Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'.  U-Boot SPL 2020.10 (Apr 28 2023 - 11:09:01 +0100) Trying to boot from MMC2 U-Boot 2020.10 (Apr 28 2023 - 11:09:01 +0100) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB WDT: Started with servicing (60s timeout) MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... Unable to use mmc 1:1... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.1.38 (1178 ms) => setenv serverip 192.168.1.1 setenv serverip 192.168.1.1 => tftp 0x82000000 1209892/tftp-deploy-5kodn1yy/kernel/zImage tftp 0x82000000 1209892/tftp-deploy-5kodn1yy/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.38 Filename '1209892/tftp-deploy-5kodn1yy/kernel/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################### 2.3 MiB/s done Bytes transferred = 5390176 (523f60 hex) => tftp 0x83000000 1209892/tftp-deploy-5kodn1yy/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 1209892/tftp-deploy-5kodn1yy/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.38 Filename '1209892/tftp-deploy-5kodn1yy/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 2 MiB/s done Bytes transferred = 15717837 (efd5cd hex) =>setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 1209892/tftp-deploy-5kodn1yy/dtb/am335x-boneblack.dtb tftp 0x88000000 1209892/tftp-deploy-5kodn1yy/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.38 Filename '1209892/tftp-deploy-5kodn1yy/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *##### 1.9 MiB/s done Bytes transferred = 70568 (113a8 hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2024-10-20 22:56:57 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 15717773 Bytes = 15 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 880143a7 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.0-rc3 (KernelCI@build-j348809-arm-gcc-12-omap2plus-defconfig-zp99q) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Sun Oct 20 21:23:24 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omap8250 at MMIO 0x44e09000 (options '') [ 0.000000] printk: legacy bootconsole [omap8250] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 on node -1 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fdfffff] [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon) [ 0.000000] percpu: Embedded 17 pages/cpu s40460 r8192 d20980 u69632 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130560 <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] TI gptimer clocksource: always-on /ocp/interconnect@44c00000/segment@200000/target-module@31000 <6>[ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008342] clocksource: dmtimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.018634] TI gptimer clockevent: 24000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@40000 <6>[ 0.030299] Console: colour dummy device 80x30 <3>[ 0.035204] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' <3>[ 0.042298] This ensures that you still see kernel messages. Please <3>[ 0.049035] update your kernel commandline. <6>[ 0.053647] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.095657] CPU: Testing write buffer coherency: ok <6>[ 0.101045] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.106517] pid_max: default: 32768 minimum: 301 <6>[ 0.111672] LSM: initializing lsm=capability <6>[ 0.116501] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.124348] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) <6>[ 0.134202] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.199058] Setting up static identity map for 0x80100000 - 0x80100078 <6>[ 0.206410] rcu: Hierarchical SRCU implementation. <6>[ 0.211674] rcu: Max phase no-delay instances is 1000. <6>[ 0.218431] smp: Bringing up secondary CPUs ... <6>[ 0.223496] smp: Brought up 1 node, 1 CPU <6>[ 0.227900] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.234655] CPU: All CPU(s) started in SVC mode. <6>[ 0.239871] Memory: 466648K/522240K available (11264K kernel code, 1157K rwdata, 2712K rodata, 1024K init, 298K bss, 37580K reserved, 16384K cma-reserved, 0K highmem) <6>[ 0.256356] devtmpfs: initialized <6>[ 0.274781] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.283433] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.293913] futex hash table entries: 256 (order: 2, 16384 bytes, linear) <6>[ 0.302451] pinctrl core: initialized pinctrl subsystem <6>[ 0.310697] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.319948] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.327869] audit: initializing netlink subsys (disabled) <6>[ 0.335069] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.335096] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.341739] thermal_sys: Registered thermal governor 'user_space' <5>[ 0.348325] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 <6>[ 0.363225] cpuidle: using governor menu <6>[ 0.389596] No ATAGs? <6>[ 0.392240] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 0.401319] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.432134] iommu: Default domain type: Translated <6>[ 0.437361] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.459600] SCSI subsystem initialized <6>[ 0.469511] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.474902] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.484654] PTP clock support registered <6>[ 0.519231] vgaarb: loaded <6>[ 0.522674] clocksource: Switched to clocksource dmtimer <5>[ 0.529209] VFS: Disk quotas dquot_6.6.0 <6>[ 0.533634] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 0.578090] NET: Registered PF_INET protocol family <6>[ 0.583850] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.592974] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.601880] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.610187] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) <6>[ 0.618493] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) <6>[ 0.626222] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 0.633170] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 0.640181] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) <6>[ 0.647824] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.730127] RPC: Registered named UNIX socket transport module. <6>[ 0.736592] RPC: Registered udp transport module. <6>[ 0.741703] RPC: Registered tcp transport module. <6>[ 0.746834] RPC: Registered tcp-with-tls transport module. <6>[ 0.752769] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.759685] PCI: CLS 0 bytes, default 64 <5>[ 0.765396] Initialise system trusted keyrings <6>[ 0.781594] Trying to unpack rootfs image as initramfs... <6>[ 0.873011] workingset: timestamp_bits=14 max_order=17 bucket_order=3 <5>[ 0.896979] NFS: Registering the id_resolver key type <5>[ 0.902551] Key type id_resolver registered <5>[ 0.907188] Key type id_legacy registered <6>[ 0.911637] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. <5>[ 0.969505] Key type asymmetric registered <5>[ 0.974136] Asymmetric key parser 'x509' registered <6>[ 0.979503] io scheduler mq-deadline registered <6>[ 0.984520] io scheduler kyber registered <6>[ 0.988998] io scheduler bfq registered <6>[ 1.043011] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.083067] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled <6>[ 1.186283] brd: module loaded <6>[ 1.235137] loop: module loaded <3>[ 1.239573] mtdoops: mtd device (mtddev=name/number) must be supplied <6>[ 1.285919] i2c_dev: i2c /dev entries driver <5>[ 1.291465] cpuidle: enable-method property 'ti,am3352' found operations <6>[ 1.299307] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.306019] sdhci: Copyright(c) Pierre Ossman <6>[ 1.310976] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.318130] Initializing XFRM netlink socket <6>[ 1.323000] NET: Registered PF_INET6 protocol family <6>[ 1.436070] Segment Routing with IPv6 <6>[ 1.440225] In-situ OAM (IOAM) with IPv6 <6>[ 1.444736] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.452048] NET: Registered PF_PACKET protocol family <6>[ 1.457650] NET: Registered PF_KEY protocol family <5>[ 1.463054] Key type dns_resolver registered <6>[ 1.467945] ThumbEE CPU extension supported. <5>[ 1.472716] Registering SWP/SWPB emulation handler <3>[ 1.478372] omap_voltage_late_init: Voltage driver support not added <6>[ 1.485596] SmartReflex Class3 initialized <5>[ 1.623739] Loading compiled-in X.509 certificates <6>[ 1.720228] platform 44e10800.pinmux: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@10000/scm@0/pinmux@800/clkout2-pins <6>[ 1.736087] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <3>[ 1.747093] ti-sysc 44e31000.target-module: probe with driver ti-sysc failed with error -16 <3>[ 1.856059] ti-sysc 48040000.target-module: probe with driver ti-sysc failed with error -16 <6>[ 1.953489] OMAP GPIO hardware version 0.1 <6>[ 2.004971] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <3>[ 2.059178] 48000000.interconnect:segment@200000:target-module@0:mpu@0:fck: device ID is greater than 24 <6>[ 2.073632] platform 4830e000.lcdc: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <4>[ 2.097802] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 2.123800] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 2.203727] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 2.931614] Freeing initrd memory: 15352K <3>[ 2.994710] SMSC LAN8710/LAN8720 4a101000.mdio:00: probe with driver SMSC LAN8710/LAN8720 failed with error -5 <6>[ 3.005481] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 3.015856] cpsw-switch 4a100000.switch: initialized cpsw ale version 1.4 <6>[ 3.023251] cpsw-switch 4a100000.switch: ALE Table size 1024, Policers 0 <6>[ 3.030784] cpsw-switch 4a100000.switch: cpts: overflow check period 500 (jiffies) <6>[ 3.038955] cpsw-switch 4a100000.switch: CPTS: ref_clk_freq:250000000 calc_mult:2147483648 calc_shift:29 error:0 nsec/sec <6>[ 3.050636] cpsw-switch 4a100000.switch: Detected MACID = f4:b8:98:ab:fa:84 <5>[ 3.059887] cpsw-switch 4a100000.switch: initialized (regs 0x4a100000, pool size 256) hw_ver:0019010C 1.12 (0) <3>[ 3.081034] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present! <6>[ 3.089660] edma 49000000.dma: TI EDMA DMA engine driver <3>[ 3.114372] target-module@4b000000:target-module@140000:pmu@0:fck: device ID is greater than 24 <3>[ 3.130376] cpsw-125mhz-clkctrl:0014:0: failed to disable <6>[ 3.137137] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 (8000000f) counters available <3>[ 3.154570] l3-aon-clkctrl:0000:0: failed to disable <6>[ 3.163337] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 34, base_baud = 3000000) is a 8250 <6>[ 3.172743] printk: legacy console [ttyS0] enabled <6>[ 3.172743] printk: legacy console [ttyS0] enabled <6>[ 3.183062] printk: legacy bootconsole [omap8250] disabled <6>[ 3.183062] printk: legacy bootconsole [omap8250] disabled <4>[ 3.213719] tps65217-pmic: Failed to locate of_node [id: -1] <4>[ 3.220047] tps65217-bl: Failed to locate of_node [id: -1] <6>[ 3.231532] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 3.237937] platform 4830e000.lcdc: Fixed dependency cycle(s) with /ocp/interconnect@44c00000/segment@200000/target-module@b000/i2c@0/tda19988@70 <6>[ 3.251600] i2c 0-0070: Fixed dependency cycle(s) with /ocp/interconnect@48000000/segment@300000/target-module@e000/lcdc@0 <6>[ 3.263299] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <6>[ 3.272997] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 3.282017] sdhci-omap 48060000.mmc: Got CD GPIO <4>[ 3.287328] sdhci-omap 48060000.mmc: supply pbias not found, using dummy regulator <4>[ 3.297667] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator <4>[ 3.308226] sdhci-omap 481d8000.mmc: supply pbias not found, using dummy regulator <4>[ 3.317603] sdhci-omap 481d8000.mmc: supply vqmmc not found, using dummy regulator <6>[ 3.355567] mmc1: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA <6>[ 3.364807] mmc0: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA <6>[ 3.373897] cpsw-switch 4a100000.switch: starting ndev. mode: dual_mac <3>[ 3.404180] cpsw-switch 4a100000.switch: phy \"/ocp/interconnect@4a000000/segment@0/target-module@100000/switch@0/mdio@1000/ethernet-phy@0\" not found on slave 0 <5>[ 3.442703] Sending DHCP requests . <6>[ 3.445227] mmc1: new high speed MMC card at address 0001 <6>[ 3.456373] mmcblk1: mmc1:0001 MK2704 3.53 GiB <6>[ 3.464211] mmcblk1: p1 <6>[ 3.468136] mmcblk1boot0: mmc1:0001 MK2704 2.00 MiB <6>[ 3.475584] mmcblk1boot1: mmc1:0001 MK2704 2.00 MiB <6>[ 3.482823] mmcblk1rpmb: mmc1:0001 MK2704 512 KiB, chardev (250:0) <4>[ 6.402668] ..... timed out! <3>[ 94.068647] IP-Config: Reopening network devices... <6>[ 94.074019] cpsw-switch 4a100000.switch: starting ndev. mode: dual_mac <3>[ 94.103612] cpsw-switch 4a100000.switch: phy \"/ocp/interconnect@4a000000/segment@0/target-module@100000/switch@0/mdio@1000/ethernet-phy@0\" not found on slave 0 <5>[ 94.142707] Sending DHCP requests .. <2>[ 99.152666] cpsw-switch 4a100000.switch eth0: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 5040 ms <4>[ 100.342665] .... timed out! <3>[ 170.288486] IP-Config: Auto-configuration of network failed <6>[ 170.294720] clk: Disabling unused clocks <6>[ 170.299128] PM: genpd: Disabling unused power domains <6>[ 170.306899] Freeing unused kernel image (initmem) memory: 1024K <6>[ 170.313869] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 170.570636] udevd[98]: starting version 3.2.9 <5>[ 171.362696] random: crng init done <27>[ 171.377829] udevd[98]: specified user 'tss' unknown <27>[ 171.383663] udevd[98]: specified group 'tss' unknown <30>[ 171.403239] udevd[99]: starting eudev-3.2.9 <6>[ 172.152092] remoteproc remoteproc0: wkup_m3 is available <4>[ 172.220933] am335x-phy-driver 47401300.usb-phy: dummy supplies not allowed for exclusive requests (id=vbus) <4>[ 172.314414] at24 2-0054: supply vcc not found, using dummy regulator <3>[ 172.349241] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <4>[ 172.364524] am335x-phy-driver 47401b00.usb-phy: dummy supplies not allowed for exclusive requests (id=vbus) <3>[ 172.375831] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 172.448542] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec <4>[ 172.459732] at24 2-0055: supply vcc not found, using dummy regulator <3>[ 172.468457] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 172.480841] omap_rtc 44e3e000.rtc: registered as rtc0 <6>[ 172.486435] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01T00:00:00 UTC (946684800) <3>[ 172.544640] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 172.554520] usbcore: registered new interface driver usbfs <6>[ 172.560498] usbcore: registered new interface driver hub <6>[ 172.566324] usbcore: registered new device driver usb <4>[ 172.572382] at24 2-0056: supply vcc not found, using dummy regulator <4>[ 172.611130] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set <3>[ 172.648884] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <4>[ 172.695356] at24 2-0057: supply vcc not found, using dummy regulator <3>[ 172.757873] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 172.775420] input: tps65217_pwrbutton as /devices/platform/ocp/44c00000.interconnect/44c00000.interconnect:segment@200000/44e0b000.target-module/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 <6>[ 172.800317] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 172.806206] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 172.816857] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <3>[ 172.853859] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 172.936191] tda998x 0-0070: found TDA19988 <6>[ 172.963456] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 <6>[ 172.972078] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 172.979724] usb usb1: Product: MUSB HDRC host driver <6>[ 172.985031] usb usb1: Manufacturer: Linux 6.12.0-rc3 musb-hcd <6>[ 172.991072] usb usb1: SerialNumber: musb-hdrc.1 <3>[ 173.099417] wkup_m3_ipc 44e11324.wkup_m3_ipc: IPC Request for A8->M3 Channel failed! -517 <6>[ 173.192908] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 <6>[ 173.279231] remoteproc remoteproc0: powering up wkup_m3 <6>[ 173.328037] hub 1-0:1.0: USB hub found <4>[ 173.358259] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2 <3>[ 173.368295] remoteproc remoteproc0: request_firmware failed: -2 <3>[ 173.374576] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed <6>[ 173.403034] hub 1-0:1.0: 1 port detected <6>[ 173.610627] omap_rng 48310000.rng: Random Number Generator ver. 20 <6>[ 173.618311] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_audio_codec_init [tda998x]) <6>[ 173.674942] [drm] Initialized tilcdc 1.0.0 for 4830e000.lcdc on minor 0 <6>[ 173.713892] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <6>[ 173.841310] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes <3>[ 173.966191] PM: Cannot get wkup_m3_ipc handle <6>[ 173.985789] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 <6>[ 173.997177] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 <6>[ 174.040108] omap-sham 53100000.sham: will run requests pump with realtime priority <3>[ 174.049204] PM: Cannot get wkup_m3_ipc handle <6>[ 174.075011] omap-aes 53500000.aes: will run requests pump with realtime priority <3>[ 174.091531] PM: Cannot get wkup_m3_ipc handle <3>[ 174.891493] PM: Cannot get wkup_m3_ipc handle <3>[ 174.936598] PM: Cannot get wkup_m3_ipc handle done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1209892/environment . /lava-1209892/environment / # /lava-1209892/bin/lava-test-runner /lava-1209892/0 /lava-1209892/bin/lava-test-runner /lava-1209892/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1209892/0/tests/0_dmesg + cat uuid + UUID=1209892_1.5.2.4.1 <8>[ 176.007177] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh kern :crit : cpsw-switch 4a100000.switch eth0: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 5040 ms <8>[ 176.083711] <8>[ 176.151886] <8>[ 176.220494] + set +x <8>[ 176.232327] / #