Trying 192.168.56.21... Connected to conserv1. Escape character is '^]'. ser2net port telnet,3004 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.2.2:1.0-port0, 115200n81, local=false [] (Debian GNU/Linux) U-Boot SPL 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43) U-Boot 2015.10-00061-g68849f9 (Jan 08 2016 - 17:01:43 +0100) CPU: Freescale i.MX6DL rev1.1 at 792 MHz Reset cause: POR Board: UDOO DualLite DRAM: 1 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: using phy at 6 FEC [PRIME] Hit any key to stop autoboot: 3  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp FEC Waiting for PHY auto negotiation to complete....... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.6.14 (784 ms) => setenv serverip 192.168.6.2 setenv serverip 192.168.6.2 => tftp 0x12000000 941343/tftp-deploy-7j5ez6ws/kernel/zImage tftp 0x12000000 941343/tftp-deploy-7j5ez6ws/kernel/zImage Using FEC device TFTP from server 192.168.6.2; our IP address is 192.168.6.14 Filename '941343/tftp-deploy-7j5ez6ws/kernel/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# 8.9 MiB/s done Bytes transferred = 11440640 (ae9200 hex) => tftp 0x13000000 941343/tftp-deploy-7j5ez6ws/ramdisk/ramdisk.cpio.gz.uboot tftp 0x13000000 941343/tftp-deploy-7j5ez6ws/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 192.168.6.2; our IP address is 192.168.6.14 Filename '941343/tftp-deploy-7j5ez6ws/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x13000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###################################################### 9.1 MiB/s done Bytes transferred = 17961744 (1121310 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x18000000 941343/tftp-deploy-7j5ez6ws/dtb/imx6dl-udoo.dtb tftp 0x18000000 941343/tftp-deploy-7j5ez6ws/dtb/imx6dl-udoo.dtb Using FEC device TFTP from server 192.168.6.2; our IP address is 192.168.6.14 Filename '941343/tftp-deploy-7j5ez6ws/dtb/imx6dl-udoo.dtb'. Load address: 0x18000000 Loading: *### 5.6 MiB/s done Bytes transferred = 35145 (8949 hex) => setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x12000000 0x13000000 0x18000000 bootz 0x12000000 0x13000000 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0xae9200 ] ## Loading init Ramdisk from Legacy Image at 13000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 17961680 Bytes = 17.1 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800b948 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.0-rc2 (KernelCI@build-j363583-arm-gcc-12-multi-v7-defconfig-fl4l5) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Tue Nov 5 17:30:01 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Udoo i.MX6 Dual-lite Board [ 0.000000] earlycon: ec_imx21 at MMIO 0x021e8000 (options '') [ 0.000000] printk: legacy bootconsole [ec_imx21] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x4c000000 on node -1 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] [ 0.000000] percpu: Embedded 17 pages/cpu s40844 r8192 d20596 u69632 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 <6>[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] trace event string verifier disabled <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 erratum 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 <6>[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.008440] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.021818] Console: colour dummy device 80x30 <6>[ 0.023739] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.034143] CPU: Testing write buffer coherency: ok <6>[ 0.039269] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.044563] pid_max: default: 32768 minimum: 301 <6>[ 0.049594] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.057028] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.065959] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.072273] Setting up static identity map for 0x10300000 - 0x103000ac <6>[ 0.079234] rcu: Hierarchical SRCU implementation. <6>[ 0.082755] rcu: Max phase no-delay instances is 1000. <6>[ 0.088694] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.099398] EFI services will not be available. <6>[ 0.101651] smp: Bringing up secondary CPUs ... <6>[ 0.107276] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.107300] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.117582] smp: Brought up 1 node, 2 CPUs <6>[ 0.121731] SMP: Total of 2 processors activated (12.00 BogoMIPS). <6>[ 0.128200] CPU: All CPU(s) started in SVC mode. <6>[ 0.133579] Memory: 923716K/1048576K available (16384K kernel code, 2542K rwdata, 6784K rodata, 2048K init, 431K bss, 56432K reserved, 65536K cma-reserved, 196608K highmem) <6>[ 0.149324] devtmpfs: initialized <6>[ 0.159452] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.164795] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.174720] futex hash table entries: 512 (order: 3, 32768 bytes, linear) <6>[ 0.184822] pinctrl core: initialized pinctrl subsystem <6>[ 0.190942] DMI not present or invalid. <6>[ 0.193184] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.200874] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.208525] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.208619] cpuidle: using governor menu <6>[ 0.216601] CPU identified as i.MX6DL, silicon rev 1.1 <6>[ 0.230030] platform soc: Fixed dependency cycle(s) with /soc/bus@2000000/gpc@20dc000 <6>[ 0.236382] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 <4>[ 0.252322] mxs_phy 20c9000.usbphy: supply phy-3p0 not found, using dummy regulator <4>[ 0.258168] mxs_phy 20ca000.usbphy: supply phy-3p0 not found, using dummy regulator <6>[ 0.267778] platform 20dc000.gpc: Fixed dependency cycle(s) with /soc/bus@2000000/clock-controller@20c4000 <6>[ 0.276948] platform 20e0000.iomuxc-gpr:ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.285167] platform 20e0000.iomuxc-gpr:ipu1_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.300803] platform 20e0000.iomuxc-gpr:ipu1_csi1_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.307673] platform 20e0000.iomuxc-gpr:ipu1_csi0_mux: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.317226] platform 120000.hdmi: Fixed dependency cycle(s) with /soc/ipu@2400000 <6>[ 0.324937] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/hdmi@120000 <6>[ 0.332704] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi1_mux <6>[ 0.343312] platform 2400000.ipu: Fixed dependency cycle(s) with /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux <6>[ 0.357283] No ATAGs? <6>[ 0.357439] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.365239] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 0.374138] imx6dl-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver <6>[ 0.385699] Serial: AMBA PL011 UART driver <4>[ 0.398268] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.406758] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.415754] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.424784] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.434034] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.443194] gpio gpiochip5: Static allocation of GPIO base is deprecated, use dynamic allocation. <4>[ 0.452351] gpio gpiochip6: Static allocation of GPIO base is deprecated, use dynamic allocation. <6>[ 0.470257] iommu: Default domain type: Translated <6>[ 0.472470] iommu: DMA domain TLB invalidation policy: strict mode <5>[ 0.486639] SCSI subsystem initialized <6>[ 0.488429] usbcore: registered new interface driver usbfs <6>[ 0.493578] usbcore: registered new interface driver hub <6>[ 0.499203] usbcore: registered new device driver usb <4>[ 0.504697] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests (id=vbus) <4>[ 0.513970] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests (id=vbus) <6>[ 0.524850] i2c i2c-1: IMX I2C adapter registered <6>[ 0.528754] i2c i2c-2: IMX I2C adapter registered <6>[ 0.534143] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.538225] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.547619] PTP clock support registered <6>[ 0.551970] EDAC MC: Ver: 3.0.0 <6>[ 0.555777] scmi_core: SCMI protocol bus registered <6>[ 0.563292] vgaarb: loaded <6>[ 0.568785] clocksource: Switched to clocksource mxc_timer1 <6>[ 0.587576] NET: Registered PF_INET protocol family <6>[ 0.590168] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 0.599410] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) <6>[ 0.606160] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.614187] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 0.622246] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) <6>[ 0.629881] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 0.636360] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.643188] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) <6>[ 0.650674] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 0.659300] RPC: Registered named UNIX socket transport module. <6>[ 0.662646] RPC: Registered udp transport module. <6>[ 0.667602] RPC: Registered tcp transport module. <6>[ 0.672610] RPC: Registered tcp-with-tls transport module. <6>[ 0.678304] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.685037] PCI: CLS 0 bytes, default 64 <5>[ 0.690948] Initialise system trusted keyrings <6>[ 0.694451] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <6>[ 0.701012] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 0.707168] Trying to unpack rootfs image as initramfs... <5>[ 0.741312] NFS: Registering the id_resolver key type <5>[ 0.743861] Key type id_resolver registered <5>[ 0.748240] Key type id_legacy registered <6>[ 0.752693] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 0.759504] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <5>[ 0.789890] Key type asymmetric registered <5>[ 0.791411] Asymmetric key parser 'x509' registered <6>[ 0.796637] bounce: pool size: 64 pages <6>[ 0.800761] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 0.808290] io scheduler mq-deadline registered <6>[ 0.813118] io scheduler kyber registered <6>[ 0.817369] io scheduler bfq registered <6>[ 0.927088] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 0.975235] mxs-dma 110000.dma-controller: initialized <6>[ 1.423187] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled <6>[ 1.444074] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 267, base_baud = 5000000) is a IMX <6>[ 1.450310] printk: legacy console [ttymxc1] enabled <6>[ 1.450310] printk: legacy console [ttymxc1] enabled <6>[ 1.460663] printk: legacy bootconsole [ec_imx21] disabled <6>[ 1.460663] printk: legacy bootconsole [ec_imx21] disabled <6>[ 1.513700] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 268, base_baud = 5000000) is a IMX <6>[ 1.541230] msm_serial: driver initialized <6>[ 1.546337] SuperH (H)SCI(F) driver initialized <6>[ 1.551834] STMicroelectronics ASC driver initialized <6>[ 1.557508] STM32 USART driver initialized <6>[ 1.638827] brd: module loaded <6>[ 1.651370] loop: module loaded <6>[ 1.693018] CAN device driver interface <6>[ 1.699032] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 1.707258] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 1.712600] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.718920] igb: Intel(R) Gigabit Ethernet Network Driver <6>[ 1.724607] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.737811] pegasus: Pegasus/Pegasus II USB Ethernet driver <6>[ 1.743816] usbcore: registered new interface driver pegasus <6>[ 1.749875] usbcore: registered new interface driver asix <6>[ 1.755621] usbcore: registered new interface driver ax88179_178a <6>[ 1.762109] usbcore: registered new interface driver cdc_ether <6>[ 1.768283] usbcore: registered new interface driver smsc75xx <6>[ 1.774458] usbcore: registered new interface driver smsc95xx <6>[ 1.780591] usbcore: registered new interface driver net1080 <6>[ 1.786585] usbcore: registered new interface driver cdc_subset <6>[ 1.792871] usbcore: registered new interface driver zaurus <6>[ 1.798800] usbcore: registered new interface driver cdc_ncm <6>[ 1.811132] usbcore: registered new interface driver usb-storage <4>[ 1.820283] imx_usb 2184000.usb: No over current polarity defined <6>[ 2.442348] Freeing initrd memory: 17544K <6>[ 2.446947] imx-sdma 20ec000.dma-controller: external firmware not found, using ROM firmware <3>[ 2.461769] mxs_phy 20c9000.usbphy: Data pin can't make good contact. <4>[ 2.469252] imx_usb 2184200.usb: No over current polarity defined <6>[ 2.480070] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 2.485252] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 2.508791] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 2.515501] hub 1-0:1.0: USB hub found <6>[ 2.519661] hub 1-0:1.0: 1 port detected <6>[ 2.533351] i2c_dev: i2c /dev entries driver <6>[ 2.561444] sdhci: Secure Digital Host Controller Interface driver <6>[ 2.567907] sdhci: Copyright(c) Pierre Ossman <6>[ 2.575338] Synopsys Designware Multimedia Card Interface Driver <6>[ 2.584023] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 2.596766] usbcore: registered new interface driver usbhid <6>[ 2.599640] sdhci-esdhc-imx 2198000.mmc: Got CD GPIO <6>[ 2.602694] usbhid: USB HID core driver <4>[ 2.619170] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. <6>[ 2.627803] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 (8000003f) counters available <6>[ 2.641796] NET: Registered PF_INET6 protocol family <6>[ 2.658883] Segment Routing with IPv6 <6>[ 2.662931] In-situ OAM (IOAM) with IPv6 <6>[ 2.667227] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 2.669093] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA <6>[ 2.674217] NET: Registered PF_PACKET protocol family <6>[ 2.685947] can: controller area network core <6>[ 2.690659] NET: Registered PF_CAN protocol family <6>[ 2.695730] can: raw protocol <6>[ 2.698995] can: broadcast manager protocol <6>[ 2.703459] can: netlink gateway - max_hops=1 <5>[ 2.708603] Key type dns_resolver registered <6>[ 2.715441] ThumbEE CPU extension supported. <4>[ 2.717038] mmc2: host does not support reading read-only switch, assuming write-enable <5>[ 2.720048] Registering SWP/SWPB emulation handler <5>[ 2.734242] Loading compiled-in X.509 certificates <6>[ 2.735533] mmc2: new high speed SDXC card at address 59b4 <6>[ 2.746694] mmcblk2: mmc2:59b4 SD128 119 GiB <6>[ 2.755038] mmcblk2: p1 p2 <6>[ 2.764181] pps pps0: new PPS source ptp0 <6>[ 2.788894] usb 1-1: new full-speed USB device number 2 using ci_hdrc <6>[ 2.824474] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 2.832981] imx_thermal 20c8000.anatop:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C <6>[ 2.922225] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:06: attached PHY driver (mii_bus:phy_addr=2188000.ethernet-1:06, irq=POLL) <3>[ 3.018855] usb 1-1: device descriptor read/64, error -71 <3>[ 3.348869] usb 1-1: device descriptor read/64, error -71 <6>[ 3.588865] usb 1-1: new full-speed USB device number 3 using ci_hdrc <3>[ 3.818840] usb 1-1: device descriptor read/64, error -71 <3>[ 4.148864] usb 1-1: device descriptor read/64, error -71 <6>[ 4.258931] usb usb1-port1: attempt power cycle <6>[ 4.678844] usb 1-1: new full-speed USB device number 4 using ci_hdrc <3>[ 5.158838] usb 1-1: device not accepting address 4, error -71 <6>[ 5.288903] usb 1-1: new full-speed USB device number 5 using ci_hdrc <3>[ 5.768875] usb 1-1: device not accepting address 5, error -71 <3>[ 5.775131] usb usb1-port1: unable to enumerate USB device <6>[ 6.019571] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <5>[ 6.048808] Sending DHCP requests ., OK <6>[ 6.093098] IP-Config: Got DHCP answer from 192.168.6.1, my address is 192.168.6.14 <6>[ 6.101174] IP-Config: Complete: <6>[ 6.104689] device=eth0, hwaddr=00:c0:08:88:29:80, ipaddr=192.168.6.14, mask=255.255.255.0, gw=192.168.6.1 <6>[ 6.115128] host=192.168.6.14, domain=, nis-domain=(none) <6>[ 6.121289] bootserver=192.168.6.1, rootserver=192.168.6.1, rootpath= <6>[ 6.121312] nameserver0=10.255.253.1 <6>[ 6.133190] clk: Disabling unused clocks <6>[ 6.137829] PM: genpd: Disabling unused power domains <6>[ 6.147740] Freeing unused kernel image (initmem) memory: 2048K <6>[ 6.154670] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 6.304126] udevd[93]: starting version 3.2.9 <5>[ 11.878785] random: crng init done <27>[ 11.890622] udevd[93]: specified user 'tss' unknown <27>[ 11.896003] udevd[93]: specified group 'tss' unknown <30>[ 11.904511] udevd[94]: starting eudev-3.2.9 <6>[ 12.505363] imx-ipuv3 2400000.ipu: IPUv3H probed <6>[ 12.547968] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) <6>[ 12.612263] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) <6>[ 12.619290] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) <6>[ 12.715104] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 <6>[ 12.764844] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 <4>[ 12.776322] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW <6>[ 12.796282] [drm] Initialized etnaviv 1.4.0 for etnaviv on minor 0 <6>[ 12.822360] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops 0xbf009388) <6>[ 12.830137] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops 0xbf009388) <6>[ 12.837711] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx]) <6>[ 12.867184] [drm] Initialized imx-drm 1.0.0 for display-subsystem on minor 1 <6>[ 12.874680] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 12.882677] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes <6>[ 12.951174] caam 2100000.crypto: Entropy delay = 3200 <6>[ 12.969017] caam 2100000.crypto: Instantiated RNG4 SH0 <6>[ 12.981491] caam 2100000.crypto: Instantiated RNG4 SH1 <6>[ 12.986912] caam 2100000.crypto: device ID = 0x0a16010000000100 (Era 4) <6>[ 12.993838] caam 2100000.crypto: job rings = 2, qi = 0 <6>[ 13.060927] usbcore: registered new device driver onboard-usb-dev <4>[ 13.075647] onboard-usb-dev 2184200.usb:usb-port@1: supply vdd not found, using dummy regulator <6>[ 13.408842] usb 1-1: new high-speed USB device number 6 using ci_hdrc <6>[ 13.612875] hub 1-1:1.0: USB hub found <6>[ 13.621296] hub 1-1:1.0: 4 ports detected <6>[ 13.632696] caam algorithms registered in /proc/crypto <6>[ 13.638376] caam 2100000.crypto: registering rng-caam <6>[ 13.644599] caam 2100000.crypto: rng crypto API alg registered prng-caam done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # <6>[ 13.918870] usb 1-1.3: new high-speed USB device number 7 using ci_hdrc / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-941343/environment . /lava-941343/environment / # /lava-941343/bin/lava-test-runner /lava-941343/0 /lava-941343/bin/lava-test-runner /lava-941343/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-941343/0/tests/0_dmesg + cat uuid <8>[ 14.440994] + UUID=941343_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 14.488949] <8>[ 14.532987] <8>[ 14.577750] + set +x <8>[ 14.588931] / #