connecting to NetworkSerialPort(target=Target(name='imx6qp-wandboard-revd1-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4009, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4009 connected to 10.8.254.5 (port 4009) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2020.05.0-00156-g60b1a02e5a-dirty #28 Sat Jun 27 00:22:32 CEST 2020 Board: Technexion EDM1-CF-IMX6 Quad Plus with PMIC and fairy baseboard detected i.MX6 Quad Plus revision 2.0 i.MX reset reason POR (SRSR: 0x00000001) i.MX6 Quad Plus unique ID: e1fdfca7020b09d4 mdio_bus: miibus0: probed imx-usb 2184200.usb@2184200.of: USB EHCI 1.00 imx-esdhc 2190000.usdhc@2190000.of: registered as mmc0 imx-esdhc 2194000.usdhc@2194000.of: registered as mmc1 imx-esdhc 2198000.usdhc@2198000.of: registered as mmc2 imx-ipuv3 2400000.ipu@2400000.of: IPUv3H probed imx-ipuv3 2800000.ipu@2800000.of: IPUv3H probed imx-ldb ldb.of: Neither display timings in ldb node nor remote panel found netconsole: registered as netconsole-1 malloc space: 0x4fe7a7c0 -> 0x8fcf4f7f (size 1022.5 MiB) [?25h Hit m for menu or any to stop autoboot: 3 [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1010131/tftp-deploy-l8s_jd0q/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1010131/tftp-deploy-l8s_jd0q/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1010131/tftp-deploy-l8s_jd0q/kernel/zImage [1;32mbarebox@[1;36mWandboard i.MX6 QuadPlus Board revD1:/[0m bootm -v -r /mnt/tftp/1010131/tftp-deploy-l8s_jd0q/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/1010131/tftp-deploy-l8s_jd0q/dtb/imx6qp-wandboard-revd1.dtb /mnt/tftp/1010131/tftp-deploy-l8s_jd0q/kernel/zImage eth0: 1000Mbps full duplex link detected [33mWARNING:[0m eth0: No MAC address set. Using random address 0e:97:a1:ba:ca:96 T eth0: DHCP client bound to address 10.8.254.225 Loading ARM Linux zImage '/mnt/tftp/1010131/tftp-deploy-l8s_jd0q/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x129a5000 no initrd load address, defaulting to 0x18000000 Loaded initrd GZIP compressed '/mnt/tftp/1010131/tftp-deploy-l8s_jd0q/ramdisk/ramdisk.cpio.gz' initrd is at 0x18000000-0x18cb9425 Loading devicetree from '/mnt/tftp/1010131/tftp-deploy-l8s_jd0q/dtb/imx6qp-wandboard-revd1.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0x129a5000, initrd at 0x18000000, oftree at 0x18cba000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.299-cip104 (KernelCI@build-j19381-arm-gcc-10-multi-v7-defconfig-hd4kn) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP Mon Nov 20 13:07:18 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Wandboard i.MX6 QuadPlus Board revD1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x8b800000 [ 0.000000] percpu: Embedded 16 pages/cpu s36748 r8192 d20596 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752 [ 0.000000] Kernel command line: console=ttymxc0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1978484K/2097152K available (12288K kernel code, 1597K rwdata, 4688K rodata, 2048K init, 394K bss, 53132K reserved, 65536K cma-reserved, 1244148K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (13280 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1598 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 395 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76470001 [ 0.000000] Switching to timer-based delay loop, resolution 333ns [ 0.000006] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns [ 0.000025] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns [ 0.002975] Console: colour dummy device 80x30 [ 0.003018] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) [ 0.003034] CPU: Testing write buffer coherency: ok [ 0.003069] CPU0: Spectre v2: using BPIALL workaround [ 0.003078] pid_max: default: 32768 minimum: 301 [ 0.003223] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003245] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004220] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004951] Setting up static identity map for 0x10300000 - 0x103000a0 [ 0.006555] rcu: Hierarchical SRCU implementation. [ 0.009671] EFI services will not be available. [ 0.009979] smp: Bringing up secondary CPUs ... [ 0.010812] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.010819] CPU1: Spectre v2: using BPIALL workaround [ 0.011777] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.011784] CPU2: Spectre v2: using BPIALL workaround [ 0.012709] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.012715] CPU3: Spectre v2: using BPIALL workaround [ 0.012836] smp: Brought up 1 node, 4 CPUs [ 0.012848] SMP: Total of 4 processors activated (24.00 BogoMIPS). [ 0.012857] CPU: All CPU(s) started in SVC mode. [ 0.013946] devtmpfs: initialized [ 0.020630] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.020994] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021017] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.024247] pinctrl core: initialized pinctrl subsystem [ 0.025860] DMI not present or invalid. [ 0.026663] NET: Registered protocol family 16 [ 0.029714] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.032097] cpuidle: using governor menu [ 0.032255] CPU identified as i.MX6QP, silicon rev 1.0 [ 0.040523] vdd1p1: supplied by regulator-dummy [ 0.041062] vdd3p0: supplied by regulator-dummy [ 0.041565] vdd2p5: supplied by regulator-dummy [ 0.042098] vddarm: supplied by regulator-dummy [ 0.042759] vddpu: supplied by regulator-dummy [ 0.043154] vddsoc: supplied by regulator-dummy [ 0.057571] No ATAGs? [ 0.057721] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.057735] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.061055] imx6q-pinctrl 20e0000.iomuxc: Failed to create dummy-iomuxc-gpr@20e0000 debugfs directory [ 0.061283] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.066161] Serial: AMBA PL011 UART driver [ 0.090225] mxs-dma 110000.dma-apbh: initialized [ 0.092632] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.iomuxc; cannot claim for regulator-usbotgvbus [ 0.092648] imx6q-pinctrl 20e0000.iomuxc: pin-42 (regulator-usbotgvbus) status -22 [ 0.092663] imx6q-pinctrl 20e0000.iomuxc: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.iomuxc [ 0.092675] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.092695] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 [ 0.096211] vgaarb: loaded [ 0.097011] SCSI subsystem initialized [ 0.097461] usbcore: registered new interface driver usbfs [ 0.097517] usbcore: registered new interface driver hub [ 0.097567] usbcore: registered new device driver usb [ 0.098629] i2c i2c-0: IMX I2C adapter registered [ 0.098649] i2c i2c-0: can't use DMA, using PIO instead. [ 0.099230] i2c i2c-1: IMX I2C adapter registered [ 0.099248] i2c i2c-1: can't use DMA, using PIO instead. [ 0.099883] i2c i2c-2: IMX I2C adapter registered [ 0.099900] i2c i2c-2: can't use DMA, using PIO instead. [ 0.101375] pps_core: LinuxPPS API ver. 1 registered [ 0.101384] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.101404] PTP clock support registered [ 0.101635] EDAC MC: Ver: 3.0.0 [ 0.104311] clocksource: Switched to clocksource mxc_timer1 [ 0.165463] NET: Registered protocol family 2 [ 0.165837] IP idents hash table entries: 16384 (order: 5, 131072 bytes) [ 0.167041] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.167080] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.167166] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.167310] TCP: Hash tables configured (established 8192 bind 8192) [ 0.167490] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.167529] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.167694] NET: Registered protocol family 1 [ 0.168262] RPC: Registered named UNIX socket transport module. [ 0.168273] RPC: Registered udp transport module. [ 0.168280] RPC: Registered tcp transport module. [ 0.168288] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.168732] Trying to unpack rootfs image as initramfs... [ 1.284893] Freeing initrd memory: 13032K [ 1.285482] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 1.285856] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.287786] Initialise system trusted keyrings [ 1.288067] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.294111] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.294867] NFS: Registering the id_resolver key type [ 1.294973] Key type id_resolver registered [ 1.294982] Key type id_legacy registered [ 1.295030] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.297276] Key type asymmetric registered [ 1.297289] Asymmetric key parser 'x509' registered [ 1.297343] bounce: pool size: 64 pages [ 1.297389] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.297401] io scheduler noop registered [ 1.297411] io scheduler deadline registered [ 1.297540] io scheduler cfq registered (default) [ 1.297553] io scheduler mq-deadline registered [ 1.297562] io scheduler kyber registered [ 1.330378] imx-pgc-pd imx-pgc-power-domain.0: DMA mask not set [ 1.330447] imx-pgc-pd imx-pgc-power-domain.0: Linked as a consumer to 20dc000.gpc [ 1.330507] imx-pgc-pd imx-pgc-power-domain.1: DMA mask not set [ 1.330595] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to regulator.5 [ 1.330805] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 1.330822] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 1.330857] PU : no governor for states [ 1.330875] imx-pgc-pd imx-pgc-power-domain.1: Linked as a consumer to 20dc000.gpc [ 1.388024] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.391523] SuperH (H)SCI(F) driver initialized [ 1.392368] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 26, base_baud = 5000000) is a IMX [ 2.278637] console [ttymxc0] enabled [ 2.283167] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 66, base_baud = 5000000) is a IMX [ 2.292994] msm_serial: driver initialized [ 2.297371] STMicroelectronics ASC driver initialized [ 2.304142] STM32 USART driver initialized [ 2.326257] brd: module loaded [ 2.335835] loop: module loaded [ 2.342073] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 [ 2.350053] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 [ 2.358084] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 [ 2.366284] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 2.376784] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 2.383779] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.392612] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 2.403026] scsi host0: ahci-imx [ 2.406825] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 73 [ 2.425095] CAN device driver interface [ 2.430122] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 2.436943] fec 2188000.ethernet: Linked as a consumer to regulator.9 [ 2.445814] pps pps0: new PPS source ptp0 [ 2.477066] fec 2188000.ethernet eth0: registered PHC device 0 [ 2.484164] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.490039] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.496041] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 2.503006] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.514044] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 2.521515] usbcore: registered new interface driver pegasus [ 2.527243] usbcore: registered new interface driver asix [ 2.532679] usbcore: registered new interface driver ax88179_178a [ 2.538834] usbcore: registered new interface driver cdc_ether [ 2.544736] usbcore: registered new interface driver smsc75xx [ 2.550526] usbcore: registered new interface driver smsc95xx [ 2.556328] usbcore: registered new interface driver net1080 [ 2.562020] usbcore: registered new interface driver cdc_subset [ 2.567992] usbcore: registered new interface driver zaurus [ 2.573644] usbcore: registered new interface driver cdc_ncm [ 2.582044] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.588616] ehci-pci: EHCI PCI platform driver [ 2.593104] ehci-platform: EHCI generic platform driver [ 2.598631] ehci-orion: EHCI orion driver [ 2.602849] SPEAr-ehci: EHCI SPEAr driver [ 2.607081] ehci-st: EHCI STMicroelectronics driver [ 2.612143] ehci-exynos: EHCI EXYNOS driver [ 2.616532] ehci-atmel: EHCI Atmel driver [ 2.620714] tegra-ehci: Tegra EHCI driver [ 2.624962] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.631177] ohci-pci: OHCI PCI platform driver [ 2.635692] ohci-platform: OHCI generic platform driver [ 2.641175] SPEAr-ohci: OHCI SPEAr driver [ 2.645391] ohci-st: OHCI STMicroelectronics driver [ 2.650451] ohci-atmel: OHCI Atmel driver [ 2.655429] usbcore: registered new interface driver usb-storage [ 2.663654] imx_usb 2184200.usb: 2184200.usb supply vbus not found, using dummy regulator [ 2.671911] imx_usb 2184200.usb: Linked as a consumer to regulator.0 [ 2.681790] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.686730] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 2.714340] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.720459] hub 1-0:1.0: USB hub found [ 2.724253] hub 1-0:1.0: 1 port detected [ 2.734223] i2c /dev entries driver [ 2.745877] ata1: SATA link down (SStatus 0 SControl 300) [ 2.751320] ahci-imx 2200000.sata: no device found, disabling link. [ 2.751418] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 2.757626] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug [ 2.775734] sdhci: Secure Digital Host Controller Interface driver [ 2.781919] sdhci: Copyright(c) Pierre Ossman [ 2.788399] Synopsys Designware Multimedia Card Interface Driver [ 2.796336] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.802793] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 2.840434] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 2.880261] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.887978] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 2.897618] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.911767] mmc0: new high speed SDHC card at address 1234 [ 2.918812] mmcblk0: mmc0:1234 SA04G 3.64 GiB [ 2.931049] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 2.942145] ledtrig-cpu: registered to indicate activity on CPUs [ 2.949162] usbcore: registered new interface driver usbhid [ 2.954761] usbhid: USB HID core driver [ 2.964431] NET: Registered protocol family 10 [ 2.970144] Segment Routing with IPv6 [ 2.973890] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.980419] NET: Registered protocol family 17 [ 2.984906] can: controller area network core (rev 20170425 abi 9) [ 2.991161] NET: Registered protocol family 29 [ 2.995637] can: raw protocol (rev 20170425) [ 2.999914] can: broadcast manager protocol (rev 20170425 t) [ 3.005600] can: netlink gateway (rev 20170425) max_hops=1 [ 3.011511] Key type dns_resolver registered [ 3.016821] cpu cpu0: Linked as a consumer to regulator.4 [ 3.022283] cpu cpu0: Linked as a consumer to regulator.5 [ 3.027770] cpu cpu0: Linked as a consumer to regulator.6 [ 3.034010] ThumbEE CPU extension supported. [ 3.038336] Registering SWP/SWPB emulation handler [ 3.043758] Loading compiled-in X.509 certificates [ 3.065685] usb 1-1: new high-speed USB device number 2 using ci_hdrc [ 3.072193] imx_thermal tempmon: Automotive CPU temperature grade - max:125C critical:120C passive:115C [ 3.085752] hctosys: unable to open rtc device (rtc0) [ 3.095037] Freeing unused kernel memory: 2048K [ 3.099885] Run /init as init process [ 3.135033] mmc2: new DDR MMC card at address 0001 [ 3.142327] mmcblk2: mmc2:0001 S10004 3.56 GiB [ 3.149043] mmcblk2boot0: mmc2:0001 S10004 partition 1 4.00 MiB [ 3.156594] mmcblk2boot1: mmc2:0001 S10004 partition 2 4.00 MiB [ 3.162798] mmcblk2rpmb: mmc2:0001 S10004 partition 3 4.00 MiB, chardev (235:0) Starting syslogd: [ 3.171602] mmcblk2: p1 p2 OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 3.234912] udevd[110]: starting version 3.2.9 [ 3.240277] random: udevd: uninitialized urandom read (16 bytes read) [ 3.247859] random: udevd: uninitialized urandom read (16 bytes read) [ 3.254429] random: udevd: uninitialized urandom read (16 bytes read) [ 3.268275] udevd[110]: specified user 'tss' unknown [ 3.273357] udevd[110]: specified group 'tss' unknown [ 3.281289] udevd[111]: starting eudev-3.2.9 [ 3.292930] hub 1-1:1.0: USB hub found [ 3.297288] hub 1-1:1.0: 4 ports detected [ 3.585917] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv]) [ 3.596599] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv]) [ 3.606403] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv]) [ 3.612976] etnaviv-gpu 130000.gpu: model: GC3000, revision: 5450 [ 3.625876] etnaviv-gpu 134000.gpu: model: GC320, revision: 5303 [ 3.636915] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1216 [ 3.643038] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 3.650386] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 [ 3.745032] sgtl5000 1-000a: Linked as a consumer to regulator.7 [ 3.751258] sgtl5000 1-000a: Linked as a consumer to regulator.8 [ 3.764241] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 3.802767] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum done Saving random seed: OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-1010131/environment . /lava-1010131/environment / # /lava-1010131/bin/lava-test-runner /lava-1010131/0 /lava-1010131/bin/lava-test-runner /lava-1010131/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-1010131/0/tests/0_dmesg + cat uuid [ 4.713385] + UUID=1010131_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 4.757556] [ 4.798058] [ 4.839292] + set +x [ 4.849076] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-1010131/environment / # . /lava-1010131/environment/lava-1010131/bin/lava-test-runner /lava-1010131/1 / # /lava-1010131/bin/lava-test-runner /lava-1010131/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-1010131/1/tests/1_bootrr + cat uuid [ 5.336150] + UUID=1010131_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/libexec/bootrr/helpers:/lava-1010131/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr/libexec/bootrr + sh helpers/bootrr-auto 2184000.usb /lava-1010131/1/../bin/lava-test-case [ 6.419754] /lava-1010131/1/../bin/lava-test-case [ 6.461055] /lava-1010131/1/../bin/lava-test-case [ 6.486902] + set +x [ 6.506056] / #