Trying 192.168.56.22... Connected to conserv3. Escape character is '^]'. ser2net port telnet,3001 device serialdev, /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.2.2.4:1.0-port0, 115200n81, local=false [] (Debian GNU/Linux) U-Boot SPL 2023.01-rc4-00047-g3089d12a02 (Jan 01 2023 - 22:23:32 +0000) Trying to boot from MMC1 U-Boot 2023.01-rc4-00047-g3089d12a02 (Jan 01 2023 - 22:23:32 +0000) CPU : AM335X-GP rev 2.0 Model: TI AM335x BeagleBone Black DRAM: 512 MiB Core: 160 devices, 18 uclasses, devicetree: separate WDT: Started wdt@44e35000 with servicing every 1000ms (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1... not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Hit any key to stop autoboot: 2  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.6.28 (286 ms) => setenv serverip 192.168.6.2 setenv serverip 192.168.6.2 => tftp 0x82000000 703753/tftp-deploy-y59argte/kernel/zImage tftp 0x82000000 703753/tftp-deploy-y59argte/kernel/zImage link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.6.2; our IP address is 192.168.6.28 Filename '703753/tftp-deploy-y59argte/kernel/zImage'. Load address: 0x82000000 Loading: *################################################## 8.3 MiB 4.9 MiB/s done Bytes transferred = 8729088 (853200 hex) => tftp 0x83000000 703753/tftp-deploy-y59argte/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 703753/tftp-deploy-y59argte/ramdisk/ramdisk.cpio.gz.uboot link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.6.2; our IP address is 192.168.6.28 Filename '703753/tftp-deploy-y59argte/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *T ################################################## 12.7 MiB 1.7 MiB/s done Bytes transferred = 13309364 (cb15b4 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x88000000 703753/tftp-deploy-y59argte/dtb/am335x-boneblack.dtb tftp 0x88000000 703753/tftp-deploy-y59argte/dtb/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 192.168.6.2; our IP address is 192.168.6.28 Filename '703753/tftp-deploy-y59argte/dtb/am335x-boneblack.dtb'. Load address: 0x88000000 Loading: *################################################## 34.1 KiB 3.7 MiB/s done Bytes transferred = 34893 (884d hex) => setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' setenv bootargs 'console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp' => bootz 0x82000000 0x83000000 0x88000000 bootz 0x82000000 0x83000000 0x88000000 Kernel image @ 0x82000000 [ 0x000000 - 0x853200 ] ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Created: 2024-09-04 15:59:57 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 13309300 Bytes = 12.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Working FDT set to 88000000 Using Device Tree in place at 88000000, end 8800b84c Working FDT set to 88000000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.321-cip112 (KernelCI@build-j307304-arm-gcc-12-multi-v7-defconfig-v8qkl) (gcc version 12.2.0 (Debian 12.2.0-14)) #1 SMP Wed Sep 4 15:43:02 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black [ 0.000000] earlycon: omapserial0 at MMIO 0x44e09000 (options '') [ 0.000000] bootconsole [omapserial0] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.0 (sgx neon) [ 0.000000] percpu: Embedded 16 pages/cpu s36748 r8192 d20596 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129540 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon deferred_probe_timeout=60 ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) <6>[ 0.000000] Memory: 417396K/522240K available (12288K kernel code, 1598K rwdata, 4688K rodata, 2048K init, 394K bss, 39308K reserved, 65536K cma-reserved, 0K highmem) <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) <5>[ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (13280 kB) <5>[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) <5>[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1599 kB) <5>[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 395 kB) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. <6>[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts <6>[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz <6>[ 0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns <6>[ 0.008240] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns <6>[ 0.017954] OMAP clocksource: timer1 at 24000000 Hz <2>[ 0.026763] timer_probe: no matching timers found <6>[ 0.032117] Console: colour dummy device 80x30 <6>[ 0.036914] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>[ 0.075863] CPU: Testing write buffer coherency: ok <6>[ 0.081140] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.086573] pid_max: default: 32768 minimum: 301 <6>[ 0.091728] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) <6>[ 0.098708] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) <6>[ 0.107223] CPU0: thread -1, cpu 0, socket -1, mpidr 0 <6>[ 0.113429] Setting up static identity map for 0x80300000 - 0x803000a0 <6>[ 0.121748] rcu: Hierarchical SRCU implementation. <6>[ 0.129501] EFI services will not be available. <6>[ 0.134527] smp: Bringing up secondary CPUs ... <6>[ 0.139382] smp: Brought up 1 node, 1 CPU <6>[ 0.143725] SMP: Total of 1 processors activated (996.14 BogoMIPS). <6>[ 0.150423] CPU: All CPU(s) started in SVC mode. <6>[ 0.156795] devtmpfs: initialized <6>[ 0.167134] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 <6>[ 0.175780] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.186129] futex hash table entries: 256 (order: 2, 16384 bytes) <6>[ 0.196507] pinctrl core: initialized pinctrl subsystem <6>[ 0.204071] DMI not present or invalid. <6>[ 0.208913] NET: Registered protocol family 16 <6>[ 0.216117] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.249521] l4_wkup_cm:clk:0010:0: failed to disable <6>[ 0.308692] cpuidle: using governor menu <6>[ 0.320075] OMAP GPIO hardware version 0.1 <6>[ 0.336212] No ATAGs? <6>[ 0.336223] hw-breakpoint: debug architecture 0x4 unsupported. <6>[ 0.350508] Serial: AMBA PL011 UART driver <6>[ 0.372775] edma 49000000.edma: TI EDMA DMA engine driver <6>[ 0.382209] vgaarb: loaded <5>[ 0.386006] SCSI subsystem initialized <6>[ 0.390833] usbcore: registered new interface driver usbfs <6>[ 0.396685] usbcore: registered new interface driver hub <6>[ 0.402448] usbcore: registered new device driver usb <6>[ 0.409407] pps_core: LinuxPPS API ver. 1 registered <6>[ 0.414694] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 0.424377] PTP clock support registered <6>[ 0.428806] EDAC MC: Ver: 3.0.0 <6>[ 0.435136] clocksource: Switched to clocksource timer1 <6>[ 0.501363] NET: Registered protocol family 2 <6>[ 0.506402] IP idents hash table entries: 8192 (order: 4, 65536 bytes) <6>[ 0.513910] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) <6>[ 0.522025] TCP established hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 0.529502] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) <6>[ 0.536381] TCP: Hash tables configured (established 4096 bind 4096) <6>[ 0.543202] UDP hash table entries: 256 (order: 1, 8192 bytes) <6>[ 0.549414] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) <6>[ 0.556216] NET: Registered protocol family 1 <6>[ 0.561645] RPC: Registered named UNIX socket transport module. <6>[ 0.567976] RPC: Registered udp transport module. <6>[ 0.572992] RPC: Registered tcp transport module. <6>[ 0.578098] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.585618] Trying to unpack rootfs image as initramfs... <6>[ 1.449264] Freeing initrd memory: 13000K <6>[ 1.454388] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available <5>[ 1.465482] Initialise system trusted keyrings <6>[ 1.470617] workingset: timestamp_bits=30 max_order=17 bucket_order=0 <6>[ 1.483779] squashfs: version 4.0 (2009/01/31) Phillip Lougher <5>[ 1.491067] NFS: Registering the id_resolver key type <5>[ 1.496552] Key type id_resolver registered <5>[ 1.501021] Key type id_legacy registered <6>[ 1.505464] ntfs: driver 2.1.32 [Flags: R/O]. <5>[ 1.512346] Key type asymmetric registered <5>[ 1.516822] Asymmetric key parser 'x509' registered <6>[ 1.522072] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) <6>[ 1.529881] io scheduler noop registered <6>[ 1.534138] io scheduler deadline registered <6>[ 1.538968] io scheduler cfq registered (default) <6>[ 1.543984] io scheduler mq-deadline registered <6>[ 1.548918] io scheduler kyber registered <6>[ 1.559231] pinctrl-single 44e10800.pinmux: 142 pins, size 568 <6>[ 1.629911] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 1.639964] SuperH (H)SCI(F) driver initialized <6>[ 1.645866] msm_serial: driver initialized <6>[ 1.650561] omap_uart 44e09000.serial: no wakeirq for uart0 <6>[ 1.656597] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a OMAP UART0 <6>[ 1.666348] console [ttyO0] enabled <6>[ 1.666348] console [ttyO0] enabled <6>[ 1.674029] bootconsole [omapserial0] disabled <6>[ 1.674029] bootconsole [omapserial0] disabled <6>[ 1.684398] STMicroelectronics ASC driver initialized <6>[ 1.691496] STM32 USART driver initialized <6>[ 1.697717] omap_rng 48310000.rng: Random Number Generator ver. 20 <5>[ 1.710438] random: crng init done <6>[ 1.723283] brd: module loaded <6>[ 1.732624] loop: module loaded <6>[ 1.745988] CAN device driver interface <6>[ 1.751264] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded <6>[ 1.758503] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k <6>[ 1.764888] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 1.771486] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k <6>[ 1.779079] igb: Copyright (c) 2007-2014 Intel Corporation. <6>[ 1.855157] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 <6>[ 1.863472] davinci_mdio 4a101000.mdio: detected phy mask fffffffe <6>[ 1.891860] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 <6>[ 1.904214] cpsw 4a100000.ethernet: Detected MACID = c8:a0:30:c2:c5:7d <6>[ 1.911693] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 <6>[ 1.918706] cpsw 4a100000.ethernet: ALE Table size 1024 <6>[ 1.926264] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver <6>[ 1.934379] usbcore: registered new interface driver pegasus <6>[ 1.940718] usbcore: registered new interface driver asix <6>[ 1.946720] usbcore: registered new interface driver ax88179_178a <6>[ 1.953406] usbcore: registered new interface driver cdc_ether <6>[ 1.959850] usbcore: registered new interface driver smsc75xx <6>[ 1.966202] usbcore: registered new interface driver smsc95xx <6>[ 1.972522] usbcore: registered new interface driver net1080 <6>[ 1.978838] usbcore: registered new interface driver cdc_subset <6>[ 1.985376] usbcore: registered new interface driver zaurus <6>[ 1.991536] usbcore: registered new interface driver cdc_ncm <6>[ 1.999911] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 2.007104] ehci-pci: EHCI PCI platform driver <6>[ 2.012081] ehci-platform: EHCI generic platform driver <6>[ 2.018086] ehci-orion: EHCI orion driver <6>[ 2.022727] SPEAr-ehci: EHCI SPEAr driver <6>[ 2.027390] ehci-st: EHCI STMicroelectronics driver <6>[ 2.032903] ehci-exynos: EHCI EXYNOS driver <6>[ 2.037735] ehci-atmel: EHCI Atmel driver <6>[ 2.042333] tegra-ehci: Tegra EHCI driver <6>[ 2.046993] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 2.053786] ohci-pci: OHCI PCI platform driver <6>[ 2.058774] ohci-platform: OHCI generic platform driver <6>[ 2.064723] SPEAr-ohci: OHCI SPEAr driver <6>[ 2.069396] ohci-st: OHCI STMicroelectronics driver <6>[ 2.074917] ohci-atmel: OHCI Atmel driver <6>[ 2.080153] usbcore: registered new interface driver usb-storage <6>[ 2.091646] i2c /dev entries driver <6>[ 2.108086] sdhci: Secure Digital Host Controller Interface driver <6>[ 2.114852] sdhci: Copyright(c) Pierre Ossman <6>[ 2.120999] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22) <6>[ 2.130467] omap_hsmmc 48060000.mmc: Got CD GPIO <6>[ 2.136058] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.1 <6>[ 2.169077] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.1 <6>[ 2.201847] Synopsys Designware Multimedia Card Interface Driver <6>[ 2.209934] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 2.219872] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 2.228256] usbcore: registered new interface driver usbhid <6>[ 2.234374] usbhid: USB HID core driver <6>[ 2.243414] NET: Registered protocol family 10 <6>[ 2.250161] Segment Routing with IPv6 <6>[ 2.254365] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 2.261624] NET: Registered protocol family 17 <6>[ 2.266627] can: controller area network core (rev 20170425 abi 9) <6>[ 2.273462] NET: Registered protocol family 29 <6>[ 2.278422] can: raw protocol (rev 20170425) <6>[ 2.283195] can: broadcast manager protocol (rev 20170425 t) <6>[ 2.289424] can: netlink gateway (rev 20170425) max_hops=1 <5>[ 2.296122] Key type dns_resolver registered <6>[ 2.301019] ThumbEE CPU extension supported. <5>[ 2.305850] Registering SWP/SWPB emulation handler <3>[ 2.311157] omap_voltage_late_init: Voltage driver support not added <5>[ 2.320207] Loading compiled-in X.509 certificates <4>[ 2.341517] mmc0: host does not support reading read-only switch, assuming write-enable <6>[ 2.352103] mmc0: new high speed SDHC card at address 0001 <6>[ 2.359198] mmcblk0: mmc0:0001 EB1QT 29.8 GiB <6>[ 2.366513] mmcblk0: p1 <6>[ 2.385767] tps65217 0-0024: TPS65217 ID 0xe version 1.2 <6>[ 2.392636] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write <6>[ 2.400636] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz <4>[ 2.408175] mmc1: unexpected status 0x2000980 after switch <4>[ 2.415697] mmc1: unexpected status 0x2000900 after switch <4>[ 2.421878] mmc1: unexpected status 0x2000900 after switch <4>[ 2.428268] mmc1: unexpected status 0x2000900 after switch <6>[ 2.434305] mmc1: new high speed MMC card at address 0001 <6>[ 2.441296] mmcblk1: mmc1:0001 MMC02G 1.79 GiB <6>[ 2.446925] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB <6>[ 2.453880] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB <6>[ 2.460801] mmcblk1rpmb: mmc1:0001 MMC02G partition 3 128 KiB, chardev (235:0) <6>[ 2.558463] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz <6>[ 2.565614] hctosys: unable to open rtc device (rtc0) <6>[ 2.585046] net eth0: initializing cpsw version 1.12 (0) <6>[ 2.686218] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) <6>[ 2.705349] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready <6>[ 4.756037] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off <6>[ 4.765184] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 4.795142] Sending DHCP requests . <4>[ 6.227117] mmc1: unexpected status 0x2000980 after switch <4>[ 6.238532] mmc1: unexpected status 0x2000900 after switch <4>[ 6.244653] mmc1: unexpected status 0x2000900 after switch <4>[ 6.251002] mmc1: unexpected status 0x2000900 after switch <3>[ 6.980341] print_req_error: I/O error, dev mmcblk1, sector 0 <3>[ 6.986674] Buffer I/O error on dev mmcblk1, logical block 0, async page read <4>[ 7.405113] ., OK <6>[ 7.467441] IP-Config: Got DHCP answer from 192.168.6.1, my address is 192.168.6.28 <6>[ 7.475761] IP-Config: Complete: <6>[ 7.479396] device=eth0, hwaddr=c8:a0:30:c2:c5:7d, ipaddr=192.168.6.28, mask=255.255.255.0, gw=192.168.6.1 <6>[ 7.490254] host=192.168.6.28, domain=, nis-domain=(none) <6>[ 7.496611] bootserver=192.168.6.1, rootserver=192.168.6.1, rootpath= <6>[ 7.496615] nameserver0=10.255.253.1 <6>[ 7.512915] Freeing unused kernel memory: 2048K <6>[ 7.525800] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 7.767997] udevd[85]: starting version 3.2.9 <27>[ 7.784118] udevd[85]: specified user 'tss' unknown <27>[ 7.790148] udevd[85]: specified group 'tss' unknown <30>[ 7.807139] udevd[86]: starting eudev-3.2.9 <4>[ 11.381949] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator <6>[ 11.392843] am335x-phy-driver 47401300.usb-phy: Linked as a consumer to regulator.0 <3>[ 11.491729] print_req_error: I/O error, dev mmcblk1, sector 0 <3>[ 11.498109] Buffer I/O error on dev mmcblk1, logical block 0, async page read <6>[ 11.506217] mmcblk1: unable to read partition table <4>[ 11.533423] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator <6>[ 11.544295] am335x-phy-driver 47401b00.usb-phy: Linked as a consumer to regulator.0 <6>[ 11.574192] musb-hdrc musb-hdrc.1: MUSB HDRC host driver <6>[ 11.580259] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 11.594444] hub 1-0:1.0: USB hub found <6>[ 11.630900] hub 1-0:1.0: 1 port detected <6>[ 14.145151] usb 1-1: new low-speed USB device number 2 using musb-hdrc <3>[ 14.295139] usb 1-1: device descriptor read/64, error -71 <3>[ 14.585133] usb 1-1: device descriptor read/64, error -71 <6>[ 14.855151] usb 1-1: new low-speed USB device number 3 using musb-hdrc <3>[ 15.005135] usb 1-1: device descriptor read/64, error -71 <3>[ 15.275137] usb 1-1: device descriptor read/64, error -71 <6>[ 15.395190] usb usb1-port1: attempt power cycle <6>[ 15.615133] usb 1-1: new low-speed USB device number 4 using musb-hdrc <3>[ 16.003812] print_req_error: I/O error, dev mmcblk1, sector 3751808 <6>[ 16.205129] usb 1-1: new low-speed USB device number 5 using musb-hdrc <3>[ 20.470977] print_req_error: I/O error, dev mmcblk1, sector 3751808 <3>[ 20.477868] Buffer I/O error on dev mmcblk1, logical block 468976, async page read <4>[ 20.491123] mmc1: unexpected status 0x2000900 after switch <4>[ 21.245142] mmc1: unexpected status 0x2000900 after switch <4>[ 21.998740] mmc1: unexpected status 0x2000900 after switch <4>[ 22.752352] mmc1: unexpected status 0x2000900 after switch <4>[ 23.481925] mmc1: unexpected status 0x2000900 after switch <4>[ 24.235554] mmc1: unexpected status 0x2000900 after switch <4>[ 24.989181] mmc1: unexpected status 0x2000900 after switch <4>[ 25.742786] mmc1: unexpected status 0x2000900 after switch <4>[ 26.472341] mmc1: unexpected status 0x2000900 after switch <4>[ 27.272876] mmc1: unexpected status 0x2000980 after switch <4>[ 27.279578] mmc1: unexpected status 0x2000900 after switch <4>[ 27.287077] mmc1: unexpected status 0x2000900 after switch <4>[ 27.293243] mmc1: unexpected status 0x2000900 after switch <4>[ 27.299677] mmc1: unexpected status 0x2000900 after switch <4>[ 27.305946] mmc1: unexpected status 0x2000900 after switch <4>[ 27.312210] mmc1: unexpected status 0x2000900 after switch <4>[ 28.112670] mmc1: unexpected status 0x2000980 after switch <4>[ 28.119414] mmc1: unexpected status 0x2000900 after switch <4>[ 28.126914] mmc1: unexpected status 0x2000900 after switch <4>[ 28.133081] mmc1: unexpected status 0x2000900 after switch <4>[ 28.139493] mmc1: unexpected status 0x2000900 after switch <4>[ 28.145764] mmc1: unexpected status 0x2000900 after switch <4>[ 28.152026] mmc1: unexpected status 0x2000900 after switch <3>[ 28.881359] print_req_error: I/O error, dev mmcblk1boot0, sector 0 <4>[ 28.888420] mmc1: unexpected status 0x2000900 after switch <3>[ 29.641800] print_req_error: I/O error, dev mmcblk1boot1, sector 0 <4>[ 29.648850] mmc1: unexpected status 0x2000900 after switch <4>[ 30.378385] mmc1: unexpected status 0x2000900 after switch <4>[ 31.107882] mmc1: unexpected status 0x2000900 after switch <4>[ 31.837411] mmc1: unexpected status 0x2000900 after switch <4>[ 32.590982] mmc1: unexpected status 0x2000900 after switch <4>[ 33.344583] mmc1: unexpected status 0x2000900 after switch <4>[ 34.098190] mmc1: unexpected status 0x2000900 after switch <4>[ 34.851866] mmc1: unexpected status 0x2000900 after switch <4>[ 35.605503] mmc1: unexpected status 0x2000900 after switch <4>[ 36.359084] mmc1: unexpected status 0x2000900 after switch <4>[ 37.112763] mmc1: unexpected status 0x2000900 after switch <3>[ 37.866251] print_req_error: I/O error, dev mmcblk1boot0, sector 0 <3>[ 37.873023] Buffer I/O error on dev mmcblk1boot0, logical block 0, async page read <4>[ 37.881712] mmc1: unexpected status 0x2000900 after switch <3>[ 38.635172] print_req_error: I/O error, dev mmcblk1boot1, sector 0 <3>[ 38.641941] Buffer I/O error on dev mmcblk1boot1, logical block 0, async page read <4>[ 38.650634] mmc1: unexpected status 0x2000900 after switch udevadm settle failed done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-703753/environment .<4>[ 39.404390] mmc1: unexpected status 0x2000900 after switch /lava-703753/environment / # /lava-703753/bin/lava-test-runner /lava-703753/0 /lava-703753/bin/lava-test-runner /lava-703753/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-703753/0/tests/0_dmesg + cat uuid + UUID=703753_1.5.2.4.1 + set +x <8>[ 39.617228] + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh kern :crit : timer_probe: no matching timers found <8>[ 39.673835] <8>[ 39.724340] <8>[ 39.775575] + set +x <8>[ 39.787255]