Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. U-Boot SPL 2018.03-mx6+g9879e5c (Jun 27 2019 - 15:24:32 +0000) Part number: VSM-DT6-302 Assembly: AS170013251 Date of production: 2017Aug20 Trying to boot from MMC1 MMC Boot Device: mmc0 (SD) U-Boot 2018.03-mx6+g9879e5c (Jun 27 2019 - 15:24:32 +0000) CPU: Freescale i.MX6Q rev1.3 at 792MHz CPU: Extended Commercial temperature grade (-20C to 105C) at 33C Reset cause: POR Board: Variscite DART-MX6 I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK auto-detected panel VAR-WVGA Display: VAR-WVGA (800x480) In: serial Out: serial Err: serial switch to partitions #0, OK mmc0 is current device eMMC: 7.3 GiB Net: using phy at 7 got MAC0 address from fuse: f8:dc:7a:10:9b:1e FEC [PRIME] Normal Boot Hit any key to stop autoboot: 10  0 => setenv autoload no setenv autoload no => setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff => setenv fdt_high 0xffffffff setenv fdt_high 0xffffffff => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 10.201.4.154 (261 ms) => setenv serverip 10.201.1.11 setenv serverip 10.201.1.11 => tftp 0x12000000 2318484/tftp-deploy-ffjiueh8/kernel/zImage tftp 0x12000000 2318484/tftp-deploy-ffjiueh8/kernel/zImage Using FEC device TFTP from server 10.201.1.11; our IP address is 10.201.4.154 Filename '2318484/tftp-deploy-ffjiueh8/kernel/zImage'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ## 3.2 MiB/s done Bytes transferred = 10517016 (a07a18 hex) => tftp 0x18100000 2318484/tftp-deploy-ffjiueh8/ramdisk/ramdisk.cpio.gz.uboot tftp 0x18100000 2318484/tftp-deploy-ffjiueh8/ramdisk/ramdisk.cpio.gz.uboot Using FEC device TFTP from server 10.201.1.11; our IP address is 10.201.4.154 Filename '2318484/tftp-deploy-ffjiueh8/ramdisk/ramdisk.cpio.gz.uboot'. Load address: 0x18100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################### 3.2 MiB/s done Bytes transferred = 10161785 (9b0e79 hex) => setenv initrd_size ${filesize} setenv initrd_size ${filesize} => tftp 0x18000000 2318484/tftp-deploy-ffjiueh8/dtb/imx6q-var-dt6customboard.dtb tftp 0x18000000 2318484/tftp-deploy-ffjiueh8/dtb/imx6q-var-dt6customboard.dtb Using FEC device TFTP from server 10.201.1.11; our IP address is 10.201.4.154 Filename '2318484/tftp-deploy-ffjiueh8/dtb/imx6q-var-dt6customboard.dtb'. Load address: 0x18000000 Loading: *### 2.8 MiB/s done Bytes transferred = 41057 (a061 hex) => setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' setenv bootargs 'console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp' => bootz 0x12000000 0x18100000 0x18000000 bootz 0x12000000 0x18100000 0x18000000 ## Loading init Ramdisk from Legacy Image at 18100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 10161721 Bytes = 9.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800d060 switch to ldo_bypass mode! Starting kernel ... <6>[ 0.000000] Booting Linux on physical CPU 0x0 <5>[ 0.000000] Linux version 5.10.135-cip13 (KernelCI@build-j447718-arm-gcc-10-imx-v6-v7-defconfig-qszmn) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Wed Aug 3 14:36:25 UTC 2022 <6>[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d <6>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache <6>[ 0.000000] OF: fdt: Machine model: Variscite DART-MX6 Carrier-board <4>[ 0.000000] Malformed early option 'earlycon' <6>[ 0.000000] Memory policy: Data cache writealloc <6>[ 0.000000] cma: Reserved 64 MiB at 0x4c000000 <6>[ 0.000000] Zone ranges: <6>[ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] <6>[ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] <6>[ 0.000000] Movable zone start for each node <6>[ 0.000000] Early memory node ranges <6>[ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff] <6>[ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff] <6>[ 0.000000] percpu: Embedded 20 pages/cpu s51884 r8192 d21844 u81920 <6>[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 <5>[ 0.000000] Kernel command line: console=ttymxc0,115200n8 root=/dev/ram0 console_msg_format=syslog earlycon ip=dhcp <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.000000] Memory: 933428K/1048576K available (14336K kernel code, 2022K rwdata, 4840K rodata, 1024K init, 6661K bss, 49612K reserved, 65536K cma-reserved, 196608K highmem) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] Running RCU self tests <6>[ 0.000000] rcu: Hierarchical RCU implementation. <6>[ 0.000000] rcu: RCU event tracing is enabled. <6>[ 0.000000] rcu: RCU lockdep checking is enabled. <6>[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. <6>[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 <6>[ 0.000000] L2C-310 errata 752271 769419 enabled <6>[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 <6>[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 <6>[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines <6>[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled <6>[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB <6>[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 <4>[ 0.000000] ccm: ldb_di0_sel already changed from reset value: 1 <4>[ 0.000000] ccm: ldb_di1_sel already changed from reset value: 1 <6>[ 0.000000] Switching to timer-based delay loop, resolution 333ns <6>[ 0.000010] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns <6>[ 0.000043] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns <6>[ 0.001764] Console: colour dummy device 80x30 <4>[ 0.001817] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.001841] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.001863] ... MAX_LOCK_DEPTH: 48 <4>[ 0.001885] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 0.001907] ... CLASSHASH_SIZE: 4096 <4>[ 0.001928] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.001949] ... MAX_LOCKDEP_CHAINS: 65536 <4>[ 0.001971] ... CHAINHASH_SIZE: 32768 <4>[ 0.001993] memory used by lock dependency info: 4061 kB <4>[ 0.002015] memory used for stack traces: 2112 kB <4>[ 0.002036] per task-struct memory footprint: 1536 bytes <6>[ 0.002157] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) <6>[ 0.002201] pid_max: default: 32768 minimum: 301 <6>[ 0.002602] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.002649] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) <6>[ 0.006229] CPU: Testing write buffer coherency: ok <6>[ 0.006366] CPU0: Spectre v2: using BPIALL workaround <6>[ 0.007459] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.010741] Setting up static identity map for 0x10100000 - 0x10100078 <6>[ 0.011498] rcu: Hierarchical SRCU implementation. <6>[ 0.014107] smp: Bringing up secondary CPUs ... <6>[ 0.017503] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.017519] CPU1: Spectre v2: using BPIALL workaround <6>[ 0.021827] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 <6>[ 0.021842] CPU2: Spectre v2: using BPIALL workaround <6>[ 0.025183] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 <6>[ 0.025196] CPU3: Spectre v2: using BPIALL workaround <6>[ 0.025949] smp: Brought up 1 node, 4 CPUs <6>[ 0.025987] SMP: Total of 4 processors activated (24.00 BogoMIPS). <6>[ 0.026017] CPU: All CPU(s) started in SVC mode. <6>[ 0.028853] devtmpfs: initialized <6>[ 0.075023] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 0.077991] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns <6>[ 0.078081] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) <6>[ 0.082629] pinctrl core: initialized pinctrl subsystem <6>[ 0.089447] NET: Registered protocol family 16 <6>[ 0.120224] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.126257] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.126882] cpuidle: using governor menu <6>[ 0.127082] CPU identified as i.MX6Q, silicon rev 1.5 <6>[ 0.626473] vdd1p1: supplied by regulator-dummy <6>[ 0.650924] vdd3p0: supplied by regulator-dummy <6>[ 0.674395] vdd2p5: supplied by regulator-dummy <3>[ 0.697847] vddarm: bypassed regulator has no supply! <3>[ 0.697903] vddarm: failed to get the current voltage: -EPROBE_DEFER <3>[ 0.743873] vddsoc: bypassed regulator has no supply! <3>[ 0.743912] vddsoc: failed to get the current voltage: -EPROBE_DEFER <6>[ 1.754106] No ATAGs? <6>[ 1.754683] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 1.754791] hw-breakpoint: maximum watchpoint size is 4 bytes. <6>[ 1.761008] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver <6>[ 1.890982] mxs-dma 110000.dma-apbh: initialized <6>[ 1.901910] vgaarb: loaded <5>[ 1.904493] SCSI subsystem initialized <6>[ 1.906450] usbcore: registered new interface driver usbfs <6>[ 1.906740] usbcore: registered new interface driver hub <6>[ 1.906955] usbcore: registered new device driver usb <4>[ 1.907448] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator <4>[ 1.908440] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests <4>[ 1.908947] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator <4>[ 1.909627] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests <6>[ 1.914190] i2c i2c-0: IMX I2C adapter registered <6>[ 1.929038] i2c i2c-1: IMX I2C adapter registered <6>[ 1.933863] i2c i2c-2: IMX I2C adapter registered <6>[ 1.935482] mc: Linux media interface: v0.10 <6>[ 1.935649] videodev: Linux video capture interface: v2.00 <6>[ 1.936363] pps_core: LinuxPPS API ver. 1 registered <6>[ 1.936398] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 1.936482] PTP clock support registered <6>[ 1.938639] Advanced Linux Sound Architecture Driver Initialized. <6>[ 1.944355] Bluetooth: Core ver 2.22 <6>[ 1.944527] NET: Registered protocol family 31 <6>[ 1.944561] Bluetooth: HCI device and connection manager initialized <6>[ 1.944702] Bluetooth: HCI socket layer initialized <6>[ 1.944756] Bluetooth: L2CAP socket layer initialized <6>[ 1.944958] Bluetooth: SCO socket layer initialized <6>[ 1.947921] clocksource: Switched to clocksource mxc_timer1 <5>[ 3.396988] VFS: Disk quotas dquot_6.6.0 <6>[ 3.397230] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>[ 3.436471] NET: Registered protocol family 2 <6>[ 3.437352] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) <6>[ 3.440929] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 22528 bytes, linear) <6>[ 3.441522] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) <6>[ 3.441725] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear) <6>[ 3.442979] TCP: Hash tables configured (established 8192 bind 8192) <6>[ 3.443882] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) <6>[ 3.444131] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) <6>[ 3.444955] NET: Registered protocol family 1 <6>[ 3.448040] RPC: Registered named UNIX socket transport module. <6>[ 3.448159] RPC: Registered udp transport module. <6>[ 3.448196] RPC: Registered tcp transport module. <6>[ 3.448230] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 3.450242] PCI: CLS 0 bytes, default 64 <6>[ 3.451733] Trying to unpack rootfs image as initramfs... <6>[ 4.687619] Freeing initrd memory: 9924K <4>[ 4.689997] hw perfevents: no interrupt-affinity property for /pmu, guessing. <6>[ 4.691002] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available <5>[ 4.698494] Initialise system trusted keyrings <6>[ 4.699652] workingset: timestamp_bits=30 max_order=18 bucket_order=0 <5>[ 4.728371] NFS: Registering the id_resolver key type <5>[ 4.728596] Key type id_resolver registered <5>[ 4.728718] Key type id_legacy registered <6>[ 4.729113] nfs4filelayout_init: NFSv4 File Layout Driver Registering... <6>[ 4.729234] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... <6>[ 4.729455] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. <6>[ 4.731632] fuse: init (API version 7.32) <5>[ 4.827888] Key type asymmetric registered <5>[ 4.828093] Asymmetric key parser 'x509' registered <6>[ 4.828466] bounce: pool size: 64 pages <6>[ 4.828625] io scheduler mq-deadline registered <6>[ 4.828664] io scheduler kyber registered <4>[ 4.839382] pwm-backlight backlight: supply power not found, using dummy regulator <4>[ 4.860424] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 <4>[ 4.860558] imx-sdma 20ec000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin <6>[ 4.874075] pfuze100-regulator 1-0008: Full layer: 2, Metal layer: 1 <6>[ 4.875065] pfuze100-regulator 1-0008: FAB: 0, FIN: 0 <6>[ 4.875104] pfuze100-regulator 1-0008: pfuze100 found. <6>[ 4.905172] VGEN6: Bringing 3300000uV into 2800000-2800000uV <6>[ 4.913889] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 33, base_baud = 5000000) is a IMX <6>[ 5.906084] printk: console [ttymxc0] enabled <6>[ 5.916865] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 77, base_baud = 5000000) is a IMX <6>[ 5.926574] serial serial0: tty port ttymxc1 registered <6>[ 5.935127] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 78, base_baud = 5000000) is a IMX <6>[ 5.979342] imx-ipuv3 2400000.ipu: IPUv3H probed <6>[ 5.994615] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops) <6>[ 6.003043] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops) <6>[ 6.011393] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops) <6>[ 6.019622] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops) <6>[ 6.029022] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with HDCP (DWC HDMI 3D TX PHY) <6>[ 6.046641] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops) <6>[ 6.055263] imx-drm display-subsystem: bound ldb (ops imx_ldb_ops) <6>[ 6.066654] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 0 <6>[ 6.132538] Console: switching to colour frame buffer device 100x30 <6>[ 6.151717] imx-drm display-subsystem: [drm] fb0: imx-drmdrmfb frame buffer device <6>[ 6.160304] imx-ipuv3 2800000.ipu: IPUv3H probed <6>[ 6.204457] brd: module loaded <6>[ 6.260300] loop: module loaded <6>[ 6.285469] CAN device driver interface <6>[ 6.302605] pps pps0: new PPS source ptp0 <6>[ 6.352786] fec 2188000.ethernet eth0: registered PHC device 0 <6>[ 6.362767] usbcore: registered new interface driver r8152 <6>[ 6.368773] usbcore: registered new interface driver lan78xx <6>[ 6.374898] usbcore: registered new interface driver asix <6>[ 6.380771] usbcore: registered new interface driver ax88179_178a <6>[ 6.387270] usbcore: registered new interface driver cdc_ether <6>[ 6.393631] usbcore: registered new interface driver smsc95xx <6>[ 6.399838] usbcore: registered new interface driver net1080 <6>[ 6.405905] usbcore: registered new interface driver cdc_subset <6>[ 6.412284] usbcore: registered new interface driver zaurus <6>[ 6.418314] usbcore: registered new interface driver MOSCHIP usb-ethernet driver <6>[ 6.426207] usbcore: registered new interface driver cdc_ncm <6>[ 6.432206] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 6.439066] ehci-pci: EHCI PCI platform driver <6>[ 6.443942] ehci-mxc: Freescale On-Chip EHCI Host driver <6>[ 6.450874] usbcore: registered new interface driver usb-storage <4>[ 6.470665] edt_ft5x06 2-0038: supply vcc not found, using dummy regulator <4>[ 6.480786] rtc-ds1307 2-0068: SET TIME! <6>[ 6.491499] rtc-ds1307 2-0068: registered as rtc0 <6>[ 6.499453] rtc-ds1307 2-0068: setting system clock to 2000-01-01T00:00:18 UTC (946684818) <6>[ 6.499466] input: generic ft5x06 (79) as /devices/platform/soc/2100000.bus/21a8000.i2c/i2c-2/2-0038/input/input0 <6>[ 6.516097] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc1 <6>[ 6.526295] i2c /dev entries driver <6>[ 6.547145] Bluetooth: HCI UART driver ver 2.3 <6>[ 6.551981] Bluetooth: HCI UART protocol H4 registered <6>[ 6.557559] Bluetooth: HCI UART protocol LL registered <6>[ 6.568768] sdhci: Secure Digital Host Controller Interface driver <6>[ 6.575246] sdhci: Copyright(c) Pierre Ossman <6>[ 6.579948] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 6.589289] sdhci-esdhc-imx 2194000.mmc: Got CD GPIO <6>[ 6.594984] caam 2100000.crypto: Entropy delay = 3200 <6>[ 6.625000] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA <6>[ 6.626032] mmc2: SDHCI controller on 2198000.mmc [2198000.mmc] using ADMA <4>[ 6.650214] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIInit_11.8.32.bts failed with error -2 <4>[ 6.660806] hci-ti serial0-0: Falling back to sysfs fallback for: ti-connectivity/TIInit_11.8.32.bts <6>[ 6.661247] caam 2100000.crypto: Instantiated RNG4 SH0 <4>[ 6.683861] mmc1: host does not support reading read-only switch, assuming write-enable <6>[ 6.698799] mmc1: new high speed SDHC card at address aaaa <6>[ 6.708746] mmcblk1: mmc1:aaaa SL16G 14.8 GiB <6>[ 6.708965] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA <6>[ 6.722018] caam 2100000.crypto: Instantiated RNG4 SH1 <6>[ 6.722824] mmc2: new DDR MMC card at address 0001 <6>[ 6.726901] mmcblk1: p1 p2 <6>[ 6.727548] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4) <4>[ 6.728963] sdhci-esdhc-imx 2190000.mmc: card claims to support voltages below defined range <6>[ 6.735192] mmcblk2: mmc2:0001 8GME4R 7.28 GiB <6>[ 6.735712] caam 2100000.crypto: job rings = 2, qi = 0 <6>[ 6.743826] mmcblk2boot0: mmc2:0001 8GME4R partition 1 4.00 MiB <6>[ 6.751511] mmc0: new high speed SDIO card at address 0001 <6>[ 6.757416] mmcblk2boot1: mmc2:0001 8GME4R partition 2 4.00 MiB <6>[ 6.781549] mmcblk2rpmb: mmc2:0001 8GME4R partition 3 512 KiB, chardev (243:0) <6>[ 6.785814] caam algorithms registered in /proc/crypto <6>[ 6.796534] mmcblk2: p1 p2 <6>[ 6.800407] caam 2100000.crypto: registering rng-caam <5>[ 6.928644] random: crng init done <6>[ 6.933599] usbcore: registered new interface driver usbhid <6>[ 6.939554] usbhid: USB HID core driver <6>[ 6.948392] ipu1_csi0: Registered ipu1_csi0 capture as /dev/video0 <6>[ 6.956735] ipu1_ic_prpenc: Registered ipu1_ic_prpenc capture as /dev/video1 <6>[ 6.965130] ipu1_ic_prpvf: Registered ipu1_ic_prpvf capture as /dev/video2 <6>[ 6.973998] ipu1_csi1: Registered ipu1_csi1 capture as /dev/video3 <6>[ 6.981989] ipu2_csi0: Registered ipu2_csi0 capture as /dev/video4 <6>[ 6.989414] ipu2_ic_prpenc: Registered ipu2_ic_prpenc capture as /dev/video5 <6>[ 6.997572] ipu2_ic_prpvf: Registered ipu2_ic_prpvf capture as /dev/video6 <6>[ 7.006099] ipu2_csi1: Registered ipu2_csi1 capture as /dev/video7 <4>[ 7.044215] fsl-ssi-dai 202c000.ssi: No cache defaults, reading back from HW <6>[ 7.062278] NET: Registered protocol family 10 <6>[ 7.072430] Segment Routing with IPv6 <6>[ 7.076530] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver <6>[ 7.085700] NET: Registered protocol family 17 <6>[ 7.090584] can: controller area network core <6>[ 7.095490] NET: Registered protocol family 29 <6>[ 7.100345] can: raw protocol <6>[ 7.103818] can: broadcast manager protocol <6>[ 7.108426] can: netlink gateway - max_hops=1 <5>[ 7.113709] Key type dns_resolver registered <6>[ 7.121842] vddpu: supplied by SW1C <5>[ 7.129841] Registering SWP/SWPB emulation handler <5>[ 7.135603] Loading compiled-in X.509 certificates <3>[ 7.312259] vddarm: bypassed regulator has no supply! <3>[ 7.317885] vddarm: failed to get the current voltage: -EPROBE_DEFER <6>[ 7.324660] vddarm: supplied by SW1AB <3>[ 7.332759] vddsoc: bypassed regulator has no supply! <3>[ 7.338243] vddsoc: failed to get the current voltage: -EPROBE_DEFER <6>[ 7.344953] vddsoc: supplied by SW1C <6>[ 7.373952] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) <6>[ 7.381042] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) <6>[ 7.387899] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) <6>[ 7.393870] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 <6>[ 7.401481] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 <6>[ 7.408082] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 <6>[ 7.414478] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 <6>[ 7.423815] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 1 <4>[ 7.448967] imx_usb 2184200.usb: No over current polarity defined <6>[ 7.460874] ci_hdrc ci_hdrc.1: EHCI Host Controller <6>[ 7.466613] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 <6>[ 7.497971] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 <6>[ 7.505676] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 <6>[ 7.514536] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.522125] usb usb1: Product: EHCI Host Controller <6>[ 7.527299] usb usb1: Manufacturer: Linux 5.10.135-cip13 ehci_hcd <6>[ 7.533739] usb usb1: SerialNumber: ci_hdrc.1 <6>[ 7.543722] hub 1-0:1.0: USB hub found <6>[ 7.548454] hub 1-0:1.0: 1 port detected <6>[ 7.574406] imx-media: Registered ipu_ic_pp csc/scaler as /dev/video8 <6>[ 7.634340] imx_thermal 20c8000.anatop:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C <6>[ 7.654724] input: gpio-keys as /devices/platform/gpio-keys/input/input1 <6>[ 7.753554] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:07: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet-1:07, irq=POLL) <6>[ 10.890471] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx <6>[ 10.918301] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready <5>[ 10.947851] Sending DHCP requests ., OK <6>[ 10.992415] IP-Config: Got DHCP answer from 10.201.1.3, my address is 10.201.4.154 <6>[ 11.000553] IP-Config: Complete: <6>[ 11.004117] device=eth0, hwaddr=f8:dc:7a:10:9b:1e, ipaddr=10.201.4.154, mask=255.255.0.0, gw=10.201.1.3 <6>[ 11.014465] host=10.201.4.154, domain=, nis-domain=(none) <6>[ 11.020771] bootserver=10.201.1.3, rootserver=10.201.1.3, rootpath= <6>[ 11.020810] nameserver0=10.1.1.1 <5>[ 11.037024] cfg80211: Loading compiled-in X.509 certificates for regulatory database <5>[ 11.107028] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' <4>[ 11.116565] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 <6>[ 11.117869] ALSA device list: <4>[ 11.125610] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db <6>[ 11.129015] #0: dt6-customboard-audio <6>[ 11.146206] Freeing unused kernel memory: 1024K <6>[ 11.239195] Run /init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: <30>[ 11.640323] udevd[213]: starting version 3.2.9 <27>[ 11.662979] udevd[213]: specified user 'tss' unknown <27>[ 11.669072] udevd[213]: specified group 'tss' unknown <30>[ 11.685244] udevd[214]: starting eudev-3.2.9 <4>[ 12.606326] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2 <4>[ 12.615700] coda 2040000.vpu: Falling back to sysfs fallback for: vpu_fw_imx6q.bin <4>[ 13.452581] wl18xx_driver wl18xx.3.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2 <4>[ 13.463669] wl18xx_driver wl18xx.3.auto: Falling back to sysfs fallback for: ti-connectivity/wl1271-nvs.bin done Saving random seed: OK Starting network: ip: RTNETLINK answers: File exists FAIL Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-2318484/environment . /lava-2318484/environment / # /lava-2318484/bin/lava-test-runner /lava-2318484/0 /lava-2318484/bin/lava-test-runner /lava-2318484/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-2318484/0/tests/0_dmesg + cat uuid + UUID=2318484_1.5.2.4.1<8>[ 14.626639] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh <8>[ 14.742886] <8>[ 14.845297] <8>[ 14.958745] + set +x <8>[ 14.970548] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-2318484/environment / # . /lava-2318484/environment/lava-2318484/bin/lava-test-runner /lava-2318484/1 / # /lava-2318484/bin/lava-test-runner /lava-2318484/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-2318484/1/tests/1_bootrr + cat uuid + UUID=2318484_1.5.2.4.5<8>[ 15.609599] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-2318484/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-2318484/1/../bin/lava-test-case <8>[ 16.760884] /lava-2318484/1/../bin/lava-test-case <8>[ 16.876669] /lava-2318484/1/../bin/lava-test-case <8>[ 16.935915] + set +x <8>[ 16.977529] / #