connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/977178/tftp-deploy-kncwq6oa/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/977178/tftp-deploy-kncwq6oa/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/977178/tftp-deploy-kncwq6oa/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/977178/tftp-deploy-kncwq6oa/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/977178/tftp-deploy-kncwq6oa/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/977178/tftp-deploy-kncwq6oa/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 12:bd:93:96:07:4d T eth0: DHCP client bound to address 10.8.254.81 Loading ARM Linux zImage '/mnt/tftp/977178/tftp-deploy-kncwq6oa/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x12885000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/977178/tftp-deploy-kncwq6oa/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x188d8ae8 Loading devicetree from '/mnt/tftp/977178/tftp-deploy-kncwq6oa/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x12885000, initrd at 0x18000000, oftree at 0x188d9000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.286-cip99 (KernelCI@build-j35579-arm-gcc-10-imx-v6-v7-defconfig-qkhzs) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Wed Jun 14 11:49:51 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x8a000000 [ 0.000000] percpu: Embedded 17 pages/cpu s37928 r8192 d23512 u69632 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1978960K/2097152K available (11264K kernel code, 880K rwdata, 3616K rodata, 1024K init, 7651K bss, 52656K reserved, 65536K cma-reserved, 1244148K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 881 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7652 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000009] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000040] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.001606] Console: colour dummy device 80x30 [ 0.001649] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.001668] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.001688] ... MAX_LOCK_DEPTH: 48 [ 0.001704] ... MAX_LOCKDEP_KEYS: 8191 [ 0.001721] ... CLASSHASH_SIZE: 4096 [ 0.001739] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.001756] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.001772] ... CHAINHASH_SIZE: 32768 [ 0.001788] memory used by lock dependency info: 4655 kB [ 0.001806] per task-struct memory footprint: 1536 bytes [ 0.001905] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.001934] pid_max: default: 32768 minimum: 301 [ 0.002328] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002367] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.005197] CPU: Testing write buffer coherency: ok [ 0.005283] CPU0: Spectre v2: using BPIALL workaround [ 0.006667] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.008834] Setting up static identity map for 0x10100000 - 0x10100078 [ 0.009392] rcu: Hierarchical SRCU implementation. [ 0.011407] smp: Bringing up secondary CPUs ... [ 0.013822] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.013834] CPU1: Spectre v2: using BPIALL workaround [ 0.016498] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.016509] CPU2: Spectre v2: using BPIALL workaround [ 0.018589] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.018600] CPU3: Spectre v2: using BPIALL workaround [ 0.018942] smp: Brought up 1 node, 4 CPUs [ 0.018969] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.018991] CPU: All CPU(s) started in SVC mode. [ 0.021580] devtmpfs: initialized [ 0.045587] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.047927] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.047992] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.052320] pinctrl core: initialized pinctrl subsystem [ 0.057571] NET: Registered protocol family 16 [ 0.075577] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.078732] cpuidle: using governor menu [ 0.078948] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.094135] vdd1p1: supplied by regulator-dummy [ 0.095577] vdd3p0: supplied by regulator-dummy [ 0.096759] vdd2p5: supplied by regulator-dummy [ 0.097898] vddarm: supplied by regulator-dummy [ 0.099525] vddpu: supplied by regulator-dummy [ 0.100411] vddsoc: supplied by regulator-dummy [ 0.125027] No ATAGs? [ 0.125455] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.125570] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.127909] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.128729] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.186362] mxs-dma 110000.dma-apbh: initialized [ 0.189079] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.iomuxc; cannot claim for regulator-usbotgvbus [ 0.189112] imx6q-pinctrl 20e0000.iomuxc: pin-42 (regulator-usbotgvbus) status -22 [ 0.189139] imx6q-pinctrl 20e0000.iomuxc: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.iomuxc [ 0.189161] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.189242] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.192229] vgaarb: loaded [ 0.193182] SCSI subsystem initialized [ 0.194382] usbcore: registered new interface driver usbfs [ 0.194579] usbcore: registered new interface driver hub [ 0.194743] usbcore: registered new device driver usb [ 0.197597] i2c i2c-0: IMX I2C adapter registered [ 0.197642] i2c i2c-0: can't use DMA, using PIO instead. [ 0.198965] i2c i2c-1: IMX I2C adapter registered [ 0.199007] i2c i2c-1: can't use DMA, using PIO instead. [ 0.200290] i2c i2c-2: IMX I2C adapter registered [ 0.200332] i2c i2c-2: can't use DMA, using PIO instead. [ 0.200603] media: Linux media interface: v0.10 [ 0.200710] videodev: Linux video capture interface: v2.00 [ 0.201116] pps_core: LinuxPPS API ver. 1 registered [ 0.201141] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.201203] PTP clock support registered [ 0.201943] Advanced Linux Sound Architecture Driver Initialized. [ 0.205209] Bluetooth: Core ver 2.22 [ 0.205324] NET: Registered protocol family 31 [ 0.205345] Bluetooth: HCI device and connection manager initialized [ 0.205457] Bluetooth: HCI socket layer initialized [ 0.205491] Bluetooth: L2CAP socket layer initialized [ 0.205681] Bluetooth: SCO socket layer initialized [ 0.207654] clocksource: Switched to clocksource mxc_timer1 [ 0.417088] VFS: Disk quotas dquot_6.6.0 [ 0.417253] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.443047] NET: Registered protocol family 2 [ 0.443628] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.446011] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes) [ 0.446130] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.446278] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.447292] TCP: Hash tables configured (established 8192 bind 8192) [ 0.448090] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.448276] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.448850] NET: Registered protocol family 1 [ 0.450801] RPC: Registered named UNIX socket transport module. [ 0.450878] RPC: Registered udp transport module. [ 0.450902] RPC: Registered tcp transport module. [ 0.450923] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.453067] Trying to unpack rootfs image as initramfs... [ 1.396882] Freeing initrd memory: 9060K [ 1.398355] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 1.399019] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.403594] Initialise system trusted keyrings [ 1.404373] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.419310] NFS: Registering the id_resolver key type [ 1.419465] Key type id_resolver registered [ 1.419545] Key type id_legacy registered [ 1.419720] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.421086] fuse init (API version 7.27) [ 1.432711] Key type asymmetric registered [ 1.432877] Asymmetric key parser 'x509' registered [ 1.433110] bounce: pool size: 64 pages [ 1.433229] io scheduler noop registered [ 1.433257] io scheduler deadline registered [ 1.433566] io scheduler cfq registered (default) [ 1.433595] io scheduler mq-deadline registered [ 1.433620] io scheduler kyber registered [ 1.447972] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.448239] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.450400] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 1.450889] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 1.451118] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 1.451514] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 1.451972] PU : no governor for states [ 1.452028] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 1.455484] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1 [ 1.456386] pfuze100-regulator 2-0008: FAB: 0, FIN: 0 [ 1.456412] pfuze100-regulator 2-0008: pfuze100 found. [ 1.482199] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX [ 2.447660] console [ttymxc0] enabled [ 2.454313] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 66, base_baud = 5000000) is a IMX [ 2.478738] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 2.484969] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 2.491197] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 2.496888] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 2.506251] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 2.514312] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 2.520503] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 2.529342] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 [ 2.539501] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21c8000.pre [ 2.546267] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21c9000.pre [ 2.553059] imx-ipu-prg 21cc000.prg: Linked as a consumer to 21ca000.pre [ 2.560421] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21cb000.pre [ 2.567162] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21c9000.pre [ 2.573965] imx-ipu-prg 21cd000.prg: Linked as a consumer to 21ca000.pre [ 2.581613] imx-ipuv3 2400000.ipu: Linked as a consumer to 21cc000.prg [ 2.590196] imx-ipuv3 2400000.ipu: IPUv3H probed [ 2.595121] imx-ipuv3 2800000.ipu: Linked as a consumer to 21cd000.prg [ 2.604020] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.610777] [drm] No driver support for vblank timestamp query. [ 2.618223] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) [ 2.625949] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) [ 2.633748] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) [ 2.641482] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) [ 2.650025] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) [ 2.664783] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) [ 2.673261] [drm] Cannot find any crtc or sizes [ 2.680822] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 2.688889] imx-ipuv3 2800000.ipu: IPUv3H probed [ 2.715521] brd: module loaded [ 2.746880] loop: module loaded [ 2.752175] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.760212] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.768294] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.776491] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.787645] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.794655] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.803520] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.815855] scsi host0: ahci-imx [ 2.820695] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 73 [ 2.836727] CAN device driver interface [ 2.843352] fec 2188000.ethernet: Linked as a consumer to regulator.9 [ 2.853321] pps pps0: new PPS source ptp0 [ 2.894924] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.902566] usbcore: registered new interface driver asix [ 2.908132] usbcore: registered new interface driver ax88179_178a [ 2.914323] usbcore: registered new interface driver cdc_ether [ 2.920301] usbcore: registered new interface driver net1080 [ 2.926052] usbcore: registered new interface driver cdc_subset [ 2.932121] usbcore: registered new interface driver zaurus [ 2.937907] usbcore: registered new interface driver cdc_ncm [ 2.943585] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.950177] ehci-pci: EHCI PCI platform driver [ 2.954730] ehci-mxc: Freescale On-Chip EHCI Host driver [ 2.960936] usbcore: registered new interface driver usb-storage [ 2.970957] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 2.979509] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 2.989573] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.995101] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 3.027695] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 3.037154] hub 1-0:1.0: USB hub found [ 3.041275] hub 1-0:1.0: 1 port detected [ 3.056976] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 3.063530] i2c /dev entries driver [ 3.077062] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 3.083833] Bluetooth: HCI UART driver ver 2.3 [ 3.088354] Bluetooth: HCI UART protocol H4 registered [ 3.093593] Bluetooth: HCI UART protocol LL registered [ 3.100303] sdhci: Secure Digital Host Controller Interface driver [ 3.106503] sdhci: Copyright(c) Pierre Ossman [ 3.110927] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.117969] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 3.158527] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 3.160030] ata1: SATA link down (SStatus 0 SControl 300) [ 3.171418] ahci-imx 2200000.sata: no device found, disabling link. [ 3.177772] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 3.202274] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.210523] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 3.218641] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 3.230869] mmc0: new high speed SDHC card at address 1234 [ 3.241416] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 3.260285] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.274333] caam 2100000.caam: Entropy delay = 3200 [ 3.340087] caam 2100000.caam: Instantiated RNG4 SH0 [ 3.357736] mmc2: new DDR MMC card at address 0001 [ 3.364838] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.370992] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 3.378471] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 3.385502] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (244:0) [ 3.395231] mmcblk2: p1 p2 [ 3.400852] caam 2100000.caam: Instantiated RNG4 SH1 [ 3.405846] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4) [ 3.412356] caam 2100000.caam: job rings = 2, qi = 0 [ 3.417548] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.440801] caam algorithms registered in /proc/crypto [ 3.451976] caam_jr 2101000.jr0: registering rng-caam [ 3.458845] usbcore: registered new interface driver usbhid [ 3.464437] usbhid: USB HID core driver [ 3.474054] imx-media: subdev ipu1_vdic bound [ 3.478892] imx-media: subdev ipu2_vdic bound [ 3.483703] imx-media: subdev ipu1_ic_prp bound [ 3.489857] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video0 [ 3.497223] imx-media: subdev ipu1_ic_prpenc bound [ 3.502698] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video1 [ 3.509691] imx-media: subdev ipu1_ic_prpvf bound [ 3.514560] imx-media: subdev ipu2_ic_prp bound [ 3.519761] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video2 [ 3.526874] imx-media: subdev ipu2_ic_prpenc bound [ 3.532262] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video3 [ 3.539323] imx-media: subdev ipu2_ic_prpvf bound [ 3.545407] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video4 [ 3.551671] imx-media: subdev ipu1_csi0 bound [ 3.556671] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video5 [ 3.562930] imx-media: subdev ipu1_csi1 bound [ 3.567961] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video6 [ 3.574166] imx-media: subdev ipu2_csi0 bound [ 3.579181] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 [ 3.585386] imx-media: subdev ipu2_csi1 bound [ 3.599073] sgtl5000 1-000a: Linked as a consumer to regulator.7 [ 3.605384] sgtl5000 1-000a: Linked as a consumer to regulator.8 [ 3.613326] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 3.623421] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 3.633046] hub 1-1:1.0: USB hub found [ 3.637915] hub 1-1:1.0: 4 ports detected [ 3.668978] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered [ 3.679011] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW [ 3.758359] [drm] Cannot find any crtc or sizes [ 4.078996] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok [ 4.102140] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 4.113920] NET: Registered protocol family 10 [ 4.122080] Segment Routing with IPv6 [ 4.125985] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.133896] NET: Registered protocol family 17 [ 4.138462] can: controller area network core (rev 20170425 abi 9) [ 4.144838] NET: Registered protocol family 29 [ 4.149452] can: raw protocol (rev 20170425) [ 4.153874] can: broadcast manager protocol (rev 20170425 t) [ 4.159652] can: netlink gateway (rev 20170425) max_hops=1 [ 4.165779] Key type dns_resolver registered [ 4.172083] cpu cpu0: Linked as a consumer to regulator.4 [ 4.177802] cpu cpu0: Linked as a consumer to regulator.5 [ 4.183437] cpu cpu0: Linked as a consumer to regulator.6 [ 4.193756] Registering SWP/SWPB emulation handler [ 4.200072] ------------[ cut here ]------------ [ 4.200100] ------------[ cut here ]------------ [ 4.204727] WARNING: CPU: 0 PID: 0 at include/trace/events/lock.h:13 lock_acquire+0x11c/0x1c4 [ 4.209339] WARNING: CPU: 2 PID: 0 at include/trace/events/lock.h:58 lock_release+0x2f0/0x340 [ 4.217853] Modules linked in: [ 4.226374] Modules linked in: [ 4.229431] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.286-cip99 #1 [ 4.239091] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 4.245638] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 4.253394] [] (show_stack) from [] (dump_stack+0xe0/0x114) [ 4.260717] [] (dump_stack) from [] (__warn.part.0+0x90/0xcc) [ 4.268212] [] (__warn.part.0) from [] (warn_slowpath_null+0x40/0x4c) [ 4.276395] [] (warn_slowpath_null) from [] (lock_acquire+0x11c/0x1c4) [ 4.284668] [] (lock_acquire) from [] (_raw_spin_lock+0x28/0x38) [ 4.292425] [] (_raw_spin_lock) from [] (__tick_broadcast_oneshot_control+0x40/0x29c) [ 4.302004] [] (__tick_broadcast_oneshot_control) from [] (cpuidle_enter_state+0x40/0x450) [ 4.312018] [] (cpuidle_enter_state) from [] (do_idle+0x1f0/0x2ec) [ 4.319944] [] (do_idle) from [] (cpu_startup_entry+0x18/0x1c) [ 4.327529] [] (cpu_startup_entry) from [] (start_kernel+0x3b4/0x470) [ 4.335712] [] (start_kernel) from [<00000000>] ( (null)) [ 4.342070] irq event stamp: 17462 [ 4.342076] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.286-cip99 #1 [ 4.342082] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 4.345492] hardirqs last enabled at (17461): [] rcu_idle_exit+0x78/0x264 [ 4.352104] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 4.358624] hardirqs last disabled at (17462): [] do_idle+0x94/0x2ec [ 4.366366] [] (show_stack) from [] (dump_stack+0xe0/0x114) [ 4.374107] softirqs last enabled at (17458): [] irq_enter+0x68/0x84 [ 4.381328] [] (dump_stack) from [] (__warn.part.0+0x90/0xcc) [ 4.388625] softirqs last disabled at (17457): [] irq_enter+0x54/0x84 [ 4.395933] [] (__warn.part.0) from [] (warn_slowpath_null+0x40/0x4c) [ 4.403406] ---[ end trace ec22ba5763556067 ]--- [ 4.410717] [] (warn_slowpath_null) from [] (lock_release+0x2f0/0x340) [ 4.431770] [] (lock_release) from [] (ktime_get+0x6c/0x198) [ 4.439178] [] (ktime_get) from [] (clockevents_program_event+0x5c/0x170) [ 4.447712] [] (clockevents_program_event) from [] (tick_broadcast_set_event+0x44/0xa0) [ 4.457461] [] (tick_broadcast_set_event) from [] (__tick_broadcast_oneshot_control+0x12c/0x29c) [ 4.467993] [] (__tick_broadcast_oneshot_control) from [] (cpuidle_enter_state+0x40/0x450) [ 4.478002] [] (cpuidle_enter_state) from [] (do_idle+0x1f0/0x2ec) [ 4.485924] [] (do_idle) from [] (cpu_startup_entry+0x18/0x1c) [ 4.493500] [] (cpu_startup_entry) from [<1010278c>] (0x1010278c) [ 4.500464] irq event stamp: 12872 [ 4.503874] hardirqs last enabled at (12871): [] rcu_idle_exit+0x78/0x264 [ 4.511621] hardirqs last disabled at (12872): [] do_idle+0x94/0x2ec [ 4.518847] softirqs last enabled at (12868): [] irq_enter+0x68/0x84 [ 4.526159] softirqs last disabled at (12867): [] irq_enter+0x54/0x84 [ 4.533469] ---[ end trace ec22ba5763556068 ]--- [ 4.539665] Loading compiled-in X.509 certificates [ 4.610381] imx-media: subdev ipu1_csi0_mux bound [ 4.615896] imx-media: subdev ipu2_csi1_mux bound [ 4.620845] imx-media: ipu2_csi1:1 -> ipu2_ic_prp:0 [ 4.625750] imx-media: ipu2_csi1:1 -> ipu2_vdic:0 [ 4.630540] imx-media: ipu2_csi1_mux:2 -> ipu2_csi1:0 [ 4.635617] imx-media: ipu2_csi0:1 -> ipu2_ic_prp:0 [ 4.640552] imx-media: ipu2_csi0:1 -> ipu2_vdic:0 [ 4.645293] imx-media: ipu1_csi1:1 -> ipu1_ic_prp:0 [ 4.650228] imx-media: ipu1_csi1:1 -> ipu1_vdic:0 [ 4.654966] imx-media: ipu1_csi0:1 -> ipu1_ic_prp:0 [ 4.659899] imx-media: ipu1_csi0:1 -> ipu1_vdic:0 [ 4.664636] imx-media: ipu1_csi0_mux:2 -> ipu1_csi0:0 [ 4.669765] imx-media: ipu2_ic_prp:1 -> ipu2_ic_prpenc:0 [ 4.675096] imx-media: ipu2_ic_prp:2 -> ipu2_ic_prpvf:0 [ 4.680375] imx-media: ipu1_ic_prp:1 -> ipu1_ic_prpenc:0 [ 4.685705] imx-media: ipu1_ic_prp:2 -> ipu1_ic_prpvf:0 [ 4.690982] imx-media: ipu2_vdic:2 -> ipu2_ic_prp:0 [ 4.695877] imx-media: ipu1_vdic:2 -> ipu1_ic_prp:0 [ 4.708909] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 4.723980] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 4.733480] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.785000] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.792925] ALSA device list: [ 4.795915] #0: imx6-wandboard-sgtl5000 [ 4.800029] #1: imx-spdif [ 4.803580] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.812417] cfg80211: failed to load regulatory.db [ 4.821300] Freeing unused kernel memory: 1024K [ 4.868563] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 5.147556] udevd[184]: starting version 3.2.9 [ 5.154317] random: udevd: uninitialized urandom read (16 bytes read) [ 5.162198] random: udevd: uninitialized urandom read (16 bytes read) [ 5.168831] random: udevd: uninitialized urandom read (16 bytes read) [ 5.185069] udevd[184]: specified user 'tss' unknown [ 5.190268] udevd[184]: specified group 'tss' unknown [ 5.201243] udevd[185]: starting eudev-3.2.9 [ 5.773050] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 [ 5.785611] coda 2040000.vpu: Direct firmware load for vpu/vpu_fw_imx6q.bin failed with error -2 [ 5.798096] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6q.bin failed with error -2 [ 5.807990] coda 2040000.vpu: firmware request failed done Saving random seed: [ 6.203504] random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK Starting dropbear sshd: [ 6.413157] random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-977178/environment . /lava-977178/environment / # /lava-977178/bin/lava-test-runner /lava-977178/0 /lava-977178/bin/lava-test-runner /lava-977178/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-977178/0/tests/0_dmesg + cat uuid + UUID=977178_1.5.2.3.1 [ 7.087148] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 7.175044] [ 7.252163] [ 7.325672] + set +x[ 7.336305] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-977178/environment / # . /lava-977178/environment/lava-977178/bin/lava-test-runner /lava-977178/1 / # /lava-977178/bin/lava-test-runner /lava-977178/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-977178/1/tests/1_bootrr + cat uuid + UUID=977178_1.5.2.3.5 [ 7.892766] + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-977178/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 2184000.usb /lava-977178/1/../bin/lava-test-case [ 9.028414] /lava-977178/1/../bin/lava-test-case [ 9.107155] /lava-977178/1/../bin/lava-test-case [ 9.153023] + set +x[ 9.185980] / #