connecting to NetworkSerialPort(target=Target(name='tegra124-jetson-tk1', env=None), name='default', state=, avail=True, host='nuc-1', port=36093, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t nuc-1:36093 connected to 192.168.0.1 (port 36093) Escape character: Ctrl-\ Type the escape character to get to the prompt. U-Boot SPL 2015.10 (Dec 03 2015 - 13:25:02) U-Boot 2015.10 (Dec 03 2015 - 13:25:02 -0800) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 tegra-pcie: PCI regions: tegra-pcie: I/O: 0x12000000-0x12010000 tegra-pcie: non-prefetchable memory: 0x13000000-0x20000000 tegra-pcie: prefetchable memory: 0x20000000-0x40000000 tegra-pcie: 2x1, 1x1 configuration tegra-pcie: probing port 0, using 2 lanes tegra-pcie: link 0 down, retrying tegra-pcie: link 0 down, retrying tegra-pcie: link 0 down, retrying tegra-pcie: link 0 down, ignoring tegra-pcie: probing port 1, using 1 lanes In: serial Out: serial Err: serial Net: RTL8169#0 Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # setenv autoload no setenv autoload no Tegra124 (Jetson TK1) # setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff Tegra124 (Jetson TK1) # setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff Tegra124 (Jetson TK1) # dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.0.212 (8 ms) Tegra124 (Jetson TK1) # setenv serverip 192.168.0.2 setenv serverip 192.168.0.2 Tegra124 (Jetson TK1) # tftp 0x81000000 3995738/tftp-deploy-30d0l9h8/kernel/zImage tftp 0x81000000 3995738/tftp-deploy-30d0l9h8/kernel/zImage Using RTL8169#0 device TFTP from server 192.168.0.2; our IP address is 192.168.0.212 Filename '3995738/tftp-deploy-30d0l9h8/kernel/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 2.6 MiB/s done Bytes transferred = 11280896 (ac2200 hex) Tegra124 (Jetson TK1) # tftp 0x82800000 3995738/tftp-deploy-30d0l9h8/ramdisk/ramdisk.cpio.gz.uboot tftp 0x82800000 3995738/tftp-deploy-30d0l9h8/ramdisk/ramdisk.cpio.gz.uboot Using RTL8169#0 device TFTP from server 192.168.0.2; our IP address is 192.168.0.212 Filename '3995738/tftp-deploy-30d0l9h8/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x82800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 2.5 MiB/s done Bytes transferred = 18002216 (112b128 hex) Tegra124 (Jetson TK1) # setenv initrd_size ${filesize} setenv initrd_size ${filesize} Tegra124 (Jetson TK1) # tftp 0x83f80000 3995738/tftp-deploy-30d0l9h8/dtb/tegra124-jetson-tk1.dtb tftp 0x83f80000 3995738/tftp-deploy-30d0l9h8/dtb/tegra124-jetson-tk1.dtb Using RTL8169#0 device TFTP from server 192.168.0.2; our IP address is 192.168.0.212 Filename '3995738/tftp-deploy-30d0l9h8/dtb/tegra124-jetson-tk1.dtb'. Load address: 0x83f80000 Loading: *###### 2.9 MiB/s done Bytes transferred = 73434 (11eda hex) Tegra124 (Jetson TK1) # setenv bootargs 'console=ttyS0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp' setenv bootargs 'console=ttyS0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp' Tegra124 (Jetson TK1) # bootz 0x81000000 0x82800000 0x83f80000 bootz 0x81000000 0x82800000 0x83f80000 Kernel image @ 0x81000000 [ 0x000000 - 0xac2200 ] ## Loading init Ramdisk from Legacy Image at 82800000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 18002152 Bytes = 17.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83f80000 Booting using the fdt blob at 0x83f80000 Using Device Tree in place at 83f80000, end 83f94ed9 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.9.0-rc5-next-20240426 (KernelCI@build-j177840-arm-gcc-10-multi-v7-defconfig-config-efi-y-p7jsr) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Fri Apr 26 08:00:55 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] earlycon: uart0 at MMIO 0x0000000070006300 (options '115200n8') [ 0.000000] printk: legacy bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x00000000fb800000 on node -1 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000afffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x00000000b0000000-0x00000000ffefffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000ffefffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffefffff] [ 0.000000] percpu: Embedded 17 pages/cpu s40404 r8192 d21036 u69632 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=:::::eth0:dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 524032 <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off, mlocked free:off <6>[ 0.000000] Memory: 1965628K/2096128K available (16384K kernel code, 2533K rwdata, 6696K rodata, 2048K init, 436K bss, 64964K reserved, 65536K cma-reserved, 1244160K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] clocksource: tegra_suspend_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.000000] arch_timer: cp15 timer(s) running at 12.00MHz (virt). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns <6>[ 0.000001] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns <6>[ 0.008578] Switching to timer-based delay loop, resolution 83ns <6>[ 0.015666] Console: colour dummy device 80x30 <6>[ 0.020594] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) <6>[ 0.031621] CPU: Testing write buffer coherency: ok <6>[ 0.036998] CPU0: Spectre v2: using ICIALLU workaround <6>[ 0.042610] CPU0: Spectre BHB: enabling loop workaround for all CPUs <6>[ 0.049469] pid_max: default: 32768 minimum: 301 <6>[ 0.054670] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.062532] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <3>[ 0.071638] /cpus/cpu@0 missing clock-frequency property <3>[ 0.077463] /cpus/cpu@1 missing clock-frequency property <3>[ 0.083303] /cpus/cpu@2 missing clock-frequency property <3>[ 0.089122] /cpus/cpu@3 missing clock-frequency property <6>[ 0.094924] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.102037] Setting up static identity map for 0x80400000 - 0x80400184 <6>[ 0.111323] rcu: Hierarchical SRCU implementation. <6>[ 0.116563] rcu: Max phase no-delay instances is 1000. <6>[ 0.125229] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 <6>[ 0.134376] EFI services will not be available. <6>[ 0.139651] smp: Bringing up secondary CPUs ... <6>[ 0.145409] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <3>[ 0.145429] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable <6>[ 0.162497] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 <3>[ 0.162516] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable <6>[ 0.179584] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 <3>[ 0.179603] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable <6>[ 0.195973] smp: Brought up 1 node, 4 CPUs <6>[ 0.200497] SMP: Total of 4 processors activated (96.00 BogoMIPS). <6>[ 0.207202] CPU: All CPU(s) started in SVC mode. <6>[ 0.213308] devtmpfs: initialized <6>[ 0.233598] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 <6>[ 0.242076] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.252569] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.261457] pinctrl core: initialized pinctrl subsystem <6>[ 0.271168] DMI not present or invalid. <6>[ 0.276550] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.285086] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.296155] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.296216] cpuidle: using governor menu <6>[ 0.316824] platform 70000868.pinmux: Fixed dependency cycle(s) with /pinmux@70000868/pinmux <6>[ 0.349329] No ATAGs? <6>[ 0.352085] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.360680] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.383374] Serial: AMBA PL011 UART driver <3>[ 0.389285] tegra-mc 70019000.memory-controller: ppcsahbslvr: secure read @0x000000007fd41100: EMEM address decode error (EMEM decode error) <6>[ 0.424319] iommu: Default domain type: Translated <6>[ 0.429608] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.438051] SCSI subsystem initialized <6>[ 0.442674] usbcore: registered new interface driver usbfs <6>[ 0.448672] usbcore: registered new interface driver hub <6>[ 0.454524] usbcore: registered new device driver usb <6>[ 0.461793] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.467244] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.477030] PTP clock support registered <6>[ 0.481630] EDAC MC: Ver: 3.0.0 <6>[ 0.485539] scmi_core: SCMI protocol bus registered <6>[ 0.493544] vgaarb: loaded <6>[ 0.500857] clocksource: Switched to clocksource arch_sys_counter <6>[ 0.519277] NET: Registered PF_INET protocol family <6>[ 0.524828] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.534300] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.543278] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.551603] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.559984] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 0.568079] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.575035] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.582228] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.589961] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.596641] RPC: Registered named UNIX socket transport module. <6>[ 0.603081] RPC: Registered udp transport module. <6>[ 0.608233] RPC: Registered tcp transport module. <6>[ 0.613395] RPC: Registered tcp-with-tls transport module. <6>[ 0.619355] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.626327] PCI: CLS 0 bytes, default 64 <6>[ 0.631192] Trying to unpack rootfs image as initramfs... <6>[ 0.637077] rootfs image is not initramfs (invalid magic at start of compressed archive); looks like an initrd <6>[ 0.647866] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available <5>[ 0.658513] Initialise system trusted keyrings <6>[ 0.663737] workingset: timestamp_bits=30 max_order=19 bucket_order=0 <6>[ 0.671188] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 0.677913] NFS: Registering the id_resolver key type <5>[ 0.683558] Key type id_resolver registered <5>[ 0.688192] Key type id_legacy registered <6>[ 0.692736] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.700002] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <5>[ 0.708476] Key type asymmetric registered <5>[ 0.713048] Asymmetric key parser 'x509' registered <6>[ 0.718488] bounce: pool size: 64 pages <6>[ 0.722817] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) <6>[ 0.730146] Freeing initrd memory: 17584K <6>[ 0.730789] io scheduler mq-deadline registered <6>[ 0.740188] io scheduler kyber registered <6>[ 0.744649] io scheduler bfq registered <4>[ 0.779645] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. <6>[ 0.815234] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver registered 32 channels <6>[ 0.828258] tegra-pmc 7000e400.pmc: emergency thermal reset enabled <6>[ 0.905809] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 0.918234] printk: legacy console [ttyS0] disabled <6>[ 0.924039] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 74, base_baud = 25500000) is a Tegra <6>[ 0.933584] printk: legacy console [ttyS0] enabled <6>[ 0.933584] printk: legacy console [ttyS0] enabled <6>[ 0.943871] printk: legacy bootconsole [uart0] disabled <6>[ 0.943871] printk: legacy bootconsole [uart0] disabled <6>[ 0.961185] msm_serial: driver initialized <6>[ 0.966013] SuperH (H)SCI(F) driver initialized <6>[ 0.971222] STMicroelectronics ASC driver initialized <6>[ 0.976685] STM32 USART driver initialized <6>[ 0.982180] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 75, base_baud = 0) is a TEGRA_UART <6>[ 0.992181] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 76, base_baud = 0) is a TEGRA_UART <6>[ 1.005284] tegra-host1x 50000000.host1x: Adding to iommu group 0 <6>[ 1.021988] tegra-vic 54340000.vic: Adding to iommu group 1 <6>[ 1.046704] brd: module loaded <6>[ 1.056896] loop: module loaded <3>[ 1.122832] spi spi1.0: Invalid delay unit 2, should be SPI_DELAY_UNIT_SCK <3>[ 1.129975] spi-tegra114 7000da00.spi: can't setup spi1.0, status -22 <3>[ 1.136715] spi_master spi1: spi_device register error /spi@7000da00/flash@0 <4>[ 1.144071] spi_master spi1: Failed to create SPI device for /spi@7000da00/flash@0 <6>[ 1.157446] CAN device driver interface <6>[ 1.162926] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 1.170324] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 1.175574] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.181811] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 1.187465] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.198931] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 1.204821] usbcore: registered new interface driver pegasus <6>[ 1.210768] usbcore: registered new interface driver asix <6>[ 1.216473] usbcore: registered new interface driver ax88179_178a <6>[ 1.222870] usbcore: registered new interface driver cdc_ether <6>[ 1.228997] usbcore: registered new interface driver smsc75xx <6>[ 1.235047] usbcore: registered new interface driver smsc95xx <6>[ 1.241104] usbcore: registered new interface driver net1080 <6>[ 1.247052] usbcore: registered new interface driver cdc_subset <6>[ 1.253277] usbcore: registered new interface driver zaurus <6>[ 1.259156] usbcore: registered new interface driver cdc_ncm <4>[ 1.265551] tegra-phy 7d000000.usb-phy: supply vbus not found, using dummy regulator <4>[ 1.273995] tegra-phy 7d004000.usb-phy: supply vbus not found, using dummy regulator <6>[ 1.287182] usbcore: registered new interface driver usb-storage <6>[ 1.346109] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 1.351296] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 1.410881] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.10 <6>[ 1.417418] hub 1-0:1.0: USB hub found <6>[ 1.421502] hub 1-0:1.0: 1 port detected <6>[ 1.431525] tegra_rtc 7000e000.rtc: registered as rtc1 <5>[ 1.436931] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock <6>[ 1.444079] i2c_dev: i2c /dev entries driver <4>[ 1.453745] at24 0-0056: supply vcc not found, using dummy regulator <6>[ 1.479112] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write <6>[ 1.524651] i2c 4-0040: Fixed dependency cycle(s) with /i2c@7000d000/pmic@40/pinmux <6>[ 1.544776] as3722 4-0040: AS3722 with revision 0x1 found <6>[ 1.642975] as3722-rtc as3722-rtc: registered as rtc0 <6>[ 1.649044] as3722-rtc as3722-rtc: setting system clock to 2000-01-01T00:00:18 UTC (946684818) <6>[ 1.657943] as3722-rtc as3722-rtc: RTC interrupt 105 <6>[ 1.659605] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV <6>[ 1.673475] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV <4>[ 1.675912] lm90 0-004c: supply vcc not found, using dummy regulator <6>[ 1.681476] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV <6>[ 1.689203] hwmon hwmon0: temp1_input not attached to any thermal zone <6>[ 1.700207] hwmon hwmon0: temp2_input not attached to any thermal zone <6>[ 1.719168] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.725628] sdhci: Copyright(c) Pierre Ossman <6>[ 1.732726] Synopsys Designware Multimedia Card Interface Driver <6>[ 1.741150] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.751361] sdhci-tegra 700b0400.mmc: Got CD GPIO <6>[ 1.751505] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.751518] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV <6>[ 1.770620] usbcore: registered new interface driver usbhid <6>[ 1.776476] usbhid: USB HID core driver <6>[ 1.785419] tegra-emc 7001b000.external-memory-controller: 64bit DRAM bus <6>[ 1.794566] tegra-emc 7001b000.external-memory-controller: OPP HW ver. 0x2, current clock rate 924 MHz <6>[ 1.808312] NET: Registered PF_INET6 protocol family <4>[ 1.814187] mmc1: Invalid maximum block size, assuming 512 bytes <6>[ 1.814236] sdhci-tegra 700b0400.mmc: Got WP GPIO <6>[ 1.815126] Segment Routing with IPv6 <6>[ 1.815199] In-situ OAM (IOAM) with IPv6 <6>[ 1.815293] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 1.816102] NET: Registered PF_PACKET protocol family <6>[ 1.816115] can: controller area network core <6>[ 1.816176] NET: Registered PF_CAN protocol family <6>[ 1.816188] can: raw protocol <6>[ 1.816199] can: broadcast manager protocol <6>[ 1.816221] can: netlink gateway - max_hops=1 <5>[ 1.816658] Key type dns_resolver registered <6>[ 1.821335] ThumbEE CPU extension supported. <6>[ 1.853504] mmc1: SDHCI controller on 700b0600.mmc [700b0600.mmc] using ADMA 64-bit <5>[ 1.854844] Registering SWP/SWPB emulation handler <6>[ 1.901752] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV <6>[ 1.901812] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <3>[ 1.910694] +VDDIO_SDMMC3: bypassed regulator has no supply! <3>[ 1.922850] as3722-regulator as3722-regulator: regulator 13 register failed -517 <5>[ 1.930743] Loading compiled-in X.509 certificates <6>[ 1.961293] mmc1: new high speed MMC card at address 0001 <6>[ 1.967898] mmcblk1: mmc1:0001 SEM16G 14.7 GiB <6>[ 1.979429] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 <3>[ 1.980335] as3722 4-0040: Failed to create device link (0x180) with regulator-3v3run <6>[ 1.986340] mmcblk1boot0: mmc1:0001 SEM16G 4.00 MiB <6>[ 1.996405] reg-fixed-voltage regulator-12v0sata: nonexclusive access to GPIO for (default) <6>[ 1.999345] mmcblk1boot1: mmc1:0001 SEM16G 4.00 MiB <6>[ 2.001444] tegra-dc 54200000.dc: Adding to iommu group 1 <4>[ 2.001585] Failed to attached device 54200000.dc to IOMMU_mapping <6>[ 2.003095] tegra-dc 54240000.dc: Adding to iommu group 1 <4>[ 2.003209] Failed to attached device 54240000.dc to IOMMU_mapping <6>[ 2.032145] ci_hdrc ci_hdrc.2: EHCI Host Controller <6>[ 2.037213] mmcblk1rpmb: mmc1:0001 SEM16G 4.00 MiB, chardev (235:0) <6>[ 2.040465] ci_hdrc ci_hdrc.2: new USB bus registered, assigned bus number 2 <6>[ 2.080961] ci_hdrc ci_hdrc.2: USB 2.0 started, EHCI 1.10 <6>[ 2.087781] hub 2-0:1.0: USB hub found <6>[ 2.091925] hub 2-0:1.0: 1 port detected <4>[ 2.105489] as3722-regulator as3722-regulator: DMA mask not set <6>[ 2.108013] tegra-pcie 1003000.pcie: host bridge /pcie@1003000 ranges: <6>[ 2.111844] sdhci-tegra 700b0400.mmc: Got CD GPIO <6>[ 2.118539] tegra-pcie 1003000.pcie: MEM 0x0001000000..0x0001001fff -> 0x0001000000 <6>[ 2.123686] sdhci-tegra 700b0400.mmc: Got WP GPIO <6>[ 2.131907] tegra-pcie 1003000.pcie: IO 0x0012000000..0x001200ffff -> 0x0000000000 <6>[ 2.145302] tegra-pcie 1003000.pcie: MEM 0x0013000000..0x001fffffff -> 0x0013000000 <3>[ 2.148928] +VDDIO_SDMMC3: bypassed regulator has no supply! <6>[ 2.153737] tegra-pcie 1003000.pcie: MEM 0x0020000000..0x003fffffff -> 0x0020000000 <6>[ 2.161017] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV <6>[ 2.168222] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration <6>[ 2.176322] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV <3>[ 2.181259] tegra-pcie 1003000.pcie: failed to get PHY#0: -517 <6>[ 2.189392] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV <3>[ 2.192828] tegra-pcie 1003000.pcie: failed to get PHYs: -517 <3>[ 2.192848] tegra-pcie 1003000.pcie: failed to request resources: -517 <6>[ 2.201083] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV <6>[ 2.224042] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 696000 KHz, changing to: 714000 KHz <4>[ 2.238020] usb2-0: supply vbus not found, using dummy regulator <4>[ 2.244697] usb2-1: supply vbus not found, using dummy regulator <6>[ 2.253400] tegra-pcie 1003000.pcie: host bridge /pcie@1003000 ranges: <6>[ 2.260193] tegra-pcie 1003000.pcie: MEM 0x0001000000..0x0001001fff -> 0x0001000000 <6>[ 2.268572] tegra-pcie 1003000.pcie: IO 0x0012000000..0x001200ffff -> 0x0000000000 <6>[ 2.276952] tegra-pcie 1003000.pcie: MEM 0x0013000000..0x001fffffff -> 0x0013000000 <6>[ 2.285344] tegra-pcie 1003000.pcie: MEM 0x0020000000..0x003fffffff -> 0x0020000000 <6>[ 2.293823] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration <6>[ 2.299963] sdhci-tegra 700b0400.mmc: Got CD GPIO <6>[ 2.301093] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes <6>[ 2.311430] sdhci-tegra 700b0400.mmc: Got WP GPIO <6>[ 2.313401] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes <4>[ 2.331336] mmc0: Invalid maximum block size, assuming 512 bytes <6>[ 2.373657] mmc0: SDHCI controller on 700b0400.mmc [700b0400.mmc] using ADMA 64-bit <6>[ 2.728227] mmc0: new high speed SD card at address 0260 <6>[ 2.735672] mmcblk0: mmc0:0260 1232 961 MiB <6>[ 2.743045] mmcblk0: p1 p2 <6>[ 3.530955] tegra-pcie 1003000.pcie: link 0 down, ignoring <6>[ 3.543234] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 <6>[ 3.549761] pci_bus 0000:00: root bus resource [bus 00-ff] <6>[ 3.555532] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01001fff] <6>[ 3.562734] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] <6>[ 3.569180] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] <6>[ 3.576330] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] <6>[ 3.584349] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 PCIe Root Port <4>[ 3.591981] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits <6>[ 3.601979] pci 0000:00:02.0: PCI bridge to [bus 00] <6>[ 3.607242] pci 0000:00:02.0: bridge window [io 0x0000-0x0fff] <6>[ 3.613669] pci 0000:00:02.0: enabling Extended Tags <6>[ 3.618980] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 3.630006] PCI: bus0: Fast back to back transfers disabled <6>[ 3.635891] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring <6>[ 3.644445] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint <6>[ 3.652018] pci 0000:01:00.0: BAR 0 [io 0x0000-0x00ff] <6>[ 3.657557] pci 0000:01:00.0: BAR 2 [mem 0x00000000-0x00000fff 64bit] <6>[ 3.664343] pci 0000:01:00.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] <6>[ 3.671740] pci 0000:01:00.0: supports D1 D2 <6>[ 3.676282] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 3.710889] PCI: bus1: Fast back to back transfers disabled <6>[ 3.716717] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 <6>[ 3.723601] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff]: assigned <6>[ 3.731374] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref]: assigned <6>[ 3.740073] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]: assigned <6>[ 3.747142] pci 0000:01:00.0: BAR 4 [mem 0x20000000-0x20003fff 64bit pref]: assigned <6>[ 3.755192] pci 0000:01:00.0: BAR 2 [mem 0x13000000-0x13000fff 64bit]: assigned <6>[ 3.762810] pci 0000:01:00.0: BAR 0 [io 0x1000-0x10ff]: assigned <6>[ 3.769175] pci 0000:00:02.0: PCI bridge to [bus 01] <6>[ 3.774421] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] <6>[ 3.780779] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff] <6>[ 3.787845] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] <4>[ 3.795903] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge <6>[ 3.803232] pcieport 0000:00:02.0: enabling device (0140 -> 0143) <6>[ 3.809675] pcieport 0000:00:02.0: PME: Signaling with IRQ 125 <6>[ 3.816042] r8169 0000:01:00.0: enabling device (0140 -> 0143) <6>[ 3.856125] r8169 0000:01:00.0 eth0: RTL8168g/8111g, 00:04:4b:21:2a:66, XID 4c0, IRQ 128 <6>[ 3.864567] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <4>[ 3.877496] tegra-ahci 70027000.sata: supply ahci not found, using dummy regulator <4>[ 3.885485] tegra-ahci 70027000.sata: supply phy not found, using dummy regulator <4>[ 3.893390] tegra-ahci 70027000.sata: supply target not found, using dummy regulator <6>[ 3.901982] tegra-ahci 70027000.sata: AHCI vers 0001.0301, 32 command slots, 3 Gbps, platform mode <6>[ 3.911194] tegra-ahci 70027000.sata: 1/2 ports implemented (port mask 0x1) <6>[ 3.918402] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pmp pio slum part sadm sds apst <6>[ 3.928793] scsi host0: tegra-ahci <6>[ 3.932929] scsi host1: tegra-ahci <6>[ 3.936722] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 131 lpm-pol 0 <6>[ 3.945860] ata2: DUMMY <6>[ 3.949001] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 <6>[ 4.273670] ata1: SATA link down (SStatus 0 SControl 300) <4>[ 4.286223] r8169 0000:01:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2 <3>[ 4.295815] r8169 0000:01:00.0: Unable to load firmware rtl_nic/rtl8168g-2.fw (-2) <6>[ 4.341077] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC) <6>[ 4.511804] r8169 0000:01:00.0 eth0: Link is Down <6>[ 6.131026] r8169 0000:01:00.0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx <5>[ 6.171069] Sending DHCP requests ., OK <6>[ 6.216371] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.212 <6>[ 6.224652] IP-Config: Complete: <6>[ 6.228178] device=eth0, hwaddr=00:04:4b:21:2a:66, ipaddr=192.168.0.212, mask=255.255.255.0, gw=192.168.0.254 <6>[ 6.238958] host=192.168.0.212, domain=lan, nis-domain=(none) <6>[ 6.245530] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath= <6>[ 6.245583] nameserver0=192.168.0.1, nameserver1=192.168.1.254 <6>[ 6.260163] clk: Disabling unused clocks <6>[ 6.265365] PM: genpd: Disabling unused power domains <5>[ 6.273003] RAMDISK: Couldn't find valid RAM disk image starting at 0. <3>[ 6.282861] ntfs3: ram0: Primary boot signature is not NTFS. <3>[ 6.288778] ntfs3: ram0: try to read out of volume at offset 0x3fffe00 <3>[ 6.295695] ntfs3: ram0: Primary boot signature is not NTFS. <3>[ 6.301651] ntfs3: ram0: try to read out of volume at offset 0x3fffe00 <4>[ 6.308456] List of all partitions: <4>[ 6.312225] 0100 65536 ram0 <4>[ 6.312232] (driver?) <4>[ 6.318839] 0101 65536 ram1 <4>[ 6.318842] (driver?) <4>[ 6.325484] 0102 65536 ram2 <4>[ 6.325491] (driver?) <4>[ 6.332139] 0103 65536 ram3 <4>[ 6.332145] (driver?) <4>[ 6.338752] 0104 65536 ram4 <4>[ 6.338755] (driver?) <4>[ 6.345403] 0105 65536 ram5 <4>[ 6.345409] (driver?) <4>[ 6.352042] 0106 65536 ram6 <4>[ 6.352047] (driver?) <4>[ 6.358654] 0107 65536 ram7 <4>[ 6.358657] (driver?) <4>[ 6.365286] 0108 65536 ram8 <4>[ 6.365292] (driver?) <4>[ 6.371927] 0109 65536 ram9 <4>[ 6.371932] (driver?) <4>[ 6.378539] 010a 65536 ram10 <4>[ 6.378542] (driver?) <4>[ 6.385258] 010b 65536 ram11 <4>[ 6.385264] (driver?) <4>[ 6.391986] 010c 65536 ram12 <4>[ 6.391991] (driver?) <4>[ 6.398685] 010d 65536 ram13 <4>[ 6.398688] (driver?) <4>[ 6.405423] 010e 65536 ram14 <4>[ 6.405429] (driver?) <4>[ 6.412143] 010f 65536 ram15 <4>[ 6.412148] (driver?) <4>[ 6.418845] b300 15388672 mmcblk1 <4>[ 6.418848] driver: mmcblk <4>[ 6.426169] b301 8388608 mmcblk1p1 7369c667-ff51-ec4a-29cd-baabf2fbe346 <4>[ 6.426175] <4>[ 6.435662] b302 4096 mmcblk1p2 f854c27c-e81b-8de7-765a-2e63339fc99a <4>[ 6.435665] <4>[ 6.445153] b303 65536 mmcblk1p3 b70d3266-5831-5aa3-255d-051758e95ed4 <4>[ 6.445159] <4>[ 6.454652] b304 4096 mmcblk1p4 c6cdb2ab-b49b-1154-0e82-7441213ddc87 <4>[ 6.454656] <4>[ 6.464164] b305 4096 mmcblk1p5 a13ee970-e141-67fc-3e01-7e97eadc6b96 <4>[ 6.464171] <4>[ 6.473657] b306 4096 mmcblk1p6 2a5c388f-b0ec-fb3b-32af-3c54ec18db5c <4>[ 6.473661] <4>[ 6.483150] b307 4096 mmcblk1p7 43fe1a02-fafb-3aaa-fb29-d1e6053c7c94 <4>[ 6.483156] <4>[ 6.492643] b308 6887424 mmcblk1p8 61bed875-f989-bb5c-a899-0f95b1ebf1b3 <4>[ 6.492646] <4>[ 6.502130] b310 4096 mmcblk1boot0 <4>[ 6.502137] (driver?) <4>[ 6.509450] b320 4096 mmcblk1boot1 <4>[ 6.509456] (driver?) <4>[ 6.516775] b330 984064 mmcblk0 <4>[ 6.516778] driver: mmcblk <4>[ 6.524099] b331 65536 mmcblk0p1 00000000-01 <4>[ 6.524106] <4>[ 6.531426] b332 917504 mmcblk0p2 00000000-02 <4>[ 6.531432] <4>[ 6.538734] No filesystem could mount root, tried: <4>[ 6.538736] ext3 <4>[ 6.543873] ext2 <4>[ 6.546056] ext4 <4>[ 6.548239] squashfs <4>[ 6.550416] vfat <4>[ 6.552960] msdos <4>[ 6.555138] ntfs <4>[ 6.557401] ntfs3 <4>[ 6.559576] <0>[ 6.563607] Kernel panic - not syncing: VFS: Unable to mount root fs on \"/dev/ram0\" or unknown-block(1,0) <4>[ 6.573425] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc5-next-20240426 #1 <4>[ 6.581078] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) <4>[ 6.587597] Call trace: <4>[ 6.587603] unwind_backtrace from show_stack+0x10/0x14 <4>[ 6.595867] show_stack from dump_stack_lvl+0x50/0x64 <4>[ 6.601171] dump_stack_lvl from panic+0x104/0x35c <4>[ 6.606216] panic from mount_root_generic+0x270/0x278 <4>[ 6.611607] mount_root_generic from prepare_namespace+0x1f8/0x248 <4>[ 6.618035] prepare_namespace from kernel_init+0x1c/0x12c <4>[ 6.623772] kernel_init from ret_from_fork+0x14/0x38 <4>[ 6.629075] Exception stack(0xf0815fb0 to 0xf0815ff8) <4>[ 6.634373] 5fa0: 00000000 00000000 00000000 00000000 <4>[ 6.642792] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <4>[ 6.651209] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 <0>[ 6.658131] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on \"/dev/ram0\" or unknown-block(1,0) ]---