Trying 0.0.0.0... Connected to 0. Escape character is '^]'. U-Boot SPL 2020.04-00169-g6acfd972fb (Mar 18 2021 - 21:55:22 +0100) Initializing DDR....using raw memory timing SPI boot Trying to boot from SPI U-Boot 2020.04-00169-g6acfd972fb (Mar 18 2021 - 21:55:22 +0100) SoC: LS1028A Rev1.0 (0x870b0110) Clock Configuration: CPU0(A72):1300 MHz CPU1(A72):1300 MHz Bus: 400 MHz DDR: 1600 MT/s Reset Configuration Word (RCW): 00000000: 34004010 00000030 00000000 00000000 00000010: 00000000 008f0000 0030c000 00000000 00000020: 06200000 00002580 00000000 00019016 00000030: 00000000 00000048 00000000 00000000 00000040: 00000000 00000000 00000000 00000000 00000050: 00000000 00000000 00000000 00000000 00000060: 00000103 00000000 100e7026 00000000 00000070: bb580000 00020000 Model: Kontron SMARC-sAL28 Board Hardware Variant: Single PHY (3) RCW: sl28-3-11_q.bin DRAM: Detected UDIMM Fixed DDR on board 3.9 GiB DDR 3.9 GiB (DDR3, 32-bit, CL=11, ECC on) Using SERDES1 Protocol: 47960 (0xbb58) PCIe1: pcie@3400000 Root Complex: no link PCIe2: pcie@3500000 Root Complex: no link CPLD: v18 WDT: Started with servicing (60s timeout) Waking secondary cores to start from fbd3c000 All (2) cores are up. MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from SPI Flash... SF: Detected w25q32jw with page size 256 Bytes, erase size 64 KiB, total 4 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial VPD: Using device 0x50 on I2C Bus 2 Net: eth0: enetc-0, eth2: enetc-2 Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffffffffffff setenv initrd_high 0xffffffffffffffff => setenv fdt_high 0xffffffffffffffff setenv fdt_high 0xffffffffffffffff => dhcp dhcp enetc-0 Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 172.16.0.103 (1255 ms) => setenv serverip 10.228.65.1 setenv serverip 10.228.65.1 => tftp 0x82000000 510152/tftp-deploy-zdty728k/kernel/Image tftp 0x82000000 510152/tftp-deploy-zdty728k/kernel/Image Using enetc-0 device TFTP from server 10.228.65.1; our IP address is 172.16.0.103; sending through gateway 172.16.0.254 Filename '510152/tftp-deploy-zdty728k/kernel/Image'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #### 14.8 MiB/s done Bytes transferred = 66843136 (3fbf200 hex) => tftp 0x90080000 510152/tftp-deploy-zdty728k/ramdisk/ramdisk.cpio.gz.uboot tftp 0x90080000 510152/tftp-deploy-zdty728k/ramdisk/ramdisk.cpio.gz.uboot Using enetc-0 device TFTP from server 10.228.65.1; our IP address is 172.16.0.103; sending through gateway 172.16.0.254 Filename '510152/tftp-deploy-zdty728k/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x90080000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################### 15.7 MiB/s done Bytes transferred = 33792807 (203a327 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x90000000 510152/tftp-deploy-zdty728k/dtb/fsl-ls1028a-kontron-sl28-var3-ads2.dtb tftp 0x90000000 510152/tftp-deploy-zdty728k/dtb/fsl-ls1028a-kontron-sl28-var3-ads2.dtb Using enetc-0 device TFTP from server 10.228.65.1; our IP address is 172.16.0.103; sending through gateway 172.16.0.254 Filename '510152/tftp-deploy-zdty728k/dtb/fsl-ls1028a-kontron-sl28-var3-ads2.dtb'. Load address: 0x90000000 Loading: *### 7.1 MiB/s done Bytes transferred = 29861 (74a5 hex) => setenv bootargs 'console=ttyS0,115200n8 earlycon n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyS0,115200n8 earlycon n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => booti 0x82000000 0x90080000 0x90000000 booti 0x82000000 0x90080000 0x90000000 ## Loading init Ramdisk from Legacy Image at 90080000 ... Image Name: Created: 2024-11-01 9:12:12 UTC Image Type: AArch64 Linux RAMDisk Image (uncompressed) Data Size: 33792743 Bytes = 32.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 90000000 Booting using the fdt blob at 0x90000000 Using Device Tree in place at 0000000090000000, end 000000009000a4a4 WARNING could not find node fsl,ls1028a-gpu: FDT_ERR_NOTFOUND. Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 6.12.0-rc5-next-20241101 (KernelCI@build-j359003-arm64-gcc-12-defconfig-kselftest-rgbz7) (aarch64-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Fri Nov 1 09:02:28 UTC 2024 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier [ 0.000000] efi: UEFI not found. [ 0.000000] earlycon: ns16550a0 at MMIO 0x00000000021c0500 (options '115200n8') [ 0.000000] printk: legacy bootconsole [ns16550a0] enabled [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000020ffffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x20ff8036c0-0x20ff805dff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000020ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fbdfffff] [ 0.000000] node 0: [mem 0x0000002080000000-0x00000020ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000020ffffffff] [ 0.000000] On node 0, zone Normal: 16896 pages in unavailable ranges [ 0.000000] cma: Reserved 32 MiB at 0x00000000f9c00000 on node -1 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] percpu: Embedded 34 pages/cpu s99928 r8192 d31144 u139264 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: console=ttyS0,115200n8 earlycon n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <5>[ 0.000000] Unknown kernel command line parameters \"n8\", will be passed to user space. <6>[ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes <6>[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 0.000000] Fallback order for Node 0: 0 <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1031680 <6>[ 0.000000] Policy zone: Normal <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:on <6>[ 0.000000] mem auto-init: clearing system memory may take some time... <6>[ 0.000000] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.000000] stackdepot hash table entries: 262144 (order: 10, 4194304 bytes, linear) <6>[ 0.000000] software IO TLB: area num 2. <6>[ 0.000000] software IO TLB: mapped [mem 0x00000000f5c00000-0x00000000f9c00000] (64MB) <4>[ 0.000000] ********************************************************** <4>[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.000000] ** ** <4>[ 0.000000] ** This system shows unhashed kernel memory addresses ** <4>[ 0.000000] ** via the console, logs, and other interfaces. This ** <4>[ 0.000000] ** might reduce the security of your system. ** <4>[ 0.000000] ** ** <4>[ 0.000000] ** If you see this message and you are not debugging ** <4>[ 0.000000] ** the kernel, report this immediately to your system ** <4>[ 0.000000] ** administrator! ** <4>[ 0.000000] ** ** <4>[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.000000] ********************************************************** <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] ftrace: allocating 76747 entries in 300 pages <6>[ 0.000000] ftrace: allocated 300 pages with 4 groups <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. <6>[ 0.000000] Trampoline variant of Tasks RCU enabled. <6>[ 0.000000] Rude variant of Tasks RCU enabled. <6>[ 0.000000] Tracing variant of Tasks RCU enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. <6>[ 0.000000] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. <6>[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. <6>[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 <6>[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode <6>[ 0.000000] GICv3: 256 SPIs implemented <6>[ 0.000000] GICv3: 0 Extended SPIs implemented <6>[ 0.000000] Root IRQ handler: gic_handle_irq <6>[ 0.000000] GICv3: GICv3 features: 16 PPIs <6>[ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0 <6>[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006040000 <6>[ 0.000000] ITS [mem 0x06020000-0x0603ffff] <6>[ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices @2080380000 (flat, esz 8, psz 64K, shr 0) <6>[ 0.000000] ITS: using cache flushing for cmd queue <6>[ 0.000000] GICv3: using LPI property table @0x0000002080360000 <6>[ 0.000000] GIC: using cache flushing for LPI property table <6>[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000002080370000 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns <6>[ 0.000000] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns <6>[ 0.009020] Console: colour dummy device 80x25 <6>[ 0.013900] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=25000) <6>[ 0.024544] pid_max: default: 32768 minimum: 301 <6>[ 0.029722] LSM: initializing lsm=capability,landlock,bpf,ima <6>[ 0.035995] landlock: Up and running. <6>[ 0.040543] LSM support for eBPF active <6>[ 0.044988] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.052735] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.067038] rcu: Hierarchical SRCU implementation. <6>[ 0.072163] rcu: Max phase no-delay instances is 400. <6>[ 0.078035] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.090407] fsl-mc MSI: msi-controller@6020000 domain created <6>[ 0.097399] EFI services will not be available. <6>[ 0.103282] smp: Bringing up secondary CPUs ... <6>[ 0.109767] Detected PIPT I-cache on CPU1 <6>[ 0.109816] GICv3: CPU1: found redistributor 1 region 0:0x0000000006060000 <6>[ 0.109826] GICv3: CPU1: using allocated LPI pending table @0x0000002080800000 <6>[ 0.109855] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] <6>[ 0.110007] smp: Brought up 1 node, 2 CPUs <6>[ 0.140366] SMP: Total of 2 processors activated. <6>[ 0.145391] CPU: All CPU(s) started at EL2 <6>[ 0.149830] CPU features: detected: 32-bit EL0 Support <6>[ 0.155290] CPU features: detected: 32-bit EL1 Support <6>[ 0.160746] CPU features: detected: CRC32 instructions <6>[ 0.166240] alternatives: applying system-wide alternatives <6>[ 0.173800] Memory: 3835056K/4126720K available (24704K kernel code, 7868K rwdata, 14828K rodata, 17728K init, 868K bss, 250820K reserved, 32768K cma-reserved) <6>[ 0.189444] devtmpfs: initialized <6>[ 0.214181] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.224311] futex hash table entries: 512 (order: 3, 32768 bytes, linear) <6>[ 0.238006] 16208 pages in range for non-PLT usage <6>[ 0.238016] 507728 pages in range for PLT usage <6>[ 0.243557] pinctrl core: initialized pinctrl subsystem <6>[ 0.256795] Machine: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier <6>[ 0.264449] SoC family: QorIQ LS1028A <6>[ 0.268410] SoC ID: svr:0x870b0110, Revision: 1.0 <6>[ 0.274825] DMI not present or invalid. <6>[ 0.282279] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.290510] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.298120] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.306658] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.315061] audit: initializing netlink subsys (disabled) <5>[ 0.321100] audit: type=2000 audit(0.167:1): state=initialized audit_enabled=0 res=1 <6>[ 0.324086] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.329198] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.335703] cpuidle: using governor menu <6>[ 0.347422] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. <6>[ 0.354608] ASID allocator initialised with 65536 entries <6>[ 0.366656] Serial: AMBA PL011 UART driver <6>[ 0.425920] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.433062] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.439660] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages <6>[ 0.446781] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page <6>[ 0.453376] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.460498] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.467093] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages <6>[ 0.474213] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page <6>[ 0.486470] ACPI: Interpreter disabled. <6>[ 0.499689] iommu: Default domain type: Translated <6>[ 0.504839] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.512341] SCSI subsystem initialized <6>[ 0.518292] usbcore: registered new interface driver usbfs <6>[ 0.524204] usbcore: registered new interface driver hub <6>[ 0.529945] usbcore: registered new device driver usb <6>[ 0.537812] i2c i2c-0: IMX I2C adapter registered <6>[ 0.543826] i2c i2c-1: IMX I2C adapter registered <6>[ 0.550606] i2c i2c-2: IMX I2C adapter registered <6>[ 0.557525] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.562838] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.572394] PTP clock support registered <6>[ 0.577042] EDAC MC: Ver: 3.0.0 <6>[ 0.581887] scmi_core: SCMI protocol bus registered <6>[ 0.589917] FPGA manager framework <6>[ 0.594026] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.602054] NET: Registered PF_ATMPVC protocol family <6>[ 0.607427] NET: Registered PF_ATMSVC protocol family <6>[ 0.613491] vgaarb: loaded <6>[ 0.617316] clocksource: Switched to clocksource arch_sys_counter <5>[ 0.625069] VFS: Disk quotas dquot_6.6.0 <6>[ 0.629351] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 0.637814] pnp: PnP ACPI: disabled <6>[ 0.656527] NET: Registered PF_INET protocol family <6>[ 0.661896] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.672992] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) <6>[ 0.681957] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.690093] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) <6>[ 0.698456] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) <6>[ 0.706809] TCP: Hash tables configured (established 32768 bind 32768) <6>[ 0.714114] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear) <6>[ 0.722013] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) <6>[ 0.729082] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) <6>[ 0.736908] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.746938] RPC: Registered named UNIX socket transport module. <6>[ 0.753211] RPC: Registered udp transport module. <6>[ 0.758228] RPC: Registered tcp transport module. <6>[ 0.763243] RPC: Registered tcp-with-tls transport module. <6>[ 0.769048] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.775837] NET: Registered PF_XDP protocol family <6>[ 0.780954] PCI: CLS 0 bytes, default 64 <6>[ 0.785634] Unpacking initramfs... <6>[ 0.811070] kvm [1]: nv: 557 coarse grained trap handlers <6>[ 0.823884] kvm [1]: IPA Size Limit: 44 bits <6>[ 0.834945] kvm [1]: GICv3: no GICV resource entry <6>[ 0.847318] kvm [1]: disabling GICv2 emulation <6>[ 0.856354] kvm [1]: GIC system register CPU interface enabled <6>[ 0.869357] kvm [1]: vgic interrupt IRQ9 <6>[ 0.877366] kvm [1]: Hyp nVHE mode initialized successfully <5>[ 0.895534] Initialise system trusted keyrings <6>[ 0.906431] workingset: timestamp_bits=42 max_order=20 bucket_order=0 <6>[ 0.938466] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 0.955243] NFS: Registering the id_resolver key type <5>[ 0.966560] Key type id_resolver registered <5>[ 0.977369] Key type id_legacy registered <6>[ 0.984910] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.991976] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 1.000122] 9p: Installing v9fs 9p2000 file system support <6>[ 1.035693] NET: Registered PF_ALG protocol family <5>[ 1.040877] Key type asymmetric registered <5>[ 1.045341] Asymmetric key parser 'x509' registered <6>[ 1.050793] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) <6>[ 1.058588] io scheduler mq-deadline registered <6>[ 1.063483] io scheduler kyber registered <6>[ 1.067916] io scheduler bfq registered <4>[ 1.072707] test_firmware: interface ready <6>[ 1.109517] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.118110] pci-host-generic 1f0000000.pcie: host bridge /soc/pcie@1f0000000 ranges: <6>[ 1.126358] pci-host-generic 1f0000000.pcie: MEM 0x01f8000000..0x01f815ffff -> 0x01f8000000 <6>[ 1.135620] pci-host-generic 1f0000000.pcie: MEM 0x01f8160000..0x01f81cffff -> 0x01f8160000 <6>[ 1.144884] pci-host-generic 1f0000000.pcie: MEM 0x01f81d0000..0x01f81effff -> 0x01f81d0000 <6>[ 1.154156] pci-host-generic 1f0000000.pcie: MEM 0x01f81f0000..0x01f820ffff -> 0x01f81f0000 <6>[ 1.163419] pci-host-generic 1f0000000.pcie: MEM 0x01f8210000..0x01f822ffff -> 0x01f8210000 <6>[ 1.172681] pci-host-generic 1f0000000.pcie: MEM 0x01f8230000..0x01f824ffff -> 0x01f8230000 <6>[ 1.181943] pci-host-generic 1f0000000.pcie: MEM 0x01fc000000..0x01fc3fffff -> 0x01fc000000 <6>[ 1.191324] pci-host-generic 1f0000000.pcie: ECAM at [mem 0x1f0000000-0x1f00fffff] for [bus 00] <6>[ 1.200865] pci-host-generic 1f0000000.pcie: PCI host bridge to bus 0000:00 <6>[ 1.208241] pci_bus 0000:00: root bus resource [bus 00] <6>[ 1.213841] pci_bus 0000:00: root bus resource [mem 0x1f8000000-0x1f815ffff] <6>[ 1.221291] pci_bus 0000:00: root bus resource [mem 0x1f8160000-0x1f81cffff pref] <6>[ 1.229175] pci_bus 0000:00: root bus resource [mem 0x1f81d0000-0x1f81effff] <6>[ 1.236617] pci_bus 0000:00: root bus resource [mem 0x1f81f0000-0x1f820ffff pref] <6>[ 1.244494] pci_bus 0000:00: root bus resource [mem 0x1f8210000-0x1f822ffff] <6>[ 1.251934] pci_bus 0000:00: root bus resource [mem 0x1f8230000-0x1f824ffff pref] <6>[ 1.259821] pci_bus 0000:00: root bus resource [mem 0x1fc000000-0x1fc3fffff] <6>[ 1.267409] pci 0000:00:00.0: [1957:e100] type 00 class 0x020001 PCIe Root Complex Integrated Endpoint <6>[ 1.277251] pci 0000:00:00.0: BAR 0 [mem 0x1f8000000-0x1f803ffff 64bit]: from Enhanced Allocation, properties 0x0 <6>[ 1.287955] pci 0000:00:00.0: BAR 2 [mem 0x1f8160000-0x1f816ffff 64bit pref]: from Enhanced Allocation, properties 0x1 <6>[ 1.299085] pci 0000:00:00.0: VF BAR 2 [mem 0x1f81d0000-0x1f81dffff 64bit]: from Enhanced Allocation, properties 0x4 <6>[ 1.310042] pci 0000:00:00.0: VF BAR 4 [mem 0x1f81f0000-0x1f81fffff 64bit pref]: from Enhanced Allocation, properties 0x3 <6>[ 1.321499] pci 0000:00:00.0: PME# supported from D0 D3hot <6>[ 1.327393] pci 0000:00:00.0: VF BAR 0 [mem 0x1f81d0000-0x1f81effff 64bit]: contains BAR 0 for 2 VFs <6>[ 1.336947] pci 0000:00:00.0: VF BAR 2 [mem 0x1f81f0000-0x1f820ffff 64bit pref]: contains BAR 2 for 2 VFs <6>[ 1.347663] pci 0000:00:00.1: [1957:e100] type 00 class 0x020001 PCIe Root Complex Integrated Endpoint <6>[ 1.357505] pci 0000:00:00.1: BAR 0 [mem 0x1f8040000-0x1f807ffff 64bit]: from Enhanced Allocation, properties 0x0 <6>[ 1.368210] pci 0000:00:00.1: BAR 2 [mem 0x1f8170000-0x1f817ffff 64bit pref]: from Enhanced Allocation, properties 0x1 <6>[ 1.379346] pci 0000:00:00.1: VF BAR 2 [mem 0x1f8210000-0x1f821ffff 64bit]: from Enhanced Allocation, properties 0x4 <6>[ 1.390302] pci 0000:00:00.1: VF BAR 4 [mem 0x1f8230000-0x1f823ffff 64bit pref]: from Enhanced Allocation, properties 0x3 <6>[ 1.401760] pci 0000:00:00.1: PME# supported from D0 D3hot <6>[ 1.407650] pci 0000:00:00.1: VF BAR 0 [mem 0x1f8210000-0x1f822ffff 64bit]: contains BAR 0 for 2 VFs <6>[ 1.417197] pci 0000:00:00.1: VF BAR 2 [mem 0x1f8230000-0x1f824ffff 64bit pref]: contains BAR 2 for 2 VFs <6>[ 1.427926] pci 0000:00:00.2: [1957:e100] type 00 class 0x020001 PCIe Root Complex Integrated Endpoint <6>[ 1.437772] pci 0000:00:00.2: BAR 0 [mem 0x1f8080000-0x1f80bffff 64bit]: from Enhanced Allocation, properties 0x0 <6>[ 1.448427] pci 0000:00:00.2: BAR 2 [mem 0x1f8180000-0x1f818ffff 64bit pref]: from Enhanced Allocation, properties 0x1 <6>[ 1.459596] pci 0000:00:00.2: PME# supported from D0 D3hot <6>[ 1.466105] pci 0000:00:00.3: [1957:ee01] type 00 class 0x088001 PCIe Root Complex Integrated Endpoint <6>[ 1.475953] pci 0000:00:00.3: BAR 0 [mem 0x1f8100000-0x1f811ffff 64bit]: from Enhanced Allocation, properties 0x0 <6>[ 1.486650] pci 0000:00:00.3: BAR 2 [mem 0x1f8190000-0x1f819ffff 64bit pref]: from Enhanced Allocation, properties 0x1 <6>[ 1.497849] pci 0000:00:00.3: PME# supported from D0 D3hot <6>[ 1.504342] pci 0000:00:00.4: [1957:ee02] type 00 class 0x088001 PCIe Root Complex Integrated Endpoint <6>[ 1.514153] pci 0000:00:00.4: BAR 0 [mem 0x1f8120000-0x1f813ffff 64bit]: from Enhanced Allocation, properties 0x0 <6>[ 1.524830] pci 0000:00:00.4: BAR 2 [mem 0x1f81a0000-0x1f81affff 64bit pref]: from Enhanced Allocation, properties 0x1 <6>[ 1.536025] pci 0000:00:00.4: PME# supported from D0 D3hot <6>[ 1.542697] pci 0000:00:00.5: [1957:eef0] type 00 class 0x020801 PCIe Root Complex Integrated Endpoint <6>[ 1.552525] pci 0000:00:00.5: BAR 0 [mem 0x1f8140000-0x1f815ffff 64bit]: from Enhanced Allocation, properties 0x0 <6>[ 1.563236] pci 0000:00:00.5: BAR 2 [mem 0x1f81b0000-0x1f81bffff 64bit pref]: from Enhanced Allocation, properties 0x1 <6>[ 1.574367] pci 0000:00:00.5: BAR 4 [mem 0x1fc000000-0x1fc3fffff 64bit]: from Enhanced Allocation, properties 0x0 <6>[ 1.585118] pci 0000:00:00.5: PME# supported from D0 D3hot <6>[ 1.591725] pci 0000:00:00.6: [1957:e100] type 00 class 0x020001 PCIe Root Complex Integrated Endpoint <6>[ 1.601544] pci 0000:00:00.6: BAR 0 [mem 0x1f80c0000-0x1f80fffff 64bit]: from Enhanced Allocation, properties 0x0 <6>[ 1.612222] pci 0000:00:00.6: BAR 2 [mem 0x1f81c0000-0x1f81cffff 64bit pref]: from Enhanced Allocation, properties 0x1 <6>[ 1.623431] pci 0000:00:00.6: PME# supported from D0 D3hot <6>[ 1.630769] pci 0000:00:1f.0: [1957:e001] type 00 class 0x080700 PCIe Root Complex Event Collector <6>[ 1.640350] OF: /soc/pcie@1f0000000: no msi-map translation for id 0xf8 on (null) <6>[ 1.648682] pci_bus 0000:00: resource 4 [mem 0x1f8000000-0x1f815ffff] <6>[ 1.655513] pci_bus 0000:00: resource 5 [mem 0x1f8160000-0x1f81cffff pref] <6>[ 1.662773] pci_bus 0000:00: resource 6 [mem 0x1f81d0000-0x1f81effff] <6>[ 1.669591] pci_bus 0000:00: resource 7 [mem 0x1f81f0000-0x1f820ffff pref] <6>[ 1.676846] pci_bus 0000:00: resource 8 [mem 0x1f8210000-0x1f822ffff] <6>[ 1.683658] pci_bus 0000:00: resource 9 [mem 0x1f8230000-0x1f824ffff pref] <6>[ 1.690902] pci_bus 0000:00: resource 10 [mem 0x1fc000000-0x1fc3fffff] <6>[ 1.805353] pci 0000:00:00.1: enabling device (0400 -> 0402) <6>[ 1.813278] pci 0000:00:00.1: enetc_fixup_clear_rss_rfs+0x0/0x70 took 112694 usecs <6>[ 1.926341] pci 0000:00:00.2: enabling device (0400 -> 0402) <4>[ 1.932958] pci 0000:00:00.2: CMD err 0001 for cmd 0000 <6>[ 1.938674] pci 0000:00:00.2: enetc_fixup_clear_rss_rfs+0x0/0x70 took 114601 usecs <6>[ 2.053357] pci 0000:00:00.6: enabling device (0400 -> 0402) <4>[ 2.059977] pci 0000:00:00.6: CMD err 0001 for cmd 0000 <6>[ 2.065698] pci 0000:00:00.6: enetc_fixup_clear_rss_rfs+0x0/0x70 took 116141 usecs <6>[ 2.073766] OF: /soc/pcie@1f0000000: no iommu-map translation for id 0xf8 on (null) <6>[ 2.082405] pcieport 0000:00:1f.0: PME: Signaling with IRQ 19 <6>[ 2.089221] pcieport 0000:00:1f.0: AER: enabled with IRQ 19 <6>[ 2.097684] layerscape-pcie 3400000.pcie: host bridge /soc/pcie@3400000 ranges: <6>[ 2.105471] layerscape-pcie 3400000.pcie: IO 0x8000010000..0x800001ffff -> 0x0000000000 <6>[ 2.114532] layerscape-pcie 3400000.pcie: MEM 0x8040000000..0x807fffffff -> 0x0040000000 <6>[ 2.123551] layerscape-pcie 3400000.pcie: iATU: unroll F, 8 ob, 6 ib, align 4K, limit 4G <6>[ 2.307034] Freeing initrd memory: 32996K <6>[ 3.093339] layerscape-pcie 3400000.pcie: Phy link never came up <6>[ 3.100034] layerscape-pcie 3400000.pcie: PCI host bridge to bus 0001:00 <6>[ 3.107088] pci_bus 0001:00: root bus resource [bus 00-ff] <6>[ 3.112904] pci_bus 0001:00: root bus resource [io 0x0000-0xffff] <6>[ 3.119421] pci_bus 0001:00: root bus resource [mem 0x8040000000-0x807fffffff] (bus address [0x40000000-0x7fffffff]) <6>[ 3.130377] pci 0001:00:00.0: [1957:82c1] type 01 class 0x060400 PCIe Root Port <6>[ 3.138078] pci 0001:00:00.0: PCI bridge to [bus 01-ff] <6>[ 3.143765] pci 0001:00:00.0: supports D1 D2 <6>[ 3.148346] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot <6>[ 3.156261] pci 0001:00:00.0: PCI bridge to [bus 01-ff] <6>[ 3.161835] pci_bus 0001:00: resource 4 [io 0x0000-0xffff] <6>[ 3.167733] pci_bus 0001:00: resource 5 [mem 0x8040000000-0x807fffffff] <6>[ 3.175095] layerscape-pcie 3500000.pcie: host bridge /soc/pcie@3500000 ranges: <6>[ 3.182841] layerscape-pcie 3500000.pcie: IO 0x8800010000..0x880001ffff -> 0x0000000000 <6>[ 3.191788] layerscape-pcie 3500000.pcie: MEM 0x8840000000..0x887fffffff -> 0x0040000000 <6>[ 3.200752] layerscape-pcie 3500000.pcie: iATU: unroll F, 8 ob, 6 ib, align 4K, limit 4G <6>[ 4.165334] layerscape-pcie 3500000.pcie: Phy link never came up <6>[ 4.171916] layerscape-pcie 3500000.pcie: PCI host bridge to bus 0002:00 <6>[ 4.178973] pci_bus 0002:00: root bus resource [bus 00-ff] <6>[ 4.184788] pci_bus 0002:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff]) <6>[ 4.194111] pci_bus 0002:00: root bus resource [mem 0x8840000000-0x887fffffff] (bus address [0x40000000-0x7fffffff]) <6>[ 4.205058] pci 0002:00:00.0: [1957:82c1] type 01 class 0x060400 PCIe Root Port <6>[ 4.212758] pci 0002:00:00.0: PCI bridge to [bus 01-ff] <6>[ 4.218444] pci 0002:00:00.0: supports D1 D2 <6>[ 4.223027] pci 0002:00:00.0: PME# supported from D0 D1 D2 D3hot <6>[ 4.230848] pci 0002:00:00.0: PCI bridge to [bus 01-ff] <6>[ 4.236414] pci_bus 0002:00: resource 4 [io 0x10000-0x1ffff] <6>[ 4.242487] pci_bus 0002:00: resource 5 [mem 0x8840000000-0x887fffffff] <6>[ 4.329737] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 4.343637] printk: legacy console [ttyS0] disabled <6>[ 4.349759] 21c0500.serial: ttyS0 at MMIO 0x21c0500 (irq = 20, base_baud = 12500000) is a 16550A <6>[ 4.358975] printk: legacy console [ttyS0] enabled <6>[ 4.358975] printk: legacy console [ttyS0] enabled <6>[ 4.369217] printk: legacy bootconsole [ns16550a0] disabled <6>[ 4.369217] printk: legacy bootconsole [ns16550a0] disabled <6>[ 4.386462] 21c0600.serial: ttyS1 at MMIO 0x21c0600 (irq = 20, base_baud = 12500000) is a 16550A <6>[ 4.398929] 2270000.serial: ttyLP2 at MMIO 0x2270000 (irq = 21, base_baud = 12500000) is a FSL_LPUART <6>[ 4.410604] msm_serial: driver initialized <6>[ 4.415873] SuperH (H)SCI(F) driver initialized <6>[ 4.420987] STM32 USART driver initialized <5>[ 4.440345] arm-smmu 5000000.iommu: probing hardware configuration... <5>[ 4.447142] arm-smmu 5000000.iommu: SMMUv2 with: <5>[ 4.452066] arm-smmu 5000000.iommu: stage 1 translation <5>[ 4.457679] arm-smmu 5000000.iommu: stage 2 translation <5>[ 4.463290] arm-smmu 5000000.iommu: nested translation <5>[ 4.468814] arm-smmu 5000000.iommu: coherent table walk <5>[ 4.474412] arm-smmu 5000000.iommu: (IDR0.CTTW overridden by FW configuration) <5>[ 4.482039] arm-smmu 5000000.iommu: stream matching with 128 register groups <5>[ 4.489498] arm-smmu 5000000.iommu: 64 context banks (0 stage-2 only) <5>[ 4.496347] arm-smmu 5000000.iommu: Supported page sizes: 0x61311000 <5>[ 4.503093] arm-smmu 5000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA <5>[ 4.509838] arm-smmu 5000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA <5>[ 4.517789] arm-smmu 5000000.iommu: preserved 0 boot mappings <4>[ 4.523981] arm-smmu 5000000.iommu: Failed to disable prefetcher for errata workarounds, check SACR.CACHE_LOCK <6>[ 4.549733] loop: module loaded <6>[ 4.553521] lkdtm: No crash points registered, enable through debugfs <6>[ 4.589198] megasas: 07.727.03.00-rc1 <5>[ 4.649171] 5 fixed-partitions partitions found on MTD device 20c0000.spi <5>[ 4.656303] Creating 5 MTD partitions on \"20c0000.spi\": <5>[ 4.661859] 0x000000000000-0x000000010000 : \"rcw\" <5>[ 4.669835] 0x000000010000-0x0000001e0000 : \"failsafe bootloader\" <5>[ 4.678837] 0x000000200000-0x000000210000 : \"configuration store\" <5>[ 4.687894] 0x000000210000-0x0000003e0000 : \"bootloader\" <5>[ 4.696002] 0x0000003e0000-0x000000400000 : \"bootloader environment\" <6>[ 4.721918] thunder_xcv, ver 1.0 <6>[ 4.725541] thunder_bgx, ver 1.0 <6>[ 4.729142] nicpf, ver 1.0 <6>[ 4.735180] fsl_enetc_mdio 0000:00:00.3: Adding to iommu group 0 <6>[ 4.845348] fsl_enetc_mdio 0000:00:00.3: enabling device (0400 -> 0402) <6>[ 4.877948] fsl_enetc_ptp 0000:00:00.4: Adding to iommu group 1 <6>[ 4.884549] fsl_enetc_ptp 0000:00:00.4: enabling device (0404 -> 0406) <4>[ 4.891862] ptp_qoriq: device tree node missing required elements, try automatic configuration <6>[ 4.901236] pps pps0: new PPS source ptp0 <6>[ 4.907299] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version <6>[ 4.914879] hns3: Copyright (c) 2017 Huawei Corporation. <6>[ 4.920620] hclge is initializing <6>[ 4.924331] e1000: Intel(R) PRO/1000 Network Driver <6>[ 4.929508] e1000: Copyright (c) 1999-2006 Intel Corporation. <6>[ 4.935662] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 4.940931] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 4.947261] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 4.952965] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 4.958940] igbvf: Intel(R) Gigabit Virtual Function Network Driver <6>[ 4.965504] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. <6>[ 4.972699] sky2: driver version 1.30 <6>[ 4.981434] VFIO - User Level meta-driver version: 0.3 <6>[ 4.988172] dwc3 3100000.usb: Adding to iommu group 2 <6>[ 4.995361] dwc3 3110000.usb: Adding to iommu group 3 <6>[ 5.011263] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller <6>[ 5.017104] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 <6>[ 5.025858] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000808002000010 <6>[ 5.035606] xhci-hcd xhci-hcd.0.auto: irq 98, io mem 0x03100000 <6>[ 5.042278] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller <6>[ 5.048071] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 <6>[ 5.056055] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed <6>[ 5.064383] hub 1-0:1.0: USB hub found <6>[ 5.068498] hub 1-0:1.0: 1 port detected <6>[ 5.073627] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. <6>[ 5.083341] hub 2-0:1.0: USB hub found <6>[ 5.087437] hub 2-0:1.0: 1 port detected <6>[ 5.092646] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller <6>[ 5.098483] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 <6>[ 5.107092] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000808002000010 <6>[ 5.116912] xhci-hcd xhci-hcd.1.auto: irq 99, io mem 0x03110000 <6>[ 5.123549] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller <6>[ 5.129339] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 <6>[ 5.137329] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed <6>[ 5.145455] hub 3-0:1.0: USB hub found <6>[ 5.149555] hub 3-0:1.0: 1 port detected <6>[ 5.154575] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. <6>[ 5.164162] hub 4-0:1.0: USB hub found <6>[ 5.168263] hub 4-0:1.0: 1 port detected <6>[ 5.174344] usbcore: registered new interface driver usb-storage <6>[ 5.189274] i2c_dev: i2c /dev entries driver <6>[ 5.207913] sp805-wdt c000000.watchdog: registration successful <6>[ 5.214799] sp805-wdt c010000.watchdog: registration successful <6>[ 5.228336] qoriq-cpufreq qoriq-cpufreq: Freescale QorIQ CPU frequency scaling driver <6>[ 5.239634] sdhci: Secure Digital Host Controller Interface driver <6>[ 5.246299] sdhci: Copyright(c) Pierre Ossman <6>[ 5.253001] Synopsys Designware Multimedia Card Interface Driver <6>[ 5.262017] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 5.269959] sdhci-esdhc 2140000.mmc: Adding to iommu group 4 <6>[ 5.276439] hid: raw HID events driver (C) Jiri Kosina <6>[ 5.276633] sdhci-esdhc 2150000.mmc: Adding to iommu group 5 <6>[ 5.284215] usbcore: registered new interface driver usbhid <6>[ 5.293918] usbhid: USB HID core driver <6>[ 5.311890] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 (0,8000003f) counters available <6>[ 5.323409] mmc1: SDHCI controller on 2140000.mmc [2140000.mmc] using ADMA <6>[ 5.333348] mmc0: SDHCI controller on 2150000.mmc [2150000.mmc] using ADMA <6>[ 5.348597] GACT probability on <6>[ 5.353454] ipip: IPv4 and MPLS over IPv4 tunneling driver <6>[ 5.360418] IPv4 over IPsec tunneling driver <6>[ 5.365912] IPsec XFRM device driver <6>[ 5.369977] NET: Registered PF_INET6 protocol family <6>[ 5.377824] Segment Routing with IPv6 <6>[ 5.381920] In-situ OAM (IOAM) with IPv6 <6>[ 5.387554] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 5.395944] NET: Registered PF_PACKET protocol family <6>[ 5.401451] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. <6>[ 5.414760] usb 3-1: new high-speed USB device number 2 using xhci-hcd <6>[ 5.417032] 9pnet: Installing 9P2000 support <5>[ 5.426706] Key type dns_resolver registered <6>[ 5.432969] NET: Registered PF_VSOCK protocol family <6>[ 5.438334] mpls_gso: MPLS GSO support <6>[ 5.444106] mmc0: new HS400 MMC card at address 0001 <6>[ 5.452794] mmcblk0: mmc0:0001 S0J56X 7.34 GiB <6>[ 5.462992] mmcblk0: p1 p2 <6>[ 5.468535] mmcblk0boot0: mmc0:0001 S0J56X 31.5 MiB <6>[ 5.479586] mmcblk0boot1: mmc0:0001 S0J56X 31.5 MiB <6>[ 5.489793] mmcblk0rpmb: mmc0:0001 S0J56X 4.00 MiB, chardev (509:0) <6>[ 5.492610] registered taskstats version 1 <5>[ 5.507293] Loading compiled-in X.509 certificates <5>[ 5.554399] Loaded X.509 cert 'Build time autogenerated kernel key: 5bdd050e553bf9bac901574f06752f9e4aa14490' <6>[ 5.592752] hub 3-1:1.0: USB hub found <6>[ 5.596955] hub 3-1:1.0: 7 ports detected <6>[ 5.601316] Demotion targets for Node 0: null <6>[ 5.606673] ima: No TPM chip found, activating TPM-bypass! <6>[ 5.612504] ima: Allocated hash algorithm: sha1 <6>[ 5.617391] ima: No architecture policies found <6>[ 5.635270] fsl-edma 22c0000.dma-controller: Adding to iommu group 6 <6>[ 5.647151] pcieport 0001:00:00.0: Adding to iommu group 7 <6>[ 5.653733] pcieport 0001:00:00.0: PME: Signaling with IRQ 104 <6>[ 5.661980] pcieport 0001:00:00.0: AER: enabled with IRQ 104 <3>[ 5.668439] genirq: Flags mismatch irq 104. 00002084 (PCIe bwctrl) vs. 00200084 (PCIe PME) <3>[ 5.677066] pcie_bwctrl 0001:00:00.0:pcie010: probe with driver pcie_bwctrl failed with error -16 <6>[ 5.686800] pcieport 0002:00:00.0: Adding to iommu group 8 <6>[ 5.693294] pcieport 0002:00:00.0: PME: Signaling with IRQ 105 <6>[ 5.699857] pcieport 0002:00:00.0: AER: enabled with IRQ 105 <3>[ 5.706250] genirq: Flags mismatch irq 105. 00002084 (PCIe bwctrl) vs. 00200084 (PCIe PME) <3>[ 5.714927] pcie_bwctrl 0002:00:00.0:pcie010: probe with driver pcie_bwctrl failed with error -16 <6>[ 5.728441] input: buttons0 as /devices/platform/buttons0/input/input0 <6>[ 25.737436] Waiting up to 100 more seconds for network. <6>[ 45.742433] Waiting up to 80 more seconds for network. <6>[ 65.747417] Waiting up to 60 more seconds for network. <4>[ 66.718551] pci 0000:00:00.0: deferred probe pending: pci: wait for supplier /soc/spi@20c0000/flash@0/otp-1/nvmem-layout/base-mac-address <6>[ 85.753435] Waiting up to 40 more seconds for network. <6>[ 105.758434] Waiting up to 20 more seconds for network. <5>[ 125.748440] Sending DHCP requests ...... timed out! <3>[ 199.462107] IP-Config: Reopening network devices... <6>[ 219.468418] Waiting up to 100 more seconds for network. <6>[ 239.473435] Waiting up to 80 more seconds for network. <6>[ 259.478418] Waiting up to 60 more seconds for network. <6>[ 279.483418] Waiting up to 40 more seconds for network.