Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. ** HS Core starting application  U-Boot 2021.07-dirty (Aug 28 2021 - 15:33:04 +0200) CPU: ARC HS38 v2.1c at 500 MHz Model: snps,hsdk Board: Synopsys ARC HS Development Kit U-boot autostart: enabled DRAM: 1 GiB Relocation Offset is: 3ef98000 MMC: mmc0@f000a000: 0 Loading Environment from FAT... OK In: serial0@f0005000 Out: serial0@f0005000 Err: serial0@f0005000 Clock values are saved to environment Net: Warning: ethernet@f0008000 (eth0) using random MAC address - ea:58:d7:4b:b0:8d eth0: ethernet@f0008000 Hit any key to stop autoboot: 10  9  8  0 hsdk# setenv autoload no setenv autoload no hsdk# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff hsdk# setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff hsdk# dhcp dhcp Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 DHCP client bound to address 10.201.3.20 (2488 ms) hsdk# setenv serverip 10.201.1.3 setenv serverip 10.201.1.3 hsdk# tftp 0x82000000 2124763/tftp-deploy-ocgwaqsr/kernel/uImage tftp 0x82000000 2124763/tftp-deploy-ocgwaqsr/kernel/uImage Speed: 1000, full duplex Using ethernet@f0008000 device TFTP from server 10.201.1.3; our IP address is 10.201.3.20 Filename '2124763/tftp-deploy-ocgwaqsr/kernel/uImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############# 11.2 MiB/s done Bytes transferred = 3999028 (3d0534 hex) hsdk# tftp 0x83000000 2124763/tftp-deploy-ocgwaqsr/ramdisk/ramdisk.cpio.gz.uboot tftp 0x83000000 2124763/tftp-deploy-ocgwaqsr/ramdisk/ramdisk.cpio.gz.uboot Speed: 1000, full duplex Using ethernet@f0008000 device TFTP from server 10.201.1.3; our IP address is 10.201.3.20 Filename '2124763/tftp-deploy-ocgwaqsr/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x83000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################################### 11.2 MiB/s done Bytes transferred = 7531606 (72ec56 hex) hsdk# setenv initrd_size ${filesize} setenv initrd_size ${filesize} hsdk# tftp 0x81000000 2124763/tftp-deploy-ocgwaqsr/dtb/hsdk.dtb tftp 0x81000000 2124763/tftp-deploy-ocgwaqsr/dtb/hsdk.dtb Speed: 1000, full duplex Using ethernet@f0008000 device TFTP from server 10.201.1.3; our IP address is 10.201.3.20 Filename '2124763/tftp-deploy-ocgwaqsr/dtb/hsdk.dtb'. Load address: 0x81000000 Loading: *# 2.7 MiB/s done Bytes transferred = 5700 (1644 hex) hsdk# setenv bootargs 'console=ttyS0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttyS0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' hsdk# bootm 0x82000000 0x83000000 0x81000000 bootm 0x82000000 0x83000000 0x81000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux-5.10.124-cip9 Image Type: ARC Linux Kernel Image (gzip compressed) Data Size: 3998964 Bytes = 3.8 MiB Load Address: 90000000 Entry Point: 90004000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 83000000 ... Image Name: Image Type: ARC Linux RAMDisk Image (uncompressed) Data Size: 7531542 Bytes = 7.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81000000 Booting using the fdt blob at 0x81000000 Uncompressing Kernel Image Using Device Tree in place at 81000000, end 81004643 CPU start mask is 0xf Starting kernel ... <5>Linux version 5.10.124-cip9 (KernelCI@build-j257872-arc-gcc-10-hsdk-defconfig-f5mr4) (arc-elf32-gcc (ARCompact/ARCv2 ISA elf32 toolchain - build 581) 10.2.0, GNU ld (ARCompact/ARCv2 ISA elf32 toolchain - build 581) 2.36.1) #1 SMP PREEMPT Fri Jun 24 15:32:32 UTC 2022 <6>Memory @ 80000000 [1024M] <6>OF: fdt: Machine model: snps,hsdk <4>Malformed early option 'earlycon' <4>Failed to get possible-cpus from dtb, pretending all 4 cpus exist <6>archs-intc : 2 priority levels (default 1) FIRQ (not used) <6> <6>IDENTITY : ARCVER [0x52] ARCNUM [0x0] CHIPID [ 0x0] <6>processor [0] : HS38 R2.1 (ARCv2 ISA) <6>Timers : Timer0 Timer1 RTC [UP 64-bit] GFRC [SMP 64-bit] <6>ISA Extn : atomic ll64 unalign mpy[opt 9] div_rem <6>BPU : full match, cache:2048, Predict Table:16384 Return stk: 8 <6>MMU [v4] : 8k PAGE, 2M Super Page (not used) JTLB 1024 (256x4), uDTLB 8, uITLB 4, PAE40 (not used) <6>I-Cache : 64K, 4way/set, 64B Line, VIPT aliasing <6>D-Cache : 64K, 2way/set, 64B Line, PIPT <6>SLC : 512K, 128B Line <6>Peripherals : 0xf0000000, IO-Coherency (per-device) <6>Vector Table : 0x90000000 <6>FPU : SP DP <6>DEBUG : smaRT RTT ActionPoint 8/min <6>Extn [SMP] : ARConnect (v2): 4 cores with IPI IDU DEBUG GFRC <6>Zone ranges: <6> Normal [mem 0x0000000080000000-0x00000000bfffffff] <6>Movable zone start for each node <6>Early memory node ranges <6> node 0: [mem 0x0000000080000000-0x00000000bfffffff] <6>Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff] <6>percpu: Embedded 7 pages/cpu s23296 r8192 d25856 u57344 <6>Built 1 zonelists, mobility grouping on. Total pages: 130496 <5>Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>Dentry cache hash table entries: 131072 (order: 6, 524288 bytes, linear) <6>Inode-cache hash table entries: 65536 (order: 5, 262144 bytes, linear) <6>mem auto-init: stack:off, heap alloc:off, heap free:off <6>Memory: 1027816K/1048576K available (5361K kernel code, 638K rwdata, 1320K rodata, 160K init, 299K bss, 20760K reserved, 0K cma-reserved) <6>rcu: Preemptible hierarchical RCU implementation. <6>rcu: RCU event tracing is enabled. <6> Trampoline variant of Tasks RCU enabled. <6>rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>NR_IRQS: 512 <6>MCIP: IDU supports 64 common irqs <6>sched_clock: 64 bits at 999MHz, resolution 1ns, wraps every 4398046511103ns <6>clocksource: ARConnect GFRC: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns <6>Console: colour dummy device 80x25 <6>Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) <6>pid_max: default: 32768 minimum: 301 <6>Mount-cache hash table entries: 2048 (order: 0, 8192 bytes, linear) <6>Mountpoint-cache hash table entries: 2048 (order: 0, 8192 bytes, linear) <6>rcu: Hierarchical SRCU implementation. <6>smp: Bringing up secondary CPUs ... <6>Idle Task [1] (ptrval) <6>Trying to bring up CPU1 ... <6>archs-intc : 2 priority levels (default 1) FIRQ (not used) <6> <6>IDENTITY : ARCVER [0x52] ARCNUM [0x1] CHIPID [ 0x0] <6>processor [1] : HS38 R2.1 (ARCv2 ISA) <6>Timers : Timer0 Timer1 RTC [UP 64-bit] <6>ISA Extn : atomic ll64 unalign mpy[opt 9] div_rem <6>BPU : full match, cache:2048, Predict Table:16384 Return stk: 8 <6>MMU [v4] : 8k PAGE, 2M Super Page (not used) JTLB 1024 (256x4), uDTLB 8, uITLB 4, PAE40 (not used) <6>I-Cache : 64K, 4way/set, 64B Line, VIPT aliasing <6>D-Cache : 64K, 2way/set, 64B Line, PIPT <6>SLC : 512K, 128B Line <6>Peripherals : 0xf0000000, IO-Coherency (per-device) <6>Vector Table : 0x90000000 <6>FPU : SP DP <6>DEBUG : smaRT RTT ActionPoint 8/min <6>Extn [CCM] : DCCM @ 60000000, 256 KB / ICCM: @ 60000000, 256 KB <6>Extn [SMP] : ARConnect (v2): 4 cores with IPI IDU DEBUG GFRC <6>## CPU1 LIVE ##: Executing Code... <6>Idle Task [2] (ptrval) <6>Trying to bring up CPU2 ... <6>archs-intc : 2 priority levels (default 1) FIRQ (not used) <6> <6>IDENTITY : ARCVER [0x52] ARCNUM [0x2] CHIPID [ 0x0] <6>processor [2] : HS38 R2.1 (ARCv2 ISA) <6>Timers : Timer0 Timer1 RTC [UP 64-bit] <6>ISA Extn : atomic ll64 unalign mpy[opt 9] div_rem <6>BPU : full match, cache:2048, Predict Table:16384 Return stk: 8 <6>MMU [v4] : 8k PAGE, 2M Super Page (not used) JTLB 1024 (256x4), uDTLB 8, uITLB 4, PAE40 (not used) <6>I-Cache : 64K, 4way/set, 64B Line, VIPT aliasing <6>D-Cache : 64K, 2way/set, 64B Line, PIPT <6>SLC : 512K, 128B Line <6>Peripherals : 0xf0000000, IO-Coherency (per-device) <6>Vector Table : 0x90000000 <6>FPU : SP DP <6>DEBUG : smaRT RTT ActionPoint 8/min <6>Extn [SMP] : ARConnect (v2): 4 cores with IPI IDU DEBUG GFRC <6>## CPU2 LIVE ##: Executing Code... <6>Idle Task [3] (ptrval) <6>Trying to bring up CPU3 ... <6>archs-intc : 2 priority levels (default 1) FIRQ (not used) <6> <6>IDENTITY : ARCVER [0x52] ARCNUM [0x3] CHIPID [ 0x0] <6>processor [3] : HS38 R2.1 (ARCv2 ISA) <6>Timers : Timer0 Timer1 RTC [UP 64-bit] <6>ISA Extn : atomic ll64 unalign mpy[opt 9] div_rem <6>BPU : full match, cache:2048, Predict Table:16384 Return stk: 8 <6>MMU [v4] : 8k PAGE, 2M Super Page (not used) JTLB 1024 (256x4), uDTLB 8, uITLB 4, PAE40 (not used) <6>I-Cache : 64K, 4way/set, 64B Line, VIPT aliasing <6>D-Cache : 64K, 2way/set, 64B Line, PIPT <6>SLC : 512K, 128B Line <6>Peripherals : 0xf0000000, IO-Coherency (per-device) <6>Vector Table : 0x90000000 <6>FPU : SP DP <6>DEBUG : smaRT RTT ActionPoint 8/min <6>Extn [CCM] : DCCM @ 60000000, 256 KB / ICCM: @ 60000000, 256 KB <6>Extn [SMP] : ARConnect (v2): 4 cores with IPI IDU DEBUG GFRC <6>## CPU3 LIVE ##: Executing Code... <6>smp: Brought up 1 node, 4 CPUs <6>devtmpfs: initialized <6>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>futex hash table entries: 1024 (order: 4, 131072 bytes, linear) <6>NET: Registered protocol family 16 <6>DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations <6>thermal_sys: Registered thermal governor 'step_wise' <6>reg-fixed-voltage regulator-5v0: use noncoherent DMA ops <5>SCSI subsystem initialized <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb <6>pps_core: LinuxPPS API ver. 1 registered <6>pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>PTP clock support registered <6>clocksource: Switched to clocksource ARConnect GFRC <6>NET: Registered protocol family 2 <6>IP idents hash table entries: 16384 (order: 4, 131072 bytes, linear) <6>tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 12288 bytes, linear) <6>TCP established hash table entries: 8192 (order: 2, 32768 bytes, linear) <6>TCP bind hash table entries: 8192 (order: 3, 65536 bytes, linear) <6>TCP: Hash tables configured (established 8192 bind 8192) <6>UDP hash table entries: 512 (order: 1, 16384 bytes, linear) <6>UDP-Lite hash table entries: 512 (order: 1, 16384 bytes, linear) <6>NET: Registered protocol family 1 <6>RPC: Registered named UNIX socket transport module. <6>RPC: Registered udp transport module. <6>RPC: Registered tcp transport module. <6>RPC: Registered tcp NFSv4.1 backchannel transport module. <6>Trying to unpack rootfs image as initramfs... <6>Freeing initrd memory: 7344K <6>arc-pct pct: use noncoherent DMA ops <6>ARC perf : 8 counters (48 bits), 113 conditions <6>workingset: timestamp_bits=30 max_order=17 bucket_order=0 <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) <6>io scheduler mq-deadline registered <6>io scheduler kyber registered <6>snps-creg-gpio f00014b0.gpio: use noncoherent DMA ops <6>snps-creg-gpio f00014b0.gpio: GPIO controller with 2 gpios probed <6>gpio-dwapb f0003000.gpio: use noncoherent DMA ops <4>gpio-dwapb f0003000.gpio: no IRQ for port0 <6>dw_axi_dmac_platform f0080000.dmac: use noncoherent DMA ops <6>dw_axi_dmac_platform f0080000.dmac: DesignWare AXI DMA Controller, 4 channels <6>hsdk-reset f00008a0.reset-controller: use noncoherent DMA ops <6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>dw-apb-uart f0005000.serial: use noncoherent DMA ops <6>printk: console [ttyS0] disabled <6>f0005000.serial: ttyS0 at MMIO 0xf0005000 (irq = 6, base_baud = 2083125) is a 16550A <6>printk: console [ttyS0] enabled <6>usbcore: registered new interface driver udl <6>etnaviv-gpu f0090000.gpu: use noncoherent DMA ops <6> (null): use noncoherent DMA ops <6>etnaviv etnaviv: bound f0090000.gpu (ops 0x905934c4) <6>etnaviv-gpu f0090000.gpu: model: GC880, revision: 5124 <6>[drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0 <6>brd: module loaded <6>dw_spi_mmio f0020000.spi: use noncoherent DMA ops <6>spi-nor spi0.0: sst26wf016b (2048 Kbytes) <6>stmmaceth f0008000.ethernet: use coherent DMA ops <6>stmmaceth f0008000.ethernet: IRQ eth_wake_irq not found <6>stmmaceth f0008000.ethernet: IRQ eth_lpi not found <6>stmmaceth f0008000.ethernet: PTP uses main clock <6>stmmaceth f0008000.ethernet: User ID: 0x10, Synopsys ID: 0x37 <6>stmmaceth f0008000.ethernet: DWMAC1000 <6>stmmaceth f0008000.ethernet: DMA HW capability register supported <6>stmmaceth f0008000.ethernet: RX Checksum Offload Engine supported <6>stmmaceth f0008000.ethernet: COE Type 2 <6>stmmaceth f0008000.ethernet: TX Checksum insertion supported <6>stmmaceth f0008000.ethernet: Normal descriptors <6>stmmaceth f0008000.ethernet: Ring mode enabled <6>stmmaceth f0008000.ethernet: Enable RX Mitigation via HW Watchdog Timer <6>stmmaceth f0008000.ethernet: device MAC address 5a:4d:9f:a9:8b:12 <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>ehci-platform: EHCI generic platform driver <6>ehci-platform f0040000.ehci: use coherent DMA ops <6>ehci-platform f0040000.ehci: EHCI Host Controller <6>ehci-platform f0040000.ehci: new USB bus registered, assigned bus number 1 <6>ehci-platform f0040000.ehci: irq 15, io mem 0xf0040000 <6>ehci-platform f0040000.ehci: USB 2.0 started, EHCI 1.00 <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 1 port detected <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>ohci-platform: OHCI generic platform driver <6>ohci-platform f0060000.ohci: use coherent DMA ops <6>ohci-platform f0060000.ohci: Generic Platform OHCI controller <6>ohci-platform f0060000.ohci: new USB bus registered, assigned bus number 2 <6>ohci-platform f0060000.ohci: irq 15, io mem 0xf0060000 <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 1 port detected <6>usbcore: registered new interface driver usb-storage <6>sdhci: Secure Digital Host Controller Interface driver <6>sdhci: Copyright(c) Pierre Ossman <6>Synopsys Designware Multimedia Card Interface Driver <6>dw_mmc f000a000.mmc: use coherent DMA ops <6>sdhci-pltfm: SDHCI platform and OF driver helper <6>dw_mmc f000a000.mmc: IDMAC supports 32-bit address mode. <6>usbcore: registered new interface driver usbhid <6>dw_mmc f000a000.mmc: Using internal DMA controller. <6>usbhid: USB HID core driver <6>dw_mmc f000a000.mmc: Version ID is 290a <6>NET: Registered protocol family 10 <6>dw_mmc f000a000.mmc: DW MMC controller at irq 12,32 bit host data width,16 deep fifo <6>Segment Routing with IPv6 <6>sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>NET: Registered protocol family 17 <4>dw-apb-uart f0005000.serial: forbid DMA for kernel console <6>mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) <6>Freeing unused kernel memory: 160K <4>This architecture does not have kernel memory protection. <6>Run /init as init process <6>mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 25000000Hz, actual 25000000HZ div = 1) <6>mmc0: new SDHC card at address 0001 <6>blk_queue_max_segment_size: set to minimum 8192 <6>mmcblk0: mmc0:0001 ASTC 7.45 GiB Starting syslogd: <6> mmcblk0: p1 p2 OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <6>usb 1-1: new high-speed USB device number 2 using ehci-platform <30>udevd[102]: starting version 3.2.9 <5>random: udevd: uninitialized urandom read (16 bytes read) <5>random: udevd: uninitialized urandom read (16 bytes read) <5>random: udevd: uninitialized urandom read (16 bytes read) <27>udevd[102]: specified user 'tss' unknown <27>udevd[102]: specified group 'tss' unknown <30>udevd[103]: starting eudev-3.2.9 <6>hub 1-1:1.0: USB hub found <6>hub 1-1:1.0: 2 ports detected done Saving random seed: OK Starting network: OK mount: mounting none on /sys/kernel/debug failed: No such file or directory Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-2124763/environment . /lava-2124763/environment / # /lava-2124763/bin/lava-test-runner /lava-2124763/0 /lava-2124763/bin/lava-test-runner /lava-2124763/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-2124763/0/tests/0_dmesg<8> + cat uuid + UUID=2124763_1.5.2.4.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8> <8> <8> + set +x <8> # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-2124763/environment . /lava-2124763/environment / # /lava-2124763/bin/lava-test-runner /lava-2124763/1 /lava-2124763/bin/lava-test-runner /lava-2124763/1 / # + export 'TESTRUN_ID=1_bootrr' + cd /lava-2124763/1/tests/1_bootr<8> r + cat uuid + UUID=2124763_1.5.2.4.5 + set +x + export 'PATH=/opt/bootrr/helpers:/lava-2124763/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-2<8> 124763/1/../bin/lava-test-case /lava-2124763/1/../bin/lava-test-case <8> /lava-2124763/1/../bin/lava-test-case <8> + set +x <8>