connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/932303/tftp-deploy-8g0g53se/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/932303/tftp-deploy-8g0g53se/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/932303/tftp-deploy-8g0g53se/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/932303/tftp-deploy-8g0g53se/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/932303/tftp-deploy-8g0g53se/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/932303/tftp-deploy-8g0g53se/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 26:df:04:f8:8f:bd T eth0: DHCP client bound to address 10.8.254.224 Loading ARM Linux zImage '/mnt/tftp/932303/tftp-deploy-8g0g53se/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x129a0000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/932303/tftp-deploy-8g0g53se/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18cb8c8b Loading devicetree from '/mnt/tftp/932303/tftp-deploy-8g0g53se/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x129a0000, initrd at 0x18000000, oftree at 0x18cb9000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.281-cip96 (KernelCI@build-j1380402-arm-gcc-10-multi-v7-defconfig-7p2j5) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Thu Apr 20 13:39:35 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] percpu: Embedded 16 pages/cpu s36748 r8192 d20596 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1978488K/2097152K available (12288K kernel code, 1597K rwdata, 4684K rodata, 2048K init, 394K bss, 53128K reserved, 65536K cma-reserved, 1244148K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (13280 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1598 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 395 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000026] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.003021] Console: colour dummy device 80x30 [ 0.003071] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.003086] pid_max: default: 32768 minimum: 301 [ 0.003232] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003255] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003856] CPU: Testing write buffer coherency: ok [ 0.003886] CPU0: Spectre v2: using BPIALL workaround [ 0.004279] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005001] Setting up static identity map for 0x10300000 - 0x103000a0 [ 0.006602] rcu: Hierarchical SRCU implementation. [ 0.009712] EFI services will not be available. [ 0.010032] smp: Bringing up secondary CPUs ... [ 0.010862] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.010868] CPU1: Spectre v2: using BPIALL workaround [ 0.011813] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.011818] CPU2: Spectre v2: using BPIALL workaround [ 0.012737] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.012745] CPU3: Spectre v2: using BPIALL workaround [ 0.012864] smp: Brought up 1 node, 4 CPUs [ 0.012876] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.012885] CPU: All CPU(s) started in SVC mode. [ 0.013981] devtmpfs: initialized [ 0.020789] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.021179] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021202] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.024495] pinctrl core: initialized pinctrl subsystem [ 0.026104] DMI not present or invalid. [ 0.026924] NET: Registered protocol family 16 [ 0.029978] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.032394] cpuidle: using governor menu [ 0.032554] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.040793] vdd1p1: supplied by regulator-dummy [ 0.041349] vdd3p0: supplied by regulator-dummy [ 0.041865] vdd2p5: supplied by regulator-dummy [ 0.042403] vddarm: supplied by regulator-dummy [ 0.043062] vddpu: supplied by regulator-dummy [ 0.043480] vddsoc: supplied by regulator-dummy [ 0.057772] No ATAGs? [ 0.057920] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.057936] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.061234] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.061449] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.066274] Serial: AMBA PL011 UART driver [ 0.090400] mxs-dma 110000.dma-apbh: initialized [ 0.092790] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.iomuxc; cannot claim for regulator-usbotgvbus [ 0.092807] imx6q-pinctrl 20e0000.iomuxc: pin-42 (regulator-usbotgvbus) status -22 [ 0.092823] imx6q-pinctrl 20e0000.iomuxc: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.iomuxc [ 0.092835] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.092857] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.096347] vgaarb: loaded [ 0.097162] SCSI subsystem initialized [ 0.097600] usbcore: registered new interface driver usbfs [ 0.097651] usbcore: registered new interface driver hub [ 0.097705] usbcore: registered new device driver usb [ 0.098770] i2c i2c-0: IMX I2C adapter registered [ 0.098788] i2c i2c-0: can't use DMA, using PIO instead. [ 0.099443] i2c i2c-1: IMX I2C adapter registered [ 0.099461] i2c i2c-1: can't use DMA, using PIO instead. [ 0.100044] i2c i2c-2: IMX I2C adapter registered [ 0.100061] i2c i2c-2: can't use DMA, using PIO instead. [ 0.101515] pps_core: LinuxPPS API ver. 1 registered [ 0.101524] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.101545] PTP clock support registered [ 0.101785] EDAC MC: Ver: 3.0.0 [ 0.104468] clocksource: Switched to clocksource mxc_timer1 [ 0.163164] NET: Registered protocol family 2 [ 0.163534] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.164782] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.164823] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.164907] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.165053] TCP: Hash tables configured (established 8192 bind 8192) [ 0.165226] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.165269] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.165432] NET: Registered protocol family 1 [ 0.165966] RPC: Registered named UNIX socket transport module. [ 0.165976] RPC: Registered udp transport module. [ 0.165984] RPC: Registered tcp transport module. [ 0.165992] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.166442] Trying to unpack rootfs image as initramfs... [ 1.283367] Freeing initrd memory: 13028K [ 1.283852] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 1.284297] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.286294] Initialise system trusted keyrings [ 1.286675] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.292764] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.293417] NFS: Registering the id_resolver key type [ 1.293457] Key type id_resolver registered [ 1.293468] Key type id_legacy registered [ 1.293513] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.295787] Key type asymmetric registered [ 1.295799] Asymmetric key parser 'x509' registered [ 1.295852] bounce: pool size: 64 pages [ 1.295897] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.295909] io scheduler noop registered [ 1.295919] io scheduler deadline registered [ 1.296067] io scheduler cfq registered (default) [ 1.296077] io scheduler mq-deadline registered [ 1.296087] io scheduler kyber registered [ 1.328859] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 1.328928] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 1.328989] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 1.329094] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 1.329324] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.329342] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.329375] PU : no governor for states [ 1.329396] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 1.384905] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.388407] SuperH (H)SCI(F) driver initialized [ 1.389252] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX [ 2.275681] console [ttymxc0] enabled [ 2.280201] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 66, base_baud = 5000000) is a IMX [ 2.290067] msm_serial: driver initialized [ 2.294403] STMicroelectronics ASC driver initialized [ 2.301232] STM32 USART driver initialized [ 2.323250] brd: module loaded [ 2.335115] loop: module loaded [ 2.341407] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.349371] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.357411] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.365608] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.376124] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.383123] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.391944] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.402390] scsi host0: ahci-imx [ 2.406184] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 73 [ 2.424424] CAN device driver interface [ 2.429488] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 2.436334] fec 2188000.ethernet: Linked as a consumer to regulator.9 [ 2.445206] pps pps0: new PPS source ptp0 [ 2.476184] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.483327] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.489204] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.495214] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 2.502181] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.513288] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 2.520760] usbcore: registered new interface driver pegasus [ 2.526486] usbcore: registered new interface driver asix [ 2.531931] usbcore: registered new interface driver ax88179_178a [ 2.538081] usbcore: registered new interface driver cdc_ether [ 2.543961] usbcore: registered new interface driver smsc75xx [ 2.549784] usbcore: registered new interface driver smsc95xx [ 2.555587] usbcore: registered new interface driver net1080 [ 2.561279] usbcore: registered new interface driver cdc_subset [ 2.567261] usbcore: registered new interface driver zaurus [ 2.572904] usbcore: registered new interface driver cdc_ncm [ 2.581372] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.587941] ehci-pci: EHCI PCI platform driver [ 2.592433] ehci-platform: EHCI generic platform driver [ 2.597978] ehci-orion: EHCI orion driver [ 2.602204] SPEAr-ehci: EHCI SPEAr driver [ 2.606431] ehci-st: EHCI STMicroelectronics driver [ 2.611492] ehci-exynos: EHCI EXYNOS driver [ 2.615889] ehci-atmel: EHCI Atmel driver [ 2.620077] tegra-ehci: Tegra EHCI driver [ 2.624286] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.630510] ohci-pci: OHCI PCI platform driver [ 2.635022] ohci-platform: OHCI generic platform driver [ 2.640505] SPEAr-ohci: OHCI SPEAr driver [ 2.644731] ohci-st: OHCI STMicroelectronics driver [ 2.649807] ohci-atmel: OHCI Atmel driver [ 2.654805] usbcore: registered new interface driver usb-storage [ 2.663067] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 2.671351] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 2.681250] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.686179] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 2.714500] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.720610] hub 1-0:1.0: USB hub found [ 2.724403] hub 1-0:1.0: 1 port detected [ 2.734574] i2c /dev entries driver [ 2.746024] ata1: SATA link down (SStatus 0 SControl 300) [ 2.751465] ahci-imx 2200000.sata: no device found, disabling link. [ 2.751925] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 2.757768] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 2.775959] sdhci: Secure Digital Host Controller Interface driver [ 2.782143] sdhci: Copyright(c) Pierre Ossman [ 2.788661] Synopsys Designware Multimedia Card Interface Driver [ 2.796586] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.803068] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 2.838229] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 2.878122] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.885861] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 2.895445] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.909585] mmc0: new high speed SDHC card at address 1234 [ 2.916632] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 2.923621] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 2.934826] ledtrig-cpu: registered to indicate activity on CPUs [ 2.941608] usbcore: registered new interface driver usbhid [ 2.947217] usbhid: USB HID core driver [ 2.956955] NET: Registered protocol family 10 [ 2.962541] Segment Routing with IPv6 [ 2.966325] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.972830] NET: Registered protocol family 17 [ 2.977329] can: controller area network core (rev 20170425 abi 9) [ 2.983582] NET: Registered protocol family 29 [ 2.988054] can: raw protocol (rev 20170425) [ 2.992331] can: broadcast manager protocol (rev 20170425 t) [ 2.998015] can: netlink gateway (rev 20170425) max_hops=1 [ 3.003923] Key type dns_resolver registered [ 3.009265] cpu cpu0: Linked as a consumer to regulator.4 [ 3.014776] cpu cpu0: Linked as a consumer to regulator.5 [ 3.020249] cpu cpu0: Linked as a consumer to regulator.6 [ 3.026506] ThumbEE CPU extension supported. [ 3.030824] Registering SWP/SWPB emulation handler [ 3.036217] Loading compiled-in X.509 certificates [ 3.059246] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 3.068726] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.079517] hctosys: unable to open rtc device (rtc0) [ 3.088669] Freeing unused kernel memory: 2048K [ 3.094768] Run /init as init process [ 3.136799] mmc2: new DDR MMC card at address 0001 [ 3.143632] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.149881] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 3.157389] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 3.163674] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (235:0) Starting syslogd: [ 3.172339] mmcblk2: p1 p2 OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 3.230323] udevd[108]: starting version 3.2.9 [ 3.236385] random: udevd: uninitialized urandom read (16 bytes read) [ 3.243092] random: udevd: uninitialized urandom read (16 bytes read) [ 3.249904] random: udevd: uninitialized urandom read (16 bytes read) [ 3.264307] udevd[108]: specified user 'tss' unknown [ 3.269591] udevd[108]: specified group 'tss' unknown [ 3.277013] udevd[109]: starting eudev-3.2.9 [ 3.298225] hub 1-1:1.0: USB hub found [ 3.302763] hub 1-1:1.0: 4 ports detected [ 3.568218] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 3.576326] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 3.586763] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 3.593333] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 3.604336] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 3.618934] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 3.625100] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 3.631893] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 [ 3.735189] sgtl5000 1-000a: Linked as a consumer to regulator.7 [ 3.741413] sgtl5000 1-000a: Linked as a consumer to regulator.8 [ 3.753388] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 3.776102] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-932303/environment . /lava-932303/environment / # /lava-932303/bin/lava-test-runner /lava-932303/0 /lava-932303/bin/lava-test-runner /lava-932303/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-932303/0/tests/0_dmesg + cat uuid [ 4.750678] + UUID=932303_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 4.794701] [ 4.835662] [ 4.876620] + set +x [ 4.886290] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-932303/environment / # . /lava-932303/environment/lava-932303/bin/lava-test-runner /lava-932303/1 / # /lava-932303/bin/lava-test-runner /lava-932303/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-932303/1/tests/1_bootrr + cat uuid [ 5.376891] + UUID=932303_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-932303/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 2184000.usb /lava-932303/1/../bin/lava-test-case [ 6.448839] /lava-932303/1/../bin/lava-test-case [ 6.489476] /lava-932303/1/../bin/lava-test-case [ 6.515137] + set +x [ 6.533899] / #