connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1023965/tftp-deploy-s49agho8/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1023965/tftp-deploy-s49agho8/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1023965/tftp-deploy-s49agho8/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1023965/tftp-deploy-s49agho8/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1023965/tftp-deploy-s49agho8/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1023965/tftp-deploy-s49agho8/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 1a:e2:7c:70:5c:87 T eth0: DHCP client bound to address 10.8.254.119 Loading ARM Linux zImage '/mnt/tftp/1023965/tftp-deploy-s49agho8/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x13268000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1023965/tftp-deploy-s49agho8/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x189b869c Loading devicetree from '/mnt/tftp/1023965/tftp-deploy-s49agho8/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x13268000, initrd at 0x18000000, oftree at 0x189b9000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.209-cip44 (KernelCI@build-j100274-arm-gcc-10-imx-v6-v7-defconfig-r7l7c) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Feb 7 00:16:13 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x8a000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000008fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000008fffffff] [ 0.000000] percpu: Embedded 20 pages/cpu s51948 r8192 d21780 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1972720K/2097152K available (14336K kernel code, 2028K rwdata, 4856K rodata, 1024K init, 6663K bss, 58896K reserved, 65536K cma-reserved, 1244144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000010] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000041] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001832] Console: colour dummy device 80x30 [ 0.001887] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001909] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001931] ... MAX_LOCK_DEPTH: 48 [ 0.001952] ... MAX_LOCKDEP_KEYS: 8192 [ 0.001973] ... CLASSHASH_SIZE: 4096 [ 0.001994] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002016] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002037] ... CHAINHASH_SIZE: 32768 [ 0.002058] memory used by lock dependency info: 4061 kB [ 0.002078] memory used for stack traces: 2112 kB [ 0.002099] per task-struct memory footprint: 1536 bytes [ 0.002221] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.002263] CPU: Testing write buffer coherency: ok [ 0.002406] CPU0: Spectre v2: using BPIALL workaround [ 0.002433] pid_max: default: 32768 minimum: 301 [ 0.002823] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002872] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.007484] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.010290] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.010955] rcu: Hierarchical SRCU implementation. [ 0.013146] smp: Bringing up secondary CPUs ... [ 0.016024] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.016040] CPU1: Spectre v2: using BPIALL workaround [ 0.019304] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.019319] CPU2: Spectre v2: using BPIALL workaround [ 0.022023] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.022037] CPU3: Spectre v2: using BPIALL workaround [ 0.022604] smp: Brought up 1 node, 4 CPUs [ 0.022637] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.022663] CPU: All CPU(s) started in SVC mode. [ 0.025154] devtmpfs: initialized [ 0.059047] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.061612] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.061688] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.065828] pinctrl core: initialized pinctrl subsystem [ 0.072029] NET: Registered protocol family 16 [ 0.093899] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.098784] thermal_sys: Registered thermal governor 'step_wise' [ 0.099297] cpuidle: using governor menu [ 0.099454] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.486650] vdd1p1: supplied by regulator-dummy [ 0.506987] vdd3p0: supplied by regulator-dummy [ 0.526681] vdd2p5: supplied by regulator-dummy [ 0.546315] vddarm: supplied by regulator-dummy [ 0.567021] vddpu: supplied by regulator-dummy [ 0.586200] vddsoc: supplied by regulator-dummy [ 1.483625] No ATAGs? [ 1.484157] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 1.484259] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 1.489360] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 1.591722] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.pinctrl; cannot claim for regulator-usbotgvbus [ 1.591762] imx6q-pinctrl 20e0000.pinctrl: pin-42 (regulator-usbotgvbus) status -22 [ 1.591793] imx6q-pinctrl 20e0000.pinctrl: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.pinctrl [ 1.591822] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 1.591915] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 1.596134] vgaarb: loaded [ 1.598297] SCSI subsystem initialized [ 1.600049] usbcore: registered new interface driver usbfs [ 1.600307] usbcore: registered new interface driver hub [ 1.600472] usbcore: registered new device driver usb [ 1.600871] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator [ 1.601726] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests [ 1.602156] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator [ 1.602845] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests [ 1.606594] i2c i2c-0: IMX I2C adapter registered [ 1.614222] i2c i2c-1: IMX I2C adapter registered [ 1.619727] i2c i2c-2: IMX I2C adapter registered [ 1.620628] mc: Linux media interface: v0.10 [ 1.620768] videodev: Linux video capture interface: v2.00 [ 1.621390] pps_core: LinuxPPS API ver. 1 registered [ 1.621418] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.621489] PTP clock support registered [ 1.623209] Advanced Linux Sound Architecture Driver Initialized. [ 1.627933] Bluetooth: Core ver 2.22 [ 1.628070] NET: Registered protocol family 31 [ 1.628097] Bluetooth: HCI device and connection manager initialized [ 1.628228] Bluetooth: HCI socket layer initialized [ 1.628272] Bluetooth: L2CAP socket layer initialized [ 1.628439] Bluetooth: SCO socket layer initialized [ 1.631074] clocksource: Switched to clocksource mxc_timer1 [ 3.037424] VFS: Disk quotas dquot_6.6.0 [ 3.037613] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.070103] NET: Registered protocol family 2 [ 3.070759] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 3.073604] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 22528 bytes, linear) [ 3.074139] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 3.074310] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear) [ 3.075497] TCP: Hash tables configured (established 8192 bind 8192) [ 3.076040] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 3.076260] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 3.076993] NET: Registered protocol family 1 [ 3.079521] RPC: Registered named UNIX socket transport module. [ 3.079626] RPC: Registered udp transport module. [ 3.079655] RPC: Registered tcp transport module. [ 3.079681] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.081445] PCI: CLS 0 bytes, default 64 [ 3.083016] Trying to unpack rootfs image as initramfs... [ 4.251681] Freeing initrd memory: 9956K [ 4.253311] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 4.254142] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 4.260700] Initialise system trusted keyrings [ 4.261672] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 4.283742] NFS: Registering the id_resolver key type [ 4.283948] Key type id_resolver registered [ 4.284057] Key type id_legacy registered [ 4.284386] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 4.284507] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 4.284705] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 4.286457] fuse: init (API version 7.32) [ 4.380445] Key type asymmetric registered [ 4.380620] Asymmetric key parser 'x509' registered [ 4.381008] bounce: pool size: 64 pages [ 4.381168] io scheduler mq-deadline registered [ 4.381204] io scheduler kyber registered [ 4.403263] imx-sdma 20ec000.dma-controller: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 4.403388] imx-sdma 20ec000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin [ 4.409056] mxs-dma 110000.dma-controller: initialized [ 4.421495] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1 [ 4.422426] pfuze100-regulator 2-0008: FAB: 0, FIN: 0 [ 4.422461] pfuze100-regulator 2-0008: pfuze100 found. [ 4.454743] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 33, base_baud = 5000000) is a IMX [ 5.409274] printk: console [ttymxc0] enabled [ 5.418729] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 77, base_baud = 5000000) is a IMX [ 5.460613] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 5.467271] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 5.473736] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 5.479436] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 5.486463] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 5.492724] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 5.498854] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 5.507953] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 [ 5.526287] imx-ipuv3 2400000.ipu: IPUv3H probed [ 5.538606] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 5.546579] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 5.554514] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 5.562353] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 5.571052] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 5.587366] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 5.597930] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 5.607731] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 5.615965] imx-ipuv3 2800000.ipu: IPUv3H probed [ 5.653711] brd: module loaded [ 5.691229] loop: module loaded [ 5.697074] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 5.705316] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 5.713417] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 5.721700] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 5.729956] ahci-imx 2200000.sata: supply ahci not found, using dummy regulator [ 5.738004] ahci-imx 2200000.sata: supply phy not found, using dummy regulator [ 5.745735] ahci-imx 2200000.sata: supply target not found, using dummy regulator [ 5.756820] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 5.763921] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 5.772818] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 5.786285] scsi host0: ahci-imx [ 5.791463] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 84 [ 5.811365] CAN device driver interface [ 5.822626] pps pps0: new PPS source ptp0 [ 5.869515] fec 2188000.ethernet eth0: registered PHC device 0 [ 5.879097] usbcore: registered new interface driver r8152 [ 5.884804] usbcore: registered new interface driver lan78xx [ 5.890632] usbcore: registered new interface driver asix [ 5.896235] usbcore: registered new interface driver ax88179_178a [ 5.902515] usbcore: registered new interface driver cdc_ether [ 5.908517] usbcore: registered new interface driver smsc95xx [ 5.914431] usbcore: registered new interface driver net1080 [ 5.920218] usbcore: registered new interface driver cdc_subset [ 5.926303] usbcore: registered new interface driver zaurus [ 5.932039] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 5.939653] usbcore: registered new interface driver cdc_ncm [ 5.945378] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.951967] ehci-pci: EHCI PCI platform driver [ 5.956551] ehci-mxc: Freescale On-Chip EHCI Host driver [ 5.963039] usbcore: registered new interface driver usb-storage [ 5.989517] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 5.995920] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 6.005478] i2c /dev entries driver [ 6.023715] Bluetooth: HCI UART driver ver 2.3 [ 6.028194] Bluetooth: HCI UART protocol H4 registered [ 6.033501] Bluetooth: HCI UART protocol LL registered [ 6.042054] sdhci: Secure Digital Host Controller Interface driver [ 6.048261] sdhci: Copyright(c) Pierre Ossman [ 6.052691] sdhci-pltfm: SDHCI platform and OF driver helper [ 6.061659] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO [ 6.062461] caam 2100000.crypto: Entropy delay = 3200 [ 6.069488] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO [ 6.103028] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 6.111988] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA [ 6.112385] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 6.131131] ata1: SATA link down (SStatus 0 SControl 300) [ 6.132667] caam 2100000.crypto: Instantiated RNG4 SH0 [ 6.136990] ahci-imx 2200000.sata: no device found, disabling link. [ 6.148174] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 6.162238] mmc0: host does not support reading read-only switch, assuming write-enable [ 6.172842] mmc0: new high speed SDHC card at address 1234 [ 6.182943] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 6.193431] caam 2100000.crypto: Instantiated RNG4 SH1 [ 6.198626] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) [ 6.205325] caam 2100000.crypto: job rings = 2, qi = 0 [ 6.236434] mmc2: new DDR MMC card at address 0001 [ 6.238967] caam algorithms registered in /proc/crypto [ 6.243274] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 6.251053] caam 2100000.crypto: registering rng-caam [ 6.251998] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 6.262944] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 6.269881] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (243:0) [ 6.281665] mmcblk2: p1 p2 [ 6.378942] random: crng init done [ 6.383269] usbcore: registered new interface driver usbhid [ 6.388868] usbhid: USB HID core driver [ 6.397104] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 [ 6.405077] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 [ 6.413078] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 [ 6.421190] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 [ 6.428332] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video4 [ 6.435237] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video5 [ 6.443071] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video6 [ 6.451056] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 [ 6.477668] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 6.488342] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 6.543697] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 7.069737] NET: Registered protocol family 10 [ 7.078882] Segment Routing with IPv6 [ 7.082787] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 7.091226] NET: Registered protocol family 17 [ 7.095734] can: controller area network core [ 7.100328] NET: Registered protocol family 29 [ 7.104924] can: raw protocol [ 7.108112] can: broadcast manager protocol [ 7.112500] can: netlink gateway - max_hops=1 [ 7.117375] Key type dns_resolver registered [ 7.136193] Registering SWP/SWPB emulation handler [ 7.141634] Loading compiled-in X.509 certificates [ 7.262980] imx_usb 2184200.usb: No over current polarity defined [ 7.273876] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 7.279618] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 7.311718] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 7.321558] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 7.330216] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.337643] usb usb1: Product: EHCI Host Controller [ 7.342676] usb usb1: Manufacturer: Linux 5.10.209-cip44 ehci_hcd [ 7.348832] usb usb1: SerialNumber: ci_hdrc.0 [ 7.362592] hub 1-0:1.0: USB hub found [ 7.367146] hub 1-0:1.0: 1 port detected [ 7.396682] imx_thermal 20c8000.anatop:tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 7.419949] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.484177] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.492971] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 7.502886] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 7.511041] ALSA device list: [ 7.511614] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 7.514520] #0: imx6-wandboard-sgtl5000 [ 7.528329] #1: imx-spdif [ 7.535305] Freeing unused kernel memory: 1024K [ 7.572816] Run /init as init process [ 7.691196] usb 1-1: new high-speed USB device number 2 using ci_hdrc Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 7.912626] udevd[210]: starting version 3.2.9 [ 7.912876] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.01 [ 7.925538] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.930618] udevd[210]: specified user 'tss' unknown [ 7.932749] usb 1-1: Product: USB2.0 Hub [ 7.937917] udevd[210]: specified group 'tss' unknown [ 7.941700] usb 1-1: Manufacturer: GenesysLogic [ 7.945919] hub 1-1:1.0: USB hub found [ 7.953854] udevd[211]: starting eudev-3.2.9 [ 7.959746] hub 1-1:1.0: 4 ports detected [ 8.568589] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 8.577209] coda 2040000.vpu: Falling back to sysfs fallback for: vpu_fw_imx6q.bin [ 8.712799] ov5645 1-003c: ov5645_write_reg: write reg error -6: reg=3103, val=11 [ 8.720561] ov5645 1-003c: could not set init registers [ 8.739718] ov5645 1-003c: could not power up OV5645 done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1023965/environment . /lava-1023965/environment / # /lava-1023965/bin/lava-test-runner /lava-1023965/0 /lava-1023965/bin/lava-test-runner /lava-1023965/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1023965/0/tests/0_dmesg + cat uuid + UUID=1023965_1.5.2.3.1[ 9.993509] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 10.101871] [ 10.187215] [ 10.282046] + set +x [ 10.293075] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1023965/environment / # . /lava-1023965/environment/lava-1023965/bin/lava-test-runner /lava-1023965/1 / # /lava-1023965/bin/lava-test-runner /lava-1023965/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1023965/1/tests/1_bootrr + cat uuid + UUID=1023965_1.5.2.3.5[ 10.893228] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1023965/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 2184000.usb /lava-1023965/1/../bin/lava-test-case [ 12.056057] /lava-1023965/1/../bin/lava-test-case [ 12.154857] /lava-1023965/1/../bin/lava-test-case [ 12.210085] + set +x [ 12.249320] / #