connecting to NetworkSerialPort(target=Target(name='imx28-duckbill-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4014, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4014 connected to 10.8.254.5 (port 4014) Escape character: Ctrl-\ Type the escape character to get to the prompt. HTLLCLLC barebox 2020.05.0-00003-g4c4057edd6 #6 Fri May 29 14:12:02 CEST 2020 Board: I2SE Duckbill detected i.MX28 revision 1.2 mdio_bus: miibus0: probed eth0: got preset MAC address: 00:04:9f:06:00:04 mxs_mci 80010000.spi@80010000.of: registered as mci0 mci0: detected SD card version 2.0 mci0: registered disk0 malloc space: 0x43efdac0 -> 0x47dfb57f (size 63 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mI2SE Duckbill:/[0m global linux.bootargs.console=\"console=ttyAMA0,115200n8 earlycon\" [1;32mbarebox@[1;36mI2SE Duckbill:/[0m global linux.bootargs.console=\"console=ttyAMA0,115200n8 earlycon\"global linux.bootargs.nfs=\"'root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/932305/extract-nfsrootfs-x0uel_uy,v3,tcp ip=dhcp'\" [1;32mbarebox@[1;36mI2SE Duckbill:/[0m global linux.bootargs.nfs=\"'root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/932305/extract-nfsrootfs-x0uel_uy,v3,tcp ip=dhcp'\"bootm -v -o /mnt/tftp/932305/tftp-deploy-ly1l76c8/dtb/imx28-duckbill.dtb /mnt/tftp/932305/tftp-deploy-ly1l76c8/kernel/zImage [1;32mbarebox@[1;36mI2SE Duckbill:/[0m bootm -v -o /mnt/tftp/932305/tftp-deploy-ly1l76c8/dtb/imx28-duckbill.dtb /mnt/tftp/932305/tftp-deploy-ly1l76c8/kernel/zImage eth0: 100Mbps full duplex link detected T eth0: DHCP client bound to address 10.8.254.53 Loading ARM Linux zImage '/mnt/tftp/932305/tftp-deploy-ly1l76c8/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x416eb000 no initrd load address, defaulting to 0x41c81000 Loading devicetree from '/mnt/tftp/932305/tftp-deploy-ly1l76c8/dtb/imx28-duckbill.dtb' commandline: console=ttyAMA0,115200n8 earlycon root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/932305/extract-nfsrootfs-x0uel_uy,v3,tcp ip=dhcp Starting kernel at 0x416eb000, oftree at 0x41c81000... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.281-cip96 (KernelCI@build-j1380283-arm-gcc-10-mxs-defconfig-6wxr2) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 Thu Apr 20 13:42:41 UTC 2023 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: I2SE Duckbill [ 0.000000] Malformed early option 'earlycon' [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 earlycon root=/dev/nfs rw nfsroot=10.8.254.2:/var/lib/lava/dispatcher/tmp/932305/extract-nfsrootfs-x0uel_uy,v3,tcp ip=dhcp [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 112524K/131072K available (6604K kernel code, 556K rwdata, 2152K rodata, 296K init, 7446K bss, 18548K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (6606 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) ( 296 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 557 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7447 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: mxs_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000035] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.002145] Console: colour dummy device 80x30 [ 0.002300] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.002361] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.002412] ... MAX_LOCK_DEPTH: 48 [ 0.002462] ... MAX_LOCKDEP_KEYS: 8191 [ 0.002511] ... CLASSHASH_SIZE: 4096 [ 0.002561] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.002608] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.002658] ... CHAINHASH_SIZE: 32768 [ 0.002708] memory used by lock dependency info: 4655 kB [ 0.002759] per task-struct memory footprint: 1536 bytes [ 0.003043] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496) [ 0.071300] pid_max: default: 32768 minimum: 301 [ 0.072319] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.072433] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.079763] CPU: Testing write buffer coherency: ok [ 0.089475] Setting up static identity map for 0x40008400 - 0x40008458 [ 0.098641] devtmpfs: initialized [ 0.147143] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.147371] futex hash table entries: 256 (order: 1, 11264 bytes) [ 0.148417] pinctrl core: initialized pinctrl subsystem [ 0.164319] NET: Registered protocol family 16 [ 0.167133] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.335727] Serial: AMBA PL011 UART driver [ 0.338592] 80074000.serial: ttyAMA0 at MMIO 0x80074000 (irq = 229, base_baud = 0) is a PL011 rev2 [ 0.665467] console [ttyAMA0] enabled [ 0.750450] mxs-dma 80004000.dma-apbh: initialized [ 0.767507] mxs-dma 80024000.dma-apbx: initialized [ 0.778358] SCSI subsystem initialized [ 0.784915] usbcore: registered new interface driver usbfs [ 0.791409] usbcore: registered new interface driver hub [ 0.797183] usbcore: registered new device driver usb [ 0.809524] pps_core: LinuxPPS API ver. 1 registered [ 0.814787] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.824199] PTP clock support registered [ 0.830937] Advanced Linux Sound Architecture Driver Initialized. [ 0.845762] clocksource: Switched to clocksource mxs_timer [ 1.419521] NET: Registered protocol family 2 [ 1.425249] IP idents hash table entries: 2048 (order: 2, 16384 bytes) [ 1.436257] tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 5120 bytes) [ 1.444168] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 1.451509] TCP bind hash table entries: 1024 (order: 3, 36864 bytes) [ 1.458658] TCP: Hash tables configured (established 1024 bind 1024) [ 1.466468] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 1.472769] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 1.480808] NET: Registered protocol family 1 [ 1.491925] RPC: Registered named UNIX socket transport module. [ 1.498378] RPC: Registered udp transport module. [ 1.503174] RPC: Registered tcp transport module. [ 1.508143] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.529201] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 1.610674] NFS: Registering the id_resolver key type [ 1.617328] Key type id_resolver registered [ 1.621822] Key type id_legacy registered [ 1.626679] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.660147] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.668139] io scheduler noop registered (default) [ 1.673052] io scheduler mq-deadline registered [ 1.677893] io scheduler kyber registered [ 1.690742] 8006a000.serial: ttyAPP0 at MMIO 0x8006a000 (irq = 228, base_baud = 1500000) is a 8006a000.serial [ 1.702842] mxs-auart 8006a000.serial: Found APPUART 3.1.0 [ 1.740605] fec 800f0000.ethernet: Linked as a consumer to regulator.1 [ 1.824957] usbcore: registered new interface driver asix [ 1.831049] usbcore: registered new interface driver ax88179_178a [ 1.837829] usbcore: registered new interface driver cdc_ether [ 1.844223] usbcore: registered new interface driver smsc95xx [ 1.850613] usbcore: registered new interface driver net1080 [ 1.856907] usbcore: registered new interface driver cdc_subset [ 1.863250] usbcore: registered new interface driver zaurus [ 1.869764] usbcore: registered new interface driver cdc_ncm [ 1.875533] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.882815] usbcore: registered new interface driver usb-storage [ 1.916141] stmp3xxx-rtc 80056000.rtc: rtc core: registered 80056000.rtc as rtc0 [ 1.925145] i2c /dev entries driver [ 1.939007] stmp3xxx_rtc_wdt stmp3xxx_rtc_wdt: initialized watchdog with heartbeat 19s [ 1.951683] mxs-mmc 80010000.ssp: Linked as a consumer to regulator.1 [ 1.989530] mxs-mmc 80010000.ssp: initialized [ 2.013690] mxs-dcp 80028000.dcp: Failed to register sha1 hash! [ 2.022515] mxs-dcp: probe of 80028000.dcp failed with error -22 [ 2.039392] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.048479] usbcore: registered new interface driver usbhid [ 2.054142] usbhid: USB HID core driver [ 2.061435] mmc0: new high speed SDHC card at address 1234 [ 2.095667] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 2.110722] NET: Registered protocol family 17 [ 2.124821] Key type dns_resolver registered [ 2.134903] mmcblk0: p1 [ 2.157276] registered taskstats version 1 [ 2.231617] stmp3xxx-rtc 80056000.rtc: setting system clock to 1970-01-01 00:00:10 UTC (10) [ 2.347250] SMSC LAN8710/LAN8720 800f0000.ethernet-1:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=800f0000.ethernet-1:00, irq=POLL) [ 4.468390] fec 800f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 4.515997] Sending DHCP requests ., OK [ 4.639929] IP-Config: Got DHCP answer from 10.8.254.2, my address is 10.8.254.53 [ 4.647685] IP-Config: Complete: [ 4.651014] device=eth0, hwaddr=00:04:9f:06:00:04, ipaddr=10.8.254.53, mask=255.255.255.0, gw=255.255.255.255 [ 4.661623] host=10.8.254.53, domain=, nis-domain=(none) [ 4.667628] bootserver=10.8.254.2, rootserver=10.8.254.2, rootpath= [ 4.667658] nameserver0=10.8.254.2 [ 4.683805] ALSA device list: [ 4.687090] No soundcards found. [ 4.695011] uart-pl011 80074000.serial: no DMA platform data [ 4.826788] VFS: Mounted root (nfs filesystem) on device 0:13. [ 4.837955] devtmpfs: mounted [ 4.843233] Freeing unused kernel memory: 296K [ 4.848001] This architecture does not have kernel memory protection. [ 4.854533] Run /sbin/init as init process [ 5.015288] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 5.015288] [ 5.024535] CPU: 0 PID: 1 Comm: init Not tainted 4.19.281-cip96 #1 [ 5.030777] Hardware name: Freescale MXS (Device Tree) [ 5.036040] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 5.043892] [] (show_stack) from [] (panic+0xe0/0x270) [ 5.050859] [] (panic) from [] (do_exit+0x91c/0x958) [ 5.057646] [] (do_exit) from [] (do_group_exit+0x38/0xbc) [ 5.064949] [] (do_group_exit) from [] (get_signal+0x118/0x860) [ 5.072686] [] (get_signal) from [] (do_signal+0xe8/0x4c4) [ 5.079995] [] (do_signal) from [] (do_work_pending+0xd4/0xfc) [ 5.087649] [] (do_work_pending) from [] (slow_work_pending+0xc/0x20) [ 5.095891] Exception stack(0xc7885fb0 to 0xc7885ff8) [ 5.101012] 5fa0: bee18f10 00000000 00000000 00000001 [ 5.109264] 5fc0: 000008f8 00000000 00000000 00000000 00000000 00000000 000294e4 00000000 [ 5.117511] 5fe0: 00000000 bee18f10 b6fc022f b6fbfc54 40000030 ffffffff [ 5.124234] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b