Trying 192.168.1.205... Connected to ts5. Escape character is '^]'. ser2net port telnet,2000 device serialdev,/dev/ttyUSB-lf-bbb-01,115200n81,local [] (Debian GNU/Linux) U-Boot SPL 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) Trying to boot from MMC2 U-Boot 2021.10-nethacked-for-LAVA_hws@denx.de-dirty (Oct 19 2021 - 19:02:35 +0200) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2 0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 172.16.3.145 (90 ms) => setenv serverip 172.16.3.3 setenv serverip 172.16.3.3 => tftp 0x82000000 1089473/tftp-deploy-kbnve43t/kernel/zImage tftp 0x82000000 1089473/tftp-deploy-kbnve43t/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.145 Filename '1089473/tftp-deploy-kbnve43t/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 4.4 MiB 4.8 MiB/s done Bytes transferred = 4609920 (465780 hex) => tftp 0x83000000 1089473/tftp-deploy-kbnve43t/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1089473/tftp-deploy-kbnve43t/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.145 Filename '1089473/tftp-deploy-kbnve43t/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################## 13.5 MiB 4.8 MiB/s done Bytes transferred = 14165548 (d8262c hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1089473/tftp-deploy-kbnve43t/dtb/am335x-boneblack.dtb tftp 0x88000000 1089473/tftp-deploy-kbnve43t/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 172.16.3.3; our IP address is 172.16.3.145 Filename '1089473/tftp-deploy-kbnve43t/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 61.4 KiB 4.6 MiB/s done Bytes transferred = 62861 (f58d hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x465780 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2024-02-07 0:21:36 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 14165484 Bytes = 13.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801258c Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.209-cip44 (KernelCI@build-j100213-arm-gcc-10-omap2plus-defconfig-kbnnv) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Feb 6 23:59:01 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 20 pages/cpu s49740 r8192 d23988 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 472032K/522240K available (9216K kernel code, 1027K rwdata, 2176K rodata, 1024K init, 278K bss, 33824K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000011] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008343] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018563] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030213] Console: colour dummy device 80x30 <3>[ 0.035086] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042148] This ensures that you still see kernel messages. Please <3>[ 0.048875] update your kernel commandline. <6>[ 0.053475] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095539] CPU: Testing write buffer coherency: ok <6>[ 0.100915] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106380] pid_max: default: 32768 minimum: 301 <6>[ 0.111538] LSM: Security Framework initializing <6>[ 0.116639] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.124457] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.134109] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.140609] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.147807] rcu: Hierarchical SRCU implementation. <6>[ 0.153596] smp: Bringing up secondary CPUs ... <6>[ 0.158532] smp: Brought up 1 node, 1 CPU <6>[ 0.162959] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.169689] CPU: All CPU(s) started in SVC mode. <6>[ 0.175416] devtmpfs: initialized <6>[ 0.191050] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.199635] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.210079] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.218557] pinctrl core: initialized pinctrl subsystem <6>[ 0.226218] NET: Registered protocol family 16 <6>[ 0.233809] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.260260] l3-aon-clkctrl:0000:0: failed to disable <6>[ 0.266342] audit: initializing netlink subsys (disabled) <6>[ 0.273401] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.273414] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.280024] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.286762] cpuidle: using governor menu <5>[ 1.145976] audit: type=2000 audit(0.230:1): state=initialized audit_enabled=0 res=1 <6>[ 1.268588] No ATAGs? <6>[ 1.271264] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 1.295333] Kprobes globally optimized <6>[ 1.308457] iommu: Default domain type: Translated <6>[ 1.315615] vgaarb: loaded <5>[ 1.319320] SCSI subsystem initialized <6>[ 1.324610] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.330093] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.339814] PTP clock support registered <6>[ 1.345365] clocksource: Switched to clocksource dmtimer <5>[ 1.984218] VFS: Disk quotas dquot_6.6.0 <6>[ 1.988733] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 2.005646] NET: Registered protocol family 2 <6>[ 2.010691] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 2.019364] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) <6>[ 2.028320] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 2.036615] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) <6>[ 2.044274] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 2.051222] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.058253] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 2.065891] NET: Registered protocol family 1 <6>[ 2.071656] RPC: Registered named UNIX socket transport module. <6>[ 2.078125] RPC: Registered udp transport module. <6>[ 2.083231] RPC: Registered tcp transport module. <6>[ 2.088358] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 2.095288] PCI: CLS 0 bytes, default 64 <6>[ 2.100313] Trying to unpack rootfs image as initramfs... <6>[ 3.086635] Freeing initrd memory: 13836K <6>[ 3.092215] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 3.102642] Initialise system trusted keyrings <6>[ 3.108076] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 3.116301] NFS: Registering the id_resolver key type <5>[ 3.121853] Key type id_resolver registered <5>[ 3.126496] Key type id_legacy registered <6>[ 3.130947] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 3.138932] Key type asymmetric registered <5>[ 3.143422] Asymmetric key parser 'x509' registered <6>[ 3.148771] io scheduler mq-deadline registered <6>[ 3.153701] io scheduler kyber registered <3>[ 3.289174] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.297871] omap_gpio 44e07000.gpio: Could not register gpio chip -517 <4>[ 3.404736] ti-sysc: probe of 44e31000.target-module failed with error -16 <4>[ 3.446401] ti-sysc: probe of 48040000.target-module failed with error -16 <3>[ 3.516986] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.525681] omap_gpio 4804c000.gpio: Could not register gpio chip -517 <3>[ 3.584612] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.593331] omap_gpio 481ac000.gpio: Could not register gpio chip -517 <3>[ 3.610664] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517 <3>[ 3.619352] omap_gpio 481ae000.gpio: Could not register gpio chip -517 <3>[ 3.681961] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 3.690529] edma 49000000.dma: TI EDMA DMA engine driver <6>[ 3.717429] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 3.731944] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <6>[ 3.742882] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250 <6>[ 3.752319] printk: console [ttyS0] enabled <6>[ 3.752319] printk: console [ttyS0] enabled <6>[ 3.761387] printk: bootconsole [omap8250] disabled <6>[ 3.761387] printk: bootconsole [omap8250] disabled <6>[ 3.785025] brd: module loaded <6>[ 3.795918] loop: module loaded <3>[ 3.801359] mtdoops: mtd device (mtddev=name/number) must be supplied <6>[ 3.865407] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 3.907941] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 3.917862] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 3.924516] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 3.930365] cpsw 4a100000.ethernet: cpts: overflow check period 500 (jiffies) <6>[ 3.937928] cpsw 4a100000.ethernet: Detected MACID = 34:03:de:5e:2c:05 <6>[ 3.946976] i2c /dev entries driver <5>[ 3.952504] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 3.960435] sdhci: Secure Digital Host Controller Interface driver <6>[ 3.966983] sdhci: Copyright(c) Pierre Ossman <6>[ 3.972321] sdhci-pltfm: SDHCI platform and OF driver helper <4>[ 3.980641] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 3.990431] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.998909] Initializing XFRM netlink socket <6>[ 4.003709] NET: Registered protocol family 10 <6>[ 4.010144] Segment Routing with IPv6 <6>[ 4.014194] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 4.021276] NET: Registered protocol family 17 <6>[ 4.026123] NET: Registered protocol family 15 <5>[ 4.030964] Key type dns_resolver registered <6>[ 4.036153] oprofile: using arm/armv7 <6>[ 4.040195] ThumbEE CPU extension supported. <5>[ 4.044761] Registering SWP/SWPB emulation handler <3>[ 4.050320] omap_voltage_late_init: Voltage driver support not added <3>[ 4.057039] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize <3>[ 4.065455] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize <6>[ 4.074121] SmartReflex Class3 initialized <6>[ 4.079081] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <5>[ 4.087990] Loading compiled-in X.509 certificates <6>[ 4.113108] OMAP GPIO hardware version 0.1 <4>[ 4.146038] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 4.159744] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 4.168568] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 4.174894] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 4.184852] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 4.196404] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 4.205504] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 4.210663] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <6>[ 4.223895] mmc1: new high speed MMC card at address 0001 <6>[ 4.230755] mmcblk1: mmc1:0001 M62704 3.56 GiB <6>[ 4.236323] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB <6>[ 4.242988] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB <6>[ 4.249600] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB, chardev (249:0) <6>[ 4.259114] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 4.268103] mmcblk1: p1 <6>[ 4.276350] cpsw 4a100000.ethernet: initializing cpsw version 1.12 (0) <6>[ 4.366890] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 6.446017] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 6.455351] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 6.485459] Sending DHCP requests ., OK <6>[ 6.629443] IP-Config: Got DHCP answer from 172.16.3.3, my address is 172.16.3.145 <6>[ 6.637344] IP-Config: Complete: <6>[ 6.640854] device=eth0, hwaddr=34:03:de:5e:2c:05, ipaddr=172.16.3.145, mask=255.255.255.0, gw=172.16.3.3 <6>[ 6.651185] host=172.16.3.145, domain=denx.de, nis-domain=(none) <6>[ 6.657934] bootserver=172.16.3.33, rootserver=172.16.3.33, rootpath= <6>[ 6.657941] nameserver0=172.16.3.3 <6>[ 6.669237] ntpserver0=172.16.3.3 <6>[ 6.676141] Freeing unused kernel memory: 1024K <6>[ 6.695821] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 6.930747] udevd[100]: starting version 3.2.9 <5>[ 6.937486] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 6.944627] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 6.952259] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 6.969557] udevd[100]: specified user 'tss' unknown <27>[ 6.975132] udevd[100]: specified group 'tss' unknown <30>[ 6.987685] udevd[101]: starting eudev-3.2.9 <6>[ 7.799501] remoteproc remoteproc0: wkup_m3 is available <4>[ 7.831028] am335x-phy-driver 47401300.usb-phy: supply vcc not found, using dummy regulator <4>[ 7.840257] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 7.945812] usbcore: registered new interface driver usbfs <6>[ 7.951671] usbcore: registered new interface driver hub <6>[ 7.957492] usbcore: registered new device driver usb <4>[ 8.088799] am335x-phy-driver 47401b00.usb-phy: supply vcc not found, using dummy regulator <4>[ 8.097928] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests <6>[ 8.311732] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 8.317569] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 8.525843] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 8.534464] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.542073] usb usb1: Product: MUSB HDRC host driver <6>[ 8.547350] usb usb1: Manufacturer: Linux 5.10.209-cip44 musb-hcd <6>[ 8.553731] usb usb1: SerialNumber: musb-hdrc.1 <4>[ 8.600283] at24 0-0050: supply vcc not found, using dummy regulator <6>[ 8.705808] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <4>[ 8.713465] at24 2-0054: supply vcc not found, using dummy regulator <3>[ 8.814577] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <4>[ 8.869538] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <4>[ 8.929848] at24 2-0055: supply vcc not found, using dummy regulator <6>[ 8.955906] hub 1-0:1.0: USB hub found <6>[ 8.970075] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <6>[ 8.985749] hub 1-0:1.0: 1 port detected <6>[ 9.002265] input: tps65217_pwrbutton as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <4>[ 9.047987] at24 2-0056: supply vcc not found, using dummy regulator <3>[ 9.077227] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 9.117792] omap_rtc 44e3e000.rtc: registered as rtc0 <6>[ 9.123216] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) <4>[ 9.136182] at24 2-0057: supply vcc not found, using dummy regulator <3>[ 9.146825] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 9.248398] tda998x 0-0070: found TDA19988 <3>[ 9.314063] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 9.754701] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <6>[ 9.809828] remoteproc remoteproc0: powering up wkup_m3 <3>[ 9.851014] davinci-mcasp 48038000.mcasp: IRQ common not found <4>[ 9.874663] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 9.884612] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 9.890885] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <6>[ 10.549329] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 10.556719] random: crng init done <6>[ 10.587149] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_driver_exit [tda998x]) <6>[ 10.629227] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0 <6>[ 10.670880] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 10.688881] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <3>[ 10.851700] PM: Cannot get wkup_m3_ipc handle <6>[ 11.093807] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 <6>[ 11.138760] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 <6>[ 11.195615] omap-sham 53100000.sham: will run requests pump with realtime priority <6>[ 11.220998] omap-aes 53500000.aes: will run requests pump with realtime priority <3>[ 11.307488] PM: Cannot get wkup_m3_ipc handle <3>[ 11.329882] PM: Cannot get wkup_m3_ipc handle <3>[ 11.805679] PM: Cannot get wkup_m3_ipc handle <3>[ 11.836449] PM: Cannot get wkup_m3_ipc handle done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1089473/environment . /lava-1089473/environment / # /lava-1089473/bin/lava-test-runner /lava-1089473/0 /lava-1089473/bin/lava-test-runner /lava-1089473/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1089473/0/tests/0_dmesg + cat uuid + UUID=1089473_1.5.2.4.1 + <8>[ 12.774470] set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 12.840084] <8>[ 12.900543] <8>[ 12.960712] + set +x <8>[ 12.971999] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1089473/environment / # . /lava-1089473/environment/lava-1089473/bin/lava-test-runner /lava-1089473/1 / # /lava-1089473/bin/lava-test-runner /lava-1089473/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1089473/1/tests/1_bootrr + cat uuid + UUID=1089473_1.5.2.4.5 <8>[ 13.514167] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1089473/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto pm33xx /lava-1089473/1/../bin/lava-test-case <8>[ 14.617343] /lava-1089473/1/../bin/lava-test-case <8>[ 14.672584] /lava-1089473/1/../bin/lava-test-case <8>[ 14.705865] /lava-1089473/1/../bin/lava-test-case <8>[ 14.767527] /lava-1089473/1/../bin/lava-test-case <8>[ 14.818124] /lava-1089473/1/../bin/lava-test-case <8>[ 14.858703] /lava-1089473/1/../bin/lava-test-case <8>[ 14.909874] /lava-1089473/1/../bin/lava-test-case <8>[ 14.976661] /lava-1089473/1/../bin/lava-test-case <8>[ 15.017480] /lava-1089473/1/../bin/lava-test-case <8>[ 15.067847] /lava-1089473/1/../bin/lava-test-case <8>[ 15.108156] /lava-1089473/1/../bin/lava-test-case <8>[ 15.158371] /lava-1089473/1/../bin/lava-test-case <8>[ 15.198825] /lava-1089473/1/../bin/lava-test-case <8>[ 15.239122] /lava-1089473/1/../bin/lava-test-case <8>[ 15.279633] /lava-1089473/1/../bin/lava-test-case <8>[ 15.329447] /lava-1089473/1/../bin/lava-test-case <8>[ 15.370881] /lava-1089473/1/../bin/lava-test-case <8>[ 15.421972] /lava-1089473/1/../bin/lava-test-case <8>[ 15.471764] /lava-1089473/1/../bin/lava-test-case <8>[ 15.512124] /lava-1089473/1/../bin/lava-test-case <8>[ 15.563058] /lava-1089473/1/../bin/lava-test-case <8>[ 15.613704] /lava-1089473/1/../bin/lava-test-case <8>[ 15.655130] /lava-1089473/1/../bin/lava-test-case <8>[ 15.706460] /lava-1089473/1/../bin/lava-test-case <8>[ 15.747703] /lava-1089473/1/../bin/lava-test-case <8>[ 15.797914] /lava-1089473/1/../bin/lava-test-case <8>[ 15.838654] /lava-1089473/1/../bin/lava-test-case <8>[ 16.916197] /lava-1089473/1/../bin/lava-test-case <8>[ 16.957603] /lava-1089473/1/../bin/lava-test-case <8>[ 17.008784] /lava-1089473/1/../bin/lava-test-case <8>[ 17.049939] /lava-1089473/1/../bin/lava-test-case <8>[ 17.100578] /lava-1089473/1/../bin/lava-test-case <8>[ 17.140983] /lava-1089473/1/../bin/lava-test-case <8>[ 17.191956] /lava-1089473/1/../bin/lava-test-case <8>[ 17.232181] /lava-1089473/1/../bin/lava-test-case <8>[ 17.283146] /lava-1089473/1/../bin/lava-test-case <8>[ 17.323547] /lava-1089473/1/../bin/lava-test-case <8>[ 17.374591] /lava-1089473/1/../bin/lava-test-case <8>[ 17.415712] /lava-1089473/1/../bin/lava-test-case <8>[ 17.466476] /lava-1089473/1/../bin/lava-test-case <8>[ 17.506931] /lava-1089473/1/../bin/lava-test-case <8>[ 17.557623] /lava-1089473/1/../bin/lava-test-case <8>[ 17.597937] /lava-1089473/1/../bin/lava-test-case <8>[ 17.648232] /lava-1089473/1/../bin/lava-test-case <8>[ 17.688854] /lava-1089473/1/../bin/lava-test-case <8>[ 17.739148] /lava-1089473/1/../bin/lava-test-case <8>[ 17.779810] /lava-1089473/1/../bin/lava-test-case <8>[ 17.830364] /lava-1089473/1/../bin/lava-test-case <8>[ 17.871119] /opt/bootrr/libexec/bootrr/boards/ti,am335x-bone-black: line 84: assert_device-present: not found /lava-1089473/1/../bin/lava-test-case <8>[ 17.914147] /lava-1089473/1/../bin/lava-test-case <8>[ 17.965139] /lava-1089473/1/../bin/lava-test-case <8>[ 18.013551] + set +x <8>[ 18.030878] / #