connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 i.MX6 Solo unique ID: 132c61d4d72d78a9 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2194000.mmc@2194000.of: registered as mmc1 imx-esdhc 2198000.mmc@2198000.of: registered as mmc2 imx-esdhc 219c000.mmc@219c000.of: registered as mmc3 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fe7b320 -> 0x4fcf663f (size 510.5 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/911039/tftp-deploy-me0py3a9/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/911039/tftp-deploy-me0py3a9/dtb/imx6dl-riotboard.dtb /mnt/tftp/911039/tftp-deploy-me0py3a9/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/911039/tftp-deploy-me0py3a9/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/911039/tftp-deploy-me0py3a9/dtb/imx6dl-riotboard.dtb /mnt/tftp/911039/tftp-deploy-me0py3a9/kernel/zImage [1;33mWARNING:[0m eth0: No MAC address set. Using random address be:18:46:b4:54:a2 eth0: 1000Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.190 Loading ARM Linux zImage '/mnt/tftp/911039/tftp-deploy-me0py3a9/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x1289a000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/911039/tftp-deploy-me0py3a9/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x188d679c Loading devicetree from '/mnt/tftp/911039/tftp-deploy-me0py3a9/dtb/imx6dl-riotboard.dtb' commandline: console=ttymxc1,115200n8 Starting kernel at 0x1289a000, initrd at 0x18000000, oftree at 0x188d7000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.273-cip91 (KernelCI@build-j1086133-arm-gcc-10-imx-v6-v7-defconfig-b6fnh) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Wed Feb 22 18:53:09 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: RIoTboard i.MX6S [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 64 MiB at 0x4a000000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 17 pages/cpu s37928 r8192 d23512 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 938696K/1048576K available (11264K kernel code, 880K rwdata, 3616K rodata, 1024K init, 7651K bss, 44344K reserved, 65536K cma-reserved, 195512K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 881 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7652 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000037] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001559] Console: colour dummy device 80x30 [ 0.001598] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001616] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001633] ... MAX_LOCK_DEPTH: 48 [ 0.001650] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001666] ... CLASSHASH_SIZE: 4096 [ 0.001683] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001698] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001716] ... CHAINHASH_SIZE: 32768 [ 0.001733] memory used by lock dependency info: 4655 kB [ 0.001748] per task-struct memory footprint: 1536 bytes [ 0.001843] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.001873] pid_max: default: 32768 minimum: 301 [ 0.002258] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002297] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.005180] CPU: Testing write buffer coherency: ok [ 0.005267] CPU0: Spectre v2: using BPIALL workaround [ 0.006617] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.008825] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.009403] rcu: Hierarchical SRCU implementation. [ 0.011087] smp: Bringing up secondary CPUs ... [ 0.011115] smp: Brought up 1 node, 1 CPU [ 0.011137] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.011158] CPU: All CPU(s) started in SVC mode. [ 0.013571] devtmpfs: initialized [ 0.036389] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.037187] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.037254] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.040055] pinctrl core: initialized pinctrl subsystem [ 0.045269] NET: Registered protocol family 16 [ 0.065396] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.068338] cpuidle: using governor menu [ 0.068569] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.086274] vdd1p1: supplied by regulator-dummy [ 0.087847] vdd3p0: supplied by regulator-dummy [ 0.089103] vdd2p5: supplied by regulator-dummy [ 0.090439] vddarm: supplied by regulator-dummy [ 0.092167] vddpu: supplied by regulator-dummy [ 0.093047] vddsoc: supplied by regulator-dummy [ 0.115148] No ATAGs? [ 0.115421] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.115515] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.117989] imx6dl-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.119018] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.180891] mxs-dma 110000.dma-apbh: initialized [ 0.186581] vgaarb: loaded [ 0.187560] SCSI subsystem initialized [ 0.188856] usbcore: registered new interface driver usbfs [ 0.189068] usbcore: registered new interface driver hub [ 0.189182] usbcore: registered new device driver usb [ 0.192945] i2c i2c-0: IMX I2C adapter registered [ 0.192992] i2c i2c-0: can't use DMA, using PIO instead. [ 0.194073] i2c i2c-1: IMX I2C adapter registered [ 0.194115] i2c i2c-1: can't use DMA, using PIO instead. [ 0.195121] i2c i2c-3: IMX I2C adapter registered [ 0.195163] i2c i2c-3: can't use DMA, using PIO instead. [ 0.195349] media: Linux media interface: v0.10 [ 0.195466] videodev: Linux video capture interface: v2.00 [ 0.195936] pps_core: LinuxPPS API ver. 1 registered [ 0.195960] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.196018] PTP clock support registered [ 0.196829] Advanced Linux Sound Architecture Driver Initialized. [ 0.200268] Bluetooth: Core ver 2.22 [ 0.200397] NET: Registered protocol family 31 [ 0.200420] Bluetooth: HCI device and connection manager initialized [ 0.200545] Bluetooth: HCI socket layer initialized [ 0.200581] Bluetooth: L2CAP socket layer initialized [ 0.200772] Bluetooth: SCO socket layer initialized [ 0.202828] clocksource: Switched to clocksource mxc_timer1 [ 0.421520] VFS: Disk quotas dquot_6.6.0 [ 0.421683] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.446833] NET: Registered protocol family 2 [ 0.447427] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.449874] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) [ 0.449996] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.450154] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.451164] TCP: Hash tables configured (established 8192 bind 8192) [ 0.451820] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.452004] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.452557] NET: Registered protocol family 1 [ 0.454673] RPC: Registered named UNIX socket transport module. [ 0.454753] RPC: Registered udp transport module. [ 0.454776] RPC: Registered tcp transport module. [ 0.454797] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.457286] Trying to unpack rootfs image as initramfs... [ 1.429947] Freeing initrd memory: 9052K [ 1.431687] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.435967] Initialise system trusted keyrings [ 1.436769] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 1.452476] NFS: Registering the id_resolver key type [ 1.452660] Key type id_resolver registered [ 1.452824] Key type id_legacy registered [ 1.453019] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.454516] fuse init (API version 7.27) [ 1.469008] Key type asymmetric registered [ 1.469218] Asymmetric key parser 'x509' registered [ 1.469503] bounce: pool size: 64 pages [ 1.469634] io scheduler noop registered [ 1.469660] io scheduler deadline registered [ 1.469985] io scheduler cfq registered (default) [ 1.470012] io scheduler mq-deadline registered [ 1.470033] io scheduler kyber registered [ 1.487943] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.488226] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.490744] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 1.491264] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 1.491487] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 1.491897] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 1.492403] PU : no governor for states [ 1.492464] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 1.496316] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1 [ 1.497192] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 [ 1.497218] pfuze100-regulator 0-0008: pfuze100 found. [ 1.521787] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 25, base_baud = 5000000) is a IMX [ 1.525062] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 68, base_baud = 5000000) is a IMX [ 2.427008] console [ttymxc1] enabled [ 2.432564] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 69, base_baud = 5000000) is a IMX [ 2.443113] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 70, base_baud = 5000000) is a IMX [ 2.453477] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 71, base_baud = 5000000) is a IMX [ 2.479106] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 2.485587] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 2.491194] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 [ 2.509832] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 2.530711] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 [ 2.542592] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.549421] [drm] No driver support for vblank timestamp query. [ 2.557065] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.564939] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.573575] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) [ 2.589091] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 2.597639] [drm] Cannot find any crtc or sizes [ 2.605283] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.613351] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.641759] brd: module loaded [ 2.669879] loop: module loaded [ 2.682158] CAN device driver interface [ 2.689175] fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator [ 2.698151] fec 2188000.ethernet: Linked as a consumer to regulator.0 [ 2.708194] pps pps0: new PPS source ptp0 [ 2.750457] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.758109] usbcore: registered new interface driver asix [ 2.763852] usbcore: registered new interface driver ax88179_178a [ 2.770049] usbcore: registered new interface driver cdc_ether [ 2.776134] usbcore: registered new interface driver net1080 [ 2.781890] usbcore: registered new interface driver cdc_subset [ 2.788045] usbcore: registered new interface driver zaurus [ 2.793850] usbcore: registered new interface driver cdc_ncm [ 2.799530] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.806128] ehci-pci: EHCI PCI platform driver [ 2.810678] ehci-mxc: Freescale On-Chip EHCI Host driver [ 2.816900] usbcore: registered new interface driver usb-storage [ 2.826882] imx_usb 2184000.usb: Linked as a consumer to regulator.9 [ 2.842854] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 2.851273] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 2.861315] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.866788] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 2.902882] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.912645] hub 1-0:1.0: USB hub found [ 2.916863] hub 1-0:1.0: 1 port detected [ 2.933174] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 2.939623] i2c /dev entries driver [ 2.953728] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 2.960398] Bluetooth: HCI UART driver ver 2.3 [ 2.964949] Bluetooth: HCI UART protocol H4 registered [ 2.970631] Bluetooth: HCI UART protocol LL registered [ 2.977388] sdhci: Secure Digital Host Controller Interface driver [ 2.983651] sdhci: Copyright(c) Pierre Ossman [ 2.988023] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.995343] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 3.000579] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 3.006171] sdhci-esdhc-imx 2194000.usdhc: Linked as a consumer to regulator.8 [ 3.049106] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 3.059237] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 3.064839] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO [ 3.070318] sdhci-esdhc-imx 2198000.usdhc: Linked as a consumer to regulator.8 [ 3.111517] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.121576] sdhci-esdhc-imx 219c000.usdhc: Linked as a consumer to regulator.8 [ 3.162638] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA [ 3.179318] caam 2100000.caam: Entropy delay = 3200 [ 3.245159] caam 2100000.caam: Instantiated RNG4 SH0 [ 3.305923] caam 2100000.caam: Instantiated RNG4 SH1 [ 3.310917] caam 2100000.caam: device ID = 0x0a16010000000100 (Era 4) [ 3.317427] caam 2100000.caam: job rings = 2, qi = 0 [ 3.322543] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.357001] caam algorithms registered in /proc/crypto [ 3.370146] caam_jr 2101000.jr0: registering rng-caam [ 3.381404] usbcore: registered new interface driver usbhid [ 3.387249] usbhid: USB HID core driver [ 3.395776] mmc2: new DDR MMC card at address 0001 [ 3.407612] imx-media: subdev ipu1_vdic bound [ 3.412330] imx-media: subdev ipu2_vdic bound [ 3.419584] mmcblk2: mmc2:0001 MMC04G 3.58 GiB [ 3.425982] mmcblk2boot0: mmc2:0001 MMC04G partition 1 2.00 MiB [ 3.433462] imx-media: subdev ipu1_ic_prp bound [ 3.439781] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0 [ 3.447897] mmcblk2boot1: mmc2:0001 MMC04G partition 2 2.00 MiB [ 3.455096] imx-media: subdev ipu1_ic_prpenc bound [ 3.460899] mmcblk2rpmb: mmc2:0001 MMC04G partition 3 128 KiB, chardev (244:0) [ 3.468331] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1 [ 3.478999] imx-media: subdev ipu1_ic_prpvf bound [ 3.488039] imx-media: subdev ipu2_ic_prp bound [ 3.499585] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2 [ 3.509338] imx-media: subdev ipu2_ic_prpenc bound [ 3.514984] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3 [ 3.521932] imx-media: subdev ipu2_ic_prpvf bound [ 3.530909] hub 1-1:1.0: USB hub found [ 3.535838] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4 [ 3.542125] imx-media: subdev ipu1_csi0 bound [ 3.546895] hub 1-1:1.0: 4 ports detected [ 3.551761] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5 [ 3.558629] imx-media: subdev ipu1_csi1 bound [ 3.575062] sgtl5000 0-000a: Linked as a consumer to regulator.7 [ 3.581313] sgtl5000 0-000a: Linked as a consumer to regulator.8 [ 3.589698] sgtl5000 0-000a: sgtl5000 revision 0x11 [ 3.600246] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 3.646925] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered [ 3.657067] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.683491] [drm] Cannot find any crtc or sizes [ 3.701342] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok [ 3.724836] NET: Registered protocol family 10 [ 3.733582] Segment Routing with IPv6 [ 3.737550] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.745511] NET: Registered protocol family 17 [ 3.750011] can: controller area network core (rev 20170425 abi 9) [ 3.756584] NET: Registered protocol family 29 [ 3.761060] can: raw protocol (rev 20170425) [ 3.766194] can: broadcast manager protocol (rev 20170425 t) [ 3.771908] can: netlink gateway (rev 20170425) max_hops=1 [ 3.778146] Key type dns_resolver registered [ 3.783961] cpu cpu0: Linked as a consumer to regulator.4 [ 3.789607] cpu cpu0: Linked as a consumer to regulator.5 [ 3.795331] cpu cpu0: Linked as a consumer to regulator.6 [ 3.805387] Registering SWP/SWPB emulation handler [ 3.811779] Loading compiled-in X.509 certificates [ 3.883629] imx-media: subdev ipu1_csi0_mux bound [ 3.889222] imx-media: subdev ipu1_csi1_mux bound [ 3.894373] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0 [ 3.899277] imx-media: ipu1_csi1:1 -> ipu1_vdic:0 [ 3.904065] imx-media: ipu1_csi1_mux:5 -> ipu1_csi1:0 [ 3.909139] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 [ 3.914076] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 [ 3.918811] imx-media: ipu1_csi0_mux:5 -> ipu1_csi0:0 [ 3.923926] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0 [ 3.929259] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0 [ 3.934544] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 [ 3.939875] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 [ 3.945156] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0 [ 3.950052] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 [ 3.963020] imx_thermal tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 3.975385] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 3.984918] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.032403] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.040513] ALSA device list: [ 4.043638] #0: imx6-riotboard-sgtl5000 [ 4.048360] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.060768] Freeing unused kernel memory: 1024K [ 4.065625] cfg80211: failed to load regulatory.db [ 4.083433] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 4.392161] udevd[158]: starting version 3.2.9 [ 4.399210] random: udevd: uninitialized urandom read (16 bytes read) [ 4.406997] random: udevd: uninitialized urandom read (16 bytes read) [ 4.413757] random: udevd: uninitialized urandom read (16 bytes read) [ 4.430832] udevd[158]: specified user 'tss' unknown [ 4.436284] udevd[158]: specified group 'tss' unknown [ 4.448874] udevd[159]: starting eudev-3.2.9 [ 5.795924] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6d.bin failed with error -2 [ 5.850090] coda 2040000.vpu: Direct firmware load for vpu/vpu_fw_imx6d.bin failed with error -2 [ 5.899147] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6dl.bin failed with error -2 [ 5.932721] coda 2040000.vpu: firmware request failed done Saving random seed: [ 6.586504] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 6.764020] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-911039/environment . /lava-911039/environment / # /lava-911039/bin/lava-test-runner /lava-911039/0 /lava-911039/bin/lava-test-runner /lava-911039/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-911039/0/tests/0_dmesg + cat uuid + UUID=911039_1.5.2.3.1 [ 7.430723] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 7.510173] [ 7.580321] [ 7.650645] + set +x [ 7.661383] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-911039/environment / # . /lava-911039/environment/lava-911039/bin/lava-test-runner /lava-911039/1 / # /lava-911039/bin/lava-test-runner /lava-911039/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-911039/1/tests/1_bootrr + cat uuid + UUID=911039_1.5.2.3.5 [ 8.215472] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-911039/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-911039/1/../bin/lava-test-case [ 8.311087] /lava-911039/1/../bin/lava-test-case [ 8.380416] /lava-911039/1/../bin/lava-test-case [ 8.418752] + set +x [ 8.448215] / #