Trying 0.0.0.0... Connected to 0. Escape character is '^]'. U-Boot SPL 2021.10 (Oct 25 2021 - 13:39:59 +0200) Trying to boot from SPI U-Boot 2021.10 (Oct 25 2021 - 13:39:59 +0200) SoC: LS1028A Rev1.0 (0x870b0110) Clock Configuration: CPU0(A72):1300 MHz CPU1(A72):1300 MHz Bus: 400 MHz DDR: 1600 MT/s Reset Configuration Word (RCW): 00000000: 34004010 00000030 00000000 00000000 00000010: 00000000 008f0000 0030c000 00000000 00000020: 06200000 00002580 00000000 00019016 00000030: 00000000 00000048 00000000 00000000 00000040: 00000000 00000000 00000000 00000000 00000050: 00000000 00000000 00000000 00000000 00000060: 00000304 00000000 000e7000 00000000 00000070: bb580000 00020000 Model: Kontron SMARC-sAL28 (Dual PHY) EL: 3 DRAM: 4 GiB DDR 4 GiB (DDR3, 32-bit, CL=11, ECC on) SEC0: RNG instantiated CPU: 2 cores online Using SERDES1 Protocol: 47960 (0xbb58) MMC: FSL_SDHC: 1, FSL_SDHC: 0 Loading Environment from SPIFlash... SF: Detected w25q32dw with page size 256 Bytes, erase size 64 KiB, total 4 MiB OK PCIe1: pcie@3400000 Root Complex: no link PCIe2: pcie@3500000 Root Complex: no link In: serial@21c0500 Out: serial@21c0500 Err: serial@21c0500 Net: eth0: enetc-0, eth1: enetc-1 Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffffffffffff setenv initrd_high 0xffffffffffffffff => setenv fdt_high 0xffffffffffffffff setenv fdt_high 0xffffffffffffffff => dhcp dhcp enetc-0 Waiting for PHY auto negotiation to complete.... done BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 172.16.0.69 (254 ms) => setenv serverip 10.228.65.1 setenv serverip 10.228.65.1 => tftp 0x82000000 514071/tftp-deploy-xzuzicx6/kernel/Image tftp 0x82000000 514071/tftp-deploy-xzuzicx6/kernel/Image Using enetc-0 device TFTP from server 10.228.65.1; our IP address is 172.16.0.69; sending through gateway 172.16.0.254 Filename '514071/tftp-deploy-xzuzicx6/kernel/Image'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 6.9 MiB/s done Bytes transferred = 29276672 (1beba00 hex) => tftp 0x90080000 514071/tftp-deploy-xzuzicx6/ramdisk/ramdisk.cpio.gz.uboot tftp 0x90080000 514071/tftp-deploy-xzuzicx6/ramdisk/ramdisk.cpio.gz.uboot Using enetc-0 device TFTP from server 10.228.65.1; our IP address is 172.16.0.69; sending through gateway 172.16.0.254 Filename '514071/tftp-deploy-xzuzicx6/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x90080000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################### 14.1 MiB/s done Bytes transferred = 20721392 (13c2ef0 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x90000000 514071/tftp-deploy-xzuzicx6/dtb/fsl-ls1028a-kontron-kbox-a-230-ls.dtb tftp 0x90000000 514071/tftp-deploy-xzuzicx6/dtb/fsl-ls1028a-kontron-kbox-a-230-ls.dtb Using enetc-0 device TFTP from server 10.228.65.1; our IP address is 172.16.0.69; sending through gateway 172.16.0.254 Filename '514071/tftp-deploy-xzuzicx6/dtb/fsl-ls1028a-kontron-kbox-a-230-ls.dtb'. Load address: 0x90000000 Loading: *## 4.8 MiB/s done Bytes transferred = 25399 (6337 hex) => setenv bootargs 'console=ttyS0,115200n8 earlycon n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyS0,115200n8 earlycon n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => booti 0x82000000 0x90080000 0x90000000 booti 0x82000000 0x90080000 0x90000000 ## Loading init Ramdisk from Legacy Image at 90080000 ... Image Name: Created: 2024-11-11 13:11:08 UTC Image Type: AArch64 Linux RAMDisk Image (uncompressed) Data Size: 20721328 Bytes = 19.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 90000000 Booting using the fdt blob at 0x90000000 Using Device Tree in place at 0000000090000000, end 0000000090009336 WARNING could not find node fsl,ls1028a-gpu: FDT_ERR_NOTFOUND. Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.15.167 (KernelCI@build-j372771-arm64-clang-17-defconfig-config-randomize-bajpjzk) (Debian clang version 17.0.6 (++20231208085813+6009708b4367-1~exp1~20231208085906.81), Debian LLD 17.0.6) #1 SMP PREEMPT Mon Nov 11 12:40:54 UTC 2024 [ 0.000000] Machine model: Kontron KBox A-230-LS [ 0.000000] efi: UEFI not found. [ 0.000000] earlycon: ns16550a0 at MMIO 0x00000000021c0500 (options '115200n8') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000020ffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x20ff7d9a40-0x20ff7dbfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000020ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000002080000000-0x00000020ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000020ffffffff] [ 0.000000] cma: Reserved 32 MiB at 0x00000000fcc00000 [ 0.000000] percpu: Embedded 20 pages/cpu s41624 r8192 d32104 u81920 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=ttyS0,115200n8 earlycon n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <5>[ 0.000000] Unknown kernel command line parameters \"n8\", will be passed to user space. <6>[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] software IO TLB: mapped [mem 0x00000000f8c00000-0x00000000fcc00000] (64MB) <6>[ 0.000000] Memory: 3965588K/4194304K available (15488K kernel code, 3118K rwdata, 8256K rodata, 1600K init, 524K bss, 195948K reserved, 32768K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. <6>[ 0.000000] Trampoline variant of Tasks RCU enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 <6>[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode <6>[ 0.000000] GICv3: 256 SPIs implemented <6>[ 0.000000] GICv3: 0 Extended SPIs implemented <6>[ 0.000000] GICv3: Distributor has no Range Selector support <6>[ 0.000000] Root IRQ handler: gic_handle_irq <6>[ 0.000000] GICv3: 16 PPIs implemented <6>[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006040000 <6>[ 0.000000] ITS [mem 0x06020000-0x0603ffff] <6>[ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices @2080080000 (flat, esz 8, psz 64K, shr 0) <6>[ 0.000000] ITS: using cache flushing for cmd queue <6>[ 0.000000] GICv3: using LPI property table @0x0000002080030000 <6>[ 0.000000] GIC: using cache flushing for LPI property table <6>[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000002080040000 <6>[ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns <6>[ 0.000000] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns <6>[ 0.008722] Console: colour dummy device 80x25 <6>[ 0.013512] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000) <6>[ 0.024230] pid_max: default: 32768 minimum: 301 <6>[ 0.029182] LSM: Security Framework initializing <6>[ 0.034159] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.041905] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) <6>[ 0.051042] rcu: Hierarchical SRCU implementation. <6>[ 0.056291] Platform MSI: gic-its@6020000 domain created <6>[ 0.061985] PCI/MSI: /interrupt-controller@6000000/gic-its@6020000 domain created <6>[ 0.069844] fsl-mc MSI: gic-its@6020000 domain created <6>[ 0.075881] EFI services will not be available. <6>[ 0.080819] smp: Bringing up secondary CPUs ... <6>[ 0.085936] Detected PIPT I-cache on CPU1 <6>[ 0.085957] GICv3: CPU1: found redistributor 1 region 0:0x0000000006060000 <6>[ 0.085966] GICv3: CPU1: using allocated LPI pending table @0x0000002080050000 <6>[ 0.085988] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] <6>[ 0.086050] smp: Brought up 1 node, 2 CPUs <6>[ 0.116367] SMP: Total of 2 processors activated. <6>[ 0.121379] CPU features: detected: 32-bit EL0 Support <6>[ 0.126835] CPU features: detected: 32-bit EL1 Support <6>[ 0.132287] CPU features: detected: CRC32 instructions <6>[ 0.148646] CPU: All CPU(s) started at EL2 <6>[ 0.153077] alternatives: patching kernel code <6>[ 0.158560] devtmpfs: initialized <4>[ 0.164327] KASLR disabled due to lack of seed <6>[ 0.169189] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns <6>[ 0.179299] futex hash table entries: 512 (order: 3, 32768 bytes, linear) <6>[ 0.186972] pinctrl core: initialized pinctrl subsystem <6>[ 0.193032] DMI not present or invalid. <6>[ 0.197533] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.204561] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.212050] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.220158] audit: initializing netlink subsys (disabled) <5>[ 0.225947] audit: type=2000 audit(0.144:1): state=initialized audit_enabled=0 res=1 <6>[ 0.226468] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.234038] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.240522] cpuidle: using governor menu <6>[ 0.251697] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. <6>[ 0.258838] ASID allocator initialised with 65536 entries <6>[ 0.265273] Serial: AMBA PL011 UART driver <6>[ 0.272630] Machine: Kontron KBox A-230-LS <6>[ 0.277036] SoC family: QorIQ LS1028A <6>[ 0.280989] SoC ID: svr:0x870b0110, Revision: 1.0 <6>[ 0.299591] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.306634] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages <6>[ 0.313663] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.320692] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages <6>[ 0.328533] ACPI: Interpreter disabled. <6>[ 0.333709] iommu: Default domain type: Translated <6>[ 0.338893] iommu: DMA domain TLB invalidation policy: strict mode <6>[ 0.345608] vgaarb: loaded <5>[ 0.348738] SCSI subsystem initialized <6>[ 0.352987] usbcore: registered new interface driver usbfs <6>[ 0.358809] usbcore: registered new interface driver hub <6>[ 0.364449] usbcore: registered new device driver usb <6>[ 0.370056] imx-i2c 2000000.i2c: can't get pinctrl, bus recovery not supported <6>[ 0.377871] i2c i2c-0: IMX I2C adapter registered <6>[ 0.383050] imx-i2c 2030000.i2c: can't get pinctrl, bus recovery not supported <6>[ 0.390703] i2c i2c-1: IMX I2C adapter registered <6>[ 0.395805] imx-i2c 2040000.i2c: can't get pinctrl, bus recovery not supported <6>[ 0.403454] i2c i2c-2: IMX I2C adapter registered <6>[ 0.408727] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.414002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.423504] PTP clock support registered <6>[ 0.427801] EDAC MC: Ver: 3.0.0 <6>[ 0.431985] FPGA manager framework <6>[ 0.435717] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.442549] clocksource: Switched to clocksource arch_sys_counter <5>[ 0.449063] VFS: Disk quotas dquot_6.6.0 <6>[ 0.453312] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 0.460609] pnp: PnP ACPI: disabled <6>[ 0.467749] NET: Registered PF_INET protocol family <6>[ 0.473100] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.482236] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) <6>[ 0.491155] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.499249] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) <6>[ 0.507590] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) <6>[ 0.515570] TCP: Hash tables configured (established 32768 bind 32768) <6>[ 0.522482] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) <6>[ 0.529536] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) <6>[ 0.537088] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.543347] RPC: Registered named UNIX socket transport module. <6>[ 0.549599] RPC: Registered udp transport module. <6>[ 0.554610] RPC: Registered tcp transport module. <6>[ 0.559619] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.566387] PCI: CLS 0 bytes, default 64 <6>[ 0.570763] Unpacking initramfs... <6>[ 0.574474] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available <6>[ 0.583315] kvm [1]: IPA Size Limit: 44 bits <6>[ 0.588734] kvm [1]: GICv3: no GICV resource entry <6>[ 0.593873] kvm [1]: disabling GICv2 emulation <6>[ 0.598644] kvm [1]: GIC system register CPU interface enabled <6>[ 0.604853] kvm [1]: vgic interrupt IRQ9 <6>[ 0.609126] kvm [1]: Hyp mode initialized successfully <5>[ 0.615243] Initialise system trusted keyrings <6>[ 0.620127] workingset: timestamp_bits=42 max_order=20 bucket_order=0 <6>[ 0.630895] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 0.637490] NFS: Registering the id_resolver key type <5>[ 0.642916] Key type id_resolver registered <5>[ 0.647415] Key type id_legacy registered <6>[ 0.651803] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.658840] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 0.666681] 9p: Installing v9fs 9p2000 file system support <5>[ 0.700531] Key type asymmetric registered <5>[ 0.704942] Asymmetric key parser 'x509' registered <6>[ 0.710186] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) <6>[ 0.717927] io scheduler mq-deadline registered <6>[ 0.722762] io scheduler kyber registered <6>[ 0.733509] EINJ: ACPI disabled. <6>[ 0.746086] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 0.754195] printk: console [ttyS0] disabled <6>[ 0.758829] 21c0500.serial: ttyS0 at MMIO 0x21c0500 (irq = 24, base_baud = 12500000) is a 16550A <6>[ 0.767994] printk: console [ttyS0] enabled <6>[ 0.767994] printk: console [ttyS0] enabled <6>[ 0.776945] printk: bootconsole [ns16550a0] disabled <6>[ 0.776945] printk: bootconsole [ns16550a0] disabled <6>[ 0.787892] 21c0600.serial: ttyS1 at MMIO 0x21c0600 (irq = 24, base_baud = 12500000) is a 16550A <6>[ 0.797406] SuperH (H)SCI(F) driver initialized <6>[ 0.802531] msm_serial: driver initialized <5>[ 0.808019] arm-smmu 5000000.iommu: probing hardware configuration... <5>[ 0.814753] arm-smmu 5000000.iommu: SMMUv2 with: <5>[ 0.819653] arm-smmu 5000000.iommu: stage 1 translation <5>[ 0.825245] arm-smmu 5000000.iommu: stage 2 translation <5>[ 0.830835] arm-smmu 5000000.iommu: nested translation <5>[ 0.836341] arm-smmu 5000000.iommu: stream matching with 128 register groups <5>[ 0.843769] arm-smmu 5000000.iommu: 64 context banks (0 stage-2 only) <5>[ 0.850605] arm-smmu 5000000.iommu: Supported page sizes: 0x61311000 <5>[ 0.857344] arm-smmu 5000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA <5>[ 0.864080] arm-smmu 5000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA <6>[ 0.874364] loop: module loaded <6>[ 0.886830] megasas: 07.717.02.00-rc1 <6>[ 0.891462] ahci-qoriq 3200000.sata: Adding to iommu group 0 <4>[ 0.897570] ahci-qoriq 3200000.sata: supply ahci not found, using dummy regulator <4>[ 0.905450] ahci-qoriq 3200000.sata: supply phy not found, using dummy regulator <4>[ 0.913172] ahci-qoriq 3200000.sata: supply target not found, using dummy regulator <6>[ 0.921234] ahci-qoriq 3200000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode <6>[ 0.930500] ahci-qoriq 3200000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst <6>[ 0.940949] scsi host0: ahci-qoriq <6>[ 0.944804] ata1: SATA max UDMA/133 mmio [mem 0x03200000-0x0320ffff] port 0x100 irq 31 <6>[ 0.954841] spi-nor spi0.0: w25q32dw (4096 Kbytes) <6>[ 1.268762] ata1: SATA link down (SStatus 0 SControl 300) <6>[ 1.306641] Freeing initrd memory: 20228K <5>[ 1.322064] 5 fixed-partitions partitions found on MTD device 20c0000.spi <5>[ 1.329154] Creating 5 MTD partitions on \"20c0000.spi\": <5>[ 1.334662] 0x000000000000-0x000000010000 : \"rcw\" <5>[ 1.340322] 0x000000010000-0x0000001e0000 : \"failsafe bootloader\" <5>[ 1.347256] 0x000000200000-0x000000210000 : \"configuration store\" <5>[ 1.354181] 0x000000210000-0x0000003e0000 : \"bootloader\" <5>[ 1.360352] 0x0000003e0000-0x000000400000 : \"bootloader environment\" <6>[ 1.369497] tun: Universal TUN/TAP device driver, 1.6 <6>[ 1.375336] thunder_xcv, ver 1.0 <6>[ 1.378869] thunder_bgx, ver 1.0 <6>[ 1.382381] nicpf, ver 1.0 <6>[ 1.386171] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version <6>[ 1.393687] hns3: Copyright (c) 2017 Huawei Corporation. <6>[ 1.399306] hclge is initializing <6>[ 1.402899] e1000: Intel(R) PRO/1000 Network Driver <6>[ 1.408054] e1000: Copyright (c) 1999-2006 Intel Corporation. <6>[ 1.414099] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 1.419340] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.425563] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 1.431243] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.437112] igbvf: Intel(R) Gigabit Virtual Function Network Driver <6>[ 1.443662] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. <6>[ 1.450057] sky2: driver version 1.30 <6>[ 1.454610] VFIO - User Level meta-driver version: 0.3 <6>[ 1.460378] dwc3 3100000.usb: Adding to iommu group 1 <6>[ 1.466292] dwc3 3110000.usb: Adding to iommu group 2 <6>[ 1.473054] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 1.479884] ehci-pci: EHCI PCI platform driver <6>[ 1.484624] ehci-platform: EHCI generic platform driver <6>[ 1.490196] ehci-orion: EHCI orion driver <6>[ 1.494535] ehci-exynos: EHCI Exynos driver <6>[ 1.499049] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 1.505522] ohci-pci: OHCI PCI platform driver <6>[ 1.510259] ohci-platform: OHCI generic platform driver <6>[ 1.515829] ohci-exynos: OHCI Exynos driver <6>[ 1.520516] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller <6>[ 1.526300] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 <6>[ 1.534372] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000008002010010 <6>[ 1.544093] xhci-hcd xhci-hcd.0.auto: irq 29, io mem 0x03100000 <6>[ 1.550390] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller <6>[ 1.556162] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 <6>[ 1.564112] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed <6>[ 1.571251] hub 1-0:1.0: USB hub found <6>[ 1.575290] hub 1-0:1.0: 1 port detected <6>[ 1.579663] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. <6>[ 1.588287] hub 2-0:1.0: USB hub found <6>[ 1.592324] hub 2-0:1.0: 1 port detected <6>[ 1.596736] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller <6>[ 1.602512] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 <6>[ 1.610605] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000008002010010 <6>[ 1.620320] xhci-hcd xhci-hcd.1.auto: irq 30, io mem 0x03110000 <6>[ 1.626626] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller <6>[ 1.632397] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 <6>[ 1.640347] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed <6>[ 1.647424] hub 3-0:1.0: USB hub found <6>[ 1.651461] hub 3-0:1.0: 1 port detected <6>[ 1.655826] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. <6>[ 1.664451] hub 4-0:1.0: USB hub found <6>[ 1.668492] hub 4-0:1.0: 1 port detected <6>[ 1.673087] usbcore: registered new interface driver usb-storage <6>[ 1.681002] i2c_dev: i2c /dev entries driver <6>[ 1.688317] sp805-wdt c000000.watchdog: registration successful <6>[ 1.694633] sp805-wdt c010000.watchdog: registration successful <6>[ 1.702036] qoriq-cpufreq qoriq-cpufreq: Freescale QorIQ CPU frequency scaling driver <6>[ 1.710783] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.717255] sdhci: Copyright(c) Pierre Ossman <6>[ 1.722346] Synopsys Designware Multimedia Card Interface Driver <6>[ 1.729214] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.735632] sdhci-esdhc 2140000.mmc: Adding to iommu group 3 <6>[ 1.741621] sdhci-esdhc 2150000.mmc: Adding to iommu group 4 <6>[ 1.741654] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.755123] usbcore: registered new interface driver usbhid <6>[ 1.760988] usbhid: USB HID core driver <6>[ 1.768199] NET: Registered PF_PACKET protocol family <6>[ 1.773591] mmc1: SDHCI controller on 2140000.mmc [2140000.mmc] using ADMA <6>[ 1.773647] 9pnet: Installing 9P2000 support <6>[ 1.780898] mmc0: SDHCI controller on 2150000.mmc [2150000.mmc] using ADMA <5>[ 1.785335] Key type dns_resolver registered <5>[ 1.797225] Loading compiled-in X.509 certificates <6>[ 1.804776] fsl-edma 22c0000.dma-controller: Adding to iommu group 5 <6>[ 1.812907] pci-host-generic 1f0000000.pcie: host bridge /soc/pcie@1f0000000 ranges: <6>[ 1.820987] pci-host-generic 1f0000000.pcie: MEM 0x01f8000000..0x01f815ffff -> 0x01f8000000 <6>[ 1.830155] pci-host-generic 1f0000000.pcie: MEM 0x01f8160000..0x01f81cffff -> 0x01f8160000 <6>[ 1.839339] pci-host-generic 1f0000000.pcie: MEM 0x01f81d0000..0x01f81effff -> 0x01f81d0000 <6>[ 1.848487] pci-host-generic 1f0000000.pcie: MEM 0x01f81f0000..0x01f820ffff -> 0x01f81f0000 <6>[ 1.857600] pci-host-generic 1f0000000.pcie: MEM 0x01f8210000..0x01f822ffff -> 0x01f8210000 <6>[ 1.866768] pci-host-generic 1f0000000.pcie: MEM 0x01f8230000..0x01f824ffff -> 0x01f8230000 <6>[ 1.875915] pci-host-generic 1f0000000.pcie: MEM 0x01fc000000..0x01fc3fffff -> 0x01fc000000 <6>[ 1.885098] pci-host-generic 1f0000000.pcie: ECAM at [mem 0x1f0000000-0x1f00fffff] for [bus 00] <6>[ 1.894173] pci-host-generic 1f0000000.pcie: PCI host bridge to bus 0000:00 <6>[ 1.901425] pci_bus 0000:00: root bus resource [bus 00] <6>[ 1.906935] pci_bus 0000:00: root bus resource [mem 0x1f8000000-0x1f815ffff] <6>[ 1.914272] pci_bus 0000:00: root bus resource [mem 0x1f8160000-0x1f81cffff pref] <6>[ 1.922046] pci_bus 0000:00: root bus resource [mem 0x1f81d0000-0x1f81effff] <6>[ 1.927164] mmc0: new HS400 MMC card at address 0001 <6>[ 1.929384] pci_bus 0000:00: root bus resource [mem 0x1f81f0000-0x1f820ffff pref] <6>[ 1.934644] usb 3-1: new high-speed USB device number 2 using xhci-hcd <6>[ 1.942388] pci_bus 0000:00: root bus resource [mem 0x1f8210000-0x1f822ffff] <6>[ 1.942393] pci_bus 0000:00: root bus resource [mem 0x1f8230000-0x1f824ffff pref] <6>[ 1.950750] mmcblk0: mmc0:0001 S0J58X 29.6 GiB <6>[ 1.956536] pci_bus 0000:00: root bus resource [mem 0x1fc000000-0x1fc3fffff] <6>[ 1.956559] pci 0000:00:00.0: [1957:e100] type 00 class 0x020001 <6>[ 1.970919] mmcblk0: p1 p2 p3 <6>[ 1.976502] pci 0000:00:00.0: BAR 0: [mem 0x1f8000000-0x1f803ffff 64bit] (from Enhanced Allocation, properties 0x0) <6>[ 1.983230] mmcblk0boot0: mmc0:0001 S0J58X 31.5 MiB <6>[ 1.986075] pci 0000:00:00.0: BAR 2: [mem 0x1f8160000-0x1f816ffff 64bit pref] (from Enhanced Allocation, properties 0x1) <6>[ 1.997773] mmcblk0boot1: mmc0:0001 S0J58X 31.5 MiB <6>[ 2.002061] pci 0000:00:00.0: VF BAR 0: [mem 0x1f81d0000-0x1f81dffff 64bit] (from Enhanced Allocation, properties 0x4) <6>[ 2.002069] pci 0000:00:00.0: VF BAR 2: [mem 0x1f81f0000-0x1f81fffff 64bit pref] (from Enhanced Allocation, properties 0x3) <6>[ 2.002090] pci 0000:00:00.0: PME# supported from D0 D3hot <6>[ 2.014077] mmcblk0rpmb: mmc0:0001 S0J58X 4.00 MiB, chardev (234:0) <6>[ 2.018511] pci 0000:00:00.0: VF(n) BAR0 space: [mem 0x1f81d0000-0x1f81effff 64bit] (contains BAR0 for 2 VFs) <6>[ 2.063476] pci 0000:00:00.0: VF(n) BAR2 space: [mem 0x1f81f0000-0x1f820ffff 64bit pref] (contains BAR2 for 2 VFs) <6>[ 2.074305] pci 0000:00:00.1: [1957:e100] type 00 class 0x020001 <6>[ 2.080628] pci 0000:00:00.1: BAR 0: [mem 0x1f8040000-0x1f807ffff 64bit] (from Enhanced Allocation, properties 0x0) <6>[ 2.091370] pci 0000:00:00.1: BAR 2: [mem 0x1f8170000-0x1f817ffff 64bit pref] (from Enhanced Allocation, properties 0x1) <6>[ 2.102552] pci 0000:00:00.1: VF BAR 0: [mem 0x1f8210000-0x1f821ffff 64bit] (from Enhanced Allocation, properties 0x4) <6>[ 2.113553] pci 0000:00:00.1: VF BAR 2: [mem 0x1f8230000-0x1f823ffff 64bit pref] (from Enhanced Allocation, properties 0x3) <6>[ 2.125003] pci 0000:00:00.1: PME# supported from D0 D3hot <6>[ 2.130781] pci 0000:00:00.1: VF(n) BAR0 space: [mem 0x1f8210000-0x1f822ffff 64bit] (contains BAR0 for 2 VFs) <6>[ 2.140996] pci 0000:00:00.1: VF(n) BAR2 space: [mem 0x1f8230000-0x1f824ffff 64bit pref] (contains BAR2 for 2 VFs) <6>[ 2.151796] pci 0000:00:00.2: [1957:e100] type 00 class 0x020001 <6>[ 2.158111] pci 0000:00:00.2: BAR 0: [mem 0x1f8080000-0x1f80bffff 64bit] (from Enhanced Allocation, properties 0x0) <6>[ 2.159284] hub 3-1:1.0: USB hub found <6>[ 2.168853] pci 0000:00:00.2: BAR 2: [mem 0x1f8180000-0x1f818ffff 64bit pref] (from Enhanced Allocation, properties 0x1) <6>[ 2.168871] pci 0000:00:00.2: PME# supported from D0 D3hot <6>[ 2.172952] hub 3-1:1.0: 7 ports detected <6>[ 2.184157] pci 0000:00:00.3: [1957:ee01] type 00 class 0x088001 <6>[ 2.200408] pci 0000:00:00.3: BAR 0: [mem 0x1f8100000-0x1f811ffff 64bit] (from Enhanced Allocation, properties 0x0) <6>[ 2.211151] pci 0000:00:00.3: BAR 2: [mem 0x1f8190000-0x1f819ffff 64bit pref] (from Enhanced Allocation, properties 0x1) <6>[ 2.222339] pci 0000:00:00.3: PME# supported from D0 D3hot <6>[ 2.228234] pci 0000:00:00.4: [1957:ee02] type 00 class 0x088001 <6>[ 2.234556] pci 0000:00:00.4: BAR 0: [mem 0x1f8120000-0x1f813ffff 64bit] (from Enhanced Allocation, properties 0x0) <6>[ 2.245298] pci 0000:00:00.4: BAR 2: [mem 0x1f81a0000-0x1f81affff 64bit pref] (from Enhanced Allocation, properties 0x1) <6>[ 2.256484] pci 0000:00:00.4: PME# supported from D0 D3hot <6>[ 2.262356] pci 0000:00:00.5: [1957:eef0] type 00 class 0x020801 <6>[ 2.268670] pci 0000:00:00.5: BAR 0: [mem 0x1f8140000-0x1f815ffff 64bit] (from Enhanced Allocation, properties 0x0) <6>[ 2.279411] pci 0000:00:00.5: BAR 2: [mem 0x1f81b0000-0x1f81bffff 64bit pref] (from Enhanced Allocation, properties 0x1) <6>[ 2.290586] pci 0000:00:00.5: BAR 4: [mem 0x1fc000000-0x1fc3fffff 64bit] (from Enhanced Allocation, properties 0x0) <6>[ 2.301339] pci 0000:00:00.5: PME# supported from D0 D3hot <6>[ 2.307234] pci 0000:00:00.6: [1957:e100] type 00 class 0x020001 <6>[ 2.313550] pci 0000:00:00.6: BAR 0: [mem 0x1f80c0000-0x1f80fffff 64bit] (from Enhanced Allocation, properties 0x0) <6>[ 2.324294] pci 0000:00:00.6: BAR 2: [mem 0x1f81c0000-0x1f81cffff 64bit pref] (from Enhanced Allocation, properties 0x1) <6>[ 2.335484] pci 0000:00:00.6: PME# supported from D0 D3hot <6>[ 2.342011] pci 0000:00:1f.0: [1957:e001] type 00 class 0x080700 <6>[ 2.348342] OF: /soc/pcie@1f0000000: no msi-map translation for id 0xf8 on (null) <6>[ 2.356363] fsl_enetc 0000:00:00.0: Adding to iommu group 6 <6>[ 2.466592] fsl_enetc 0000:00:00.0: enabling device (0400 -> 0402) <6>[ 2.474010] fsl_enetc 0000:00:00.0: no MAC address specified for SI1, using ba:24:68:ce:3c:d1 <6>[ 2.482841] fsl_enetc 0000:00:00.0: no MAC address specified for SI2, using d2:5d:e3:33:a3:73 <6>[ 2.505556] fsl_enetc 0000:00:00.1: Adding to iommu group 7 <6>[ 2.511468] usb 3-1.6: new full-speed USB device number 3 using xhci-hcd <6>[ 2.618627] fsl_enetc 0000:00:00.1: enabling device (0400 -> 0402) <6>[ 2.626071] fsl_enetc 0000:00:00.1: no MAC address specified for SI1, using be:f4:1b:bb:70:94 <6>[ 2.634904] fsl_enetc 0000:00:00.1: no MAC address specified for SI2, using de:83:83:9b:78:d8 <6>[ 2.658698] fsl_enetc 0000:00:00.2: Adding to iommu group 8 <3>[ 2.673159] hid-generic 0003:064F:2AF9.0001: device has no listeners, quitting <6>[ 2.770598] fsl_enetc 0000:00:00.2: enabling device (0400 -> 0402) <6>[ 2.777465] fsl_enetc 0000:00:00.2: no MAC address specified for SI0, using 4e:e8:de:c9:1c:d0 <6>[ 2.787080] fsl_enetc_mdio 0000:00:00.3: Adding to iommu group 9 <6>[ 2.898619] fsl_enetc_mdio 0000:00:00.3: enabling device (0400 -> 0402) <6>[ 2.968543] fsl_enetc_ptp 0000:00:00.4: Adding to iommu group 10 <6>[ 2.975240] fsl_enetc_ptp 0000:00:00.4: enabling device (0404 -> 0406) <4>[ 2.982440] ptp_qoriq: device tree node missing required elements, try automatic configuration <6>[ 2.991784] pps pps0: new PPS source ptp0 <6>[ 2.997012] fsl_enetc 0000:00:00.6: Adding to iommu group 11 <6>[ 3.110611] fsl_enetc 0000:00:00.6: enabling device (0400 -> 0402) <6>[ 3.117968] fsl_enetc 0000:00:00.6: device is disabled, skipping <6>[ 3.124464] OF: /soc/pcie@1f0000000: no iommu-map translation for id 0xf8 on (null) <6>[ 3.132837] pcieport 0000:00:1f.0: PME: Signaling with IRQ 129 <6>[ 3.140505] layerscape-pcie 3400000.pcie: host bridge /soc/pcie@3400000 ranges: <6>[ 3.148240] layerscape-pcie 3400000.pcie: IO 0x8000010000..0x800001ffff -> 0x0000000000 <6>[ 3.157155] layerscape-pcie 3400000.pcie: MEM 0x8040000000..0x807fffffff -> 0x0040000000 <6>[ 3.166041] layerscape-pcie 3400000.pcie: iATU unroll: disabled <6>[ 3.172268] layerscape-pcie 3400000.pcie: Detected iATU regions: 8 outbound, 6 inbound <6>[ 3.180639] layerscape-pcie 3400000.pcie: PCI host bridge to bus 0001:00 <6>[ 3.187651] pci_bus 0001:00: root bus resource [bus 00-ff] <6>[ 3.193425] pci_bus 0001:00: root bus resource [io 0x0000-0xffff] <6>[ 3.199894] pci_bus 0001:00: root bus resource [mem 0x8040000000-0x807fffffff] (bus address [0x40000000-0x7fffffff]) <6>[ 3.210740] pci 0001:00:00.0: [1957:82c1] type 01 class 0x060400 <6>[ 3.217090] pci 0001:00:00.0: supports D1 D2 <6>[ 3.221638] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot <6>[ 3.229438] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 <6>[ 3.236359] pci 0001:00:00.0: PCI bridge to [bus 01] <6>[ 3.241705] pcieport 0001:00:00.0: Adding to iommu group 12 <6>[ 3.247713] pcieport 0001:00:00.0: PME: Signaling with IRQ 33 <6>[ 3.254177] layerscape-pcie 3500000.pcie: host bridge /soc/pcie@3500000 ranges: <6>[ 3.261805] layerscape-pcie 3500000.pcie: IO 0x8800010000..0x880001ffff -> 0x0000000000 <6>[ 3.270634] layerscape-pcie 3500000.pcie: MEM 0x8840000000..0x887fffffff -> 0x0040000000 <6>[ 3.279486] layerscape-pcie 3500000.pcie: iATU unroll: disabled <6>[ 3.285690] layerscape-pcie 3500000.pcie: Detected iATU regions: 8 outbound, 6 inbound <6>[ 3.293981] layerscape-pcie 3500000.pcie: PCI host bridge to bus 0002:00 <6>[ 3.300978] pci_bus 0002:00: root bus resource [bus 00-ff] <6>[ 3.306748] pci_bus 0002:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff]) <6>[ 3.316005] pci_bus 0002:00: root bus resource [mem 0x8840000000-0x887fffffff] (bus address [0x40000000-0x7fffffff]) <6>[ 3.326850] pci 0002:00:00.0: [1957:82c1] type 01 class 0x060400 <6>[ 3.333195] pci 0002:00:00.0: supports D1 D2 <6>[ 3.337742] pci 0002:00:00.0: PME# supported from D0 D1 D2 D3hot <6>[ 3.345418] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01 <6>[ 3.352330] pci 0002:00:00.0: PCI bridge to [bus 01] <6>[ 3.357666] pcieport 0002:00:00.0: Adding to iommu group 13 <6>[ 3.363677] pcieport 0002:00:00.0: PME: Signaling with IRQ 35 <6>[ 3.370303] 2270000.serial: ttyLP2 at MMIO 0x2270000 (irq = 25, base_baud = 12500000) is a FSL_LPUART <6>[ 3.386107] input: buttons0 as /devices/platform/buttons0/input/input0 <6>[ 3.456496] fsl_enetc 0000:00:00.0 eth0: PHY [0000:00:00.0:05] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL) <6>[ 3.484389] fsl_enetc 0000:00:00.0 eth0: configuring for inband/sgmii link mode <6>[ 3.556898] fsl_enetc 0000:00:00.1 eth1: PHY [0000:00:00.1:04] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL) <6>[ 3.595518] fsl_enetc 0000:00:00.1 eth1: configuring for phy/rgmii-id link mode <6>[ 3.619624] fsl_enetc 0000:00:00.2 eth2: configuring for fixed/internal link mode <6>[ 3.627488] fsl_enetc 0000:00:00.2 eth2: Link is Up - 2.5Gbps/Full - flow control off <5>[ 3.654565] Sending DHCP requests .. <6>[ 6.543509] fsl_enetc 0000:00:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx <4>[ 10.146587] ., OK <6>[ 10.164844] IP-Config: Got DHCP answer from 172.16.0.254, my address is 172.16.0.69 <6>[ 10.172866] IP-Config: Complete: <6>[ 10.176401] device=eth0, hwaddr=00:a0:a5:5c:6c:72, ipaddr=172.16.0.69, mask=255.255.255.0, gw=172.16.0.254 <6>[ 10.186837] host=172.16.0.69, domain=lava.lan, nis-domain=(none) <6>[ 10.193593] bootserver=0.0.0.0, rootserver=0.0.0.0, rootpath= <6>[ 10.193611] nameserver0=8.8.8.8 <6>[ 10.227544] fsl_enetc 0000:00:00.2 eth2: Link is Down <6>[ 10.255946] clk: Disabling unused clocks <6>[ 10.260225] ALSA device list: <6>[ 10.263479] No soundcards found. <6>[ 10.268176] Freeing unused kernel memory: 1600K <6>[ 10.273187] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 10.331455] udevd[102]: starting version 3.2.9 <5>[ 10.336727] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 10.343678] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 10.350487] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 10.360026] udevd[102]: specified user 'tss' unknown <27>[ 10.365445] udevd[102]: specified group 'tss' unknown <30>[ 10.371849] udevd[103]: starting eudev-3.2.9 <6>[ 10.576226] EDAC MC0: Giving out device to module fsl_ddr_edac controller fsl_mc_err: DEV fsl_mc_err (INTERRUPT) <6>[ 10.589579] fsl_ddr_edac acquired irq 15 for MC <6>[ 10.594425] fsl_ddr_edac MC err registered <6>[ 10.598914] fsl_enetc 0000:00:00.1 enp0s0f1: renamed from eth1 <6>[ 10.634794] fsl_enetc 0000:00:00.2 enp0s0f2: renamed from eth2 <4>[ 10.641883] rtc-rv8803 0-0032: Voltage low, temperature compensation stopped. <27>[ 10.649661] udevd[116]: Error changing net interface name eth0 to enp0s0f0: Device or resource busy <6>[ 10.649882] NET: Registered PF_INET6 protocol family <4>[ 10.661429] rtc-rv8803 0-0032: Voltage low, data loss detected. <4>[ 10.674445] rtc-rv8803 0-0032: Voltage low, data is invalid. <6>[ 10.680550] rtc-rv8803 0-0032: registered as rtc0 <4>[ 10.689120] rtc-rv8803 0-0032: Voltage low, data is invalid. <3>[ 10.695544] rtc-rv8803 0-0032: hctosys: unable to read the hardware clock <28>[ 10.703984] udevd[116]: could not rename interface '2' from 'eth0' to 'enp0s0f0': Device or resource busy <6>[ 10.711338] mali-dp f080000.display: Adding to iommu group 14 <4>[ 10.720228] at24 0-0050: supply vcc not found, using dummy regulator <6>[ 10.721209] Segment Routing with IPv6 <6>[ 10.738938] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 32 bytes/write <6>[ 10.741901] In-situ OAM (IOAM) with IPv6 <6>[ 10.750368] sl28cpld-wdt 2000000.i2c:sl28cpld@4a:watchdog@4: initial timeout 6 sec <4>[ 10.760866] at24 1-0057: supply vcc not found, using dummy regulator <6>[ 10.768505] mscc_felix 0000:00:00.5: Adding to iommu group 15 <6>[ 10.778526] CAN device driver interface <6>[ 10.785004] at24 1-0057: 4096 byte 24c32 EEPROM, writable, 32 bytes/write <6>[ 10.785975] mscc_felix 0000:00:00.5: enabling device (0400 -> 0402) <4>[ 10.793557] at24 2-0050: supply vcc not found, using dummy regulator <6>[ 10.808203] at24 2-0050: 4096 byte 24c32 EEPROM, writable, 32 bytes/write <6>[ 10.851244] ftm-alarm 2800000.timer: registered as rtc1 <6>[ 10.888423] caam 8000000.crypto: device ID = 0x0a12070000000000 (Era 10) <6>[ 10.906665] caam 8000000.crypto: job rings = 4, qi = 0 <6>[ 10.934946] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 0 <6>[ 10.942303] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 1 <6>[ 10.950288] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 2 <6>[ 10.958048] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 3 <6>[ 11.002238] caam_jr 8010000.jr: Adding to iommu group 16 <6>[ 11.008162] caam algorithms registered in /proc/crypto <6>[ 11.013659] caam 8000000.crypto: registering rng-caam <6>[ 11.019238] caam_jr 8020000.jr: Adding to iommu group 17 <6>[ 11.025218] caam_jr 8030000.jr: Adding to iommu group 18 <6>[ 11.031157] caam_jr 8040000.jr: Adding to iommu group 19 <6>[ 11.061722] mscc_felix 0000:00:00.5 swp0 (uninitialized): PHY [0000:00:00.3:07] driver [Broadcom BCM54140] (irq=POLL) <5>[ 11.079297] random: crng init done <5>[ 11.082989] random: 2 urandom warning(s) missed due to ratelimiting <6>[ 11.138125] mscc_felix 0000:00:00.5 swp1 (uninitialized): PHY [0000:00:00.3:08] driver [Broadcom BCM54140] (irq=POLL) <6>[ 11.214151] mscc_felix 0000:00:00.5 swp2 (uninitialized): PHY [0000:00:00.3:09] driver [Broadcom BCM54140] (irq=POLL) <6>[ 11.266199] mscc_felix 0000:00:00.5 swp3 (uninitialized): PHY [0000:00:00.3:0a] driver [Broadcom BCM54140] (irq=POLL) <6>[ 11.288991] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode <6>[ 11.296547] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control off <6>[ 11.296751] device enp0s0f2 entered promiscuous mode <6>[ 11.309732] DSA: tree 0 setup done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-514071/environment . /lava-514071/environment / # /lava-514071/bin/lava-test-runner /lava-514071/0 /lava-514071/bin/lava-test-runner /lava-514071/0 + export 'TESTRUN_ID=0_dmesg' + c<8>[ 11.913042] d /lava-514071/0/tests/0_dmesg + cat uuid + UUID=514071_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 11.933226] <8>[ 11.953261] <8>[ 11.973347] + set +x <8>[ 11.983070] / # <3>[�