connecting to NetworkSerialPort(target=Target(name='imx27-phytec-phycard-s-rdk-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4002, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4002 connected to 10.8.254.5 (port 4002) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2019.05.0 #1 Tue May 28 08:36:25 CEST 2019 Board: Phytec pca100 rapid development kit detected i.MX27 revision 2.1 mdio_bus: miibus0: probed nand: ONFI flash detected nand: NAND device: Manufacturer ID: 0x20, Chip ID: 0xa1 (ST Micro NAND01GR3B2CZA6), 128MiB, page size: 2048, OOB size: 64 Bad block table found at page 65472, version 0x01 Bad block table found at page 65408, version 0x01 imx-mmc 10014000.sdhci@10014000.of: registered as mci0 netconsole: registered as netconsole-1 Found NXP ISP150x ULPI transceiver (0x04cc:0x1504). ehci ehci0: USB EHCI 1.00 Found NXP ISP150x ULPI transceiver (0x04cc:0x1504). ehci ehci1: USB EHCI 1.00 malloc space: 0xa3efe4c0 -> 0xa7dfc97f (size 63 MiB) envfs: no envfs (magic mismatch) - envfs never written? running /env/bin/init... [?25h Hit m for menu or any key to stop autoboot: 3 type exit to get to the menu [1;32mbarebox@[1;36mPhytec phyCARD-i.MX27:/[0m bootm -v -r /mnt/tftp/754448/tftp-deploy-vikcr7wi/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/754448/tftp-deploy-vikcr7wi/dtb/imx27-phytec-phycard-s-rdk.dtb /mnt/tftp/754448/tftp-deploy-vikcr7wi/kernel/zImage [1;32mbarebox@[1;36mPhytec phyCARD-i.MX27:/[0m bootm -v -r /mnt/tftp/754448/tftp-deploy-vikcr7wi/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/754448/tftp-deploy-vikcr7wi/dtb/imx27-phytec-phycard-s-rdk.dtb /mnt/tftp/754448/tftp-deploy-vikcr7wi/kernel/zImage [33mWARNING:[0m eth0: No MAC address set. Using random address 62:de:2b:80:2a:cf eth0: 100Mbps full duplex link detected eth0: DHCP client bound to address 10.8.254.223 Loading ARM Linux zImage '/mnt/tftp/754448/tftp-deploy-vikcr7wi/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0xa173c000 no initrd load address, defaulting to 0xa1ce2000 Loaded initrd GZIP compressed '/mnt/tftp/754448/tftp-deploy-vikcr7wi/ramdisk/ramdisk.cpio.gz' initrd is at 0xa1ce2000-0xa24a46fb Loading devicetree from '/mnt/tftp/754448/tftp-deploy-vikcr7wi/dtb/imx27-phytec-phycard-s-rdk.dtb' commandline: console=ttymxc0,115200n8 Starting kernel at 0xa173c000, initrd at 0xa1ce2000, oftree at 0xa24a5000... Booting Linux on physical CPU 0x0 Linux version 5.10.124-cip9 (KernelCI@build-j257839-arm-gcc-10-imx-v4-v5-defconfig-bhhbk) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 PREEMPT Fri Jun 24 15:31:36 UTC 2022 CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=0005317f CPU: VIVT data cache, VIVT instruction cache OF: fdt: Machine model: Phytec pca100 rapid development kit Memory policy: Data cache writeback Zone ranges: Normal [mem 0x00000000a0000000-0x00000000a7ffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00000000a0000000-0x00000000a7ffffff] Initmem setup node 0 [mem 0x00000000a0000000-0x00000000a7ffffff] Built 1 zonelists, mobility grouping on. Total pages: 32512 Kernel command line: console=ttymxc0,115200n8 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) mem auto-init: stack:off, heap alloc:off, heap free:off Memory: 111436K/131072K available (7589K kernel code, 617K rwdata, 1624K rodata, 248K init, 152K bss, 19636K reserved, 0K cma-reserved) rcu: Preemptible hierarchical RCU implementation. rcu: RCU event tracing is enabled. Trampoline variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 MXC IRQ initialized CPU identified as i.MX27, silicon rev 2.1 Switching to timer-based delay loop, resolution 15ns sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32292987384ns clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28740758601 ns Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 133.00 BogoMIPS (lpj=665000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) CPU: Testing write buffer coherency: ok Setting up static identity map for 0xa0008400 - 0xa000847c rcu: Hierarchical SRCU implementation. devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: -1, 3072 bytes, linear) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations imx27-pinctrl 10015000.iomuxc: initialized IMX pinctrl driver Kprobes globally optimized SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb mc: Linux media interface: v0.10 videodev: Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource mxc_timer1 NET: Registered protocol family 2 IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) TCP: Hash tables configured (established 1024 bind 1024) UDP hash table entries: 256 (order: 0, 4096 bytes, linear) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Unpacking initramfs... Freeing initrd memory: 7948K workingset: timestamp_bits=30 max_order=15 bucket_order=0 jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. io scheduler mq-deadline registered io scheduler kyber registered imx-fb 10021000.fb: i.MX Framebuffer driver Console: switching to colour frame buffer device 80x60 imx-fb 10021000.fb: supply lcd not found, using dummy regulator 1000a000.serial: ttymxc0 at MMIO 0x1000a000 (irq = 36, base_baud = 4156250) is a IMX printk: console [ttymxc0] enabled 1000b000.serial: ttymxc1 at MMIO 0x1000b000 (irq = 35, base_baud = 4156250) is a IMX 1000c000.serial: ttymxc2 at MMIO 0x1000c000 (irq = 34, base_baud = 4156250) is a IMX nand: device found, Manufacturer ID: 0x20, Chip ID: 0xa1 nand: ST Micro NAND01GR3B2CZA6 nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Bad block table found at page 65472, version 0x01 Bad block table found at page 65408, version 0x01 nand_read_bbt: bad block at 0x000002920000 nand_read_bbt: bad block at 0x000002940000 nand_read_bbt: bad block at 0x000002960000 nand_read_bbt: bad block at 0x000002980000 nand_read_bbt: bad block at 0x0000029a0000 nand_read_bbt: bad block at 0x0000029c0000 nand_read_bbt: bad block at 0x0000029e0000 nand_read_bbt: bad block at 0x000002a00000 nand_read_bbt: bad block at 0x000002a20000 nand_read_bbt: bad block at 0x000002a40000 nand_read_bbt: bad block at 0x000002a60000 nand_read_bbt: bad block at 0x000002a80000 nand_read_bbt: bad block at 0x000002aa0000 nand_read_bbt: bad block at 0x000002ac0000 nand_read_bbt: bad block at 0x000002ae0000 nand_read_bbt: bad block at 0x000002b00000 nand_read_bbt: bad block at 0x000002b20000 4 fixed-partitions partitions found on MTD device mxc_nand Creating 4 MTD partitions on \"mxc_nand\": 0x000000000000-0x0000000e0000 : \"boot\" 0x0000000e0000-0x000000100000 : \"environment\" 0x000000100000-0x000000500000 : \"kernel\" 0x000000500000-0x000008000000 : \"root\" ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-mxc: Freescale On-Chip EHCI Host driver usbcore: registered new interface driver usb-storage mxc_rtc 10007000.rtc: registered as rtc0 mxc_rtc 10007000.rtc: setting system clock to 1970-01-01T00:00:11 UTC (11) coda 10023000.coda: IRQ bit not found coda 10023000.coda: Direct firmware load for vpu_fw_imx27_TO2.bin failed with error -2 Driver for 1-wire Dallas network protocol. coda 10023000.coda: Direct firmware load for vpu/vpu_fw_imx27_TO2.bin failed with error -2 coda 10023000.coda: Direct firmware load for v4l-codadx6-imx27.bin failed with error -2 i.MX/MPC512x SDHC driver sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman coda 10023000.coda: firmware request failed mxc-mmc 10014000.mmc: Got CD GPIO sdhci-pltfm: SDHCI platform and OF driver helper NET: Registered protocol family 17 oprofile: no performance counters oprofile: using timer interrupt. ALSA device list: No soundcards found. Freeing unused kernel memory: 248K Kernel memory protection not selected by kernel config. Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: udevd[77]: starting version 3.2.9 random: udevd: uninitialized urandom read (16 bytes read) random: udevd: uninitialized urandom read (16 bytes read) random: udevd: uninitialized urandom read (16 bytes read) udevd[77]: specified user 'tss' unknown udevd[77]: specified group 'tss' unknown udevd[78]: starting eudev-3.2.9 done Saving random seed: random: dd: uninitialized urandom read (32 bytes read) OK Starting network: OK mount: mounting none on /sys/kernel/debug failed: No such file or directory Starting dropbear sshd: random: dropbear: uninitialized urandom read (32 bytes read) OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-754448/environment . /lava-754448/environment / # /lava-754448/bin/lava-test-runner /lava-754448/0 /lava-754448/bin/lava-test-runner /lava-754448/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-754448/0/tests/0_dmesg + cat uuid + UUID=754448_1.5.2.3.1 + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh + set +x / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-754448/environment / # . /lava-754448/environment/lava-754448/bin/lava-test-runner /lava-754448/1 / # /lava-754448/bin/lava-test-runner /lava-754448/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-754448/1/tests/1_bootrr + cat uuid + UUID=754448_1.5.2.3.5 + set +x + export 'PATH=/opt/bootrr/helpers:/lava-754448/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-754448/1/../bin/lava-test-case /lava-754448/1/../bin/lava-test-case /lava-754448/1/../bin/lava-test-case + set +x / #