Trying 0.0.0.0... Connected to 0. Escape character is '^]'. U-Boot SPL 2022.04-rc3-00001-gc3833acdc1 (Mar 01 2022 - 16:13:50 +0100) Trying to boot from SD card U-Boot 2022.04-rc3-00001-gc3833acdc1 (Mar 01 2022 - 16:13:50 +0100) CPU: Freescale i.MX8MQLite rev2.1 at 1000 MHz Reset cause: POR Model: Kontron pITX-imx8m DRAM: 4 GiB Core: 69 devices, 17 uclasses, devicetree: separate MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial@30880000 Out: serial@30880000 Err: serial@30880000 Net: eth0: ethernet@30be0000 Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp ethernet@30be0000 Waiting for PHY auto negotiation to complete..... done BOOTP broadcast 1 DHCP client bound to address 172.16.0.104 (3 ms) => setenv serverip 10.228.65.1 setenv serverip 10.228.65.1 => tftp 0x40480000 476760/tftp-deploy-4qq648sx/kernel/Image tftp 0x40480000 476760/tftp-deploy-4qq648sx/kernel/Image Using ethernet@30be0000 device TFTP from server 10.228.65.1; our IP address is 172.16.0.104; sending through gateway 172.16.0.254 Filename '476760/tftp-deploy-4qq648sx/kernel/Image'. Load address: 0x40480000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################### 14.5 MiB/s done Bytes transferred = 33704448 (2024a00 hex) => tftp 0x44000000 476760/tftp-deploy-4qq648sx/ramdisk/ramdisk.cpio.gz.uboot tftp 0x44000000 476760/tftp-deploy-4qq648sx/ramdisk/ramdisk.cpio.gz.uboot Using ethernet@30be0000 device TFTP from server 10.228.65.1; our IP address is 172.16.0.104; sending through gateway 172.16.0.254 Filename '476760/tftp-deploy-4qq648sx/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x44000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##### 14.6 MiB/s done Bytes transferred = 20099506 (132b1b2 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x43000000 476760/tftp-deploy-4qq648sx/dtb/imx8mq-kontron-pitx-imx8m.dtb tftp 0x43000000 476760/tftp-deploy-4qq648sx/dtb/imx8mq-kontron-pitx-imx8m.dtb Using ethernet@30be0000 device TFTP from server 10.228.65.1; our IP address is 172.16.0.104; sending through gateway 172.16.0.254 Filename '476760/tftp-deploy-4qq648sx/dtb/imx8mq-kontron-pitx-imx8m.dtb'. Load address: 0x43000000 Loading: *### 3.7 MiB/s done Bytes transferred = 35394 (8a42 hex) => setenv bootargs 'console=ttymxc2,115200n8 root=/dev/ram0 earlycon console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc2,115200n8 root=/dev/ram0 earlycon console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => booti 0x40480000 0x44000000 0x43000000 booti 0x40480000 0x44000000 0x43000000 Moving Image from 0x40480000 to 0x40600000, end=426b0000 ## Loading init Ramdisk from Legacy Image at 44000000 ... Image Name: Created: 2024-06-26 20:21:09 UTC Image Type: AArch64 Linux RAMDisk Image (uncompressed) Data Size: 20099442 Bytes = 19.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Ramdisk to 7e60d000, end 7f938172 ... OK Loading Device Tree to 000000007e601000, end 000000007e60ca41 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.15.161 (KernelCI@build-j246004-arm64-gcc-10-defconfig-cvnq2) (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT Wed Jun 26 20:05:18 UTC 2024 [ 0.000000] Machine model: Kontron pITX-imx8m [ 0.000000] efi: UEFI not found. [ 0.000000] earlycon: ec_imx6q0 at MMIO 0x0000000030880000 (options '115200n8') [ 0.000000] printk: bootconsole [ec_imx6q0] enabled [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x13f7cdc00-0x13f7cffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff] [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 20 pages/cpu s41560 r8192 d32168 u81920 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=ttymxc2,115200n8 root=/dev/ram0 earlycon console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) <6>[ 0.000000] Memory: 3961696K/4194304K available (15232K kernel code, 3090K rwdata, 8292K rodata, 6208K init, 497K bss, 199840K reserved, 32768K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. <6>[ 0.000000] Trampoline variant of Tasks RCU enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 <6>[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode <6>[ 0.000000] GICv3: 128 SPIs implemented <6>[ 0.000000] GICv3: 0 Extended SPIs implemented <6>[ 0.000000] GICv3: Distributor has no Range Selector support <6>[ 0.000000] Root IRQ handler: gic_handle_irq <6>[ 0.000000] GICv3: 16 PPIs implemented <6>[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000 <4>[ 0.000000] ITS: No ITS available, not enabling LPIs <6>[ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns <6>[ 0.000001] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns <6>[ 0.009745] Console: colour dummy device 80x25 <6>[ 0.013626] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000) <6>[ 0.024532] pid_max: default: 32768 minimum: 301 <6>[ 0.029676] LSM: Security Framework initializing <6>[ 0.034818] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.042713] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.052939] rcu: Hierarchical SRCU implementation. <6>[ 0.058510] EFI services will not be available. <6>[ 0.061628] smp: Bringing up secondary CPUs ... <6>[ 0.066921] Detected VIPT I-cache on CPU1 <6>[ 0.066961] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000 <6>[ 0.067006] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] <6>[ 0.067577] Detected VIPT I-cache on CPU2 <6>[ 0.067599] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000 <6>[ 0.067625] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] <6>[ 0.068142] Detected VIPT I-cache on CPU3 <6>[ 0.068166] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000 <6>[ 0.068191] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] <6>[ 0.068261] smp: Brought up 1 node, 4 CPUs <6>[ 0.127908] SMP: Total of 4 processors activated. <6>[ 0.133077] CPU features: detected: 32-bit EL0 Support <6>[ 0.138729] CPU features: detected: 32-bit EL1 Support <6>[ 0.144343] CPU features: detected: CRC32 instructions <6>[ 0.159770] CPU: All CPU(s) started at EL2 <6>[ 0.161368] alternatives: patching kernel code <6>[ 0.168786] devtmpfs: initialized <4>[ 0.175994] KASLR disabled due to lack of seed <6>[ 0.178127] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns <6>[ 0.188392] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.197262] pinctrl core: initialized pinctrl subsystem <6>[ 0.202658] DMI not present or invalid. <6>[ 0.206548] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.213741] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.220017] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.228425] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.236827] audit: initializing netlink subsys (disabled) <5>[ 0.242814] audit: type=2000 audit(0.148:1): state=initialized audit_enabled=0 res=1 <6>[ 0.244067] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.251056] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.257984] cpuidle: using governor menu <6>[ 0.269239] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. <6>[ 0.276481] ASID allocator initialised with 65536 entries <6>[ 0.284002] Serial: AMBA PL011 UART driver <6>[ 0.295818] imx8mq-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver <6>[ 0.327048] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.331372] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages <6>[ 0.338650] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.345895] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages <6>[ 0.354412] cryptd: max_cpu_qlen set to 1000 <6>[ 0.360373] ACPI: Interpreter disabled. <6>[ 0.364289] iommu: Default domain type: Translated <6>[ 0.367518] iommu: DMA domain TLB invalidation policy: strict mode <6>[ 0.374599] vgaarb: loaded <5>[ 0.377692] SCSI subsystem initialized <6>[ 0.381945] usbcore: registered new interface driver usbfs <6>[ 0.387627] usbcore: registered new interface driver hub <6>[ 0.393430] usbcore: registered new device driver usb <6>[ 0.399803] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.404391] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.414219] PTP clock support registered <6>[ 0.418691] EDAC MC: Ver: 3.0.0 <6>[ 0.423818] FPGA manager framework <6>[ 0.425998] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.433522] clocksource: Switched to clocksource arch_sys_counter <5>[ 0.439360] VFS: Disk quotas dquot_6.6.0 <6>[ 0.443588] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 0.451189] pnp: PnP ACPI: disabled <6>[ 0.461345] NET: Registered PF_INET protocol family <6>[ 0.463968] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.473725] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) <6>[ 0.480954] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.489269] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) <6>[ 0.498074] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) <6>[ 0.506409] TCP: Hash tables configured (established 32768 bind 32768) <6>[ 0.512892] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) <6>[ 0.520141] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) <6>[ 0.527968] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.534378] RPC: Registered named UNIX socket transport module. <6>[ 0.540408] RPC: Registered udp transport module. <6>[ 0.545598] RPC: Registered tcp transport module. <6>[ 0.550755] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.557754] PCI: CLS 0 bytes, default 64 <6>[ 0.562373] Unpacking initramfs... <6>[ 0.574032] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available <6>[ 0.580458] kvm [1]: IPA Size Limit: 40 bits <6>[ 0.586270] kvm [1]: vgic-v2@31020000 <6>[ 0.588712] kvm [1]: GIC system register CPU interface enabled <6>[ 0.595242] kvm [1]: vgic interrupt IRQ9 <6>[ 0.599635] kvm [1]: Hyp mode initialized successfully <5>[ 0.609632] Initialise system trusted keyrings <6>[ 0.611783] workingset: timestamp_bits=42 max_order=20 bucket_order=0 <6>[ 0.625998] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 0.630221] NFS: Registering the id_resolver key type <5>[ 0.634991] Key type id_resolver registered <5>[ 0.639580] Key type id_legacy registered <6>[ 0.644175] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.651304] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 0.659621] 9p: Installing v9fs 9p2000 file system support <5>[ 0.710451] Key type asymmetric registered <5>[ 0.712050] Asymmetric key parser 'x509' registered <6>[ 0.717578] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) <6>[ 0.725422] io scheduler mq-deadline registered <6>[ 0.730409] io scheduler kyber registered <6>[ 0.748655] EINJ: ACPI disabled. <6>[ 0.770778] SoC: i.MX8MQ revision 2.1 <6>[ 0.782306] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 0.789539] SuperH (H)SCI(F) driver initialized <6>[ 0.792312] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 37, base_baud = 5000000) is a IMX <3>[ 0.801731] clk: failed to reparent uart3 to sys1_pll_80m: -16 <6>[ 0.807622] 30880000.serial: ttymxc2 at MMIO 0x30880000 (irq = 38, base_baud = 1562500) is a IMX <6>[ 0.816908] printk: console [ttymxc2] enabled <6>[ 0.816908] printk: console [ttymxc2] enabled <6>[ 0.826449] printk: bootconsole [ec_imx6q0] disabled <6>[ 0.826449] printk: bootconsole [ec_imx6q0] disabled <6>[ 0.838177] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 39, base_baud = 5000000) is a IMX <6>[ 0.850792] msm_serial: driver initialized <6>[ 0.863541] loop: module loaded <6>[ 0.868435] megasas: 07.717.02.00-rc1 <6>[ 0.877036] spi-nor spi0.0: mx25l12805d (16384 Kbytes) <6>[ 1.684123] Freeing initrd memory: 19628K <6>[ 1.714735] tun: Universal TUN/TAP device driver, 1.6 <6>[ 1.721323] thunder_xcv, ver 1.0 <6>[ 1.725015] thunder_bgx, ver 1.0 <6>[ 1.728696] nicpf, ver 1.0 <6>[ 1.733470] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version <6>[ 1.741278] hns3: Copyright (c) 2017 Huawei Corporation. <6>[ 1.747141] hclge is initializing <6>[ 1.750893] e1000: Intel(R) PRO/1000 Network Driver <6>[ 1.756256] e1000: Copyright (c) 1999-2006 Intel Corporation. <6>[ 1.762560] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 1.768011] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.774500] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 1.780405] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.786523] igbvf: Intel(R) Gigabit Virtual Function Network Driver <6>[ 1.793333] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. <6>[ 1.800161] sky2: driver version 1.30 <6>[ 1.805598] VFIO - User Level meta-driver version: 0.3 <6>[ 1.813703] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 1.820787] ehci-pci: EHCI PCI platform driver <6>[ 1.825729] ehci-platform: EHCI generic platform driver <6>[ 1.831604] ehci-orion: EHCI orion driver <6>[ 1.836178] ehci-exynos: EHCI Exynos driver <6>[ 1.840918] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 1.847648] ohci-pci: OHCI PCI platform driver <6>[ 1.852588] ohci-platform: OHCI generic platform driver <6>[ 1.858443] ohci-exynos: OHCI Exynos driver <6>[ 1.863794] usbcore: registered new interface driver usb-storage <6>[ 1.873752] i2c_dev: i2c /dev entries driver <6>[ 1.886590] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.893317] sdhci: Copyright(c) Pierre Ossman <6>[ 1.899069] Synopsys Designware Multimedia Card Interface Driver <6>[ 1.906856] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.915236] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.923092] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... <6>[ 1.930828] usbcore: registered new interface driver usbhid <6>[ 1.936917] usbhid: USB HID core driver <6>[ 1.948000] NET: Registered PF_PACKET protocol family <6>[ 1.953714] 9pnet: Installing 9P2000 support <5>[ 1.958514] Key type dns_resolver registered <5>[ 1.963557] Loading compiled-in X.509 certificates <6>[ 1.992279] pfuze100-regulator 0-0008: Full layer: 2, Metal layer: 1 <6>[ 1.999548] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 <6>[ 2.005096] pfuze100-regulator 0-0008: pfuze100 found. <6>[ 2.021583] i2c i2c-0: IMX I2C adapter registered <6>[ 2.027439] i2c i2c-1: IMX I2C adapter registered <6>[ 2.033238] i2c i2c-2: IMX I2C adapter registered <4>[ 2.039367] imx8mq-usb-phy 381f0040.usb-phy: supply vbus not found, using dummy regulator <4>[ 2.048702] imx8mq-usb-phy 382f0040.usb-phy: supply vbus not found, using dummy regulator <6>[ 2.064966] pps pps0: new PPS source ptp0 <6>[ 2.093707] fec 30be0000.ethernet eth0: registered PHC device 0 <6>[ 2.105103] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller <6>[ 2.112267] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 <6>[ 2.120652] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x0000008000010010 <6>[ 2.130774] xhci-hcd xhci-hcd.0.auto: irq 56, io mem 0x38200000 <6>[ 2.137366] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller <6>[ 2.143371] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 <6>[ 2.151634] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed <6>[ 2.159312] hub 1-0:1.0: USB hub found <6>[ 2.163531] hub 1-0:1.0: 1 port detected <6>[ 2.168217] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. <6>[ 2.177379] hub 2-0:1.0: USB hub found <6>[ 2.181591] hub 2-0:1.0: 1 port detected <6>[ 2.192498] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO <6>[ 2.193188] imx6q-pcie 33800000.pcie: host bridge /soc@0/pcie@33800000 ranges: <6>[ 2.194395] imx6q-pcie 33c00000.pcie: host bridge /soc@0/pcie@33c00000 ranges: <6>[ 2.194413] imx6q-pcie 33c00000.pcie: No bus range found for /soc@0/pcie@33c00000, using [bus 00-ff] <6>[ 2.194452] imx6q-pcie 33c00000.pcie: IO 0x0027f80000..0x0027f8ffff -> 0x0000000000 <6>[ 2.194474] imx6q-pcie 33c00000.pcie: MEM 0x0020000000..0x0027efffff -> 0x0020000000 <6>[ 2.195163] imx6q-pcie 33c00000.pcie: iATU unroll: enabled <6>[ 2.195170] imx6q-pcie 33c00000.pcie: Detected iATU regions: 4 outbound, 4 inbound <6>[ 2.198126] sdhci-esdhc-imx 30b50000.mmc: Got WP GPIO <6>[ 2.205916] imx6q-pcie 33800000.pcie: IO 0x001ff80000..0x001ff8ffff -> 0x0000000000 <6>[ 2.216849] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA <6>[ 2.223677] imx6q-pcie 33800000.pcie: MEM 0x0018000000..0x001fefffff -> 0x0018000000 <6>[ 2.248906] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA <6>[ 2.289548] imx6q-pcie 33c00000.pcie: Link up <6>[ 2.298597] imx6q-pcie 33c00000.pcie: Link: Gen2 disabled <6>[ 2.304504] imx6q-pcie 33c00000.pcie: Link up, Gen1 <6>[ 2.309868] imx6q-pcie 33c00000.pcie: Link up <6>[ 2.314801] imx6q-pcie 33c00000.pcie: PCI host bridge to bus 0001:00 <6>[ 2.321709] pci_bus 0001:00: root bus resource [bus 00-ff] <6>[ 2.327711] pci_bus 0001:00: root bus resource [io 0x0000-0xffff] <6>[ 2.334432] pci_bus 0001:00: root bus resource [mem 0x20000000-0x27efffff] <6>[ 2.341909] pci 0001:00:00.0: [16c3:abcd] type 01 class 0x060400 <6>[ 2.348461] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff] <6>[ 2.354951] mmc0: new HS400 MMC card at address 0001 <6>[ 2.355287] pci 0001:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] <6>[ 2.361348] mmcblk0: mmc0:0001 S0J56X 14.8 GiB <6>[ 2.368011] pci 0001:00:00.0: supports D1 <6>[ 2.374767] mmcblk0: p1 p2 <6>[ 2.377418] pci 0001:00:00.0: PME# supported from D0 D1 D3hot D3cold <6>[ 2.381175] mmcblk0boot0: mmc0:0001 S0J56X 31.5 MiB <6>[ 2.389570] pci 0001:01:00.0: [8086:1539] type 00 class 0x020000 <6>[ 2.394258] mmcblk0boot1: mmc0:0001 S0J56X 31.5 MiB <6>[ 2.399531] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x0001ffff] <6>[ 2.406034] mmcblk0rpmb: mmc0:0001 S0J56X 4.00 MiB, chardev (234:0) <6>[ 2.411771] pci 0001:01:00.0: reg 0x18: [io 0x0000-0x001f] <6>[ 2.424638] pci 0001:01:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] <6>[ 2.429543] usb 1-1: new high-speed USB device number 2 using xhci-hcd <6>[ 2.431782] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold <6>[ 2.455173] pci 0001:00:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff] <6>[ 2.462540] pci 0001:00:00.0: BAR 14: assigned [mem 0x20100000-0x201fffff] <6>[ 2.469988] pci 0001:00:00.0: BAR 6: assigned [mem 0x20200000-0x2020ffff pref] <6>[ 2.477550] imx6q-pcie 33800000.pcie: iATU unroll: enabled <6>[ 2.477800] pci 0001:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] <6>[ 2.483782] imx6q-pcie 33800000.pcie: Detected iATU regions: 4 outbound, 4 inbound <6>[ 2.490496] pci 0001:01:00.0: BAR 0: assigned [mem 0x20100000-0x2011ffff] <6>[ 2.506012] pci 0001:01:00.0: BAR 3: assigned [mem 0x20120000-0x20123fff] <6>[ 2.513376] pci 0001:01:00.0: BAR 2: assigned [io 0x1000-0x101f] <6>[ 2.520017] pci 0001:00:00.0: PCI bridge to [bus 01-ff] <6>[ 2.525745] pci 0001:00:00.0: bridge window [io 0x1000-0x1fff] <6>[ 2.532377] pci 0001:00:00.0: bridge window [mem 0x20100000-0x201fffff] <6>[ 2.540132] pcieport 0001:00:00.0: PME: Signaling with IRQ 223 <6>[ 2.546803] igb 0001:01:00.0: enabling device (0000 -> 0002) <6>[ 2.547473] mmc1: new ultra high speed SDR104 SDHC card at address aaaa <6>[ 2.560622] mmcblk1: mmc1:aaaa SK32G 29.7 GiB <6>[ 2.567926] mmcblk1: p1 p2 p3 <6>[ 2.582545] pps pps1: new PPS source ptp1 <6>[ 2.587143] igb 0001:01:00.0: added PHC on eth1 <6>[ 2.592168] igb 0001:01:00.0: Intel(R) Gigabit Ethernet Network Connection <6>[ 2.599612] igb 0001:01:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:e0:4b:71:23:3c <6>[ 2.607332] igb 0001:01:00.0: eth1: PBA No: FFFFFF-0FF <6>[ 2.612966] igb 0001:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) <6>[ 2.625596] hub 1-1:1.0: USB hub found <6>[ 2.629845] hub 1-1:1.0: 4 ports detected <6>[ 2.713569] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd <6>[ 2.758897] hub 2-1:1.0: USB hub found <6>[ 2.763132] hub 2-1:1.0: 4 ports detected <6>[ 3.498849] imx6q-pcie 33800000.pcie: Phy link never came up <6>[ 4.505159] imx6q-pcie 33800000.pcie: Phy link never came up <6>[ 4.511350] imx6q-pcie 33800000.pcie: Link up, Gen1 <6>[ 5.516829] imx6q-pcie 33800000.pcie: Phy link never came up <6>[ 5.523156] imx6q-pcie 33800000.pcie: PCI host bridge to bus 0000:00 <6>[ 5.530064] pci_bus 0000:00: root bus resource [bus 00-ff] <6>[ 5.536067] pci_bus 0000:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff]) <6>[ 5.545683] pci_bus 0000:00: root bus resource [mem 0x18000000-0x1fefffff] <6>[ 5.553159] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400 <6>[ 5.559713] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff] <6>[ 5.566532] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] <6>[ 5.573840] pci 0000:00:00.0: supports D1 <6>[ 5.578301] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold <6>[ 5.588747] pci 0000:00:00.0: BAR 0: assigned [mem 0x18000000-0x180fffff] <6>[ 5.596111] pci 0000:00:00.0: BAR 6: assigned [mem 0x18100000-0x1810ffff pref] <6>[ 5.603923] pci 0000:00:00.0: PCI bridge to [bus 01-ff] <6>[ 5.609995] pcieport 0000:00:00.0: PME: Signaling with IRQ 230 <6>[ 5.625893] Generic PHY 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) <6>[ 9.718696] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx <5>[ 9.745533] Sending DHCP requests ., OK <6>[ 9.765846] IP-Config: Got DHCP answer from 172.16.0.254, my address is 172.16.0.104 <6>[ 9.774206] IP-Config: Complete: <6>[ 9.777848] device=eth0, hwaddr=00:e0:4b:71:23:3b, ipaddr=172.16.0.104, mask=255.255.255.0, gw=172.16.0.254 <6>[ 9.788731] host=172.16.0.104, domain=lava.lan, nis-domain=(none) <6>[ 9.795812] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= <6>[ 9.795820] nameserver0=8.8.8.8 <6>[ 9.836125] clk: Disabling unused clocks <6>[ 9.841084] ALSA device list: <6>[ 9.844461] No soundcards found. <6>[ 9.850266] Freeing unused kernel memory: 6208K <6>[ 9.855369] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 9.919169] udevd[161]: starting version 3.2.9 <5>[ 9.924990] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 9.932164] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 9.939200] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 9.951207] udevd[161]: specified user 'tss' unknown <27>[ 9.956906] udevd[161]: specified group 'tss' unknown <30>[ 9.963978] udevd[162]: starting eudev-3.2.9 <6>[ 10.356817] caam 30900000.crypto: Entropy delay = 3200 <6>[ 10.367666] mc: Linux media interface: v0.10 <3>[ 10.368198] imx8m-ddrc-devfreq 3d400000.memory-controller: failed to init firmware freq info: -19 <6>[ 10.383187] etnaviv etnaviv: bound 38000000.gpu (ops gpu_ops [etnaviv]) <6>[ 10.391541] etnaviv-gpu 38000000.gpu: model: GC7000, revision: 6214 <6>[ 10.399049] [drm] Initialized etnaviv 1.4.0 20151214 for etnaviv on minor 0 <6>[ 10.408978] videodev: Linux video capture interface: v2.00 <6>[ 10.417894] caam 30900000.crypto: Entropy delay = 3600 <4>[ 10.436534] imx-sdma 302c0000.sdma: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2 <4>[ 10.446841] imx-sdma 302c0000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin <4>[ 10.464808] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned. <6>[ 10.486030] hantro-vpu 38300000.video-codec: registered nxp,imx8mq-vpu-dec as /dev/video0 <6>[ 10.494322] caam 30900000.crypto: Instantiated RNG4 SH0 <0>[ 10.513648] Internal error: synchronous external abort: 0000000096000210 [#1] PREEMPT SMP <4>[ 10.522467] Modules linked in: hantro_vpu(C+) v4l2_h264 v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videobuf2_common imx_sdma qoriq_thermal videodev imx8m_ddrc mc caam(+) error etnaviv gpu_sched spi_imx drm governor_userspace imx_bus spi_bitbang crct10dif_ce imx_cpufreq_dt <4>[ 10.551619] CPU: 2 PID: 182 Comm: udevd Tainted: G C 5.15.161 #1 <4>[ 10.559511] Hardware name: Kontron pITX-imx8m (DT) <4>[ 10.564776] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) <4>[ 10.572306] pc : imx8m_soft_reset+0x1c/0x80 [hantro_vpu] <4>[ 10.578161] lr : imx8mq_runtime_resume+0x80/0x130 [hantro_vpu] <4>[ 10.584540] sp : ffff80000a543500 <4>[ 10.588265] x29: ffff80000a543500 x28: 0000000000000100 x27: 0000000000000000 <4>[ 10.595981] x26: ffff0000c00c7d38 x25: 000000026982951d x24: 0000000000000001 <6>[ 10.599064] caam 30900000.crypto: Instantiated RNG4 SH1 <4>[ 10.603697] x23: ffff0000c7d25a80 x22: ffff0000c6333e80 x21: 0000000000000003 <4>[ 10.603710] x20: ffff0000c6876080 x19: 0000000000000003 x18: 00000000fffffffb <4>[ 10.624833] x17: ffff8000f5f3d000 x16: ffff80000a0b8000 x15: 64656d3d4d455453 <4>[ 10.632550] x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000040 <4>[ 10.640266] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 <4>[ 10.647981] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 00000000000000c0 <4>[ 10.655697] x5 : 0000000000000000 x4 : 0000000000000003 x3 : 0000000000000000 <4>[ 10.663412] x2 : 0000000000000000 x1 : 0000000000000003 x0 : ffff80000b210000 <4>[ 10.671128] Call trace: <4>[ 10.673950] imx8m_soft_reset+0x1c/0x80 [hantro_vpu] <4>[ 10.679428] imx8mq_runtime_resume+0x80/0x130 [hantro_vpu] <4>[ 10.685443] hantro_runtime_resume+0x20/0x34 [hantro_vpu] <4>[ 10.691367] pm_generic_runtime_resume+0x2c/0x4c <4>[ 10.696461] __genpd_runtime_resume+0x30/0xb0 <4>[ 10.701276] genpd_runtime_resume+0x90/0x26c <4>[ 10.706003] __rpm_callback+0x48/0x1a0 <4>[ 10.710185] rpm_callback+0x6c/0x80 <4>[ 10.714095] rpm_resume+0x38c/0x650 <4>[ 10.718007] __pm_runtime_resume+0x3c/0x9c <4>[ 10.722552] __device_attach+0x90/0x1c0 <4>[ 10.726827] device_initial_probe+0x14/0x20 <4>[ 10.731463] bus_probe_device+0x9c/0xa4 <4>[ 10.735735] device_add+0x3b0/0x8a0 <4>[ 10.739648] cdev_device_add+0x50/0xb0 <4>[ 10.743833] media_devnode_register+0x14c/0x204 [mc] <4>[ 10.749309] __media_device_register+0x70/0xec [mc] <4>[ 10.754695] hantro_probe+0x320/0x620 [hantro_vpu] <4>[ 10.760012] platform_probe+0x68/0xe0 <4>[ 10.764109] really_probe.part.0+0x9c/0x31c <4>[ 10.768746] __driver_probe_device+0x98/0x170 <4>[ 10.773564] driver_probe_device+0xe8/0x180 <4>[ 10.778201] __driver_attach+0x94/0x190 <4>[ 10.782476] bus_for_each_dev+0x70/0xd0 <4>[ 10.786749] driver_attach+0x24/0x30 <4>[ 10.790751] bus_add_driver+0x108/0x1fc <4>[ 10.795023] driver_register+0x78/0x130 <4>[ 10.799299] __platform_driver_register+0x28/0x34 <4>[ 10.804474] hantro_driver_init+0x24/0x1000 [hantro_vpu] <4>[ 10.810316] do_one_initcall+0x50/0x1c0 <4>[ 10.814590] do_init_module+0x44/0x234 <4>[ 10.818771] load_module+0x1fd4/0x27b4 <4>[ 10.822952] __do_sys_finit_module+0xb8/0xfc <4>[ 10.827676] __arm64_sys_finit_module+0x20/0x30 <4>[ 10.832673] invoke_syscall+0x48/0x120 <4>[ 10.836856] el0_svc_common.constprop.0+0x44/0xf0 <4>[ 10.842035] do_el0_svc+0x24/0xa0 <4>[ 10.845764] el0_svc+0x20/0x60 <4>[ 10.849227] el0t_64_sync_handler+0xb0/0xb4 <4>[ 10.853864] el0t_64_sync+0x1a0/0x1a4 <0>[ 10.857960] Code: a90153f3 aa0003f4 2a0103f3 f941ac00 (b9400000) <4>[ 10.864584] ---[ end trace 488b00cc95a5f807 ]--- <6>[ 10.871411] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc0 <4>[ 10.873126] rtc-rv8803 0-0032: Voltage low, temperature compensation stopped. <6>[ 10.878203] snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0) <4>[ 10.886005] rtc-rv8803 0-0032: Voltage low, data loss detected. <4>[ 10.896207] at24 0-0051: supply vcc not found, using dummy regulator <6>[ 10.896544] input: 30370000.snvs:snvs-powerkey as /devices/platform/soc@0/30000000.bus/30370000.snvs/30370000.snvs:snvs-powerkey/input/input0 <6>[ 10.902416] caam 30900000.crypto: device ID = 0x0a16040100000000 (Era 9) <4>[ 10.902852] rtc-rv8803 0-0032: Voltage low, data is invalid. <28>[ 10.916800] udevd[162]: worker [182] terminated by signal 11 (Segmentation fault) <6>[ 10.922717] rtc-rv8803 0-0032: registered as rtc1 <27>[ 10.930432] udevd[162]: worker [182] failed while handling '/devices/platform/soc@0/38300000.video-codec' <6>[ 10.933117] at24 0-0051: 4096 byte 24c32 EEPROM, writable, 32 bytes/write <6>[ 10.948400] caam 30900000.crypto: job rings = 3, qi = 0 <6>[ 40.053571] V_1V5_CSI: disabling udevadm settle failed done Saving random seed: <5>[ 40.170359] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: <5>[ 40.219367] random: dropbear: uninitialized urandom read (32 bytes read) <6>[ 40.261104] NET: Registered PF_INET6 protocol family <6>[ 40.267816] Segment Routing with IPv6 <6>[ 40.271970] In-situ OAM (IOAM) with IPv6 OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-476760/environment . /lava-476760/environment / # /lava-476760/bin/lava-test-runner /lava-476760/0 /lava-476760/bin/lava-test-runner /lava-476760/0 + export 'TESTRUN_ID=0_dmesg' + cd /la<8>[ 40.860154] va-476760/0/tests/0_dmesg + cat uuid + UUID=476760_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 40.887521] <8>[ 40.915092] kern :emerg : Internal error: synchronous external abort: 0000000096000210 [#1] PREEMPT SMP k<8>[ 40.943057] ern :emerg : Code: a90153f3 aa00<8>[ 40.955556] 03f4 2a0103f3 f941ac00 (b9400000) + set +x / #