <3>[ 6.500864] sd 0:0:0:0: [sda] Assuming drive cache: write through <6>[ 6.540079] sda: sda1 sda2 <5>[ 6.547036] sd 0:0:0:0: [sda] Attached SCSI removable disk <6>[ 7.222075] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 7.230484] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 7.260631] Sending DHCP requests ., OK <6>[ 7.304611] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.14 <6>[ 7.312957] IP-Config: Complete: <6>[ 7.316466] device=eth0, hwaddr=b8:27:eb:d2:0e:1f, ipaddr=192.168.201.14, mask=255.255.255.0, gw=192.168.201.1 <6>[ 7.327190] host=bcm2836-rpi-2-b-cbg-0, domain=lava-rack, nis-domain=(none) <6>[ 7.334879] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 7.334885] nameserver0=192.168.201.1 <5>[ 7.347118] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 7.376923] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 7.384218] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 7.393478] ALSA device list: <6>[ 7.396720] No soundcards found. <6>[ 7.400464] cfg80211: failed to load regulatory.db <6>[ 7.405971] uart-pl011 3f201000.serial: no DMA platform data <6>[ 7.418753] Freeing unused kernel memory: 1024K <6>[ 7.423922] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.653907] udevd[93]: starting version 3.2.9 <27>[ 7.673602] udevd[93]: specified user 'tss' unknown <27>[ 7.679104] udevd[93]: specified group 'tss' unknown <30>[ 7.690379] udevd[94]: starting eudev-3.2.9 <4>[ 8.046925] vchiq: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 8.095101] bcm2835-rng 3f104000.rng: hwrng registered <3>[ 8.192874] bcm2835_vchiq 3f00b840.mailbox: failed to set channelbase <6>[ 8.199668] vchiq: could not load vchiq done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-11330271/environment . /lava-11330271/environment / # /lava-11330271/bin/lava-test-runner /lava-11330271/0 /lava-11330271/bin/lava-test-runner /lava-11330271/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-11330271/0/tests/0_dmesg + cat uuid + UUID=11330271_1.5.<8>[ 9.475136] 2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 9.540225] <8>[ 9.600162] <8>[ 9.660152] + set +x <8>[ 9.671895] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-11330271/environment / # . /lava-11330271/environment/lava-11330271/bin/lava-test-runner /lava-11330271/1 / # /lava-11330271/bin/lava-test-runner /lava-11330271/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-11330271/1/tests/1_bootrr + cat uuid + UUID=11330271_1.5.<8>[ 10.198153] 2.4.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-11330271/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 3f902000.hdmi 3f806000.vec 3fc00000.v3d /lava-11330271/1/../bin/lava-test-case <8>[ 11.280008] /lava-11330271/1/../bin/lava-test-case <8>[ 11.334522] /lava-11330271/1/../bin/lava-test-case <8>[ 11.367448] + set +x <8>[ 11.394093] / #