connecting to NetworkSerialPort(target=Target(name='tegra124-jetson-tk1', env=None), name='default', state=, avail=True, host='nuc-1', port=43527, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t nuc-1:43527 connected to 192.168.0.1 (port 43527) Escape character: Ctrl-\ Type the escape character to get to the prompt. U-Boot SPL 2015.10 (Dec 03 2015 - 13:25:02) U-Boot 2015.10 (Dec 03 2015 - 13:25:02 -0800) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 tegra-pcie: PCI regions: tegra-pcie: I/O: 0x12000000-0x12010000 tegra-pcie: non-prefetchable memory: 0x13000000-0x20000000 tegra-pcie: prefetchable memory: 0x20000000-0x40000000 tegra-pcie: 2x1, 1x1 configuration tegra-pcie: probing port 0, using 2 lanes tegra-pcie: link 0 down, retrying tegra-pcie: link 0 down, retrying tegra-pcie: link 0 down, retrying tegra-pcie: link 0 down, ignoring tegra-pcie: probing port 1, using 1 lanes In: serial Out: serial Err: serial Net: RTL8169#0 Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # setenv autoload no setenv autoload no Tegra124 (Jetson TK1) # setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff Tegra124 (Jetson TK1) # setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff Tegra124 (Jetson TK1) # dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.0.212 (8 ms) Tegra124 (Jetson TK1) # setenv serverip 192.168.0.2 setenv serverip 192.168.0.2 Tegra124 (Jetson TK1) # tftp 0x81000000 4004544/tftp-deploy-tborxmn3/kernel/zImage tftp 0x81000000 4004544/tftp-deploy-tborxmn3/kernel/zImage Using RTL8169#0 device TFTP from server 192.168.0.2; our IP address is 192.168.0.212 Filename '4004544/tftp-deploy-tborxmn3/kernel/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 2.5 MiB/s done Bytes transferred = 11166208 (aa6200 hex) Tegra124 (Jetson TK1) # tftp 0x82800000 4004544/tftp-deploy-tborxmn3/ramdisk/ramdisk.cpio.gz.uboot tftp 0x82800000 4004544/tftp-deploy-tborxmn3/ramdisk/ramdisk.cpio.gz.uboot Using RTL8169#0 device TFTP from server 192.168.0.2; our IP address is 192.168.0.212 Filename '4004544/tftp-deploy-tborxmn3/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x82800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 2.5 MiB/s done Bytes transferred = 17984780 (1126d0c hex) Tegra124 (Jetson TK1) # setenv initrd_size ${filesize} setenv initrd_size ${filesize} Tegra124 (Jetson TK1) # tftp 0x83f80000 4004544/tftp-deploy-tborxmn3/dtb/tegra124-jetson-tk1.dtb tftp 0x83f80000 4004544/tftp-deploy-tborxmn3/dtb/tegra124-jetson-tk1.dtb Using RTL8169#0 device TFTP from server 192.168.0.2; our IP address is 192.168.0.212 Filename '4004544/tftp-deploy-tborxmn3/dtb/tegra124-jetson-tk1.dtb'. Load address: 0x83f80000 Loading: *###### 2.5 MiB/s done Bytes transferred = 73434 (11eda hex) Tegra124 (Jetson TK1) # setenv bootargs 'console=ttyS0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp' setenv bootargs 'console=ttyS0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp' Tegra124 (Jetson TK1) # bootz 0x81000000 0x82800000 0x83f80000 bootz 0x81000000 0x82800000 0x83f80000 Kernel image @ 0x81000000 [ 0x000000 - 0xaa6200 ] ## Loading init Ramdisk from Legacy Image at 82800000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17984716 Bytes = 17.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83f80000 Booting using the fdt blob at 0x83f80000 Using Device Tree in place at 83f80000, end 83f94ed9 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.9.0-rc6 (KernelCI@build-j187006-arm-gcc-10-multi-v7-defconfig-sr9s5) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Sat May 4 00:43:23 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] earlycon: uart0 at MMIO 0x70006300 (options '115200n8') [ 0.000000] printk: legacy bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 on node -1 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000afffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x00000000b0000000-0x00000000ffefffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000ffefffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffefffff] [ 0.000000] percpu: Embedded 17 pages/cpu s40340 r8192 d21100 u69632 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 1967720K/2096128K available (15360K kernel code, 2520K rwdata, 6592K rodata, 2048K init, 430K bss, 62872K reserved, 65536K cma-reserved, 1244160K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] clocksource: tegra_suspend_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.000000] arch_timer: cp15 timer(s) running at 12.00MHz (virt). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns <6>[ 0.000001] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns <6>[ 0.008582] Switching to timer-based delay loop, resolution 83ns <6>[ 0.015680] Console: colour dummy device 80x30 <6>[ 0.020607] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) <6>[ 0.031636] CPU: Testing write buffer coherency: ok <6>[ 0.037002] CPU0: Spectre v2: using ICIALLU workaround <6>[ 0.042614] CPU0: Spectre BHB: enabling loop workaround for all CPUs <6>[ 0.049473] pid_max: default: 32768 minimum: 301 <6>[ 0.054672] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.062532] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <3>[ 0.071612] /cpus/cpu@0 missing clock-frequency property <3>[ 0.077437] /cpus/cpu@1 missing clock-frequency property <3>[ 0.083279] /cpus/cpu@2 missing clock-frequency property <3>[ 0.089098] /cpus/cpu@3 missing clock-frequency property <6>[ 0.094900] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.101909] Setting up static identity map for 0x80300000 - 0x803000ac <6>[ 0.111217] rcu: Hierarchical SRCU implementation. <6>[ 0.116456] rcu: Max phase no-delay instances is 1000. <6>[ 0.125147] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 <6>[ 0.134357] EFI services will not be available. <6>[ 0.139627] smp: Bringing up secondary CPUs ... <6>[ 0.145376] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <3>[ 0.145396] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable <6>[ 0.162462] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 <3>[ 0.162482] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable <6>[ 0.179554] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 <3>[ 0.179574] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable <6>[ 0.195948] smp: Brought up 1 node, 4 CPUs <6>[ 0.200473] SMP: Total of 4 processors activated (96.00 BogoMIPS). <6>[ 0.207178] CPU: All CPU(s) started in SVC mode. <6>[ 0.213268] devtmpfs: initialized <6>[ 0.233552] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 <6>[ 0.242029] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.252525] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.261222] pinctrl core: initialized pinctrl subsystem <6>[ 0.270995] DMI not present or invalid. <6>[ 0.276371] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.284940] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.296016] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.296078] cpuidle: using governor menu <6>[ 0.316357] platform 70000868.pinmux: Fixed dependency cycle(s) with /pinmux@70000868/pinmux <6>[ 0.348555] No ATAGs? <6>[ 0.351312] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.359910] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.382604] Serial: AMBA PL011 UART driver <3>[ 0.388501] tegra-mc 70019000.memory-controller: ppcsahbslvr: secure read @0x7fd41100: EMEM address decode error (EMEM decode error) <6>[ 0.420385] iommu: Default domain type: Translated <6>[ 0.425659] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.442098] SCSI subsystem initialized <6>[ 0.446721] usbcore: registered new interface driver usbfs <6>[ 0.452722] usbcore: registered new interface driver hub <6>[ 0.458582] usbcore: registered new device driver usb <6>[ 0.465861] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.471306] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.481093] PTP clock support registered <6>[ 0.485678] EDAC MC: Ver: 3.0.0 <6>[ 0.489708] scmi_core: SCMI protocol bus registered <6>[ 0.497707] vgaarb: loaded <6>[ 0.509622] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.529185] NET: Registered PF_INET protocol family <6>[ 0.534738] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.544217] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.553192] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.561518] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.569913] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 0.577997] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.584956] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.592149] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.599898] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.606518] RPC: Registered named UNIX socket transport module. <6>[ 0.612959] RPC: Registered udp transport module. <6>[ 0.618112] RPC: Registered tcp transport module. <6>[ 0.623276] RPC: Registered tcp-with-tls transport module. <6>[ 0.629235] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.636210] PCI: CLS 0 bytes, default 64 <6>[ 0.641803] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available <6>[ 0.642034] Trying to unpack rootfs image as initramfs... <5>[ 0.653495] Initialise system trusted keyrings <6>[ 0.656481] rootfs image is not initramfs (invalid magic at start of compressed archive); looks like an initrd <6>[ 0.661639] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 0.679421] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 0.686180] NFS: Registering the id_resolver key type <5>[ 0.691803] Key type id_resolver registered <5>[ 0.696434] Key type id_legacy registered <6>[ 0.700963] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.708224] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 0.716265] ntfs3: Max link count 4000 <5>[ 0.720846] Key type asymmetric registered <5>[ 0.725395] Asymmetric key parser 'x509' registered <6>[ 0.730908] bounce: pool size: 64 pages <6>[ 0.735243] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 0.743248] io scheduler mq-deadline registered <6>[ 0.748232] io scheduler kyber registered <6>[ 0.752715] io scheduler bfq registered <6>[ 0.755068] Freeing initrd memory: 17564K <4>[ 0.781558] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. <6>[ 0.817049] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver registered 32 channels <6>[ 0.830100] tegra-pmc 7000e400.pmc: emergency thermal reset enabled <6>[ 0.911044] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 0.923397] printk: legacy console [ttyS0] disabled <6>[ 0.929138] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 74, base_baud = 25500000) is a Tegra <6>[ 0.938674] printk: legacy console [ttyS0] enabled <6>[ 0.938674] printk: legacy console [ttyS0] enabled <6>[ 0.948965] printk: legacy bootconsole [uart0] disabled <6>[ 0.948965] printk: legacy bootconsole [uart0] disabled <6>[ 0.973016] msm_serial: driver initialized <6>[ 0.977828] SuperH (H)SCI(F) driver initialized <6>[ 0.983011] STMicroelectronics ASC driver initialized <6>[ 0.988478] STM32 USART driver initialized <6>[ 0.993973] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 75, base_baud = 0) is a TEGRA_UART <6>[ 1.003940] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 76, base_baud = 0) is a TEGRA_UART <6>[ 1.017034] tegra-host1x 50000000.host1x: Adding to iommu group 0 <6>[ 1.033642] tegra-vic 54340000.vic: Adding to iommu group 1 <6>[ 1.055576] brd: module loaded <6>[ 1.065737] loop: module loaded <3>[ 1.121297] spi spi1.0: Invalid delay unit 2, should be SPI_DELAY_UNIT_SCK <3>[ 1.128439] spi-tegra114 7000da00.spi: can't setup spi1.0, status -22 <3>[ 1.135178] spi_master spi1: spi_device register error /spi@7000da00/flash@0 <4>[ 1.142533] spi_master spi1: Failed to create SPI device for /spi@7000da00/flash@0 <6>[ 1.155839] CAN device driver interface <6>[ 1.161314] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 1.168722] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 1.173976] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.180215] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 1.185870] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.197308] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 1.203199] usbcore: registered new interface driver pegasus <6>[ 1.209148] usbcore: registered new interface driver asix <6>[ 1.214854] usbcore: registered new interface driver ax88179_178a <6>[ 1.221252] usbcore: registered new interface driver cdc_ether <6>[ 1.227372] usbcore: registered new interface driver smsc75xx <6>[ 1.233424] usbcore: registered new interface driver smsc95xx <6>[ 1.239460] usbcore: registered new interface driver net1080 <6>[ 1.245440] usbcore: registered new interface driver cdc_subset <6>[ 1.251665] usbcore: registered new interface driver zaurus <6>[ 1.257548] usbcore: registered new interface driver cdc_ncm <4>[ 1.263941] tegra-phy 7d000000.usb-phy: supply vbus not found, using dummy regulator <4>[ 1.272382] tegra-phy 7d004000.usb-phy: supply vbus not found, using dummy regulator <6>[ 1.285551] usbcore: registered new interface driver usb-storage <6>[ 1.344855] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 1.350041] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 1.409645] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.10 <6>[ 1.416203] hub 1-0:1.0: USB hub found <6>[ 1.420278] hub 1-0:1.0: 1 port detected <6>[ 1.430326] tegra_rtc 7000e000.rtc: registered as rtc1 <5>[ 1.435732] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock <6>[ 1.442873] i2c_dev: i2c /dev entries driver <4>[ 1.465668] at24 0-0056: supply vcc not found, using dummy regulator <6>[ 1.491089] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write <6>[ 1.530822] i2c 4-0040: Fixed dependency cycle(s) with /i2c@7000d000/pmic@40/pinmux <6>[ 1.549410] as3722 4-0040: AS3722 with revision 0x1 found <6>[ 1.591173] as3722-rtc as3722-rtc: registered as rtc0 <3>[ 1.597141] as3722-rtc as3722-rtc: hctosys: unable to read the hardware clock <6>[ 1.604569] as3722-rtc as3722-rtc: RTC interrupt 105 <3>[ 1.613848] as3722-regulator as3722-regulator: regulator 2 register failed -517 <4>[ 1.631692] lm90 0-004c: supply vcc not found, using dummy regulator <6>[ 1.641202] hwmon hwmon0: temp1_input not attached to any thermal zone <6>[ 1.648169] hwmon hwmon0: temp2_input not attached to any thermal zone <6>[ 1.667022] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.673480] sdhci: Copyright(c) Pierre Ossman <6>[ 1.680504] Synopsys Designware Multimedia Card Interface Driver <6>[ 1.688893] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.699176] sdhci-tegra 700b0400.mmc: Got CD GPIO <6>[ 1.704634] sdhci-tegra 700b0400.mmc: Got WP GPIO <6>[ 1.710625] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.718832] usbcore: registered new interface driver usbhid <6>[ 1.724691] usbhid: USB HID core driver <6>[ 1.733782] tegra-emc 7001b000.external-memory-controller: 64bit DRAM bus <6>[ 1.742952] tegra-emc 7001b000.external-memory-controller: OPP HW ver. 0x2, current clock rate 924 MHz <6>[ 1.756735] NET: Registered PF_INET6 protocol family <4>[ 1.762618] mmc1: Invalid maximum block size, assuming 512 bytes <6>[ 1.769938] Segment Routing with IPv6 <6>[ 1.773941] In-situ OAM (IOAM) with IPv6 <6>[ 1.778206] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.785067] NET: Registered PF_PACKET protocol family <6>[ 1.790401] can: controller area network core <6>[ 1.795063] NET: Registered PF_CAN protocol family <6>[ 1.800129] can: raw protocol <6>[ 1.801461] mmc1: SDHCI controller on 700b0600.mmc [700b0600.mmc] using ADMA 64-bit <6>[ 1.803359] can: broadcast manager protocol <6>[ 1.815731] can: netlink gateway - max_hops=1 <5>[ 1.820697] Key type dns_resolver registered <6>[ 1.826710] ThumbEE CPU extension supported. <5>[ 1.831300] Registering SWP/SWPB emulation handler <6>[ 1.849122] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <5>[ 1.858246] Loading compiled-in X.509 certificates <3>[ 1.900874] as3722 4-0040: Failed to create device link (0x180) with regulator-5v0sys <3>[ 1.909593] as3722 4-0040: Failed to create device link (0x180) with regulator-3v3sys <6>[ 1.921730] reg-fixed-voltage regulator-12v0sata: nonexclusive access to GPIO for (default) <6>[ 1.926012] tegra-dc 54200000.dc: Adding to iommu group 1 <4>[ 1.936160] Failed to attached device 54200000.dc to IOMMU_mapping <6>[ 1.944235] tegra-dc 54240000.dc: Adding to iommu group 1 <4>[ 1.950075] Failed to attached device 54240000.dc to IOMMU_mapping <6>[ 1.958821] mmc1: new high speed MMC card at address 0001 <6>[ 1.965356] mmcblk1: mmc1:0001 SEM16G 14.7 GiB <6>[ 1.973905] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 <6>[ 1.980879] mmcblk1boot0: mmc1:0001 SEM16G 4.00 MiB <6>[ 1.985350] ci_hdrc ci_hdrc.2: EHCI Host Controller <6>[ 1.991276] ci_hdrc ci_hdrc.2: new USB bus registered, assigned bus number 2 <6>[ 1.992840] mmcblk1boot1: mmc1:0001 SEM16G 4.00 MiB <6>[ 2.005492] mmcblk1rpmb: mmc1:0001 SEM16G 4.00 MiB, chardev (236:0) <6>[ 2.039790] ci_hdrc ci_hdrc.2: USB 2.0 started, EHCI 1.10 <6>[ 2.046648] hub 2-0:1.0: USB hub found <6>[ 2.050805] hub 2-0:1.0: 1 port detected <4>[ 2.061223] as3722-regulator as3722-regulator: DMA mask not set <6>[ 2.068424] tegra-pcie 1003000.pcie: host bridge /pcie@1003000 ranges: <6>[ 2.072091] sdhci-tegra 700b0400.mmc: Got CD GPIO <6>[ 2.075321] tegra-pcie 1003000.pcie: MEM 0x0001000000..0x0001001fff -> 0x0001000000 <6>[ 2.080437] sdhci-tegra 700b0400.mmc: Got WP GPIO <6>[ 2.088613] tegra-pcie 1003000.pcie: IO 0x0012000000..0x001200ffff -> 0x0000000000 <3>[ 2.095971] as3722 4-0040: Failed to create device link (0x180) with regulator-3v3run <6>[ 2.102034] tegra-pcie 1003000.pcie: MEM 0x0013000000..0x001fffffff -> 0x0013000000 <6>[ 2.113527] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV <6>[ 2.118479] tegra-pcie 1003000.pcie: MEM 0x0020000000..0x003fffffff -> 0x0020000000 <6>[ 2.129324] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV <6>[ 2.133300] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration <6>[ 2.141374] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV <3>[ 2.145703] tegra-pcie 1003000.pcie: failed to get PHY#0: -517 <6>[ 2.153473] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV <3>[ 2.158173] tegra-pcie 1003000.pcie: failed to get PHYs: -517 <6>[ 2.165123] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV <3>[ 2.170326] tegra-pcie 1003000.pcie: failed to request resources: -517 <6>[ 2.189409] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 696000 KHz, changing to: 714000 KHz <3>[ 2.201832] +VDDIO_SDMMC3: bypassed regulator has no supply! <4>[ 2.203498] usb2-0: supply vbus not found, using dummy regulator <4>[ 2.214265] usb2-1: supply vbus not found, using dummy regulator <6>[ 2.221098] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV <6>[ 2.223123] tegra-pcie 1003000.pcie: host bridge /pcie@1003000 ranges: <6>[ 2.234562] tegra-pcie 1003000.pcie: MEM 0x0001000000..0x0001001fff -> 0x0001000000 <6>[ 2.242983] tegra-pcie 1003000.pcie: IO 0x0012000000..0x001200ffff -> 0x0000000000 <6>[ 2.251415] tegra-pcie 1003000.pcie: MEM 0x0013000000..0x001fffffff -> 0x0013000000 <6>[ 2.259819] tegra-pcie 1003000.pcie: MEM 0x0020000000..0x003fffffff -> 0x0020000000 <6>[ 2.268242] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration <6>[ 2.274617] sdhci-tegra 700b0400.mmc: Got CD GPIO <6>[ 2.275408] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV <6>[ 2.275823] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes <6>[ 2.277848] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes <6>[ 2.279892] sdhci-tegra 700b0400.mmc: Got WP GPIO <6>[ 2.287174] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV <4>[ 2.310407] mmc0: Invalid maximum block size, assuming 512 bytes <6>[ 2.310611] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV <6>[ 2.350586] mmc0: SDHCI controller on 700b0400.mmc [700b0400.mmc] using ADMA 64-bit <6>[ 2.700467] mmc0: new high speed SD card at address 0260 <6>[ 2.707543] mmcblk0: mmc0:0260 1232 961 MiB <6>[ 2.715154] mmcblk0: p1 p2 <6>[ 3.487905] tegra-pcie 1003000.pcie: link 0 down, ignoring <6>[ 3.500042] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 <6>[ 3.506579] pci_bus 0000:00: root bus resource [bus 00-ff] <6>[ 3.512379] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01001fff] <6>[ 3.519514] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] <6>[ 3.525975] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] <6>[ 3.533126] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] <6>[ 3.541065] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 PCIe Root Port <4>[ 3.548636] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits <6>[ 3.558589] pci 0000:00:02.0: PCI bridge to [bus 00] <6>[ 3.563838] pci 0000:00:02.0: bridge window [io 0x0000-0x0fff] <6>[ 3.570229] pci 0000:00:02.0: enabling Extended Tags <6>[ 3.575529] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 3.586949] PCI: bus0: Fast back to back transfers disabled <6>[ 3.592806] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring <6>[ 3.601269] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint <6>[ 3.608779] pci 0000:01:00.0: BAR 0 [io 0x0000-0x00ff] <6>[ 3.614318] pci 0000:01:00.0: BAR 2 [mem 0x00000000-0x00000fff 64bit] <6>[ 3.621066] pci 0000:01:00.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] <6>[ 3.628386] pci 0000:01:00.0: supports D1 D2 <6>[ 3.632936] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 3.669641] PCI: bus1: Fast back to back transfers disabled <6>[ 3.675462] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 <6>[ 3.682340] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff]: assigned <6>[ 3.690103] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref]: assigned <6>[ 3.698800] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]: assigned <6>[ 3.705866] pci 0000:01:00.0: BAR 4 [mem 0x20000000-0x20003fff 64bit pref]: assigned <6>[ 3.713913] pci 0000:01:00.0: BAR 2 [mem 0x13000000-0x13000fff 64bit]: assigned <6>[ 3.721528] pci 0000:01:00.0: BAR 0 [io 0x1000-0x10ff]: assigned <6>[ 3.727890] pci 0000:00:02.0: PCI bridge to [bus 01] <6>[ 3.733134] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] <6>[ 3.739492] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] <6>[ 3.746554] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] <4>[ 3.754607] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge <6>[ 3.761934] pcieport 0000:00:02.0: enabling device (0140 -> 0143) <6>[ 3.768377] pcieport 0000:00:02.0: PME: Signaling with IRQ 125 <6>[ 3.774741] r8169 0000:01:00.0: enabling device (0140 -> 0143) <6>[ 3.814269] r8169 0000:01:00.0 eth0: RTL8168g/8111g, 00:04:4b:21:2a:66, XID 4c0, IRQ 128 <6>[ 3.822776] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <4>[ 3.837693] tegra-ahci 70027000.sata: supply ahci not found, using dummy regulator <4>[ 3.845690] tegra-ahci 70027000.sata: supply phy not found, using dummy regulator <4>[ 3.853606] tegra-ahci 70027000.sata: supply target not found, using dummy regulator <6>[ 3.862461] tegra-ahci 70027000.sata: AHCI vers 0001.0301, 32 command slots, 3 Gbps, platform mode <6>[ 3.871689] tegra-ahci 70027000.sata: 1/2 ports implemented (port mask 0x1) <6>[ 3.878896] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pmp pio slum part sadm sds apst <6>[ 3.889062] scsi host0: tegra-ahci <6>[ 3.893260] scsi host1: tegra-ahci <6>[ 3.897051] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 131 lpm-pol 0 <6>[ 3.906212] ata2: DUMMY <6>[ 3.909490] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 <6>[ 4.242324] ata1: SATA link down (SStatus 0 SControl 300) <4>[ 4.252486] r8169 0000:01:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2 <3>[ 4.262005] r8169 0000:01:00.0: Unable to load firmware rtl_nic/rtl8168g-2.fw (-2) <6>[ 4.309805] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC) <6>[ 4.480472] r8169 0000:01:00.0 eth0: Link is Down <6>[ 6.164954] r8169 0000:01:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx <5>[ 6.219833] Sending DHCP requests ., OK <6>[ 6.263998] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.212 <6>[ 6.272118] IP-Config: Complete: <6>[ 6.275625] device=eth0, hwaddr=00:04:4b:21:2a:66, ipaddr=192.168.0.212, mask=255.255.255.0, gw=192.168.0.254 <6>[ 6.286294] host=192.168.0.212, domain=shed, nis-domain=(none) <6>[ 6.292881] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath= <6>[ 6.292909] nameserver0=192.168.0.1, nameserver1=192.168.1.254 <6>[ 6.307092] clk: Disabling unused clocks <6>[ 6.312003] PM: genpd: Disabling unused power domains <5>[ 6.318737] RAMDISK: Couldn't find valid RAM disk image starting at 0. <3>[ 6.328359] ntfs3: ram0: Primary boot signature is not NTFS. <3>[ 6.334313] ntfs3: ram0: try to read out of volume at offset 0x3fffe00 <3>[ 6.341214] ntfs3: ram0: Primary boot signature is not NTFS. <3>[ 6.347145] ntfs3: ram0: try to read out of volume at offset 0x3fffe00 <4>[ 6.353992] List of all partitions: <4>[ 6.357742] 0100 65536 ram0 <4>[ 6.357747] (driver?) <4>[ 6.364357] 0101 65536 ram1 <4>[ 6.364360] (driver?) <4>[ 6.370973] 0102 65536 ram2 <4>[ 6.370976] (driver?) <4>[ 6.377581] 0103 65536 ram3 <4>[ 6.377584] (driver?) <4>[ 6.384203] 0104 65536 ram4 <4>[ 6.384206] (driver?) <4>[ 6.390815] 0105 65536 ram5 <4>[ 6.390818] (driver?) <4>[ 6.397423] 0106 65536 ram6 <4>[ 6.397425] (driver?) <4>[ 6.404035] 0107 65536 ram7 <4>[ 6.404038] (driver?) <4>[ 6.410648] 0108 65536 ram8 <4>[ 6.410651] (driver?) <4>[ 6.417255] 0109 65536 ram9 <4>[ 6.417258] (driver?) <4>[ 6.423868] 010a 65536 ram10 <4>[ 6.423870] (driver?) <4>[ 6.430566] 010b 65536 ram11 <4>[ 6.430568] (driver?) <4>[ 6.437259] 010c 65536 ram12 <4>[ 6.437262] (driver?) <4>[ 6.443958] 010d 65536 ram13 <4>[ 6.443961] (driver?) <4>[ 6.450656] 010e 65536 ram14 <4>[ 6.450659] (driver?) <4>[ 6.457350] 010f 65536 ram15 <4>[ 6.457353] (driver?) <4>[ 6.464053] b300 15388672 mmcblk1 <4>[ 6.464056] driver: mmcblk <4>[ 6.471359] b301 8388608 mmcblk1p1 7369c667-ff51-ec4a-29cd-baabf2fbe346 <4>[ 6.471363] <4>[ 6.480831] b302 4096 mmcblk1p2 f854c27c-e81b-8de7-765a-2e63339fc99a <4>[ 6.480834] <4>[ 6.490305] b303 65536 mmcblk1p3 b70d3266-5831-5aa3-255d-051758e95ed4 <4>[ 6.490308] <4>[ 6.499776] b304 4096 mmcblk1p4 c6cdb2ab-b49b-1154-0e82-7441213ddc87 <4>[ 6.499779] <4>[ 6.509243] b305 4096 mmcblk1p5 a13ee970-e141-67fc-3e01-7e97eadc6b96 <4>[ 6.509246] <4>[ 6.518714] b306 4096 mmcblk1p6 2a5c388f-b0ec-fb3b-32af-3c54ec18db5c <4>[ 6.518718] <4>[ 6.528185] b307 4096 mmcblk1p7 43fe1a02-fafb-3aaa-fb29-d1e6053c7c94 <4>[ 6.528189] <4>[ 6.537657] b308 6887424 mmcblk1p8 61bed875-f989-bb5c-a899-0f95b1ebf1b3 <4>[ 6.537660] <4>[ 6.547132] b310 4096 mmcblk1boot0 <4>[ 6.547135] (driver?) <4>[ 6.554440] b320 4096 mmcblk1boot1 <4>[ 6.554443] (driver?) <4>[ 6.561746] b330 984064 mmcblk0 <4>[ 6.561749] driver: mmcblk <4>[ 6.569047] b331 65536 mmcblk0p1 00000000-01 <4>[ 6.569050] <4>[ 6.576352] b332 917504 mmcblk0p2 00000000-02 <4>[ 6.576355] <4>[ 6.583658] No filesystem could mount root, tried: <4>[ 6.583660] ext3 <4>[ 6.588783] ext2 <4>[ 6.590965] ext4 <4>[ 6.593140] squashfs <4>[ 6.595316] vfat <4>[ 6.597838] msdos <4>[ 6.600018] ntfs <4>[ 6.602282] ntfs3 <4>[ 6.604458] <0>[ 6.608462] Kernel panic - not syncing: VFS: Unable to mount root fs on \"/dev/ram0\" or unknown-block(1,0) <4>[ 6.618268] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc6 #1 <4>[ 6.624693] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) <4>[ 6.631204] Call trace: <4>[ 6.631211] unwind_backtrace from show_stack+0x10/0x14 <4>[ 6.639474] show_stack from dump_stack_lvl+0x50/0x64 <4>[ 6.644779] dump_stack_lvl from panic+0x104/0x35c <4>[ 6.649823] panic from mount_root_generic+0x270/0x278 <4>[ 6.655217] mount_root_generic from prepare_namespace+0x1f8/0x248 <4>[ 6.661650] prepare_namespace from kernel_init+0x1c/0x12c <4>[ 6.667390] kernel_init from ret_from_fork+0x14/0x28 <4>[ 6.672693] Exception stack(0xf0815fb0 to 0xf0815ff8) <4>[ 6.677993] 5fa0: 00000000 00000000 00000000 00000000 <4>[ 6.686411] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 6.694830] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 <0>[ 6.701731] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on \"/dev/ram0\" or unknown-block(1,0) ]---