[Enter `^Ec?' for help] NOTICE: BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.12 NOTICE: BL2: PRR is R-Car M3 ES1.0 NOTICE: BL2: Boot device is HyperFlash(80MHz) NOTICE: BL2: LCM state is CM NOTICE: BL2: AVS setting succeeded. DVFS_SetVID=0x52 NOTICE: BL2: DDR3200(rev.0.20)[COLD_BOOT]..0 NOTICE: BL2: DRAM Split is OFF NOTICE: BL2: QoS is default setting(rev.0.16) NOTICE: BL2: v1.3(release):a80bbf3 NOTICE: BL2: Built : 22:16:12, Mar 30 2017 NOTICE: BL2: Normal boot NOTICE: BL2: dst=0xe6316190 src=0x8180000 len=512(0x200) NOTICE: BL2: dst=0x43f00000 src=0x8180400 len=6144(0x1800) NOTICE: BL2: dst=0x44000000 src=0x81c0000 len=65536(0x10000) NOTICE: BL2: dst=0x44100000 src=0x8200000 len=524288(0x80000) NOTICE: BL2: dst=0x50000000 src=0x8640000 len=1048576(0x100000) U-Boot 2020.04+dfsg-2co5bv2022dev0b2 (Nov 03 2020 - 09:02:07 +0000) CPU: Renesas Electronics R8A7796 rev 1.0 Model: Renesas M3ULCB board based on r8a7796 DRAM: 1.9 GiB Bank #0: 0x048000000 - 0x07fffffff, 896 MiB Bank #1: 0x600000000 - 0x63fffffff, 1 GiB MMC: sd@ee100000: 0, sd@ee140000: 1 Loading Environment from MMC... OK In: serial@e6e88000 Out: serial@e6e88000 Err: serial@e6e88000 Net: eth0: ethernet@e6800000 Hit any key to stop autoboot: 99  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffffffffffff setenv initrd_high 0xffffffffffffffff => setenv fdt_high 0xffffffffffffffff setenv fdt_high 0xffffffffffffffff => dhcp dhcp ethernet@e6800000 Waiting for PHY auto negotiation to complete.......... done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.201.20 (762 ms) => setenv serverip 192.168.201.1 setenv serverip 192.168.201.1 => tftp 0x68080000 14064674/tftp-deploy-u5amyghl/kernel/Image tftp 0x68080000 14064674/tftp-deploy-u5amyghl/kernel/Image Using ethernet@e6800000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.20 Filename '14064674/tftp-deploy-u5amyghl/kernel/Image'. Load address: 0x68080000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################ 19.4 MiB/s done Bytes transferred = 19307008 (1269a00 hex) => tftp 0x4a000000 14064674/tftp-deploy-u5amyghl/ramdisk/ramdisk.cpio.gz.uboot tftp 0x4a000000 14064674/tftp-deploy-u5amyghl/ramdisk/ramdisk.cpio.gz.uboot Using ethernet@e6800000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.20 Filename '14064674/tftp-deploy-u5amyghl/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x4a000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################# 5.8 MiB/s done Bytes transferred = 15201655 (e7f577 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x68000000 14064674/tftp-deploy-u5amyghl/dtb/r8a7796-m3ulcb.dtb tftp 0x68000000 14064674/tftp-deploy-u5amyghl/dtb/r8a7796-m3ulcb.dtb Using ethernet@e6800000 device TFTP from server 192.168.201.1; our IP address is 192.168.201.20 Filename '14064674/tftp-deploy-u5amyghl/dtb/r8a7796-m3ulcb.dtb'. Load address: 0x68000000 Loading: *#### 6.3 MiB/s done Bytes transferred = 52637 (cd9d hex) => setenv bootargs 'console=ttySC0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttySC0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => booti 0x68080000 0x4a000000 0x68000000 booti 0x68080000 0x4a000000 0x68000000 ## Loading init Ramdisk from Legacy Image at 4a000000 ... Image Name: Image Type: AArch64 Linux RAMDisk Image (uncompressed) Data Size: 15201591 Bytes = 14.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 68000000 Booting using the fdt blob at 0x68000000 Using Device Tree in place at 0000000068000000, end 000000006800fd9c Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd073] [ 0.000000] Linux version 4.19.315-cip109 (KernelCI@build-j208774-arm64-gcc-10-defconfig-2vngd) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1 SMP PREEMPT Tue May 28 14:43:16 UTC 2024 [ 0.000000] Machine model: Renesas M3ULCB board based on r8a7796 [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 32 MiB at 0x000000007e000000 [ 0.000000] earlycon: scif0 at MMIO 0x00000000e6e88000 (options '115200n8') [ 0.000000] bootconsole [scif0] enabled [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000048000000-0x000000063fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x63ffb3a40-0x63ffb51ff] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000048000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000063fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000048000000-0x000000007fffffff] [ 0.000000] node 0: [mem 0x0000000600000000-0x000000063fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000048000000-0x000000063fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 22 pages/cpu s52760 r8192 d29160 u90112 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware [ 0.000000] CPU features: enabling workaround for EL2 vector hardening [ 0.000000] CPU features: enabling workaround for Spectre-BHB [ 0.000000] CPU features: enabling workaround for ARM erratum 1742098 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 483840 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=ttySC0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] software IO TLB: mapped [mem 0x79fff000-0x7dfff000] (64MB) <6>[ 0.000000] Memory: 1799252K/1966080K available (11196K kernel code, 1382K rwdata, 4972K rodata, 1280K init, 377K bss, 134060K reserved, 32768K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 <6>[ 0.000000] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. <6>[ 0.000000] Tasks RCU enabled. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 <6>[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 <6>[ 0.000000] arch_timer: cp15 timer(s) running at 8.33MHz (virt). <6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1ec02923e, max_idle_ns: 440795202125 ns <6>[ 0.000003] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every 2199023255496ns <6>[ 0.008352] Console: colour dummy device 80x25 <6>[ 0.013088] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.66 BogoMIPS (lpj=33333) <6>[ 0.023562] pid_max: default: 32768 minimum: 301 <6>[ 0.028455] Security Framework initialized <6>[ 0.033645] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) <6>[ 0.041463] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) <6>[ 0.048774] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) <6>[ 0.055715] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) <6>[ 0.063973] ASID allocator initialised with 32768 entries <6>[ 0.069694] rcu: Hierarchical SRCU implementation. <6>[ 0.075619] Detected Renesas R-Car Gen3 r8a7796 ES1.0 <6>[ 0.081817] EFI services will not be available. <6>[ 0.086823] smp: Bringing up secondary CPUs ... <6>[ 0.091983] Detected PIPT I-cache on CPU1 <6>[ 0.092019] CPU1: Booted secondary processor 0x0000000001 [0x411fd073] <3>[ 0.092333] psci: failed to boot CPU2 (-22) <3>[ 0.107776] CPU2: failed to boot: -22 <3>[ 0.111979] psci: failed to boot CPU3 (-22) <3>[ 0.116414] CPU3: failed to boot: -22 <3>[ 0.120613] psci: failed to boot CPU4 (-22) <3>[ 0.125050] CPU4: failed to boot: -22 <3>[ 0.129231] psci: failed to boot CPU5 (-22) <3>[ 0.133662] CPU5: failed to boot: -22 <6>[ 0.137605] smp: Brought up 1 node, 2 CPUs <6>[ 0.141944] SMP: Total of 2 processors activated. <6>[ 0.146895] CPU features: detected: 32-bit EL0 Support <6>[ 0.152741] CPU: All CPU(s) started at EL1 <6>[ 0.157089] alternatives: patching kernel code <6>[ 0.162579] devtmpfs: initialized <6>[ 0.170066] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns <6>[ 0.180079] futex hash table entries: 2048 (order: 5, 131072 bytes) <6>[ 0.187209] pinctrl core: initialized pinctrl subsystem <6>[ 0.194023] DMI not present or invalid. <6>[ 0.198509] NET: Registered protocol family 16 <6>[ 0.203383] audit: initializing netlink subsys (disabled) <5>[ 0.209115] audit: type=2000 audit(0.140:1): state=initialized audit_enabled=0 res=1 <6>[ 0.217102] cpuidle: using governor menu <6>[ 0.221422] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. <6>[ 0.228973] DMA: preallocated 256 KiB pool for atomic allocations <6>[ 0.236331] Serial: AMBA PL011 UART driver <6>[ 0.243006] sh-pfc e6060000.pin-controller: r8a77960_pfc support registered <6>[ 0.274958] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.282222] cryptd: max_cpu_qlen set to 1000 <6>[ 0.287481] ACPI: Interpreter disabled. <6>[ 0.294871] vgaarb: loaded <5>[ 0.298034] SCSI subsystem initialized <6>[ 0.302646] usbcore: registered new interface driver usbfs <6>[ 0.308463] usbcore: registered new interface driver hub <6>[ 0.314225] usbcore: registered new device driver usb <6>[ 0.320421] i2c-sh_mobile e60b0000.i2c: I2C adapter 7, bus speed 100000 Hz <6>[ 0.327902] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.333110] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.342468] PTP clock support registered <6>[ 0.346744] EDAC MC: Ver: 3.0.0 <6>[ 0.350987] Advanced Linux Sound Architecture Driver Initialized. <6>[ 0.357744] clocksource: Switched to clocksource arch_sys_counter <5>[ 0.364181] VFS: Disk quotas dquot_6.6.0 <6>[ 0.368389] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 0.375601] pnp: PnP ACPI: disabled <6>[ 0.383341] NET: Registered protocol family 2 <6>[ 0.388264] IP idents hash table entries: 32768 (order: 6, 262144 bytes) <6>[ 0.395923] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes) <6>[ 0.404015] TCP established hash table entries: 16384 (order: 5, 131072 bytes) <6>[ 0.411529] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) <6>[ 0.418533] TCP: Hash tables configured (established 16384 bind 16384) <6>[ 0.425417] UDP hash table entries: 1024 (order: 3, 32768 bytes) <6>[ 0.431683] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) <6>[ 0.438458] NET: Registered protocol family 1 <6>[ 0.443371] RPC: Registered named UNIX socket transport module. <6>[ 0.449581] RPC: Registered udp transport module. <6>[ 0.454526] RPC: Registered tcp transport module. <6>[ 0.459466] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.466239] Unpacking initramfs... <6>[ 0.952057] Freeing initrd memory: 14840K <6>[ 0.956624] hw perfevents: /pmu_a53: failed to probe PMU! <6>[ 0.962272] hw perfevents: /pmu_a53: failed to register PMU devices! <6>[ 0.969016] hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7 counters available <6>[ 0.977700] kvm [1]: HYP mode not available <5>[ 0.984425] Initialise system trusted keyrings <6>[ 0.989289] workingset: timestamp_bits=44 max_order=19 bucket_order=0 <6>[ 0.999471] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 1.006389] NFS: Registering the id_resolver key type <5>[ 1.011714] Key type id_resolver registered <5>[ 1.016145] Key type id_legacy registered <6>[ 1.020409] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 1.027363] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 1.035116] 9p: Installing v9fs 9p2000 file system support <5>[ 1.042630] Key type asymmetric registered <5>[ 1.046989] Asymmetric key parser 'x509' registered <6>[ 1.052161] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) <6>[ 1.059790] io scheduler noop registered <6>[ 1.063956] io scheduler deadline registered <6>[ 1.068565] io scheduler cfq registered (default) <6>[ 1.073513] io scheduler mq-deadline registered <6>[ 1.078283] io scheduler kyber registered <6>[ 1.088269] gpio_rcar e6050000.gpio: driving 16 GPIOs <6>[ 1.093812] gpio_rcar e6051000.gpio: driving 29 GPIOs <6>[ 1.099316] gpio_rcar e6052000.gpio: driving 15 GPIOs <6>[ 1.104785] gpio_rcar e6053000.gpio: driving 16 GPIOs <6>[ 1.110285] gpio_rcar e6054000.gpio: driving 18 GPIOs <6>[ 1.115743] gpio_rcar e6055000.gpio: driving 26 GPIOs <6>[ 1.121205] gpio_rcar e6055400.gpio: driving 32 GPIOs <6>[ 1.126667] gpio_rcar e6055800.gpio: driving 4 GPIOs <4>[ 1.134129] EINJ: ACPI disabled. <6>[ 1.144720] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.153613] SuperH (H)SCI(F) driver initialized <6>[ 1.158820] e6e88000.serial: ttySC0 at MMIO 0xe6e88000 (irq = 112, base_baud = 0) is a scif <6>[ 1.167566] console [ttySC0] enabled <6>[ 1.167566] console [ttySC0] enabled <6>[ 1.175234] bootconsole [scif0] disabled <6>[ 1.175234] bootconsole [scif0] disabled <6>[ 1.184379] msm_serial: driver initialized <6>[ 1.193510] loop: module loaded <6>[ 1.200672] tun: Universal TUN/TAP device driver, 1.6 <6>[ 1.206852] thunder_xcv, ver 1.0 <6>[ 1.210390] thunder_bgx, ver 1.0 <6>[ 1.213916] nicpf, ver 1.0 <6>[ 1.217286] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k <6>[ 1.223384] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.229605] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k <6>[ 1.236828] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.242684] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k <6>[ 1.250774] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. <6>[ 1.257235] sky2: driver version 1.30 <6>[ 1.262062] VFIO - User Level meta-driver version: 0.3 <6>[ 1.268444] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 1.275240] ehci-pci: EHCI PCI platform driver <6>[ 1.279970] ehci-platform: EHCI generic platform driver <6>[ 1.285714] ehci-platform ee0a0100.usb: EHCI Host Controller <6>[ 1.291660] ehci-platform ee0a0100.usb: new USB bus registered, assigned bus number 1 <6>[ 1.300037] ehci-platform ee0a0100.usb: irq 147, io mem 0xee0a0100 <6>[ 1.321758] ehci-platform ee0a0100.usb: USB 2.0 started, EHCI 1.10 <6>[ 1.328596] hub 1-0:1.0: USB hub found <6>[ 1.332627] hub 1-0:1.0: 1 port detected <6>[ 1.337078] ehci-orion: EHCI orion driver <6>[ 1.341524] ehci-exynos: EHCI EXYNOS driver <6>[ 1.346055] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 1.352507] ohci-pci: OHCI PCI platform driver <6>[ 1.357266] ohci-platform: OHCI generic platform driver <6>[ 1.362931] ohci-platform ee0a0000.usb: Generic Platform OHCI controller <6>[ 1.369910] ohci-platform ee0a0000.usb: new USB bus registered, assigned bus number 2 <6>[ 1.378094] ohci-platform ee0a0000.usb: irq 147, io mem 0xee0a0000 <6>[ 1.472120] hub 2-0:1.0: USB hub found <6>[ 1.476149] hub 2-0:1.0: 1 port detected <6>[ 1.480568] ohci-exynos: OHCI EXYNOS driver <6>[ 1.485515] usbcore: registered new interface driver usb-storage <6>[ 1.493947] i2c /dev entries driver <6>[ 1.505447] cs2000-cp 2-004f: revision - C1 <6>[ 1.509950] i2c-rcar e6510000.i2c: probed <6>[ 1.520091] i2c-rcar e66d8000.i2c: probed <6>[ 1.529931] rcar_gen3_thermal e6198000.thermal: TSC0: Loaded 2 trip points <6>[ 1.541196] rcar_gen3_thermal e6198000.thermal: TSC1: Loaded 2 trip points <6>[ 1.552444] rcar_gen3_thermal e6198000.thermal: TSC2: Loaded 2 trip points <4>[ 1.562027] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1499999 KHz <4>[ 1.569771] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz <6>[ 1.579327] sdhci: Secure Digital Host Controller Interface driver <6>[ 1.585842] sdhci: Copyright(c) Pierre Ossman <6>[ 1.591206] renesas_sdhi_internal_dmac ee100000.sd: Got CD GPIO <6>[ 1.597969] renesas_sdhi_internal_dmac ee140000.sd: Linked as a consumer to regulator.2 <6>[ 1.606285] renesas_sdhi_internal_dmac ee140000.sd: Linked as a consumer to regulator.1 <6>[ 1.662996] renesas_sdhi_internal_dmac ee140000.sd: mmc0 base at 0xee140000 max clock rate 200 MHz <6>[ 1.672367] Synopsys Designware Multimedia Card Interface Driver <6>[ 1.679460] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 1.686719] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 1.693805] usbcore: registered new interface driver usbhid <6>[ 1.699725] usbhid: USB HID core driver <6>[ 1.706432] NET: Registered protocol family 17 <6>[ 1.711369] 9pnet: Installing 9P2000 support <5>[ 1.716004] Key type dns_resolver registered <6>[ 1.720958] registered taskstats version 1 <5>[ 1.725368] Loading compiled-in X.509 certificates <6>[ 1.736666] renesas_irqc e61c0000.interrupt-controller: driving 6 irqs <6>[ 1.748626] bd9571mwv 7-0030: Device: BD9571MWV rev. 1 <6>[ 1.762888] renesas_sdhi_internal_dmac ee100000.sd: Got CD GPIO <6>[ 1.769193] renesas_sdhi_internal_dmac ee100000.sd: Linked as a consumer to regulator.3 <6>[ 1.777493] renesas_sdhi_internal_dmac ee100000.sd: Linked as a consumer to regulator.4 <6>[ 1.811268] mmc0: new HS200 MMC card at address 0001 <6>[ 1.816907] mmcblk0: mmc0:0001 R1J55A 7.28 GiB <6>[ 1.821884] mmcblk0boot0: mmc0:0001 R1J55A partition 1 8.00 MiB <6>[ 1.828239] mmcblk0boot1: mmc0:0001 R1J55A partition 2 8.00 MiB <6>[ 1.833975] renesas_sdhi_internal_dmac ee100000.sd: mmc1 base at 0xee100000 max clock rate 200 MHz <6>[ 1.843822] mmcblk0rpmb: mmc0:0001 R1J55A partition 3 4.00 MiB, chardev (239:0) <4>[ 1.847379] rcar-dmac e6700000.dma-controller: ignoring dependency for device, assuming no driver <4>[ 1.863250] rcar-dmac e7300000.dma-controller: ignoring dependency for device, assuming no driver <4>[ 1.874114] GPT:Primary header thinks Alt. header is not at the end of the disk. <4>[ 1.882063] rcar-dmac e7310000.dma-controller: ignoring dependency for device, assuming no driver <4>[ 1.882407] GPT:7812499 != 15269887 <4>[ 1.893922] rcar-dmac ec700000.dma-controller: ignoring dependency for device, assuming no driver <4>[ 1.896089] GPT:Alternate GPT header not at the end of the disk. <4>[ 1.907003] rcar-dmac ec720000.dma-controller: ignoring dependency for device, assuming no driver <4>[ 1.911241] GPT:7812499 != 15269887 <4>[ 1.923065] ravb e6800000.ethernet: ignoring dependency for device, assuming no driver <4>[ 1.924105] GPT: Use GNU Parted to correct GPT errors. <6>[ 1.937133] mmcblk0: p1 p2 p3 <6>[ 1.947278] ravb e6800000.ethernet eth0: Base address at 0xe6800000, 2e:09:0a:01:9a:9c, IRQ 109. <6>[ 1.957307] input: keyboard as /devices/platform/keyboard/input/input0 <6>[ 1.964337] hctosys: unable to open rtc device (rtc0) <6>[ 2.050939] Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=164) <6>[ 2.102924] mmc1: new ultra high speed SDR50 SDHC card at address 0001 <6>[ 2.110121] mmcblk1: mmc1:0001 SD 14.6 GiB <4>[ 2.123688] GPT:Primary header thinks Alt. header is not at the end of the disk. <4>[ 2.131356] GPT:7812499 != 30560255 <4>[ 2.135108] GPT:Alternate GPT header not at the end of the disk. <4>[ 2.141373] GPT:7812499 != 30560255 <4>[ 2.145121] GPT: Use GNU Parted to correct GPT errors. <6>[ 2.150534] mmcblk1: p1 p2 p3 <6>[ 8.470660] ravb e6800000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off <5>[ 8.497750] Sending DHCP requests .., OK <6>[ 10.773953] IP-Config: Got DHCP answer from 192.168.201.1, my address is 192.168.201.20 <6>[ 10.782217] IP-Config: Complete: <6>[ 10.785702] device=eth0, hwaddr=2e:09:0a:01:9a:9c, ipaddr=192.168.201.20, mask=255.255.255.0, gw=192.168.201.1 <6>[ 10.796398] host=r8a7796-m3ulcb-cbg-0, domain=lava-rack, nis-domain=(none) <6>[ 10.803967] bootserver=192.168.201.1, rootserver=192.168.201.1, rootpath= <6>[ 10.803969] nameserver0=192.168.201.1 <6>[ 10.816387] ALSA device list: <6>[ 10.819630] No soundcards found. <6>[ 10.824257] Freeing unused kernel memory: 1280K <6>[ 10.829112] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 10.879737] udevd[1738]: starting version 3.2.9 <5>[ 10.885185] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 10.892058] random: udevd: uninitialized urandom read (16 bytes read) <5>[ 10.898886] random: udevd: uninitialized urandom read (16 bytes read) <27>[ 10.908503] udevd[1738]: specified user 'tss' unknown <27>[ 10.913997] udevd[1738]: specified group 'tss' unknown <30>[ 10.920501] udevd[1739]: starting eudev-3.2.9 <4>[ 11.122542] rcar-fcp fe9af000.fcp: ignoring dependency for device, assuming no driver <6>[ 11.135799] media: Linux media interface: v0.10 <6>[ 11.154386] rcar_sound ec500000.sound: probed <6>[ 11.199874] videodev: Linux video capture interface: v2.00 <4>[ 11.223311] rcar-fcp fea27000.fcp: ignoring dependency for device, assuming no driver <4>[ 11.246778] rcar-fcp fea2f000.fcp: ignoring dependency for device, assuming no driver <4>[ 11.256508] rcar-fcp fea37000.fcp: ignoring dependency for device, assuming no driver <6>[ 11.315982] rcar_fdp1 fe940000.fdp1: Device registered as /dev/video6 <6>[ 11.331045] asoc-simple-card sound: ak4613-hifi <-> ec500000.sound mapping ok <4>[ 11.355345] asoc-simple-card sound: ASoC: no DMI vendor name! <6>[ 11.367896] rcar-dw-hdmi fead0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (DWC HDMI 2.0 TX PHY) <6>[ 11.369499] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). <6>[ 11.378367] rcar-dw-hdmi fead0000.hdmi: registered DesignWare HDMI I2C bus driver <6>[ 11.419275] [drm] No driver support for vblank timestamp query. <6>[ 11.428293] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). <6>[ 11.436958] [drm] No driver support for vblank timestamp query. <6>[ 11.564813] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). <6>[ 11.573981] [drm] No driver support for vblank timestamp query. <6>[ 11.585479] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). <6>[ 11.596059] [drm] No driver support for vblank timestamp query. <6>[ 11.604093] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). <6>[ 11.611044] [drm] No driver support for vblank timestamp query. done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: <6>[ 11.899380] NET: Registered protocol family 10 <6>[ 11.905089] Segment Routing with IPv6 OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-14064674/environment . /lava-14064674/environment / # /lava-14064674/bin/lava-test-runner /lava-14064674/0 /lava-14064674/bin/lava-test-runner /lava-14064674/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava<8>[ 12.458115] -14064674/0/tests/0_dmesg + cat uuid + UUID=14064674_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 12.478625] <8>[ 12.498439] <8>[ 12.518552] + set +x <8>[ 12.527843] / #