Boot log: beagle-xm
- Errors: 4
- Kernel Errors: 10
- Boot result: FAIL
- Warnings: 2
- Kernel Warnings: 46
1 20:09:26.469242 lava-dispatcher, installed at version: 2024.05
2 20:09:26.469629 start: 0 validate
3 20:09:26.469915 Start time: 2024-06-27 20:09:26.469893+00:00 (UTC)
4 20:09:26.470270 Validating that http://storage.kernelci.org/images/rootfs/buildroot/buildroot-baseline/20230703.0/armel/rootfs.cpio.gz exists
5 20:09:26.497934 Validating that http://storage.kernelci.org/mainline/master/v6.10-rc5-175-g6d6444ba82053/arm/multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y/gcc-10/kernel/zImage exists
6 20:09:26.568876 Validating that http://storage.kernelci.org/mainline/master/v6.10-rc5-175-g6d6444ba82053/arm/multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y/gcc-10/dtbs/ti/omap/omap3-beagle-xm.dtb exists
7 20:09:26.626918 Validating that http://storage.kernelci.org/mainline/master/v6.10-rc5-175-g6d6444ba82053/arm/multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y/gcc-10/modules.tar.xz exists
8 20:09:26.642580 validate duration: 0.17
10 20:09:26.643194 start: 1 tftp-deploy (timeout 00:10:00) [common]
11 20:09:26.643526 start: 1.1 download-retry (timeout 00:10:00) [common]
12 20:09:26.643762 start: 1.1.1 http-download (timeout 00:10:00) [common]
13 20:09:26.644063 Not decompressing ramdisk as can be used compressed.
14 20:09:26.644256 downloading http://storage.kernelci.org/images/rootfs/buildroot/buildroot-baseline/20230703.0/armel/rootfs.cpio.gz
15 20:09:26.644415 saving as /var/lib/lava/dispatcher/tmp/3866970/tftp-deploy-ek4rcx2f/ramdisk/rootfs.cpio.gz
16 20:09:26.644536 total size: 7888422 (7 MB)
17 20:09:26.770978 progress 0 % (0 MB)
18 20:09:26.859229 progress 5 % (0 MB)
19 20:09:26.963093 progress 10 % (0 MB)
20 20:09:27.036753 progress 15 % (1 MB)
21 20:09:27.114456 progress 20 % (1 MB)
22 20:09:27.277852 progress 25 % (1 MB)
23 20:09:27.536593 progress 30 % (2 MB)
24 20:09:27.698600 progress 35 % (2 MB)
25 20:09:27.946809 progress 40 % (3 MB)
26 20:09:28.372214 progress 45 % (3 MB)
27 20:09:28.475048 progress 50 % (3 MB)
28 20:09:28.650043 progress 55 % (4 MB)
29 20:09:28.899090 progress 60 % (4 MB)
30 20:09:29.097004 progress 65 % (4 MB)
31 20:09:29.252650 progress 70 % (5 MB)
32 20:09:29.449331 progress 75 % (5 MB)
33 20:09:29.669560 progress 80 % (6 MB)
34 20:09:29.822156 progress 85 % (6 MB)
35 20:09:29.857168 progress 90 % (6 MB)
36 20:09:29.892696 progress 95 % (7 MB)
37 20:09:30.030805 progress 100 % (7 MB)
38 20:09:30.031251 7 MB downloaded in 3.39 s (2.22 MB/s)
39 20:09:30.031532 end: 1.1.1 http-download (duration 00:00:03) [common]
41 20:09:30.031935 end: 1.1 download-retry (duration 00:00:03) [common]
42 20:09:30.032083 start: 1.2 download-retry (timeout 00:09:57) [common]
43 20:09:30.032220 start: 1.2.1 http-download (timeout 00:09:57) [common]
44 20:09:30.032478 downloading http://storage.kernelci.org/mainline/master/v6.10-rc5-175-g6d6444ba82053/arm/multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y/gcc-10/kernel/zImage
45 20:09:30.032596 saving as /var/lib/lava/dispatcher/tmp/3866970/tftp-deploy-ek4rcx2f/kernel/zImage
46 20:09:30.032698 total size: 10592768 (10 MB)
47 20:09:30.032799 No compression specified
48 20:09:30.059005 progress 0 % (0 MB)
49 20:09:30.327021 progress 5 % (0 MB)
50 20:09:30.696255 progress 10 % (1 MB)
51 20:09:30.929061 progress 15 % (1 MB)
52 20:09:31.345642 progress 20 % (2 MB)
53 20:09:31.639225 progress 25 % (2 MB)
54 20:09:31.801324 progress 30 % (3 MB)
55 20:09:31.988298 progress 35 % (3 MB)
56 20:09:32.035801 progress 40 % (4 MB)
57 20:09:32.325673 progress 45 % (4 MB)
58 20:09:32.545346 progress 50 % (5 MB)
59 20:09:33.315636 progress 55 % (5 MB)
60 20:09:33.438794 progress 60 % (6 MB)
61 20:09:33.582226 progress 65 % (6 MB)
62 20:09:33.818536 progress 70 % (7 MB)
63 20:09:34.055411 progress 75 % (7 MB)
64 20:09:34.380553 progress 80 % (8 MB)
65 20:09:34.502874 progress 85 % (8 MB)
66 20:09:34.710214 progress 90 % (9 MB)
67 20:09:34.980251 progress 95 % (9 MB)
68 20:09:35.192622 progress 100 % (10 MB)
69 20:09:35.192948 10 MB downloaded in 5.16 s (1.96 MB/s)
70 20:09:35.193199 end: 1.2.1 http-download (duration 00:00:05) [common]
72 20:09:35.193571 end: 1.2 download-retry (duration 00:00:05) [common]
73 20:09:35.193719 start: 1.3 download-retry (timeout 00:09:51) [common]
74 20:09:35.193854 start: 1.3.1 http-download (timeout 00:09:51) [common]
75 20:09:35.194089 downloading http://storage.kernelci.org/mainline/master/v6.10-rc5-175-g6d6444ba82053/arm/multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y/gcc-10/dtbs/ti/omap/omap3-beagle-xm.dtb
76 20:09:35.194203 saving as /var/lib/lava/dispatcher/tmp/3866970/tftp-deploy-ek4rcx2f/dtb/omap3-beagle-xm.dtb
77 20:09:35.194299 total size: 70089 (0 MB)
78 20:09:35.194397 No compression specified
79 20:09:35.269518 progress 46 % (0 MB)
80 20:09:35.296332 progress 93 % (0 MB)
81 20:09:35.297153 progress 100 % (0 MB)
82 20:09:35.297483 0 MB downloaded in 0.10 s (0.65 MB/s)
83 20:09:35.297838 end: 1.3.1 http-download (duration 00:00:00) [common]
85 20:09:35.298445 end: 1.3 download-retry (duration 00:00:00) [common]
86 20:09:35.298665 start: 1.4 download-retry (timeout 00:09:51) [common]
87 20:09:35.298889 start: 1.4.1 http-download (timeout 00:09:51) [common]
88 20:09:35.299218 downloading http://storage.kernelci.org/mainline/master/v6.10-rc5-175-g6d6444ba82053/arm/multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y/gcc-10/modules.tar.xz
89 20:09:35.299393 saving as /var/lib/lava/dispatcher/tmp/3866970/tftp-deploy-ek4rcx2f/modules/modules.tar
90 20:09:35.299552 total size: 6726764 (6 MB)
91 20:09:35.299718 Using unxz to decompress xz
92 20:09:35.324797 progress 0 % (0 MB)
93 20:09:35.425085 progress 5 % (0 MB)
94 20:09:35.558212 progress 10 % (0 MB)
95 20:09:35.736873 progress 15 % (0 MB)
96 20:09:35.800964 progress 20 % (1 MB)
97 20:09:35.859497 progress 25 % (1 MB)
98 20:09:36.039404 progress 30 % (1 MB)
99 20:09:36.419931 progress 35 % (2 MB)
100 20:09:36.590015 progress 40 % (2 MB)
101 20:09:36.744566 progress 45 % (2 MB)
102 20:09:36.889194 progress 50 % (3 MB)
103 20:09:36.965131 progress 55 % (3 MB)
104 20:09:37.104228 progress 60 % (3 MB)
105 20:09:37.191420 progress 65 % (4 MB)
106 20:09:37.250064 progress 70 % (4 MB)
107 20:09:37.307267 progress 75 % (4 MB)
108 20:09:37.343395 progress 80 % (5 MB)
109 20:09:37.382411 progress 85 % (5 MB)
110 20:09:37.418737 progress 90 % (5 MB)
111 20:09:37.460652 progress 95 % (6 MB)
112 20:09:37.495485 progress 100 % (6 MB)
113 20:09:37.504637 6 MB downloaded in 2.21 s (2.91 MB/s)
114 20:09:37.505022 end: 1.4.1 http-download (duration 00:00:02) [common]
116 20:09:37.505590 end: 1.4 download-retry (duration 00:00:02) [common]
117 20:09:37.505757 start: 1.5 prepare-tftp-overlay (timeout 00:09:49) [common]
118 20:09:37.505921 start: 1.5.1 extract-nfsrootfs (timeout 00:09:49) [common]
119 20:09:37.506082 end: 1.5.1 extract-nfsrootfs (duration 00:00:00) [common]
120 20:09:37.506233 start: 1.5.2 lava-overlay (timeout 00:09:49) [common]
121 20:09:37.506546 [common] Preparing overlay tarball in /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d
122 20:09:37.506777 makedir: /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin
123 20:09:37.506974 makedir: /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/tests
124 20:09:37.507162 makedir: /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/results
125 20:09:37.507345 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-add-keys
126 20:09:37.507614 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-add-sources
127 20:09:37.507882 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-background-process-start
128 20:09:37.508184 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-background-process-stop
129 20:09:37.508507 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-common-functions
130 20:09:37.508754 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-echo-ipv4
131 20:09:37.509018 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-install-packages
132 20:09:37.509266 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-installed-packages
133 20:09:37.509516 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-os-build
134 20:09:37.509766 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-probe-channel
135 20:09:37.510016 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-probe-ip
136 20:09:37.510241 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-target-ip
137 20:09:37.510475 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-target-mac
138 20:09:37.510730 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-target-storage
139 20:09:37.511034 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-test-case
140 20:09:37.511273 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-test-event
141 20:09:37.511488 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-test-feedback
142 20:09:37.511706 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-test-raise
143 20:09:37.511921 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-test-reference
144 20:09:37.512172 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-test-runner
145 20:09:37.512418 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-test-set
146 20:09:37.512671 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-test-shell
147 20:09:37.512937 Updating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-install-packages (oe)
148 20:09:37.799284 Updating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/bin/lava-installed-packages (oe)
149 20:09:38.019996 Creating /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/environment
150 20:09:38.020374 LAVA metadata
151 20:09:38.020575 - LAVA_JOB_ID=3866970
152 20:09:38.020752 - LAVA_DISPATCHER_IP=192.168.0.2
153 20:09:38.021036 start: 1.5.2.1 ssh-authorize (timeout 00:09:49) [common]
154 20:09:38.021758 end: 1.5.2.1 ssh-authorize (duration 00:00:00) [common]
155 20:09:38.022039 start: 1.5.2.2 lava-vland-overlay (timeout 00:09:49) [common]
156 20:09:38.022231 skipped lava-vland-overlay
157 20:09:38.022448 end: 1.5.2.2 lava-vland-overlay (duration 00:00:00) [common]
158 20:09:38.022676 start: 1.5.2.3 lava-multinode-overlay (timeout 00:09:49) [common]
159 20:09:38.022854 skipped lava-multinode-overlay
160 20:09:38.023070 end: 1.5.2.3 lava-multinode-overlay (duration 00:00:00) [common]
161 20:09:38.023312 start: 1.5.2.4 test-definition (timeout 00:09:49) [common]
162 20:09:38.023523 Loading test definitions
163 20:09:38.023767 start: 1.5.2.4.1 inline-repo-action (timeout 00:09:49) [common]
164 20:09:38.023973 Using /lava-3866970 at stage 0
165 20:09:38.024874 uuid=3866970_1.5.2.4.1 testdef=None
166 20:09:38.025127 end: 1.5.2.4.1 inline-repo-action (duration 00:00:00) [common]
167 20:09:38.025376 start: 1.5.2.4.2 test-overlay (timeout 00:09:49) [common]
168 20:09:38.026689 end: 1.5.2.4.2 test-overlay (duration 00:00:00) [common]
170 20:09:38.027306 start: 1.5.2.4.3 test-install-overlay (timeout 00:09:49) [common]
171 20:09:38.275337 end: 1.5.2.4.3 test-install-overlay (duration 00:00:00) [common]
173 20:09:38.276023 start: 1.5.2.4.4 test-runscript-overlay (timeout 00:09:48) [common]
174 20:09:38.964820 runner path: /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/0/tests/0_dmesg test_uuid 3866970_1.5.2.4.1
175 20:09:38.965312 end: 1.5.2.4.4 test-runscript-overlay (duration 00:00:01) [common]
177 20:09:38.965922 Creating lava-test-runner.conf files
178 20:09:38.966090 Using lava-test-runner path: /var/lib/lava/dispatcher/tmp/3866970/lava-overlay-09zlnu4d/lava-3866970/0 for stage 0
179 20:09:38.966329 - 0_dmesg
180 20:09:38.966600 end: 1.5.2.4 test-definition (duration 00:00:01) [common]
181 20:09:38.966825 start: 1.5.2.5 compress-overlay (timeout 00:09:48) [common]
182 20:09:38.983087 end: 1.5.2.5 compress-overlay (duration 00:00:00) [common]
183 20:09:38.983505 start: 1.5.2.6 persistent-nfs-overlay (timeout 00:09:48) [common]
184 20:09:38.983801 end: 1.5.2.6 persistent-nfs-overlay (duration 00:00:00) [common]
185 20:09:38.984080 end: 1.5.2 lava-overlay (duration 00:00:01) [common]
186 20:09:38.984376 start: 1.5.3 extract-overlay-ramdisk (timeout 00:09:48) [common]
187 20:09:39.362884 end: 1.5.3 extract-overlay-ramdisk (duration 00:00:00) [common]
188 20:09:39.363139 start: 1.5.4 extract-modules (timeout 00:09:47) [common]
189 20:09:39.363299 extracting modules file /var/lib/lava/dispatcher/tmp/3866970/tftp-deploy-ek4rcx2f/modules/modules.tar to /var/lib/lava/dispatcher/tmp/3866970/extract-overlay-ramdisk-4b1v43yt/ramdisk
190 20:09:39.772536 end: 1.5.4 extract-modules (duration 00:00:00) [common]
191 20:09:39.772795 start: 1.5.5 apply-overlay-tftp (timeout 00:09:47) [common]
192 20:09:39.772988 [common] Applying overlay /var/lib/lava/dispatcher/tmp/3866970/compress-overlay-e5qlvi0r/overlay-1.5.2.5.tar.gz to ramdisk
193 20:09:39.773113 [common] Applying overlay /var/lib/lava/dispatcher/tmp/3866970/compress-overlay-e5qlvi0r/overlay-1.5.2.5.tar.gz to directory /var/lib/lava/dispatcher/tmp/3866970/extract-overlay-ramdisk-4b1v43yt/ramdisk
194 20:09:39.785911 end: 1.5.5 apply-overlay-tftp (duration 00:00:00) [common]
195 20:09:39.786143 start: 1.5.6 prepare-kernel (timeout 00:09:47) [common]
196 20:09:39.786329 start: 1.5.6.1 uboot-prepare-kernel (timeout 00:09:47) [common]
197 20:09:39.786502 end: 1.5.6.1 uboot-prepare-kernel (duration 00:00:00) [common]
198 20:09:39.786656 end: 1.5.6 prepare-kernel (duration 00:00:00) [common]
199 20:09:39.786818 start: 1.5.7 configure-preseed-file (timeout 00:09:47) [common]
200 20:09:39.786968 end: 1.5.7 configure-preseed-file (duration 00:00:00) [common]
201 20:09:39.787123 start: 1.5.8 compress-ramdisk (timeout 00:09:47) [common]
202 20:09:39.787251 Building ramdisk /var/lib/lava/dispatcher/tmp/3866970/extract-overlay-ramdisk-4b1v43yt/ramdisk.cpio containing /var/lib/lava/dispatcher/tmp/3866970/extract-overlay-ramdisk-4b1v43yt/ramdisk
203 20:09:50.156260 >> 95725 blocks
204 20:09:54.800411 Adding RAMdisk u-boot header.
205 20:09:54.800715 mkimage -A arm -T ramdisk -C none -d /var/lib/lava/dispatcher/tmp/3866970/extract-overlay-ramdisk-4b1v43yt/ramdisk.cpio.gz /var/lib/lava/dispatcher/tmp/3866970/extract-overlay-ramdisk-4b1v43yt/ramdisk.cpio.gz.uboot
206 20:09:56.740209 output: Image Name:
207 20:09:56.740486 output: Created: Thu Jun 27 20:09:54 2024
208 20:09:56.740648 output: Image Type: ARM Linux RAMDisk Image (uncompressed)
209 20:09:56.740793 output: Data Size: 17472170 Bytes = 17062.67 KiB = 16.66 MiB
210 20:09:56.740940 output: Load Address: 00000000
211 20:09:56.741084 output: Entry Point: 00000000
212 20:09:56.741227 output:
213 20:09:56.741472 rename /var/lib/lava/dispatcher/tmp/3866970/extract-overlay-ramdisk-4b1v43yt/ramdisk.cpio.gz.uboot to /var/lib/lava/dispatcher/tmp/3866970/tftp-deploy-ek4rcx2f/ramdisk/ramdisk.cpio.gz.uboot
214 20:09:56.741736 end: 1.5.8 compress-ramdisk (duration 00:00:17) [common]
215 20:09:56.741957 end: 1.5 prepare-tftp-overlay (duration 00:00:19) [common]
216 20:09:56.742170 start: 1.6 lxc-create-udev-rule-action (timeout 00:09:30) [common]
217 20:09:56.742347 No LXC device requested
218 20:09:56.742540 end: 1.6 lxc-create-udev-rule-action (duration 00:00:00) [common]
219 20:09:56.742734 start: 1.7 deploy-device-env (timeout 00:09:30) [common]
220 20:09:56.742919 end: 1.7 deploy-device-env (duration 00:00:00) [common]
221 20:09:56.743077 Checking files for TFTP limit of 4294967296 bytes.
222 20:09:56.744123 end: 1 tftp-deploy (duration 00:00:30) [common]
223 20:09:56.744417 start: 2 uboot-action (timeout 00:05:00) [common]
224 20:09:56.744634 start: 2.1 uboot-from-media (timeout 00:05:00) [common]
225 20:09:56.744835 end: 2.1 uboot-from-media (duration 00:00:00) [common]
226 20:09:56.745022 start: 2.2 bootloader-overlay (timeout 00:05:00) [common]
227 20:09:56.745306 substitutions:
228 20:09:56.745470 - {BOOTX}: bootz 0x81000000 0x82000000 0x81f00000
229 20:09:56.746062 - {DTB_ADDR}: 0x81f00000
230 20:09:56.746237 - {DTB}: 3866970/tftp-deploy-ek4rcx2f/dtb/omap3-beagle-xm.dtb
231 20:09:56.746392 - {INITRD}: 3866970/tftp-deploy-ek4rcx2f/ramdisk/ramdisk.cpio.gz.uboot
232 20:09:56.746542 - {KERNEL_ADDR}: 0x81000000
233 20:09:56.746688 - {KERNEL}: 3866970/tftp-deploy-ek4rcx2f/kernel/zImage
234 20:09:56.746832 - {LAVA_MAC}: None
235 20:09:56.746995 - {PRESEED_CONFIG}: None
236 20:09:56.747140 - {PRESEED_LOCAL}: None
237 20:09:56.747283 - {RAMDISK_ADDR}: 0x82000000
238 20:09:56.747425 - {RAMDISK}: 3866970/tftp-deploy-ek4rcx2f/ramdisk/ramdisk.cpio.gz.uboot
239 20:09:56.747569 - {ROOT_PART}: None
240 20:09:56.747710 - {ROOT}: None
241 20:09:56.747850 - {SERVER_IP}: 192.168.0.2
242 20:09:56.747992 - {TEE_ADDR}: 0x83000000
243 20:09:56.748135 - {TEE}: None
244 20:09:56.748275 Parsed boot commands:
245 20:09:56.748447 - setenv usbethaddr 00:40:5c:26:0a:6c; usb start
246 20:09:56.748593 - setenv autoload no
247 20:09:56.748734 - dhcp
248 20:09:56.748878 - setenv serverip 192.168.0.2
249 20:09:56.749018 - tftp 0x81000000 3866970/tftp-deploy-ek4rcx2f/kernel/zImage
250 20:09:56.749161 - tftp 0x82000000 3866970/tftp-deploy-ek4rcx2f/ramdisk/ramdisk.cpio.gz.uboot
251 20:09:56.749302 - setenv initrd_size ${filesize}
252 20:09:56.749445 - tftp 0x81f00000 3866970/tftp-deploy-ek4rcx2f/dtb/omap3-beagle-xm.dtb
253 20:09:56.749594 - setenv bootargs 'console=ttyO2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp'
254 20:09:56.749743 - bootz 0x81000000 0x82000000 0x81f00000
255 20:09:56.749953 end: 2.2 bootloader-overlay (duration 00:00:00) [common]
257 20:09:56.750492 start: 2.3 connect-device (timeout 00:05:00) [common]
258 20:09:56.750655 [common] connect-device Connecting to device using 'labgrid-client -x ws://nuc-1:20408/ws -p omap3-beagle-xm console --loop'
259 20:09:56.757346 Setting prompt string to ['lava-test: # ']
260 20:09:56.757979 end: 2.3 connect-device (duration 00:00:00) [common]
261 20:09:56.758221 start: 2.4 uboot-commands (timeout 00:05:00) [common]
262 20:09:56.758429 start: 2.4.1 reset-device (timeout 00:05:00) [common]
263 20:09:56.758625 start: 2.4.1.1 pdu-reboot (timeout 00:05:00) [common]
264 20:09:56.759009 Calling: ['labgrid-client', '-x', 'ws://nuc-1:20408/ws', '-p', 'omap3-beagle-xm', 'power', 'cycle']
265 20:10:05.100626 Returned 0 in 8 seconds
266 20:10:05.100916 end: 2.4.1.1 pdu-reboot (duration 00:00:08) [common]
268 20:10:05.101316 end: 2.4.1 reset-device (duration 00:00:08) [common]
269 20:10:05.101483 start: 2.4.2 bootloader-interrupt (timeout 00:04:52) [common]
270 20:10:05.101621 Setting prompt string to ['Hit any key to stop autoboot']
271 20:10:05.101755 bootloader-interrupt: Wait for prompt ['Hit any key to stop autoboot'] (timeout 00:05:00)
272 20:10:05.102239 connecting to NetworkSerialPort(target=Target(name='omap3-beagle-xm', env=None), name='default', state=<BindingState.bound: 1>, avail=True, host='nuc-1', port=52751, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t nuc-1:52751
273 20:10:05.102371 connected to 192.168.0.1 (port 52751)
274 20:10:05.102497 Escape character: Ctrl-\
275 20:10:05.102619 Type the escape character to get to the prompt.
276 20:10:05.473001
277 20:10:05.481477 U-Boot SPL 2018.09-rc2-00001-ge6aa9785acb2 (Aug 15 2018 - 09:41:52 -0700)
278 20:10:05.481934 Trying to boot from MMC1
279 20:10:05.671715 spl_load_image_fat_os: error reading image args, err - -2
280 20:10:05.914038
281 20:10:05.914567
282 20:10:05.919604 U-Boot 2018.09-rc2-00001-ge6aa9785acb2 (Aug 15 2018 - 09:41:52 -0700)
283 20:10:05.920176
284 20:10:05.925013 OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-200MHz, Max CPU Clock 1 GHz
285 20:10:05.925582 Model: TI OMAP3 BeagleBoard
286 20:10:05.928704 OMAP3 Beagle board + LPDDR/NAND
287 20:10:05.983679 I2C: ready
288 20:10:05.983885 DRAM: 256 MiB
289 20:10:06.052098 NAND: 0 MiB
290 20:10:06.067741 MMC: OMAP SD/MMC: 0
291 20:10:06.074958 Loading Environment from NAND... *** Warning - readenv() failed, using default environment
292 20:10:06.075559
293 20:10:06.137019 Beagle xM Rev C
294 20:10:06.145482 No EEPROM on expansion board
295 20:10:06.146148 No EEPROM on expansion board
296 20:10:06.153853 OMAP die ID: 0b5000029ff80000016842c910019004
297 20:10:06.160604 Net: usb_ether
298 20:10:06.161314 starting USB...
299 20:10:06.169078 USB0: USB EHCI 1.00
300 20:10:07.504589 scanning bus 0 for devices... 3 USB Device(s) found
301 20:10:07.510246 scanning usb for storage devices... 0 Storage Device(s) found
302 20:10:07.516474 scanning usb for ethernet devices... 1 Ethernet Device(s) found
303 20:10:07.526552 Sending line: ''
305 20:10:07.578484 end: 2.4.2 bootloader-interrupt (duration 00:00:02) [common]
306 20:10:07.579114 start: 2.4.3 bootloader-commands (timeout 00:04:49) [common]
307 20:10:07.579539 Setting prompt string to ['BeagleBoard']
308 20:10:07.579902 bootloader-commands: Wait for prompt ['BeagleBoard'] (timeout 00:04:49)
309 20:10:07.588072 Hit any key to stop autoboot: 2 0
310 20:10:07.589138 Setting prompt string to ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN']
311 20:10:07.589625 Sending line: 'setenv usbethaddr 00:40:5c:26:0a:6c; usb start'
313 20:10:07.691162 bootloader-commands: Wait for prompt ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:49)
314 20:10:07.697327 BeagleBoard # setenv usbethaddr 00:40:5c:26:0a:6c; usb start
315 20:10:07.698241 Sending line: 'setenv autoload no'
317 20:10:07.800323 bootloader-commands: Wait for prompt ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:49)
318 20:10:07.806805 BeagleBoard # setenv autoload no
319 20:10:07.807728 Sending line: 'dhcp'
321 20:10:07.909249 bootloader-commands: Wait for prompt ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:49)
322 20:10:07.917604 BeagleBoard # dhcp
323 20:10:10.173338 Need valid 'usbnet_devaddr' to be setWaiting for Ethernet connection... done.
324 20:10:10.173935 BOOTP broadcast 1
325 20:10:10.425618 BOOTP broadcast 2
326 20:10:10.435336 DHCP client bound to address 192.168.0.198 (261 ms)
327 20:10:10.436315 Sending line: 'setenv serverip 192.168.0.2'
329 20:10:10.538250 bootloader-commands: Wait for prompt ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:46)
330 20:10:10.544841 BeagleBoard # setenv serverip 192.168.0.2
331 20:10:10.545596 Sending line: 'tftp 0x81000000 3866970/tftp-deploy-ek4rcx2f/kernel/zImage'
333 20:10:10.647367 bootloader-commands: Wait for prompt ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:46)
334 20:10:10.651869 BeagleBoard # tftp 0x81000000 3866970/tftp-deploy-ek4rcx2f/kernel/zImage
335 20:10:12.201670 Waiting for Ethernet connection... done.
336 20:10:12.202590 Using sms0 device
337 20:10:12.206736 TFTP from server 192.168.0.2; our IP address is 192.168.0.198
338 20:10:12.214417 Filename '3866970/tftp-deploy-ek4rcx2f/kernel/zImage'.
339 20:10:12.215077 Load address: 0x81000000
340 20:10:22.701595 Loading: *T #################################################################
341 20:10:23.154666 #################################################################
342 20:10:23.610074 #################################################################
343 20:10:24.048895 #################################################################
344 20:10:24.530760 #################################################################
345 20:10:25.013040 #################################################################
346 20:10:25.502169 #################################################################
347 20:10:26.006099 #################################################################
348 20:10:26.491580 #################################################################
349 20:10:26.962320 #################################################################
350 20:10:27.442372 #################################################################
351 20:10:27.492444 #######
352 20:10:27.492991 676.8 KiB/s
353 20:10:27.493448 done
354 20:10:27.496864 Bytes transferred = 10592768 (a1a200 hex)
355 20:10:27.497764 Sending line: 'tftp 0x82000000 3866970/tftp-deploy-ek4rcx2f/ramdisk/ramdisk.cpio.gz.uboot'
357 20:10:27.599812 bootloader-commands: Wait for prompt ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:29)
358 20:10:27.604855 BeagleBoard # tftp 0x82000000 3866970/tftp-deploy-ek4rcx2f/ramdisk/ramdisk.cpio.gz.uboot
359 20:10:29.153830 Waiting for Ethernet connection... done.
360 20:10:29.154025 Using sms0 device
361 20:10:29.159442 TFTP from server 192.168.0.2; our IP address is 192.168.0.198
362 20:10:29.164622 Filename '3866970/tftp-deploy-ek4rcx2f/ramdisk/ramdisk.cpio.gz.uboot'.
363 20:10:29.164787 Load address: 0x82000000
364 20:10:34.541065 Loading: *#################################################################
365 20:10:34.936205 #################################################################
366 20:10:35.470487 #################################################################
367 20:10:36.086645 #################################################################
368 20:10:36.691112 #################################################################
369 20:10:37.305604 #################################################################
370 20:10:37.882280 #################################################################
371 20:10:38.463292 #################################################################
372 20:10:38.968701 #################################################################
373 20:10:39.331597 #################################################################
374 20:10:39.744773 #################################################################
375 20:10:40.187926 #################################################################
376 20:10:40.655550 #################################################################
377 20:10:41.266360 #################################################################
378 20:10:41.645665 #################################################################
379 20:10:42.001720 #################################################################
380 20:10:42.452658 #################################################################
381 20:10:42.924709 #################################################################
382 20:10:43.129179 #####################
383 20:10:43.129737 1.2 MiB/s
384 20:10:43.130228 done
385 20:10:43.133872 Bytes transferred = 17472234 (10a9aea hex)
386 20:10:43.134881 Sending line: 'setenv initrd_size ${filesize}'
388 20:10:43.236814 bootloader-commands: Wait for prompt ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:14)
389 20:10:43.243498 BeagleBoard # setenv initrd_size ${filesize}
390 20:10:43.244410 Sending line: 'tftp 0x81f00000 3866970/tftp-deploy-ek4rcx2f/dtb/omap3-beagle-xm.dtb'
392 20:10:43.346413 bootloader-commands: Wait for prompt ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:13)
393 20:10:43.351899 BeagleBoard # tftp 0x81f00000 3866970/tftp-deploy-ek4rcx2f/dtb/omap3-beagle-xm.dtb
394 20:10:44.900420 Waiting for Ethernet connection... done.
395 20:10:44.900683 Using sms0 device
396 20:10:44.906050 TFTP from server 192.168.0.2; our IP address is 192.168.0.198
397 20:10:44.911256 Filename '3866970/tftp-deploy-ek4rcx2f/dtb/omap3-beagle-xm.dtb'.
398 20:10:44.911462 Load address: 0x81f00000
399 20:10:49.967657 Loading: *#####
400 20:10:49.968194 12.7 KiB/s
401 20:10:49.968657 done
402 20:10:49.969003 Bytes transferred = 70089 (111c9 hex)
403 20:10:49.971483 Sending line: "setenv bootargs 'console=ttyO2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp'"
405 20:10:50.073696 bootloader-commands: Wait for prompt ['BeagleBoard', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:07)
406 20:10:50.080019 BeagleBoard # setenv bootargs 'console=ttyO2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp'
407 20:10:50.081078 Sending line: 'bootz 0x81000000 0x82000000 0x81f00000'
409 20:10:50.182817 Setting prompt string to ['Starting kernel', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN']
410 20:10:50.183469 bootloader-commands: Wait for prompt ['Starting kernel', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:04:07)
411 20:10:50.190587 BeagleBoard # bootz 0x81000000 0x82000000 0x81f00000
412 20:10:50.191304 ## Loading init Ramdisk from Legacy Image at 82000000 ...
413 20:10:50.196127 Image Name:
414 20:10:50.201674 Image Type: ARM Linux RAMDisk Image (uncompressed)
415 20:10:50.202263 Data Size: 17472170 Bytes = 16.7 MiB
416 20:10:50.207148 Load Address: 00000000
417 20:10:50.207795 Entry Point: 00000000
418 20:10:50.427723 Verifying Checksum ... OK
419 20:10:50.428306 ## Flattened Device Tree blob at 81f00000
420 20:10:50.433479 Booting using the fdt blob at 0x81f00000
421 20:10:50.574005 Loading Ramdisk to 88f56000, end 89fffaaa ... OK
422 20:10:50.574324 Loading Device Tree to 88f41000, end 88f551c8 ... OK
423 20:10:50.582355
424 20:10:50.582586 Starting kernel ...
425 20:10:50.582729
426 20:10:50.583142 end: 2.4.3 bootloader-commands (duration 00:00:43) [common]
427 20:10:50.583347 start: 2.4.4 auto-login-action (timeout 00:04:06) [common]
428 20:10:50.583502 Setting prompt string to ['Linux version [0-9]']
429 20:10:50.583649 Setting prompt string to ['Linux version [0-9]', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN']
430 20:10:50.583807 auto-login-action: Wait for prompt ['Linux version [0-9]', 'Resetting CPU', 'Must RESET board to recover', 'TIMEOUT', 'Retry count exceeded', 'Retry time exceeded; starting again', 'ERROR: The remote end did not respond in time.', 'Waiting for Ethernet connection... unable to connect.', 'File not found', 'Bad Linux ARM64 Image magic!', 'Wrong Ramdisk Image Format', 'Ramdisk image is corrupt or invalid', 'ERROR: Failed to allocate', 'TFTP error: trying to overwrite reserved memory', 'Bad Linux RISCV Image magic!', 'Wrong Image Format for boot', 'ERROR: Did not find a cmdline Flattened Device Tree', 'ERROR: RD image overlaps OS image', 'Verifying Checksum ... Bad Data CRC', 'ERROR: RD image overlaps OS image', 'Image too large: increase CONFIG_SYS_BOOTM_LEN'] (timeout 00:05:00)
431 20:10:53.004993 <6>[ 0.000000] Booting Linux on physical CPU 0x0
432 20:10:53.011073 start: 2.4.4.1 login-action (timeout 00:04:04) [common]
433 20:10:53.011778 The string '/ #' does not look like a typical prompt and could match status messages instead. Please check the job log files and use a prompt string which matches the actual prompt string more closely.
434 20:10:53.012269 Setting prompt string to []
435 20:10:53.012837 Setting prompt string to ['-\\[ cut here \\]', 'Unhandled fault', 'BUG: KCSAN:', 'BUG: KASAN:', 'BUG: KFENCE:', 'Oops(?: -|:)', 'WARNING:', '(kernel BUG at|BUG:)', 'invalid opcode:', 'Kernel panic - not syncing']
436 20:10:53.013280 Using line separator: #'\n'#
437 20:10:53.013617 No login prompt set.
438 20:10:53.013975 Parsing kernel messages
439 20:10:53.014290 ['-\\[ cut here \\]', 'Unhandled fault', 'BUG: KCSAN:', 'BUG: KASAN:', 'BUG: KFENCE:', 'Oops(?: -|:)', 'WARNING:', '(kernel BUG at|BUG:)', 'invalid opcode:', 'Kernel panic - not syncing', '/ #', 'Login timed out', 'Login incorrect']
440 20:10:53.014862 [login-action] Waiting for messages, (timeout 00:04:04)
441 20:10:53.015369 Waiting using forced prompt support (timeout 00:02:02)
442 20:10:53.026915 <5>[ 0.000000] Linux version 6.10.0-rc5 (KernelCI@build-j247096-arm-gcc-10-multi-v7-defconfig-config-thumb2-kw2qs) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Jun 27 19:53:23 UTC 2024
443 20:10:53.037886 <6>[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
444 20:10:53.043988 <6>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
445 20:10:53.049434 <6>[ 0.000000] OF: fdt: Machine model: TI OMAP3 BeagleBoard xM
446 20:10:53.055173 <4>[ 0.000000] Malformed early option 'earlycon'
447 20:10:53.060612 <6>[ 0.000000] Memory policy: Data cache writeback
448 20:10:53.061227 <6>[ 0.000000] efi: UEFI not found.
449 20:10:53.066396 <6>[ 0.000000] cma: Reserved 64 MiB at 0x8b800000 on node -1
450 20:10:53.072176 <6>[ 0.000000] Zone ranges:
451 20:10:53.077668 <6>[ 0.000000] DMA [mem 0x0000000080000000-0x000000008fdfffff]
452 20:10:53.082941 <6>[ 0.000000] Normal empty
453 20:10:53.083544 <6>[ 0.000000] HighMem empty
454 20:10:53.088573 <6>[ 0.000000] Movable zone start for each node
455 20:10:53.094228 <6>[ 0.000000] Early memory node ranges
456 20:10:53.099922 <6>[ 0.000000] node 0: [mem 0x0000000080000000-0x000000008fdfffff]
457 20:10:53.105835 <6>[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000008fdfffff]
458 20:10:53.111221 <6>[ 0.000000] CPU: All CPU(s) started in SVC mode.
459 20:10:53.117096 <6>[ 0.000000] OMAP3630/DM3730 ES1.2 (l2cache iva sgx neon isp 192mhz_clk)
460 20:10:53.122329 <6>[ 0.000000] percpu: Embedded 17 pages/cpu s40404 r8192 d21036 u69632
461 20:10:53.139042 <5>[ 0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp
462 20:10:53.145002 <6>[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
463 20:10:53.156068 <6>[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
464 20:10:53.161961 <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024
465 20:10:53.167088 <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
466 20:10:53.183774 <6>[ 0.000000] Memory: 151252K/260096K available (11264K kernel code, 2535K rwdata, 6708K rodata, 2048K init, 427K bss, 43308K reserved, 65536K cma-reserved, 0K highmem)
467 20:10:53.189038 <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
468 20:10:53.194545 <6>[ 0.000000] trace event string verifier disabled
469 20:10:53.200031 <6>[ 0.000000] rcu: Hierarchical RCU implementation.
470 20:10:53.206207 <6>[ 0.000000] rcu: RCU event tracing is enabled.
471 20:10:53.211790 <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1.
472 20:10:53.217209 <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
473 20:10:53.222905 <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
474 20:10:53.234220 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
475 20:10:53.239823 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 4.0) with 96 interrupts
476 20:10:53.245724 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
477 20:10:53.251519 <6>[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
478 20:10:53.257186 <6>[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
479 20:10:53.268150 <6>[ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
480 20:10:53.278987 <6>[ 0.000000] sched_clock: 32 bits at 33kHz, resolution 30517ns, wraps every 65535999984741ns
481 20:10:53.284700 <6>[ 0.005279] TI gptimer clockevent: always-on 32768 Hz at /ocp@68000000/target-module@48318000
482 20:10:53.290356 <6>[ 0.008697] Console: colour dummy device 80x30
483 20:10:53.291459 Matched prompt #6: WARNING:
484 20:10:53.291911 Setting prompt string to ['end trace[^\\r]*\\r', '/ #', 'Login timed out', 'Login incorrect']
485 20:10:53.295939 <3>[ 0.008758] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2'
486 20:10:53.301906 <3>[ 0.008758] This ensures that you still see kernel messages. Please
487 20:10:53.307265 <3>[ 0.008789] update your kernel commandline.
488 20:10:53.312848 <6>[ 0.008819] Calibrating delay loop... 600.47 BogoMIPS (lpj=3002368)
489 20:10:53.318358 <6>[ 0.055694] CPU: Testing write buffer coherency: ok
490 20:10:53.324766 <6>[ 0.055755] CPU0: Spectre v2: using BPIALL workaround
491 20:10:53.329853 <6>[ 0.055786] pid_max: default: 32768 minimum: 301
492 20:10:53.335511 <6>[ 0.055969] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
493 20:10:53.346575 <6>[ 0.055999] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
494 20:10:53.352094 <6>[ 0.057159] CPU0: thread -1, cpu 0, socket -1, mpidr 0
495 20:10:53.357972 <6>[ 0.058746] Setting up static identity map for 0x80300000 - 0x803000a0
496 20:10:53.363331 <6>[ 0.063476] rcu: Hierarchical SRCU implementation.
497 20:10:53.368696 <6>[ 0.063476] rcu: Max phase no-delay instances is 1000.
498 20:10:53.374368 <6>[ 0.074798] EFI services will not be available.
499 20:10:53.380235 <6>[ 0.075164] smp: Bringing up secondary CPUs ...
500 20:10:53.381083 <6>[ 0.075195] smp: Brought up 1 node, 1 CPU
501 20:10:53.391275 <6>[ 0.075225] SMP: Total of 1 processors activated (600.47 BogoMIPS).
502 20:10:53.397107 <6>[ 0.075225] CPU: All CPU(s) started in SVC mode.
503 20:10:53.397704 <6>[ 0.076263] devtmpfs: initialized
504 20:10:53.408244 <6>[ 0.102569] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
505 20:10:53.413440 <6>[ 0.102966] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
506 20:10:53.424774 <6>[ 0.102996] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
507 20:10:53.430831 <6>[ 0.108215] pinctrl core: initialized pinctrl subsystem
508 20:10:53.431430 <6>[ 0.116973] DMI not present or invalid.
509 20:10:53.436012 <6>[ 0.118682] NET: Registered PF_NETLINK/PF_ROUTE protocol family
510 20:10:53.447311 <6>[ 0.122070] DMA: preallocated 256 KiB pool for atomic coherent allocations
511 20:10:53.453078 <4>[ 0.152557] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
512 20:10:53.458399 <4>[ 0.153472] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
513 20:10:53.464289 <6>[ 0.242156] thermal_sys: Registered thermal governor 'step_wise'
514 20:10:53.469749 <6>[ 0.242309] cpuidle: using governor menu
515 20:10:53.475612 <6>[ 0.242950] Reprogramming SDRC clock to 400000000 Hz
516 20:10:53.486314 <6>[ 0.272186] platform 68000000.ocp: Fixed dependency cycle(s) with /ocp@68000000/interrupt-controller@48200000
517 20:10:53.491648 <6>[ 0.289459] OMAP GPIO hardware version 2.5
518 20:10:53.497413 <6>[ 0.328826] platform 48050000.dss: Fixed dependency cycle(s) with /encoder0
519 20:10:53.503109 <6>[ 0.329010] platform encoder0: Fixed dependency cycle(s) with /ocp@68000000/dss@48050000
520 20:10:53.514002 <6>[ 0.329772] platform encoder0: Fixed dependency cycle(s) with /connector0
521 20:10:53.519485 <6>[ 0.329925] platform connector0: Fixed dependency cycle(s) with /encoder0
522 20:10:53.531014 <6>[ 0.330657] platform connector1: Fixed dependency cycle(s) with /ocp@68000000/dss@48050000/encoder@48050c00
523 20:10:53.536148 <6>[ 0.331787] amba 5401b000.etb: Fixed dependency cycle(s) with /etm@54010000
524 20:10:53.542056 <6>[ 0.331939] amba 54010000.etm: Fixed dependency cycle(s) with /etb@5401b000
525 20:10:53.547577 <6>[ 0.332214] No ATAGs?
526 20:10:53.552993 <6>[ 0.332244] hw-breakpoint: debug architecture 0x4 unsupported.
527 20:10:53.559182 <6>[ 0.348449] Serial: AMBA PL011 UART driver
528 20:10:53.564371 <6>[ 0.382934] iommu: Default domain type: Translated
529 20:10:53.570508 <6>[ 0.382965] iommu: DMA domain TLB invalidation policy: strict mode
530 20:10:53.575481 <6>[ 0.384857] omap-iommu 480bd400.mmu: 480bd400.mmu registered
531 20:10:53.581148 <5>[ 0.399139] SCSI subsystem initialized
532 20:10:53.587171 <6>[ 0.407836] usbcore: registered new interface driver usbfs
533 20:10:53.592802 <6>[ 0.407928] usbcore: registered new interface driver hub
534 20:10:53.598410 <6>[ 0.407989] usbcore: registered new device driver usb
535 20:10:53.604249 <6>[ 0.411773] omap_i2c 48070000.i2c: bus 0 rev4.4 at 2600 kHz
536 20:10:53.609578 <6>[ 0.417968] omap_i2c 48072000.i2c: bus 1 rev4.4 at 400 kHz
537 20:10:53.615158 <6>[ 0.418945] omap_i2c 48060000.i2c: bus 2 rev4.4 at 100 kHz
538 20:10:53.620992 <6>[ 0.420593] pps_core: LinuxPPS API ver. 1 registered
539 20:10:53.626639 <6>[ 0.420593] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
540 20:10:53.632123 <6>[ 0.420654] PTP clock support registered
541 20:10:53.637777 <6>[ 0.421051] EDAC MC: Ver: 3.0.0
542 20:10:53.643611 <6>[ 0.428466] scmi_core: SCMI protocol bus registered
543 20:10:53.644083 <6>[ 0.439727] vgaarb: loaded
544 20:10:53.649322 <6>[ 0.447784] clocksource: Switched to clocksource 32k_counter
545 20:10:53.654836 <6>[ 0.475372] NET: Registered PF_INET protocol family
546 20:10:53.660562 <6>[ 0.475738] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
547 20:10:53.671773 <6>[ 0.476837] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
548 20:10:53.677321 <6>[ 0.476898] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
549 20:10:53.688616 <6>[ 0.476898] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
550 20:10:53.693808 <6>[ 0.477020] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
551 20:10:53.699631 <6>[ 0.477142] TCP: Hash tables configured (established 2048 bind 2048)
552 20:10:53.711081 <6>[ 0.477294] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
553 20:10:53.716341 <6>[ 0.477325] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
554 20:10:53.722027 <6>[ 0.477508] NET: Registered PF_UNIX/PF_LOCAL protocol family
555 20:10:53.727647 <6>[ 0.491668] RPC: Registered named UNIX socket transport module.
556 20:10:53.733150 <6>[ 0.491668] RPC: Registered udp transport module.
557 20:10:53.739041 <6>[ 0.491699] RPC: Registered tcp transport module.
558 20:10:53.744707 <6>[ 0.491699] RPC: Registered tcp-with-tls transport module.
559 20:10:53.749873 <6>[ 0.491699] RPC: Registered tcp NFSv4.1 backchannel transport module.
560 20:10:53.755632 <6>[ 0.491729] PCI: CLS 0 bytes, default 64
561 20:10:53.761362 <6>[ 0.497528] Trying to unpack rootfs image as initramfs...
562 20:10:53.767164 <6>[ 0.510803] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
563 20:10:53.772740 <5>[ 0.513427] Initialise system trusted keyrings
564 20:10:53.778100 <6>[ 0.531127] workingset: timestamp_bits=30 max_order=16 bucket_order=0
565 20:10:53.783739 <6>[ 0.531768] squashfs: version 4.0 (2009/01/31) Phillip Lougher
566 20:10:53.789169 <5>[ 0.547515] NFS: Registering the id_resolver key type
567 20:10:53.794642 <5>[ 0.547607] Key type id_resolver registered
568 20:10:53.800682 <5>[ 0.547607] Key type id_legacy registered
569 20:10:53.805942 <6>[ 0.547668] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
570 20:10:53.817059 <6>[ 0.547668] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
571 20:10:53.817599 <5>[ 0.548278] Key type asymmetric registered
572 20:10:53.822526 <5>[ 0.548309] Asymmetric key parser 'x509' registered
573 20:10:53.833802 <6>[ 0.548431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
574 20:10:53.839681 <6>[ 0.548431] io scheduler mq-deadline registered
575 20:10:53.840264 <6>[ 0.548461] io scheduler kyber registered
576 20:10:53.844828 <6>[ 0.548492] io scheduler bfq registered
577 20:10:53.850342 <6>[ 0.573608] pinctrl-single 48002030.pinmux: 284 pins, size 568
578 20:10:53.855928 <6>[ 0.574249] pinctrl-single 48002a00.pinmux: 46 pins, size 92
579 20:10:53.861748 <6>[ 0.575103] pinctrl-single 480025a0.pinmux: 46 pins, size 92
580 20:10:53.867173 <6>[ 1.046325] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
581 20:10:53.878467 <6>[ 1.084533] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 88, base_baud = 3000000) is a 8250
582 20:10:53.889410 <6>[ 1.093414] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 89, base_baud = 3000000) is a 8250
583 20:10:53.895330 <6>[ 1.101623] 49020000.serial: ttyS2 at MMIO 0x49020000 (irq = 90, base_baud = 3000000) is a 8250
584 20:10:53.902261 <6>[ 1.101715] printk: legacy console [ttyS2] enabled
585 20:10:54.244235 <6>[ 2.334808] 49042000.serial: ttyS3 at MMIO 0x49042000 (irq = 96, base_baud = 3000000) is a 8250
586 20:10:54.268458 <6>[ 2.364532] msm_serial: driver initialized
587 20:10:54.275421 <6>[ 2.369812] SuperH (H)SCI(F) driver initialized
588 20:10:54.280694 <6>[ 2.375518] STMicroelectronics ASC driver initialized
589 20:10:54.286006 <6>[ 2.381256] STM32 USART driver initialized
590 20:10:54.406088 <6>[ 2.502441] brd: module loaded
591 20:10:54.450197 <6>[ 2.546295] loop: module loaded
592 20:10:54.535250 <6>[ 2.626525] twl 0-0048: PIH (irq 23) chaining IRQs 145..153
593 20:10:54.539134 <6>[ 2.632629] twl 0-0048: power (irq 150) chaining IRQs 153..160
594 20:10:54.659124 <6>[ 2.751495] twl4030_gpio twl4030-gpio: gpio (irq 145) chaining IRQs 161..178
595 20:10:55.010366 <6>[ 3.105468] CAN device driver interface
596 20:10:55.019243 <6>[ 3.113098] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
597 20:10:55.025450 <6>[ 3.122802] e1000e: Intel(R) PRO/1000 Network Driver
598 20:10:55.037209 <6>[ 3.128082] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
599 20:10:55.042665 <6>[ 3.134490] igb: Intel(R) Gigabit Ethernet Network Driver
600 20:10:55.046218 <6>[ 3.140197] igb: Copyright (c) 2007-2014 Intel Corporation.
601 20:10:55.068473 <6>[ 3.159912] pegasus: Pegasus/Pegasus II USB Ethernet driver
602 20:10:55.074373 <6>[ 3.165954] usbcore: registered new interface driver pegasus
603 20:10:55.079800 <6>[ 3.171997] usbcore: registered new interface driver asix
604 20:10:55.085554 <6>[ 3.177764] usbcore: registered new interface driver ax88179_178a
605 20:10:55.091215 <6>[ 3.184234] usbcore: registered new interface driver cdc_ether
606 20:10:55.096798 <6>[ 3.190429] usbcore: registered new interface driver smsc75xx
607 20:10:55.102766 <6>[ 3.196533] usbcore: registered new interface driver smsc95xx
608 20:10:55.108106 <6>[ 3.202667] usbcore: registered new interface driver net1080
609 20:10:55.114370 <6>[ 3.208679] usbcore: registered new interface driver cdc_subset
610 20:10:55.119857 <6>[ 3.214965] usbcore: registered new interface driver zaurus
611 20:10:55.127018 <6>[ 3.220977] usbcore: registered new interface driver cdc_ncm
612 20:10:55.147337 <6>[ 3.240814] usbcore: registered new interface driver usb-storage
613 20:10:55.219690 <4>[ 3.312713] twl_rtc 48070000.i2c:twl@48:rtc: Power up reset detected.
614 20:10:55.239935 <6>[ 3.331634] ohci-platform 48064400.ohci: Generic Platform OHCI controller
615 20:10:55.247497 <6>[ 3.338806] ohci-platform 48064400.ohci: new USB bus registered, assigned bus number 1
616 20:10:55.260989 <6>[ 3.354034] twl_rtc 48070000.i2c:twl@48:rtc: registered as rtc0
617 20:10:55.278266 <6>[ 3.371459] ohci-platform 48064400.ohci: irq 92, io mem 0x48064400
618 20:10:55.304243 <6>[ 3.394256] twl_rtc 48070000.i2c:twl@48:rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800)
619 20:10:55.344252 <6>[ 3.439208] i2c_dev: i2c /dev entries driver
620 20:10:55.413811 <3>[ 3.505218] ti_opp_supply opp-supply: probe with driver ti_opp_supply failed with error 1
621 20:10:55.436942 <6>[ 3.525115] sdhci: Secure Digital Host Controller Interface driver
622 20:10:55.437469 <6>[ 3.531738] sdhci: Copyright(c) Pierre Ossman
623 20:10:55.449927 <6>[ 3.542724] Synopsys Designware Multimedia Card Interface Driver
624 20:10:55.461599 <6>[ 3.554321] sdhci-pltfm: SDHCI platform and OF driver helper
625 20:10:55.495126 <3>[ 3.588439] omap_hsmmc 4809c000.mmc: RX DMA channel request failed
626 20:10:55.507390 <6>[ 3.602813] hub 1-0:1.0: USB hub found
627 20:10:55.535533 <6>[ 3.630798] hub 1-0:1.0: 3 ports detected
628 20:10:55.944549 <6>[ 4.036102] rootfs image is not initramfs (uncompression error); looks like an initrd
629 20:10:56.094973 <6>[ 4.190246] Freeing initrd memory: 17064K
630 20:10:56.151727 <6>[ 4.244659] ledtrig-cpu: registered to indicate activity on CPUs
631 20:10:56.167801 <6>[ 4.256958] usbcore: registered new interface driver usbhid
632 20:10:56.168442 <6>[ 4.262939] usbhid: USB HID core driver
633 20:10:56.174883 <6>[ 4.268981] omap-mailbox 48094000.mailbox: omap mailbox rev 0x40
634 20:10:56.183132 <6>[ 4.280181] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
635 20:10:56.192856 <4>[ 4.285705] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
636 20:10:56.226728 <6>[ 4.321075] NET: Registered PF_INET6 protocol family
637 20:10:56.260312 <6>[ 4.356842] Segment Routing with IPv6
638 20:10:56.265350 <6>[ 4.360931] In-situ OAM (IOAM) with IPv6
639 20:10:56.271909 <6>[ 4.365203] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
640 20:10:56.277550 <6>[ 4.372161] NET: Registered PF_PACKET protocol family
641 20:10:56.283392 <6>[ 4.377502] can: controller area network core
642 20:10:56.288819 <6>[ 4.382263] NET: Registered PF_CAN protocol family
643 20:10:56.289433 <6>[ 4.387359] can: raw protocol
644 20:10:56.294750 <6>[ 4.390624] can: broadcast manager protocol
645 20:10:56.300934 <6>[ 4.395111] can: netlink gateway - max_hops=1
646 20:10:56.306829 <5>[ 4.400573] Key type dns_resolver registered
647 20:10:56.312954 <6>[ 4.405364] ThumbEE CPU extension supported.
648 20:10:56.313557 <5>[ 4.409942] Registering SWP/SWPB emulation handler
649 20:10:56.318558 <3>[ 4.415588] pm: Failed to request pm_wkup irq
650 20:10:56.326688 <4>[ 4.420227] omap2_common_pm_late_init: pm soc init failed: -22
651 20:10:56.381072 <5>[ 4.475708] Loading compiled-in X.509 certificates
652 20:10:56.387470 <4>[ 4.484710] ------------[ cut here ]------------
653 20:10:56.398579 <4>[ 4.489624] WARNING: CPU: 0 PID: 1 at fs/kernfs/dir.c:782 kernfs_add_one+0xf5/0xf8
654 20:10:56.404243 <4>[ 4.497589] kernfs: ns invalid in 'sighand_cache' for 'slab_size'
655 20:10:56.410375 <4>[ 4.503997] Modules linked in:
656 20:10:56.416567 <4>[ 4.507324] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc5 #1
657 20:10:56.421349 <4>[ 4.513885] Hardware name: Generic OMAP36xx (Flattened Device Tree)
658 20:10:56.421943 <4>[ 4.520446] Call trace:
659 20:10:56.427315 <4>[ 4.520446] unwind_backtrace from show_stack+0xb/0xc
660 20:10:56.432878 <4>[ 4.528625] show_stack from dump_stack_lvl+0x35/0x40
661 20:10:56.438284 <4>[ 4.533966] dump_stack_lvl from __warn+0xd7/0xe4
662 20:10:56.443999 <4>[ 4.539001] __warn from warn_slowpath_fmt+0xbb/0xf8
663 20:10:56.449661 <4>[ 4.544250] warn_slowpath_fmt from kernfs_add_one+0xf5/0xf8
664 20:10:56.455057 <4>[ 4.550201] kernfs_add_one from __kernfs_create_file+0x5f/0x78
665 20:10:56.460516 <4>[ 4.556427] __kernfs_create_file from sysfs_add_file_mode_ns+0x57/0xd0
666 20:10:56.472152 <4>[ 4.563354] sysfs_add_file_mode_ns from internal_create_group+0x119/0x2bc
667 20:10:56.477241 <4>[ 4.570526] internal_create_group from sysfs_slab_add+0x10f/0x170
668 20:10:56.483037 <4>[ 4.577026] sysfs_slab_add from slab_sysfs_init+0x7f/0xc8
669 20:10:56.488733 <4>[ 4.582824] slab_sysfs_init from do_one_initcall+0x31/0x14c
670 20:10:56.494347 <4>[ 4.588775] do_one_initcall from kernel_init_freeable+0x163/0x1b0
671 20:10:56.499862 <4>[ 4.595275] kernel_init_freeable from kernel_init+0x1b/0xf0
672 20:10:56.505231 <4>[ 4.601226] kernel_init from ret_from_fork+0x11/0x1c
673 20:10:56.510971 <4>[ 4.606567] Exception stack(0xd0009fb0 to 0xd0009ff8)
674 20:10:56.522243 <4>[ 4.611907] 9fa0: 00000000 00000000 00000000 00000000
675 20:10:56.527723 <4>[ 4.620391] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
676 20:10:56.533781 <4>[ 4.628875] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
677 20:10:56.539157 <4>[ 4.635833] ---[ end trace 0000000000000000 ]---
678 20:10:56.540201 Setting prompt string to ['-\\[ cut here \\]', 'Unhandled fault', 'BUG: KCSAN:', 'BUG: KASAN:', 'BUG: KFENCE:', 'Oops(?: -|:)', 'WARNING:', '(kernel BUG at|BUG:)', 'invalid opcode:', 'Kernel panic - not syncing', '/ #', 'Login timed out', 'Login incorrect']
679 20:10:56.540684 login-action: kernel 'warning'
680 20:10:56.541083 [login-action] Waiting for messages, (timeout 00:04:00)
681 20:10:56.541457 Waiting using forced prompt support (timeout 00:02:00)
682 20:10:56.547622 <3>[ 4.640777] SLUB: Unable to add boot slab sighand_cache to sysfs
683 20:10:56.781240 <6>[ 4.870971] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported)
684 20:10:56.791136 <6>[ 4.884948] hsusb2_power_reg enforce active low on GPIO handle
685 20:10:56.834889 <6>[ 4.925415] omap_rng 480a0000.rng: Random Number Generator ver. 70
686 20:10:56.841799 <3>[ 4.932952] ti-sysc 48318000.target-module: probe with driver ti-sysc failed with error -16
687 20:10:56.934788 <4>[ 5.024597] usb_phy_generic hsusb2-phy-pins: dummy supplies not allowed for exclusive requests (id=vbus)
688 20:10:57.099613 <6>[ 5.191070] ehci-omap 48064800.ehci: EHCI Host Controller
689 20:10:57.105087 <6>[ 5.196929] ehci-omap 48064800.ehci: new USB bus registered, assigned bus number 2
690 20:10:57.117963 <6>[ 5.211486] ehci-omap 48064800.ehci: irq 93, io mem 0x48064800
691 20:10:57.150809 <6>[ 5.240509] ehci-omap 48064800.ehci: USB 2.0 started, EHCI 1.00
692 20:10:57.151413 <6>[ 5.248046] hub 2-0:1.0: USB hub found
693 20:10:57.157234 <6>[ 5.252685] hub 2-0:1.0: 3 ports detected
694 20:10:57.175873 <6>[ 5.268310] input: gpio_keys as /devices/platform/gpio_keys/input/input0
695 20:10:57.362821 <4>[ 5.453674] mmc0: host does not support reading read-only switch, assuming write-enable
696 20:10:57.382393 <6>[ 5.468414] mmc0: new high speed SDHC card at address aaaa
697 20:10:57.382998 <6>[ 5.476989] mmcblk0: mmc0:aaaa SS08G 7.40 GiB
698 20:10:57.392456 <6>[ 5.489074] mmcblk0: p1 p2
699 20:10:57.448082 <6>[ 5.540557] usb 2-2: new high-speed USB device number 2 using ehci-omap
700 20:10:57.646494 <6>[ 5.743041] hub 2-2:1.0: USB hub found
701 20:10:57.652472 <6>[ 5.747344] hub 2-2:1.0: 5 ports detected
702 20:10:57.978199 <6>[ 6.070556] usb 2-2.1: new high-speed USB device number 3 using ehci-omap
703 20:10:58.128697 <6>[ 6.225067] smsc95xx v2.0.0
704 20:10:58.258473 <6>[ 6.346923] SMSC LAN8700 usb-002:003:01: attached PHY driver (mii_bus:phy_addr=usb-002:003:01, irq=180)
705 20:10:58.271797 <6>[ 6.359558] smsc95xx 2-2.1:1.0 eth0: register 'smsc95xx' at usb-48064800.ehci-2.1, smsc95xx USB 2.0 Ethernet, 02:02:00:c9:04:90
706 20:10:58.312893 <6>[ 6.404541] smsc95xx 2-2.1:1.0 eth0: hardware isn't capable of remote wakeup
707 20:10:58.321125 <6>[ 6.415893] smsc95xx 2-2.1:1.0 eth0: Link is Down
708 20:10:59.580069 <6>[ 7.671691] smsc95xx 2-2.1:1.0 eth0: Link is Up - 100Mbps/Half - flow control off
709 20:10:59.673896 <5>[ 7.730895] Sending DHCP requests ., OK
710 20:10:59.685035 <6>[ 7.774841] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.198
711 20:10:59.685654 <6>[ 7.783081] IP-Config: Complete:
712 20:10:59.696756 <6>[ 7.786621] device=eth0, hwaddr=02:02:00:c9:04:90, ipaddr=192.168.0.198, mask=255.255.255.0, gw=192.168.0.254
713 20:10:59.702110 <6>[ 7.797363] host=192.168.0.198, domain=shed, nis-domain=(none)
714 20:10:59.713212 <6>[ 7.804016] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=
715 20:10:59.719701 <6>[ 7.804046] nameserver0=192.168.0.1, nameserver1=192.168.1.254
716 20:10:59.726626 <6>[ 7.818878] clk: Disabling unused clocks
717 20:10:59.729878 <6>[ 7.823699] PM: genpd: Disabling unused power domains
718 20:10:59.745289 <6>[ 7.834747] Freeing unused kernel image (initmem) memory: 2048K
719 20:10:59.745901 <6>[ 7.842041] Run /init as init process
720 20:10:59.750891 <3>[ 7.846923] Failed to execute /init (error -2)
721 20:10:59.757219 <6>[ 7.851745] Run /sbin/init as init process
722 20:10:59.763330 <6>[ 7.856353] Run /etc/init as init process
723 20:10:59.763936 <6>[ 7.860839] Run /bin/init as init process
724 20:10:59.768450 <6>[ 7.865173] Run /bin/sh as init process
725 20:10:59.774629 Matched prompt #9: Kernel panic - not syncing
726 20:10:59.775238 Setting prompt string to ['end Kernel panic[^\\r]*\\r', '/ #', 'Login timed out', 'Login incorrect']
727 20:10:59.785351 <0>[ 7.869476] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance.
728 20:10:59.791126 <4>[ 7.883972] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.10.0-rc5 #1
729 20:10:59.796411 <4>[ 7.892028] Hardware name: Generic OMAP36xx (Flattened Device Tree)
730 20:10:59.802274 <4>[ 7.898590] Call trace:
731 20:10:59.807668 <4>[ 7.898590] unwind_backtrace from show_stack+0xb/0xc
732 20:10:59.813195 <4>[ 7.906768] show_stack from dump_stack_lvl+0x35/0x40
733 20:10:59.818654 <4>[ 7.912139] dump_stack_lvl from panic+0xbb/0x270
734 20:10:59.824383 <4>[ 7.917144] panic from kernel_init+0xef/0xf0
735 20:10:59.825008 <4>[ 7.921783] kernel_init from ret_from_fork+0x11/0x1c
736 20:10:59.830032 <4>[ 7.927154] Exception stack(0xd0009fb0 to 0xd0009ff8)
737 20:10:59.841179 <4>[ 7.932495] 9fa0: 00000000 00000000 00000000 00000000
738 20:10:59.847137 <4>[ 7.940979] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
739 20:10:59.857859 <4>[ 7.949432] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
740 20:10:59.869803 Setting prompt string to ['-\\[ cut here \\]', 'Unhandled fault', 'BUG: KCSAN:', 'BUG: KASAN:', 'BUG: KFENCE:', 'Oops(?: -|:)', 'WARNING:', '(kernel BUG at|BUG:)', 'invalid opcode:', 'Kernel panic - not syncing', '/ #', 'Login timed out', 'Login incorrect']
741 20:10:59.870522 login-action kernel 'panic'
744 20:10:59.873410 end: 2.4.4.1 login-action (duration 00:00:07) [common]
746 20:10:59.874466 auto-login-action failed: 1 of 1 attempts. '<0>[ 7.869476] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance.
<4>[ 7.883972] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.10.0-rc5 #1
<4>[ 7.892028] Hardware name: Generic OMAP36xx (Flattened Device Tree)
<4>[ 7.898590] Call trace:
<4>[ 7.898590] unwind_backtrace from show_stack+0xb/0xc
<4>[ 7.906768] show_stack from dump_stack_lvl+0x35/0x40
<4>[ 7.912139] dump_stack_lvl from panic+0xbb/0x270
<4>[ 7.917144] panic from kernel_init+0xef/0xf0
<4>[ 7.921783] kernel_init from ret_from_fork+0x11/0x1c
<4>[ 7.927154] Exception stack(0xd0009fb0 to 0xd0009ff8)
<4>[ 7.932495] 9fa0: 00000000 00000000 00000000 00000000
<4>[ 7.940979] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 7.949432] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
<0>[ 7.956359] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance. ]---'
748 20:10:59.875417 end: 2.4.4 auto-login-action (duration 00:00:09) [common]
751 20:10:59.877009 end: 2.4 uboot-commands (duration 00:01:03) [common]
753 20:10:59.878082 uboot-action failed: 1 of 1 attempts. '<0>[ 7.869476] Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance.
<4>[ 7.883972] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.10.0-rc5 #1
<4>[ 7.892028] Hardware name: Generic OMAP36xx (Flattened Device Tree)
<4>[ 7.898590] Call trace:
<4>[ 7.898590] unwind_backtrace from show_stack+0xb/0xc
<4>[ 7.906768] show_stack from dump_stack_lvl+0x35/0x40
<4>[ 7.912139] dump_stack_lvl from panic+0xbb/0x270
<4>[ 7.917144] panic from kernel_init+0xef/0xf0
<4>[ 7.921783] kernel_init from ret_from_fork+0x11/0x1c
<4>[ 7.927154] Exception stack(0xd0009fb0 to 0xd0009ff8)
<4>[ 7.932495] 9fa0: 00000000 00000000 00000000 00000000
<4>[ 7.940979] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<4>[ 7.949432] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
<0>[ 7.956359] ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance. ]---'
755 20:10:59.879055 end: 2 uboot-action (duration 00:01:03) [common]
757 20:10:59.880344 Cleaning after the job
758 20:10:59.880898 Cleaning up download directory: /var/lib/lava/dispatcher/tmp/3866970/tftp-deploy-ek4rcx2f/ramdisk
759 20:10:59.888988 Cleaning up download directory: /var/lib/lava/dispatcher/tmp/3866970/tftp-deploy-ek4rcx2f/kernel
760 20:10:59.894299 Cleaning up download directory: /var/lib/lava/dispatcher/tmp/3866970/tftp-deploy-ek4rcx2f/dtb
761 20:10:59.894836 Cleaning up download directory: /var/lib/lava/dispatcher/tmp/3866970/tftp-deploy-ek4rcx2f/modules
762 20:10:59.902404 start: 4.1 power-off (timeout 00:00:30) [common]
763 20:10:59.902753 Calling: ['labgrid-client', '-x', 'ws://nuc-1:20408/ws', '-p', 'omap3-beagle-xm', 'power', 'off']
764 20:11:01.697829 Returned 0 in 1 seconds
765 20:11:01.698104 end: 4.1 power-off (duration 00:00:02) [common]
767 20:11:01.698628 start: 4.2 read-feedback (timeout 00:04:58) [common]
769 20:11:01.699357 Listened to connection for namespace 'common' for up to 1s
770 20:11:02.700335 Finalising connection for namespace 'common'
771 20:11:02.701068 Disconnecting from shell: Finalise
772 20:11:02.802342 end: 4.2 read-feedback (duration 00:00:01) [common]
773 20:11:02.803088 Removing override tmp directory at /var/lib/lava/dispatcher/tmp/3866970
774 20:11:02.863734 Removing root tmp directory at /var/lib/lava/dispatcher/tmp/3866970
775 20:11:02.864003 JobError: Your job cannot terminate cleanly.