Trying 0.0.0.0... Connected to 0. Escape character is '^]'. U-Boot SPL 2021.10 (Oct 25 2021 - 13:39:59 +0200) Trying to boot from SPI U-Boot 2021.10 (Oct 25 2021 - 13:39:59 +0200) SoC: LS1028A Rev1.0 (0x870b0110) Clock Configuration: CPU0(A72):1300 MHz CPU1(A72):1300 MHz Bus: 400 MHz DDR: 1600 MT/s Reset Configuration Word (RCW): 00000000: 34004010 00000030 00000000 00000000 00000010: 00000000 008f0000 0030c000 00000000 00000020: 06200000 00002580 00000000 00019016 00000030: 00000000 00000048 00000000 00000000 00000040: 00000000 00000000 00000000 00000000 00000050: 00000000 00000000 00000000 00000000 00000060: 00000304 00000000 000e7000 00000000 00000070: bb580000 00020000 Model: Kontron SMARC-sAL28 (Dual PHY) EL: 3 DRAM: 4 GiB DDR 4 GiB (DDR3, 32-bit, CL=11, ECC on) SEC0: RNG instantiated CPU: 2 cores online Using SERDES1 Protocol: 47960 (0xbb58) MMC: FSL_SDHC: 1, FSL_SDHC: 0 Loading Environment from SPIFlash... SF: Detected w25q32dw with page size 256 Bytes, erase size 64 KiB, total 4 MiB OK PCIe1: pcie@3400000 Root Complex: no link PCIe2: pcie@3500000 Root Complex: no link In: serial@21c0500 Out: serial@21c0500 Err: serial@21c0500 Net: eth0: enetc-0, eth1: enetc-1 Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffffffffffff setenv initrd_high 0xffffffffffffffff => setenv fdt_high 0xffffffffffffffff setenv fdt_high 0xffffffffffffffff => dhcp dhcp enetc-0 Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 172.16.0.80 (254 ms) => setenv serverip 10.228.65.1 setenv serverip 10.228.65.1 => tftp 0x82000000 510460/tftp-deploy-j1xgmxyg/kernel/Image tftp 0x82000000 510460/tftp-deploy-j1xgmxyg/kernel/Image Using enetc-0 device TFTP from server 10.228.65.1; our IP address is 172.16.0.80; sending through gateway 172.16.0.254 Filename '510460/tftp-deploy-j1xgmxyg/kernel/Image'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 5.8 MiB/s done Bytes transferred = 37880320 (2420200 hex) => tftp 0x90080000 510460/tftp-deploy-j1xgmxyg/ramdisk/ramdisk.cpio.gz.uboot tftp 0x90080000 510460/tftp-deploy-j1xgmxyg/ramdisk/ramdisk.cpio.gz.uboot Using enetc-0 device TFTP from server 10.228.65.1; our IP address is 172.16.0.80; sending through gateway 172.16.0.254 Filename '510460/tftp-deploy-j1xgmxyg/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x90080000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###### 17.1 MiB/s done Bytes transferred = 26802438 (198f906 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x90000000 510460/tftp-deploy-j1xgmxyg/dtb/fsl-ls1028a-kontron-kbox-a-230-ls.dtb tftp 0x90000000 510460/tftp-deploy-j1xgmxyg/dtb/fsl-ls1028a-kontron-kbox-a-230-ls.dtb Using enetc-0 device TFTP from server 10.228.65.1; our IP address is 172.16.0.80; sending through gateway 172.16.0.254 Filename '510460/tftp-deploy-j1xgmxyg/dtb/fsl-ls1028a-kontron-kbox-a-230-ls.dtb'. Load address: 0x90000000 Loading: *### 7.1 MiB/s done Bytes transferred = 29585 (7391 hex) => setenv bootargs 'console=ttyS0,115200n8 earlycon n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyS0,115200n8 earlycon n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => booti 0x82000000 0x90080000 0x90000000 booti 0x82000000 0x90080000 0x90000000 ## Loading init Ramdisk from Legacy Image at 90080000 ... Image Name: Created: 2024-11-02 3:56:30 UTC Image Type: AArch64 Linux RAMDisk Image (uncompressed) Data Size: 26802374 Bytes = 25.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 90000000 Booting using the fdt blob at 0x90000000 Using Device Tree in place at 0000000090000000, end 000000009000a390 WARNING could not find node fsl,ls1028a-gpu: FDT_ERR_NOTFOUND. Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 6.12.0-rc5 (KernelCI@build-j359610-arm64-clang-17-defconfig-config-randomize-baxbk5z) (Debian clang version 17.0.6 (++20231208085813+6009708b4367-1~exp1~20231208085906.81), Debian LLD 17.0.6) #1 SMP PREEMPT Sat Nov 2 03:30:53 UTC 2024 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: Kontron KBox A-230-LS [ 0.000000] efi: UEFI not found. [ 0.000000] earlycon: ns16550a0 at MMIO 0x00000000021c0500 (options '115200n8') [ 0.000000] printk: legacy bootconsole [ns16550a0] enabled [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000020ffffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x20ff7dd980-0x20ff7e00bf] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000020ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000002080000000-0x00000020ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000020ffffffff] [ 0.000000] cma: Reserved 32 MiB at 0x00000000fcc00000 on node -1 [ 0.000000] percpu: Embedded 25 pages/cpu s61528 r8192 d32680 u102400 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: console=ttyS0,115200n8 earlycon n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <5>[ 0.000000] Unknown kernel command line parameters \"n8\", will be passed to user space. <6>[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 0.000000] Fallback order for Node 0: 0 <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576 <6>[ 0.000000] Policy zone: Normal <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] software IO TLB: area num 2. <6>[ 0.000000] software IO TLB: mapped [mem 0x00000000f8c00000-0x00000000fcc00000] (64MB) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. <6>[ 0.000000] Trampoline variant of Tasks RCU enabled. <6>[ 0.000000] Tracing variant of Tasks RCU enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. <6>[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. <6>[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 <6>[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode <6>[ 0.000000] GICv3: 256 SPIs implemented <6>[ 0.000000] GICv3: 0 Extended SPIs implemented <6>[ 0.000000] Root IRQ handler: gic_handle_irq <6>[ 0.000000] GICv3: GICv3 features: 16 PPIs <6>[ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0 <6>[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006040000 <6>[ 0.000000] ITS [mem 0x06020000-0x0603ffff] <6>[ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices @2080080000 (flat, esz 8, psz 64K, shr 0) <6>[ 0.000000] ITS: using cache flushing for cmd queue <6>[ 0.000000] GICv3: using LPI property table @0x0000002080040000 <6>[ 0.000000] GIC: using cache flushing for LPI property table <6>[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000002080050000 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns <6>[ 0.000000] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns <6>[ 0.008847] Console: colour dummy device 80x25 <6>[ 0.013645] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000) <6>[ 0.024366] pid_max: default: 32768 minimum: 301 <6>[ 0.029330] LSM: initializing lsm=capability <6>[ 0.033992] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.041740] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.062242] rcu: Hierarchical SRCU implementation. <6>[ 0.067356] rcu: Max phase no-delay instances is 1000. <6>[ 0.073041] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.081596] fsl-mc MSI: msi-controller@6020000 domain created <6>[ 0.088463] EFI services will not be available. <6>[ 0.093406] smp: Bringing up secondary CPUs ... <6>[ 0.098534] Detected PIPT I-cache on CPU1 <6>[ 0.098575] GICv3: CPU1: found redistributor 1 region 0:0x0000000006060000 <6>[ 0.098586] GICv3: CPU1: using allocated LPI pending table @0x0000002080060000 <6>[ 0.098611] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] <6>[ 0.098697] smp: Brought up 1 node, 2 CPUs <6>[ 0.129017] SMP: Total of 2 processors activated. <6>[ 0.134029] CPU: All CPU(s) started at EL2 <6>[ 0.138447] CPU features: detected: 32-bit EL0 Support <6>[ 0.143899] CPU features: detected: 32-bit EL1 Support <6>[ 0.149357] CPU features: detected: CRC32 instructions <6>[ 0.154833] alternatives: applying system-wide alternatives <6>[ 0.161708] Memory: 3945412K/4194304K available (17792K kernel code, 4928K rwdata, 11700K rodata, 2432K init, 743K bss, 211552K reserved, 32768K cma-reserved) <6>[ 0.176765] devtmpfs: initialized <6>[ 0.184145] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns <6>[ 0.194273] futex hash table entries: 512 (order: 3, 32768 bytes, linear) <6>[ 0.201836] 23312 pages in range for non-PLT usage <6>[ 0.201840] 514832 pages in range for PLT usage <6>[ 0.207055] pinctrl core: initialized pinctrl subsystem <6>[ 0.217941] Machine: Kontron KBox A-230-LS <6>[ 0.222341] SoC family: QorIQ LS1028A <6>[ 0.226294] SoC ID: svr:0x870b0110, Revision: 1.0 <6>[ 0.231679] DMI not present or invalid. <6>[ 0.237176] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.243942] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.251445] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.259557] audit: initializing netlink subsys (disabled) <5>[ 0.265397] audit: type=2000 audit(0.164:1): state=initialized audit_enabled=0 res=1 <6>[ 0.266083] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.273489] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.279865] cpuidle: using governor menu <6>[ 0.291080] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. <6>[ 0.298230] ASID allocator initialised with 65536 entries <6>[ 0.305202] Serial: AMBA PL011 UART driver <6>[ 0.322302] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.329433] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.336025] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages <6>[ 0.343142] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page <6>[ 0.349732] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.356848] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.363438] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages <6>[ 0.370555] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page <6>[ 0.378351] ACPI: Interpreter disabled. <6>[ 0.384081] iommu: Default domain type: Translated <6>[ 0.389179] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.395868] SCSI subsystem initialized <6>[ 0.400139] usbcore: registered new interface driver usbfs <6>[ 0.405963] usbcore: registered new interface driver hub <6>[ 0.411605] usbcore: registered new device driver usb <6>[ 0.417548] i2c i2c-0: IMX I2C adapter registered <6>[ 0.422827] i2c i2c-1: IMX I2C adapter registered <6>[ 0.428094] i2c i2c-2: IMX I2C adapter registered <6>[ 0.433487] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.438776] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.448283] PTP clock support registered <6>[ 0.452578] EDAC MC: Ver: 3.0.0 <6>[ 0.456273] scmi_core: SCMI protocol bus registered <6>[ 0.462010] FPGA manager framework <6>[ 0.465764] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.472759] vgaarb: loaded <6>[ 0.476010] clocksource: Switched to clocksource arch_sys_counter <5>[ 0.482588] VFS: Disk quotas dquot_6.6.0 <6>[ 0.486827] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 0.494174] pnp: PnP ACPI: disabled <6>[ 0.502559] NET: Registered PF_INET protocol family <6>[ 0.507933] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.517590] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) <6>[ 0.526518] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.534615] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) <6>[ 0.542966] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) <6>[ 0.551306] TCP: Hash tables configured (established 32768 bind 32768) <6>[ 0.558259] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) <6>[ 0.565331] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) <6>[ 0.572922] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.579238] RPC: Registered named UNIX socket transport module. <6>[ 0.585488] RPC: Registered udp transport module. <6>[ 0.590500] RPC: Registered tcp transport module. <6>[ 0.595511] RPC: Registered tcp-with-tls transport module. <6>[ 0.601317] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.608089] PCI: CLS 0 bytes, default 64 <6>[ 0.612441] Unpacking initramfs... <6>[ 0.618726] kvm [1]: nv: 554 coarse grained trap handlers <6>[ 0.624758] kvm [1]: IPA Size Limit: 44 bits <6>[ 0.630688] kvm [1]: GICv3: no GICV resource entry <6>[ 0.635817] kvm [1]: disabling GICv2 emulation <6>[ 0.640601] kvm [1]: GIC system register CPU interface enabled <6>[ 0.646780] kvm [1]: vgic interrupt IRQ9 <6>[ 0.651026] kvm [1]: Hyp nVHE mode initialized successfully <5>[ 0.657699] Initialise system trusted keyrings <6>[ 0.662609] workingset: timestamp_bits=42 max_order=20 bucket_order=0 <6>[ 0.669608] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 0.684035] NFS: Registering the id_resolver key type <5>[ 0.689448] Key type id_resolver registered <5>[ 0.693955] Key type id_legacy registered <6>[ 0.698298] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.705338] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 0.713214] 9p: Installing v9fs 9p2000 file system support <5>[ 0.743556] Key type asymmetric registered <5>[ 0.747974] Asymmetric key parser 'x509' registered <6>[ 0.753219] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) <6>[ 0.760959] io scheduler mq-deadline registered <6>[ 0.765803] io scheduler kyber registered <6>[ 0.770154] io scheduler bfq registered <6>[ 0.781621] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 0.788507] pci-host-generic 1f0000000.pcie: host bridge /soc/pcie@1f0000000 ranges: <6>[ 0.796634] pci-host-generic 1f0000000.pcie: MEM 0x01f8000000..0x01f815ffff -> 0x01f8000000 <6>[ 0.805799] pci-host-generic 1f0000000.pcie: MEM 0x01f8160000..0x01f81cffff -> 0x01f8160000 <6>[ 0.814960] pci-host-generic 1f0000000.pcie: MEM 0x01f81d0000..0x01f81effff -> 0x01f81d0000 <6>[ 0.824113] pci-host-generic 1f0000000.pcie: MEM 0x01f81f0000..0x01f820ffff -> 0x01f81f0000 <6>[ 0.833268] pci-host-generic 1f0000000.pcie: MEM 0x01f8210000..0x01f822ffff -> 0x01f8210000 <6>[ 0.842423] pci-host-generic 1f0000000.pcie: MEM 0x01f8230000..0x01f824ffff -> 0x01f8230000 <6>[ 0.851575] pci-host-generic 1f0000000.pcie: MEM 0x01fc000000..0x01fc3fffff -> 0x01fc000000 <6>[ 0.860791] pci-host-generic 1f0000000.pcie: ECAM at [mem 0x1f0000000-0x1f00fffff] for [bus 00] <6>[ 0.870058] pci-host-generic 1f0000000.pcie: PCI host bridge to bus 0000:00 <6>[ 0.877368] pci_bus 0000:00: root bus resource [bus 00] <6>[ 0.882915] pci_bus 0000:00: root bus resource [mem 0x1f8000000-0x1f815ffff] <6>[ 0.890303] pci_bus 0000:00: root bus resource [mem 0x1f8160000-0x1f81cffff pref] <6>[ 0.898141] pci_bus 0000:00: root bus resource [mem 0x1f81d0000-0x1f81effff] <6>[ 0.905537] pci_bus 0000:00: root bus resource [mem 0x1f81f0000-0x1f820ffff pref] <6>[ 0.913360] pci_bus 0000:00: root bus resource [mem 0x1f8210000-0x1f822ffff] <6>[ 0.920753] pci_bus 0000:00: root bus resource [mem 0x1f8230000-0x1f824ffff pref] <6>[ 0.928578] pci_bus 0000:00: root bus resource [mem 0x1fc000000-0x1fc3fffff] <6>[ 0.936023] pci 0000:00:00.0: [1957:e100] type 00 class 0x020001 PCIe Root Complex Integrated Endpoint <6>[ 0.945732] pci 0000:00:00.0: BAR 0 [mem 0x1f8000000-0x1f803ffff 64bit]: from Enhanced Allocation, properties 0x0 <6>[ 0.956372] pci 0000:00:00.0: BAR 2 [mem 0x1f8160000-0x1f816ffff 64bit pref]: from Enhanced Allocation, properties 0x1 <6>[ 0.967450] pci 0000:00:00.0: VF BAR 2 [mem 0x1f81d0000-0x1f81dffff 64bit]: from Enhanced Allocation, properties 0x4 <6>[ 0.978348] pci 0000:00:00.0: VF BAR 4 [mem 0x1f81f0000-0x1f81fffff 64bit pref]: from Enhanced Allocation, properties 0x3 <6>[ 0.989716] pci 0000:00:00.0: PME# supported from D0 D3hot <6>[ 0.995559] pci 0000:00:00.0: VF BAR 0 [mem 0x1f81d0000-0x1f81effff 64bit]: contains BAR 0 for 2 VFs <6>[ 1.005064] pci 0000:00:00.0: VF BAR 2 [mem 0x1f81f0000-0x1f820ffff 64bit pref]: contains BAR 2 for 2 VFs <6>[ 1.015227] pci 0000:00:00.1: [1957:e100] type 00 class 0x020001 PCIe Root Complex Integrated Endpoint <6>[ 1.024931] pci 0000:00:00.1: BAR 0 [mem 0x1f8040000-0x1f807ffff 64bit]: from Enhanced Allocation, properties 0x0 <6>[ 1.035569] pci 0000:00:00.1: BAR 2 [mem 0x1f8170000-0x1f817ffff 64bit pref]: from Enhanced Allocation, properties 0x1 <6>[ 1.046643] pci 0000:00:00.1: VF BAR 2 [mem 0x1f8210000-0x1f821ffff 64bit]: from Enhanced Allocation, properties 0x4 <6>[ 1.057549] pci 0000:00:00.1: VF BAR 4 [mem 0x1f8230000-0x1f823ffff 64bit pref]: from Enhanced Allocation, properties 0x3 <6>[ 1.068902] pci 0000:00:00.1: PME# supported from D0 D3hot <6>[ 1.074718] pci 0000:00:00.1: VF BAR 0 [mem 0x1f8210000-0x1f822ffff 64bit]: contains BAR 0 for 2 VFs <6>[ 1.084210] pci 0000:00:00.1: VF BAR 2 [mem 0x1f8230000-0x1f824ffff 64bit pref]: contains BAR 2 for 2 VFs <6>[ 1.094355] pci 0000:00:00.2: [1957:e100] type 00 class 0x020001 PCIe Root Complex Integrated Endpoint <6>[ 1.104057] pci 0000:00:00.2: BAR 0 [mem 0x1f8080000-0x1f80bffff 64bit]: from Enhanced Allocation, properties 0x0 <6>[ 1.114696] pci 0000:00:00.2: BAR 2 [mem 0x1f8180000-0x1f818ffff 64bit pref]: from Enhanced Allocation, properties 0x1 <6>[ 1.125808] pci 0000:00:00.2: PME# supported from D0 D3hot <6>[ 1.131819] pci 0000:00:00.3: [1957:ee01] type 00 class 0x088001 PCIe Root Complex Integrated Endpoint <6>[ 1.141520] pci 0000:00:00.3: BAR 0 [mem 0x1f8100000-0x1f811ffff 64bit]: from Enhanced Allocation, properties 0x0 <6>[ 1.152154] pci 0000:00:00.3: BAR 2 [mem 0x1f8190000-0x1f819ffff 64bit pref]: from Enhanced Allocation, properties 0x1 <6>[ 1.163242] pci 0000:00:00.3: PME# supported from D0 D3hot <6>[ 1.169246] pci 0000:00:00.4: [1957:ee02] type 00 class 0x088001 PCIe Root Complex Integrated Endpoint <6>[ 1.178946] pci 0000:00:00.4: BAR 0 [mem 0x1f8120000-0x1f813ffff 64bit]: from Enhanced Allocation, properties 0x0 <6>[ 1.189588] pci 0000:00:00.4: BAR 2 [mem 0x1f81a0000-0x1f81affff 64bit pref]: from Enhanced Allocation, properties 0x1 <6>[ 1.200676] pci 0000:00:00.4: PME# supported from D0 D3hot <6>[ 1.206702] pci 0000:00:00.5: [1957:eef0] type 00 class 0x020801 PCIe Root Complex Integrated Endpoint <6>[ 1.216403] pci 0000:00:00.5: BAR 0 [mem 0x1f8140000-0x1f815ffff 64bit]: from Enhanced Allocation, properties 0x0 <6>[ 1.227041] pci 0000:00:00.5: BAR 2 [mem 0x1f81b0000-0x1f81bffff 64bit pref]: from Enhanced Allocation, properties 0x1 <6>[ 1.238118] pci 0000:00:00.5: BAR 4 [mem 0x1fc000000-0x1fc3fffff 64bit]: from Enhanced Allocation, properties 0x0 <6>[ 1.248786] pci 0000:00:00.5: PME# supported from D0 D3hot <6>[ 1.254817] pci 0000:00:00.6: [1957:e100] type 00 class 0x020001 PCIe Root Complex Integrated Endpoint <6>[ 1.264519] pci 0000:00:00.6: BAR 0 [mem 0x1f80c0000-0x1f80fffff 64bit]: from Enhanced Allocation, properties 0x0 <6>[ 1.275158] pci 0000:00:00.6: BAR 2 [mem 0x1f81c0000-0x1f81cffff 64bit pref]: from Enhanced Allocation, properties 0x1 <6>[ 1.286249] pci 0000:00:00.6: PME# supported from D0 D3hot <6>[ 1.292973] pci 0000:00:1f.0: [1957:e001] type 00 class 0x080700 PCIe Root Complex Event Collector <6>[ 1.302350] OF: /soc/pcie@1f0000000: no msi-map translation for id 0xf8 on (null) <6>[ 1.310340] pci_bus 0000:00: resource 4 [mem 0x1f8000000-0x1f815ffff] <6>[ 1.317116] pci_bus 0000:00: resource 5 [mem 0x1f8160000-0x1f81cffff pref] <6>[ 1.324325] pci_bus 0000:00: resource 6 [mem 0x1f81d0000-0x1f81effff] <6>[ 1.331094] pci_bus 0000:00: resource 7 [mem 0x1f81f0000-0x1f820ffff pref] <6>[ 1.338305] pci_bus 0000:00: resource 8 [mem 0x1f8210000-0x1f822ffff] <6>[ 1.345078] pci_bus 0000:00: resource 9 [mem 0x1f8230000-0x1f824ffff pref] <6>[ 1.352286] pci_bus 0000:00: resource 10 [mem 0x1fc000000-0x1fc3fffff] <6>[ 1.359231] OF: /soc/pcie@1f0000000: no iommu-map translation for id 0xf8 on (null) <6>[ 1.367413] pcieport 0000:00:1f.0: PME: Signaling with IRQ 19 <6>[ 1.376052] pcieport 0000:00:1f.0: AER: enabled with IRQ 19 <6>[ 1.382693] layerscape-pcie 3400000.pcie: host bridge /soc/pcie@3400000 ranges: <6>[ 1.390394] layerscape-pcie 3400000.pcie: IO 0x8000010000..0x800001ffff -> 0x0000000000 <6>[ 1.399310] layerscape-pcie 3400000.pcie: MEM 0x8040000000..0x807fffffff -> 0x0040000000 <6>[ 1.408276] layerscape-pcie 3400000.pcie: iATU: unroll F, 8 ob, 6 ib, align 4K, limit 4G <6>[ 1.574374] Freeing initrd memory: 26168K <6>[ 2.376021] layerscape-pcie 3400000.pcie: Phy link never came up <6>[ 2.382467] layerscape-pcie 3400000.pcie: PCI host bridge to bus 0001:00 <6>[ 2.389506] pci_bus 0001:00: root bus resource [bus 00-ff] <6>[ 2.395311] pci_bus 0001:00: root bus resource [io 0x0000-0xffff] <6>[ 2.401817] pci_bus 0001:00: root bus resource [mem 0x8040000000-0x807fffffff] (bus address [0x40000000-0x7fffffff]) <6>[ 2.412732] pci 0001:00:00.0: [1957:82c1] type 01 class 0x060400 PCIe Root Port <6>[ 2.420396] pci 0001:00:00.0: PCI bridge to [bus 01-ff] <6>[ 2.425989] pci 0001:00:00.0: supports D1 D2 <6>[ 2.430564] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot <6>[ 2.437854] pci 0001:00:00.0: PCI bridge to [bus 01-ff] <6>[ 2.443408] pci_bus 0001:00: resource 4 [io 0x0000-0xffff] <6>[ 2.449300] pci_bus 0001:00: resource 5 [mem 0x8040000000-0x807fffffff] <6>[ 2.456382] layerscape-pcie 3500000.pcie: host bridge /soc/pcie@3500000 ranges: <6>[ 2.464059] layerscape-pcie 3500000.pcie: IO 0x8800010000..0x880001ffff -> 0x0000000000 <6>[ 2.472949] layerscape-pcie 3500000.pcie: MEM 0x8840000000..0x887fffffff -> 0x0040000000 <6>[ 2.481870] layerscape-pcie 3500000.pcie: iATU: unroll F, 8 ob, 6 ib, align 4K, limit 4G <6>[ 3.448019] layerscape-pcie 3500000.pcie: Phy link never came up <6>[ 3.454413] layerscape-pcie 3500000.pcie: PCI host bridge to bus 0002:00 <6>[ 3.461449] pci_bus 0002:00: root bus resource [bus 00-ff] <6>[ 3.467254] pci_bus 0002:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff]) <6>[ 3.476568] pci_bus 0002:00: root bus resource [mem 0x8840000000-0x887fffffff] (bus address [0x40000000-0x7fffffff]) <6>[ 3.487476] pci 0002:00:00.0: [1957:82c1] type 01 class 0x060400 PCIe Root Port <6>[ 3.495140] pci 0002:00:00.0: PCI bridge to [bus 01-ff] <6>[ 3.500725] pci 0002:00:00.0: supports D1 D2 <6>[ 3.505300] pci 0002:00:00.0: PME# supported from D0 D1 D2 D3hot <6>[ 3.512504] pci 0002:00:00.0: PCI bridge to [bus 01-ff] <6>[ 3.518052] pci_bus 0002:00: resource 4 [io 0x10000-0x1ffff] <6>[ 3.524119] pci_bus 0002:00: resource 5 [mem 0x8840000000-0x887fffffff] <6>[ 3.550458] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 3.558924] printk: legacy console [ttyS0] disabled <6>[ 3.564311] 21c0500.serial: ttyS0 at MMIO 0x21c0500 (irq = 20, base_baud = 12500000) is a 16550A <6>[ 3.573477] printk: legacy console [ttyS0] enabled <6>[ 3.573477] printk: legacy console [ttyS0] enabled <6>[ 3.583650] printk: legacy bootconsole [ns16550a0] disabled <6>[ 3.583650] printk: legacy bootconsole [ns16550a0] disabled <6>[ 3.596586] 21c0600.serial: ttyS1 at MMIO 0x21c0600 (irq = 20, base_baud = 12500000) is a 16550A <6>[ 3.606539] 2270000.serial: ttyLP2 at MMIO 0x2270000 (irq = 21, base_baud = 12500000) is a FSL_LPUART <6>[ 3.616555] msm_serial: driver initialized <6>[ 3.621150] SuperH (H)SCI(F) driver initialized <6>[ 3.626063] STM32 USART driver initialized <5>[ 3.633871] arm-smmu 5000000.iommu: probing hardware configuration... <5>[ 3.640613] arm-smmu 5000000.iommu: SMMUv2 with: <5>[ 3.645511] arm-smmu 5000000.iommu: stage 1 translation <5>[ 3.651109] arm-smmu 5000000.iommu: stage 2 translation <5>[ 3.656709] arm-smmu 5000000.iommu: nested translation <5>[ 3.662216] arm-smmu 5000000.iommu: coherent table walk <5>[ 3.667815] arm-smmu 5000000.iommu: (IDR0.CTTW overridden by FW configuration) <5>[ 3.675420] arm-smmu 5000000.iommu: stream matching with 128 register groups <5>[ 3.682851] arm-smmu 5000000.iommu: 64 context banks (0 stage-2 only) <5>[ 3.689678] arm-smmu 5000000.iommu: Supported page sizes: 0x61311000 <5>[ 3.696412] arm-smmu 5000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA <5>[ 3.703141] arm-smmu 5000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA <5>[ 3.710092] arm-smmu 5000000.iommu: preserved 0 boot mappings <4>[ 3.716266] arm-smmu 5000000.iommu: Failed to disable prefetcher for errata workarounds, check SACR.CACHE_LOCK <6>[ 3.729961] loop: module loaded <6>[ 3.742071] megasas: 07.727.03.00-rc1 <6>[ 3.746837] ahci-qoriq 3200000.sata: Adding to iommu group 0 <4>[ 3.752909] ahci-qoriq 3200000.sata: supply ahci not found, using dummy regulator <4>[ 3.760762] ahci-qoriq 3200000.sata: supply phy not found, using dummy regulator <4>[ 3.768485] ahci-qoriq 3200000.sata: supply target not found, using dummy regulator <6>[ 3.776553] ahci-qoriq 3200000.sata: AHCI vers 0001.0301, 32 command slots, 6 Gbps, platform mode <6>[ 3.785732] ahci-qoriq 3200000.sata: 1/1 ports implemented (port mask 0x1) <6>[ 3.792903] ahci-qoriq 3200000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst <6>[ 3.803337] scsi host0: ahci-qoriq <6>[ 3.807148] ata1: SATA max UDMA/133 mmio [mem 0x03200000-0x0320ffff] port 0x100 irq 95 lpm-pol 0 <5>[ 3.834518] 5 fixed-partitions partitions found on MTD device 20c0000.spi <5>[ 3.841618] Creating 5 MTD partitions on \"20c0000.spi\": <5>[ 3.847131] 0x000000000000-0x000000010000 : \"rcw\" <5>[ 3.852865] 0x000000010000-0x0000001e0000 : \"failsafe bootloader\" <5>[ 3.859886] 0x000000200000-0x000000210000 : \"configuration store\" <5>[ 3.867026] 0x000000210000-0x0000003e0000 : \"bootloader\" <5>[ 3.873299] 0x0000003e0000-0x000000400000 : \"bootloader environment\" <6>[ 3.883510] tun: Universal TUN/TAP device driver, 1.6 <6>[ 3.889524] thunder_xcv, ver 1.0 <6>[ 3.893055] thunder_bgx, ver 1.0 <6>[ 3.896576] nicpf, ver 1.0 <6>[ 3.900380] fsl_enetc_mdio 0000:00:00.3: Adding to iommu group 1 <6>[ 4.008029] fsl_enetc_mdio 0000:00:00.3: enabling device (0400 -> 0402) <6>[ 4.048417] mdio_bus 0000:00:00.3:04: Fixed dependency cycle(s) with /soc/pcie@1f0000000/mdio@0,3/ethernet-phy@4/vddio-regulator <6>[ 4.126304] ata1: SATA link down (SStatus 0 SControl 300) <6>[ 4.187214] fsl_enetc_ptp 0000:00:00.4: Adding to iommu group 2 <6>[ 4.193536] fsl_enetc_ptp 0000:00:00.4: enabling device (0404 -> 0406) <4>[ 4.200483] ptp_qoriq: device tree node missing required elements, try automatic configuration <6>[ 4.209518] pps pps0: new PPS source ptp0 <6>[ 4.214308] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version <6>[ 4.221829] hns3: Copyright (c) 2017 Huawei Corporation. <6>[ 4.227454] hclge is initializing <6>[ 4.231061] e1000: Intel(R) PRO/1000 Network Driver <6>[ 4.236222] e1000: Copyright (c) 1999-2006 Intel Corporation. <6>[ 4.242270] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 4.247514] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 4.253740] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 4.259421] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 4.265297] igbvf: Intel(R) Gigabit Virtual Function Network Driver <6>[ 4.271849] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. <6>[ 4.278284] sky2: driver version 1.30 <6>[ 4.283193] VFIO - User Level meta-driver version: 0.3 <6>[ 4.288961] dwc3 3100000.usb: Adding to iommu group 3 <6>[ 4.294810] dwc3 3110000.usb: Adding to iommu group 4 <6>[ 4.302991] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller <6>[ 4.308791] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 <6>[ 4.316874] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000808002000010 <6>[ 4.326603] xhci-hcd xhci-hcd.0.auto: irq 100, io mem 0x03110000 <6>[ 4.332983] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller <6>[ 4.338756] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 <6>[ 4.346715] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed <6>[ 4.353919] hub 1-0:1.0: USB hub found <6>[ 4.357967] hub 1-0:1.0: 1 port detected <6>[ 4.362368] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. <6>[ 4.371061] hub 2-0:1.0: USB hub found <6>[ 4.375104] hub 2-0:1.0: 1 port detected <6>[ 4.379819] usbcore: registered new interface driver usb-storage <6>[ 4.388372] i2c_dev: i2c /dev entries driver <6>[ 4.396553] sp805-wdt c000000.watchdog: registration successful <6>[ 4.402918] sp805-wdt c010000.watchdog: registration successful <6>[ 4.411174] qoriq-cpufreq qoriq-cpufreq: Freescale QorIQ CPU frequency scaling driver <6>[ 4.420173] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.426647] sdhci: Copyright(c) Pierre Ossman <6>[ 4.431803] Synopsys Designware Multimedia Card Interface Driver <6>[ 4.438755] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 4.445289] sdhci-esdhc 2140000.mmc: Adding to iommu group 5 <6>[ 4.451723] sdhci-esdhc 2150000.mmc: Adding to iommu group 6 <6>[ 4.458366] usbcore: registered new interface driver usbhid <6>[ 4.464583] usbhid: USB HID core driver <6>[ 4.471356] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 (0,8000003f) counters available <6>[ 4.485610] NET: Registered PF_PACKET protocol family <6>[ 4.491039] 9pnet: Installing 9P2000 support <6>[ 4.495612] mmc1: SDHCI controller on 2140000.mmc [2140000.mmc] using ADMA <5>[ 4.500091] Key type dns_resolver registered <6>[ 4.507334] mmc0: SDHCI controller on 2150000.mmc [2150000.mmc] using ADMA <6>[ 4.513927] registered taskstats version 1 <5>[ 4.518939] Loading compiled-in X.509 certificates <6>[ 4.529012] Demotion targets for Node 0: null <6>[ 4.536315] fsl-edma 22c0000.dma-controller: Adding to iommu group 7 <6>[ 4.545357] pcieport 0001:00:00.0: Adding to iommu group 8 <6>[ 4.551379] pcieport 0001:00:00.0: PME: Signaling with IRQ 105 <6>[ 4.557728] pcieport 0001:00:00.0: AER: enabled with IRQ 105 <6>[ 4.563893] pcieport 0002:00:00.0: Adding to iommu group 9 <6>[ 4.569842] pcieport 0002:00:00.0: PME: Signaling with IRQ 106 <6>[ 4.576155] pcieport 0002:00:00.0: AER: enabled with IRQ 106 <6>[ 4.587257] input: buttons0 as /devices/platform/buttons0/input/input0 <6>[ 4.608044] usb 1-1: new high-speed USB device number 2 using xhci-hcd <6>[ 4.612038] mmc0: new HS400 MMC card at address 0001 <6>[ 4.620553] mmcblk0: mmc0:0001 S0J58X 29.6 GiB <6>[ 4.626436] mmcblk0: p1 p2 p3 <6>[ 4.630259] mmcblk0boot0: mmc0:0001 S0J58X 31.5 MiB <6>[ 4.636438] mmcblk0boot1: mmc0:0001 S0J58X 31.5 MiB <6>[ 4.642460] mmcblk0rpmb: mmc0:0001 S0J58X 4.00 MiB, chardev (234:0) <6>[ 4.802014] hub 1-1:1.0: USB hub found <6>[ 4.806301] hub 1-1:1.0: 7 ports detected <6>[ 5.144048] usb 1-1.6: new full-speed USB device number 3 using xhci-hcd <3>[ 5.317003] hid-generic 0003:064F:2AF9.0001: device has no listeners, quitting <6>[ 16.860213] clk: Disabling unused clocks <6>[ 16.864550] PM: genpd: Disabling unused power domains <6>[ 16.869943] ALSA device list: <6>[ 16.873227] No soundcards found. <6>[ 16.879373] Freeing unused kernel memory: 2432K <6>[ 16.884451] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 16.956593] udevd[111]: starting version 3.2.9 <5>[ 18.100024] random: crng init done <27>[ 18.106507] udevd[111]: specified user 'tss' unknown <27>[ 18.111908] udevd[111]: specified group 'tss' unknown <30>[ 18.118327] udevd[112]: starting eudev-3.2.9 <6>[ 18.396343] EDAC MC0: Giving out device to module fsl_ddr_edac controller fsl_mc_err: DEV fsl_mc_err (INTERRUPT) <6>[ 18.418907] fsl_ddr_edac acquired irq 109 for MC <6>[ 18.425073] fsl_ddr_edac MC err registered <4>[ 18.435402] at24 0-0050: supply vcc not found, using dummy regulator <6>[ 18.451644] NET: Registered PF_INET6 protocol family <6>[ 18.465241] CAN device driver interface <4>[ 18.470879] rtc-rv8803 0-0032: Voltage low, temperature compensation stopped. <6>[ 18.476649] Segment Routing with IPv6 <4>[ 18.481574] rtc-rv8803 0-0032: Voltage low, data loss detected. <6>[ 18.500531] In-situ OAM (IOAM) with IPv6 <6>[ 18.500950] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 32 bytes/write <6>[ 18.512448] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. <4>[ 18.530305] at24 1-0057: supply vcc not found, using dummy regulator <4>[ 18.537542] rtc-rv8803 0-0032: Voltage low, data is invalid. <6>[ 18.544138] rtc-rv8803 0-0032: registered as rtc0 <6>[ 18.550581] at24 1-0057: 4096 byte 24c32 EEPROM, writable, 32 bytes/write <4>[ 18.557860] at24 2-0050: supply vcc not found, using dummy regulator <4>[ 18.569383] rtc-rv8803 0-0032: Voltage low, data is invalid. <6>[ 18.575431] sl28cpld-wdt 2000000.i2c:sl28cpld@4a:watchdog@4: initial timeout 6 sec <3>[ 18.577798] rtc-rv8803 0-0032: hctosys: unable to read the hardware clock <6>[ 18.598423] mscc_felix 0000:00:00.5: Adding to iommu group 10 <6>[ 18.606422] at24 2-0050: 4096 byte 24c32 EEPROM, writable, 32 bytes/write <6>[ 18.615644] mscc_felix 0000:00:00.5: enabling device (0400 -> 0402) <6>[ 18.669536] input: buttons1 as /devices/platform/buttons1/input/input13 <6>[ 18.715516] ftm-alarm 2800000.rtc: registered as rtc1 <6>[ 18.735376] usbcore: registered new device driver onboard-usb-dev <6>[ 18.743978] caam 8000000.crypto: device ID = 0x0a12070000000000 (Era 10) <6>[ 18.752991] caam 8000000.crypto: job rings = 4, qi = 0 <6>[ 18.813654] mali-dp f080000.display: Adding to iommu group 11 <6>[ 18.822634] etnaviv etnaviv: bound f0c0000.gpu (ops gpu_ops [etnaviv]) <6>[ 18.854804] etnaviv-gpu f0c0000.gpu: model: GC7000, revision: 6202 <6>[ 18.861717] [drm] Initialized etnaviv 1.4.0 for etnaviv on minor 0 <6>[ 18.878028] caam_jr 8010000.jr: Adding to iommu group 12 <6>[ 18.890951] caam algorithms registered in /proc/crypto <6>[ 18.896472] caam 8000000.crypto: registering rng-caam <6>[ 18.901980] caam 8000000.crypto: rng crypto API alg registered prng-caam <6>[ 18.909175] caam_jr 8020000.jr: Adding to iommu group 13 <6>[ 18.916537] caam_jr 8030000.jr: Adding to iommu group 14 <6>[ 18.924602] caam_jr 8040000.jr: Adding to iommu group 15 done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-510460/environment . /lava-510460/environment / # /lava-510460/bin/lava-test-runner /lava-510460/0 /lava-510460/bin/lava-test-runner /lava-510460/0 + export 'TESTRUN_ID=0_dmesg' + c<8>[ 19.534535] d /lava-510460/0/tests/0_dmesg + cat uuid + UUID=510460_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 19.555325] <8>[ 19.576186] <8>[ 19.598552] + set +x <8>[ 19.608342] / # <0�