connecting to NetworkSerialPort(target=Target(name='imx6dl-riotboard-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4011, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4011 connected to 10.8.254.5 (port 4011) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2023.01.0 #1 Fri Jan 27 16:21:21 CET 2023 Board: RIoTboard i.MX6S detected i.MX6 Solo revision 1.1 i.MX6 Solo unique ID: 132c61d4d72d78a9 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2194000.mmc@2194000.of: registered as mmc1 imx-esdhc 2198000.mmc@2198000.of: registered as mmc2 imx-esdhc 219c000.mmc@219c000.of: registered as mmc3 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-hdmi 120000.hdmi@120000.of: Detected HDMI controller 0x13:0x1a:0xa0:0xc1 netconsole: registered as netconsole-1 malloc space: 0x2fe7b320 -> 0x4fcf663f (size 510.5 MiB) mmc3: detected MMC card version 4.41 mmc3: registered mmc3.boot0 mmc3: registered mmc3.boot1 mmc3: registered mmc3 [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/914358/tftp-deploy-_g5_0m2a/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/914358/tftp-deploy-_g5_0m2a/dtb/imx6dl-riotboard.dtb /mnt/tftp/914358/tftp-deploy-_g5_0m2a/kernel/zImage [1;32mbarebox@[1;36mRIoTboard i.MX6S:/[0m bootm -v -r /mnt/tftp/914358/tftp-deploy-_g5_0m2a/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/914358/tftp-deploy-_g5_0m2a/dtb/imx6dl-riotboard.dtb /mnt/tftp/914358/tftp-deploy-_g5_0m2a/kernel/zImage [1;33mWARNING:[0m eth0: No MAC address set. Using random address e2:4f:75:34:83:a0 eth0: 1000Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.49 Loading ARM Linux zImage '/mnt/tftp/914358/tftp-deploy-_g5_0m2a/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12899000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/914358/tftp-deploy-_g5_0m2a/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x188d72f1 Loading devicetree from '/mnt/tftp/914358/tftp-deploy-_g5_0m2a/dtb/imx6dl-riotboard.dtb' commandline: console=ttymxc1,115200n8 Starting kernel at 0x12899000, initrd at 0x18000000, oftree at 0x188d8000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.275-cip92 (KernelCI@build-j1118534-arm-gcc-10-imx-v6-v7-defconfig-v22wj) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Fri Mar 3 15:22:06 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: RIoTboard i.MX6S [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 64 MiB at 0x4a000000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] percpu: Embedded 17 pages/cpu s37928 r8192 d23512 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: console=ttymxc1,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 938692K/1048576K available (11264K kernel code, 880K rwdata, 3616K rodata, 1024K init, 7651K bss, 44348K reserved, 65536K cma-reserved, 195512K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 881 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7652 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000008] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000037] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001594] Console: colour dummy device 80x30 [ 0.001635] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001653] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001669] ... MAX_LOCK_DEPTH: 48 [ 0.001686] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001703] ... CLASSHASH_SIZE: 4096 [ 0.001718] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001734] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001750] ... CHAINHASH_SIZE: 32768 [ 0.001766] memory used by lock dependency info: 4655 kB [ 0.001782] per task-struct memory footprint: 1536 bytes [ 0.001879] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.001907] pid_max: default: 32768 minimum: 301 [ 0.002291] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002329] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.005191] CPU: Testing write buffer coherency: ok [ 0.005283] CPU0: Spectre v2: using BPIALL workaround [ 0.006636] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.008863] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.009450] rcu: Hierarchical SRCU implementation. [ 0.011162] smp: Bringing up secondary CPUs ... [ 0.011190] smp: Brought up 1 node, 1 CPU [ 0.011213] SMP: Total of 1 processors activated (6.00 BogoMIPS). [ 0.011233] CPU: All CPU(s) started in SVC mode. [ 0.013614] devtmpfs: initialized [ 0.037387] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.038221] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.038290] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.041112] pinctrl core: initialized pinctrl subsystem [ 0.046380] NET: Registered protocol family 16 [ 0.066653] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.069799] cpuidle: using governor menu [ 0.070032] CPU identified as i.MX6DL, silicon rev 1.1 [ 0.087704] vdd1p1: supplied by regulator-dummy [ 0.089256] vdd3p0: supplied by regulator-dummy [ 0.090597] vdd2p5: supplied by regulator-dummy [ 0.091853] vddarm: supplied by regulator-dummy [ 0.093597] vddpu: supplied by regulator-dummy [ 0.094478] vddsoc: supplied by regulator-dummy [ 0.116598] No ATAGs? [ 0.116867] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.116959] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.119466] imx6dl-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.120584] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.183045] mxs-dma 110000.dma-apbh: initialized [ 0.188751] vgaarb: loaded [ 0.189848] SCSI subsystem initialized [ 0.191163] usbcore: registered new interface driver usbfs [ 0.191382] usbcore: registered new interface driver hub [ 0.191497] usbcore: registered new device driver usb [ 0.195185] i2c i2c-0: IMX I2C adapter registered [ 0.195234] i2c i2c-0: can't use DMA, using PIO instead. [ 0.196308] i2c i2c-1: IMX I2C adapter registered [ 0.196348] i2c i2c-1: can't use DMA, using PIO instead. [ 0.197362] i2c i2c-3: IMX I2C adapter registered [ 0.197401] i2c i2c-3: can't use DMA, using PIO instead. [ 0.197586] media: Linux media interface: v0.10 [ 0.197708] videodev: Linux video capture interface: v2.00 [ 0.198193] pps_core: LinuxPPS API ver. 1 registered [ 0.198218] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.198286] PTP clock support registered [ 0.199138] Advanced Linux Sound Architecture Driver Initialized. [ 0.202604] Bluetooth: Core ver 2.22 [ 0.202727] NET: Registered protocol family 31 [ 0.202750] Bluetooth: HCI device and connection manager initialized [ 0.202872] Bluetooth: HCI socket layer initialized [ 0.202907] Bluetooth: L2CAP socket layer initialized [ 0.203103] Bluetooth: SCO socket layer initialized [ 0.205193] clocksource: Switched to clocksource mxc_timer1 [ 0.423731] VFS: Disk quotas dquot_6.6.0 [ 0.423894] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.449159] NET: Registered protocol family 2 [ 0.449752] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.452209] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) [ 0.452329] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.452489] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.453496] TCP: Hash tables configured (established 8192 bind 8192) [ 0.454136] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.454319] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.454880] NET: Registered protocol family 1 [ 0.457010] RPC: Registered named UNIX socket transport module. [ 0.457090] RPC: Registered udp transport module. [ 0.457113] RPC: Registered tcp transport module. [ 0.457134] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.459617] Trying to unpack rootfs image as initramfs... [ 1.430501] Freeing initrd memory: 9056K [ 1.432142] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.436671] Initialise system trusted keyrings [ 1.437457] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 1.453767] NFS: Registering the id_resolver key type [ 1.454056] Key type id_resolver registered [ 1.454134] Key type id_legacy registered [ 1.454323] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.456130] fuse init (API version 7.27) [ 1.470682] Key type asymmetric registered [ 1.470891] Asymmetric key parser 'x509' registered [ 1.471184] bounce: pool size: 64 pages [ 1.471312] io scheduler noop registered [ 1.471340] io scheduler deadline registered [ 1.471668] io scheduler cfq registered (default) [ 1.471698] io scheduler mq-deadline registered [ 1.471722] io scheduler kyber registered [ 1.489877] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.490156] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.492705] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 1.493226] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 1.493451] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 1.493859] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 1.494372] PU : no governor for states [ 1.494430] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 1.498280] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1 [ 1.499162] pfuze100-regulator 0-0008: FAB: 0, FIN: 0 [ 1.499188] pfuze100-regulator 0-0008: pfuze100 found. [ 1.523697] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 25, base_baud = 5000000) is a IMX [ 1.526950] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 68, base_baud = 5000000) is a IMX [ 2.428758] console [ttymxc1] enabled [ 2.434326] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 69, base_baud = 5000000) is a IMX [ 2.444685] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 70, base_baud = 5000000) is a IMX [ 2.455050] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 71, base_baud = 5000000) is a IMX [ 2.481007] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 2.487506] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 2.493110] etnaviv-gpu 130000.gpu: model: GC880, revision: 5106 [ 2.511718] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 2.532593] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 [ 2.544420] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.551249] [drm] No driver support for vblank timestamp query. [ 2.558905] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.566780] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.575418] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.31a with HDCP (DWC HDMI 3D TX PHY) [ 2.590927] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 2.599467] [drm] Cannot find any crtc or sizes [ 2.607113] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.615094] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.643731] brd: module loaded [ 2.671966] loop: module loaded [ 2.684427] CAN device driver interface [ 2.691408] fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator [ 2.700387] fec 2188000.ethernet: Linked as a consumer to regulator.0 [ 2.710429] pps pps0: new PPS source ptp0 [ 2.752974] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.760617] usbcore: registered new interface driver asix [ 2.766366] usbcore: registered new interface driver ax88179_178a [ 2.772567] usbcore: registered new interface driver cdc_ether [ 2.778650] usbcore: registered new interface driver net1080 [ 2.784413] usbcore: registered new interface driver cdc_subset [ 2.790579] usbcore: registered new interface driver zaurus [ 2.796388] usbcore: registered new interface driver cdc_ncm [ 2.802067] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.808664] ehci-pci: EHCI PCI platform driver [ 2.813223] ehci-mxc: Freescale On-Chip EHCI Host driver [ 2.819436] usbcore: registered new interface driver usb-storage [ 2.829496] imx_usb 2184000.usb: Linked as a consumer to regulator.9 [ 2.845461] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 2.853882] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 2.863927] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 2.869394] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 2.905241] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 2.915005] hub 1-0:1.0: USB hub found [ 2.919225] hub 1-0:1.0: 1 port detected [ 2.935536] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 2.941993] i2c /dev entries driver [ 2.956366] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 2.963028] Bluetooth: HCI UART driver ver 2.3 [ 2.967574] Bluetooth: HCI UART protocol H4 registered [ 2.973257] Bluetooth: HCI UART protocol LL registered [ 2.980019] sdhci: Secure Digital Host Controller Interface driver [ 2.986282] sdhci: Copyright(c) Pierre Ossman [ 2.990661] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.997975] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 3.003211] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO [ 3.008803] sdhci-esdhc-imx 2194000.usdhc: Linked as a consumer to regulator.8 [ 3.051759] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 3.061830] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 3.067430] sdhci-esdhc-imx 2198000.usdhc: Got WP GPIO [ 3.072915] sdhci-esdhc-imx 2198000.usdhc: Linked as a consumer to regulator.8 [ 3.114159] mmc1: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.124146] sdhci-esdhc-imx 219c000.usdhc: Linked as a consumer to regulator.8 [ 3.165274] mmc2: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA [ 3.181934] caam 2100000.caam: Entropy delay = 3200 [ 3.247774] caam 2100000.caam: Instantiated RNG4 SH0 [ 3.308538] caam 2100000.caam: Instantiated RNG4 SH1 [ 3.313532] caam 2100000.caam: device ID = 0x0a16010000000100 (Era 4) [ 3.320038] caam 2100000.caam: job rings = 2, qi = 0 [ 3.325212] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.359669] caam algorithms registered in /proc/crypto [ 3.372867] caam_jr 2101000.jr0: registering rng-caam [ 3.384534] usbcore: registered new interface driver usbhid [ 3.390391] usbhid: USB HID core driver [ 3.396321] mmc2: new DDR MMC card at address 0001 [ 3.409358] imx-media: subdev ipu1_vdic bound [ 3.414075] imx-media: subdev ipu2_vdic bound [ 3.421390] mmcblk2: mmc2:0001 MMC04G 3.58 GiB [ 3.427877] mmcblk2boot0: mmc2:0001 MMC04G partition 1 2.00 MiB [ 3.435851] imx-media: subdev ipu1_ic_prp bound [ 3.442068] mmcblk2boot1: mmc2:0001 MMC04G partition 2 2.00 MiB [ 3.448924] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0 [ 3.457031] mmcblk2rpmb: mmc2:0001 MMC04G partition 3 128 KiB, chardev (244:0) [ 3.465500] imx-media: subdev ipu1_ic_prpenc bound [ 3.470965] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1 [ 3.484693] imx-media: subdev ipu1_ic_prpvf bound [ 3.493565] imx-media: subdev ipu2_ic_prp bound [ 3.503807] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2 [ 3.511142] imx-media: subdev ipu2_ic_prpenc bound [ 3.516695] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3 [ 3.523642] imx-media: subdev ipu2_ic_prpvf bound [ 3.532807] hub 1-1:1.0: USB hub found [ 3.537456] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4 [ 3.543668] imx-media: subdev ipu1_csi0 bound [ 3.548503] hub 1-1:1.0: 4 ports detected [ 3.553541] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5 [ 3.560150] imx-media: subdev ipu1_csi1 bound [ 3.576829] sgtl5000 0-000a: Linked as a consumer to regulator.7 [ 3.583083] sgtl5000 0-000a: Linked as a consumer to regulator.8 [ 3.591477] sgtl5000 0-000a: sgtl5000 revision 0x11 [ 3.601667] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 3.610095] [drm] Cannot find any crtc or sizes [ 3.653911] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered [ 3.664067] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.703400] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok [ 3.727031] NET: Registered protocol family 10 [ 3.735826] Segment Routing with IPv6 [ 3.739830] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.747821] NET: Registered protocol family 17 [ 3.752323] can: controller area network core (rev 20170425 abi 9) [ 3.758893] NET: Registered protocol family 29 [ 3.763369] can: raw protocol (rev 20170425) [ 3.768504] can: broadcast manager protocol (rev 20170425 t) [ 3.774219] can: netlink gateway (rev 20170425) max_hops=1 [ 3.780488] Key type dns_resolver registered [ 3.786311] cpu cpu0: Linked as a consumer to regulator.4 [ 3.791951] cpu cpu0: Linked as a consumer to regulator.5 [ 3.797672] cpu cpu0: Linked as a consumer to regulator.6 [ 3.807738] Registering SWP/SWPB emulation handler [ 3.814162] Loading compiled-in X.509 certificates [ 3.886466] imx-media: subdev ipu1_csi0_mux bound [ 3.892061] imx-media: subdev ipu1_csi1_mux bound [ 3.897216] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0 [ 3.902122] imx-media: ipu1_csi1:1 -> ipu1_vdic:0 [ 3.906912] imx-media: ipu1_csi1_mux:5 -> ipu1_csi1:0 [ 3.911987] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 [ 3.916926] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 [ 3.921661] imx-media: ipu1_csi0_mux:5 -> ipu1_csi0:0 [ 3.926777] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0 [ 3.932107] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0 [ 3.937392] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 [ 3.942722] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 [ 3.948007] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0 [ 3.952902] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 [ 3.965903] imx_thermal tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 3.978256] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 3.987770] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.035026] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.043177] ALSA device list: [ 4.046303] #0: imx6-riotboard-sgtl5000 [ 4.051022] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.063417] Freeing unused kernel memory: 1024K [ 4.068265] cfg80211: failed to load regulatory.db [ 4.085796] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 4.394231] udevd[158]: starting version 3.2.9 [ 4.401297] random: udevd: uninitialized urandom read (16 bytes read) [ 4.409117] random: udevd: uninitialized urandom read (16 bytes read) [ 4.415936] random: udevd: uninitialized urandom read (16 bytes read) [ 4.433050] udevd[158]: specified user 'tss' unknown [ 4.438439] udevd[158]: specified group 'tss' unknown [ 4.451026] udevd[159]: starting eudev-3.2.9 [ 5.809465] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6d.bin failed with error -2 [ 5.853518] coda 2040000.vpu: Direct firmware load for vpu/vpu_fw_imx6d.bin failed with error -2 [ 5.915932] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6dl.bin failed with error -2 [ 5.924924] coda 2040000.vpu: firmware request failed done Saving random seed: [ 6.596053] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 6.774628] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-914358/environment . /lava-914358/environment / # /lava-914358/bin/lava-test-runner /lava-914358/0 /lava-914358/bin/lava-test-runner /lava-914358/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-914358/0/tests/0_dmesg + cat uuid + UUID=914358_1.5.2.3.1 [ 7.431110] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 7.511399] [ 7.582732] [ 7.653232] + set +x [ 7.663923] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-914358/environment / # . /lava-914358/environment/lava-914358/bin/lava-test-runner /lava-914358/1 / # /lava-914358/bin/lava-test-runner /lava-914358/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-914358/1/tests/1_bootrr + cat uuid + UUID=914358_1.5.2.3.5 [ 8.217849] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-914358/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto /lava-914358/1/../bin/lava-test-case [ 8.313261] /lava-914358/1/../bin/lava-test-case [ 8.381195] /lava-914358/1/../bin/lava-test-case [ 8.420054] + set +x [ 8.448872] / #