connecting to NetworkSerialPort(target=Target(name='imx6ul-pico-hobbit-0', env=None), name='NetworkSerialPort', state=, avail=True, host='moxa.cuskci.stw.pengutronix.de', port=4007, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t moxa.cuskci.stw.pengutronix.de:4007 connected to 10.8.254.5 (port 4007) Escape character: Ctrl-\ Type the escape character to get to the prompt. barebox 2017.10.1-00009-gbc5d99d030 #1 Wed Nov 1 17:19:43 CET 2017 Board: Technexion Pico i.MX6UL Board detected i.MX6 UltraLite revision 1.0 mdio_bus: miibus0: probed imx-usb 2184200.usb: USB EHCI 1.00 imx-esdhc 2190000.usdhc: registered as 2190000.usdhc imx-esdhc 2194000.usdhc: registered as 2194000.usdhc netconsole: registered as netconsole-1 malloc space: 0x8fefca40 -> 0x9fdf947f (size 255 MiB) mmc0: detected MMC card version 5.1 mmc0: registered mmc0.boot0 mmc0: registered mmc0.boot1 mmc0: registered mmc0 running /env/bin/init... [?25h Hit m for menu or any other key to stop autoboot: 3 type exit to get to the menu [1;32mbarebox@[1;36mTechnexion Pico i.MX6UL Board:/[0m bootm -v -r /mnt/tftp/799822/tftp-deploy-7k0x9b4q/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/799822/tftp-deploy-7k0x9b4q/dtb/imx6ul-pico-hobbit.dtb /mnt/tftp/799822/tftp-deploy-7k0x9b4q/kernel/zImage [1;32mbarebox@[1;36mTechnexion Pico i.MX6UL Board:/[0m bootm -v -r /mnt/tftp/799822/tftp-deploy-7k0x9b4q/ramdisk/ramdisk.cpio.gz -o /mnt/tftp/799822/tftp-deploy-7k0x9b4q/dtb/imx6ul-pico-hobbit.dtb /mnt/tftp/799822/tftp-deploy-7k0x9b4q/kernel/zImage warning: No MAC address set. Using random address e6:47:3c:e2:97:f9 eth1: 100Mbps full duplex link detected T DHCP client bound to address 10.8.254.54 Loading ARM Linux zImage '/mnt/tftp/799822/tftp-deploy-7k0x9b4q/kernel/zImage' OS image not yet relocated Passing control to ARM zImage handler no OS load address, defaulting to 0x82e19000 no initrd load address, defaulting to 0x83852000 Loaded initrd GZIP compressed '/mnt/tftp/799822/tftp-deploy-7k0x9b4q/ramdisk/ramdisk.cpio.gz' initrd is at 0x83852000-0x847a1285 Loading devicetree from '/mnt/tftp/799822/tftp-deploy-7k0x9b4q/dtb/imx6ul-pico-hobbit.dtb' mmc0: Cannot find nodepath /soc/aips-bus@02100000/usdhc@02190000, cannot fixup Failed to fixup node in of_partition_fixup+0x1/0x1f8: Invalid argument commandline: console=ttymxc5,115200n8 Starting kernel at 0x82e19000, initrd at 0x83852000, oftree at 0x847a2000... Starting kernel in secure mode [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.137-cip14 (KernelCI@build-j70184-arm-gcc-10-multi-v7-defconfig-sjdvs) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Tue Aug 23 02:20:23 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: TechNexion PICO-IMX6UL and HOBBIT baseboard [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x9b800000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff] [ 0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttymxc5,115200n8 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 413152K/524288K available (13312K kernel code, 2230K rwdata, 5340K rodata, 2048K init, 424K bss, 45600K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000062] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.007458] Console: colour dummy device 80x30 [ 0.007569] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.007618] pid_max: default: 32768 minimum: 301 [ 0.007994] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.008034] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.009555] CPU: Testing write buffer coherency: ok [ 0.010305] CPU0: update cpu_capacity 1024 [ 0.010343] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.012043] Setting up static identity map for 0x80300000 - 0x803000ac [ 0.014601] rcu: Hierarchical SRCU implementation. [ 0.020549] EFI services will not be available. [ 0.021012] smp: Bringing up secondary CPUs ... [ 0.021051] smp: Brought up 1 node, 1 CPU [ 0.021080] SMP: Total of 1 processors activated (48.00 BogoMIPS). [ 0.021100] CPU: All CPU(s) started in SVC mode. [ 0.022157] devtmpfs: initialized [ 0.035334] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.035872] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.035928] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.040533] pinctrl core: initialized pinctrl subsystem [ 0.044298] DMI not present or invalid. [ 0.046427] NET: Registered protocol family 16 [ 0.051108] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.056425] thermal_sys: Registered thermal governor 'step_wise' [ 0.056621] cpuidle: using governor menu [ 0.264682] vdd3p0: supplied by regulator-dummy [ 0.276846] cpu: supplied by regulator-dummy [ 0.289470] vddsoc: supplied by regulator-dummy [ 0.677933] No ATAGs? [ 0.678999] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.679037] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.687713] imx6ul-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver [ 0.698174] Serial: AMBA PL011 UART driver [ 0.760767] mxs-dma 1804000.dma-apbh: initialized [ 0.774636] iommu: Default domain type: Translated [ 0.775543] vgaarb: loaded [ 0.777821] SCSI subsystem initialized [ 0.779113] usbcore: registered new interface driver usbfs [ 0.779249] usbcore: registered new interface driver hub [ 0.779367] usbcore: registered new device driver usb [ 0.782670] i2c i2c-0: IMX I2C adapter registered [ 0.784996] i2c i2c-1: IMX I2C adapter registered [ 0.786061] imx-i2c 21a8000.i2c: can't get pinctrl, bus recovery not supported [ 0.787981] i2c i2c-2: IMX I2C adapter registered [ 0.791064] pps_core: LinuxPPS API ver. 1 registered [ 0.791099] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.791158] PTP clock support registered [ 0.800773] clocksource: Switched to clocksource mxc_timer1 [ 3.022656] NET: Registered protocol family 2 [ 3.023245] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 3.025130] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 3.025229] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 3.025343] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.025504] TCP: Hash tables configured (established 4096 bind 4096) [ 3.025724] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.025794] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.026180] NET: Registered protocol family 1 [ 3.027904] RPC: Registered named UNIX socket transport module. [ 3.027946] RPC: Registered udp transport module. [ 3.027970] RPC: Registered tcp transport module. [ 3.027990] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.028022] PCI: CLS 0 bytes, default 64 [ 3.028966] Trying to unpack rootfs image as initramfs... [ 6.049480] Freeing initrd memory: 15680K [ 6.050515] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 6.054230] Initialise system trusted keyrings [ 6.055252] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 6.071130] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 6.073113] NFS: Registering the id_resolver key type [ 6.073369] Key type id_resolver registered [ 6.073396] Key type id_legacy registered [ 6.073680] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 6.073709] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 6.073800] ntfs: driver 2.1.32 [Flags: R/O]. [ 6.074984] Key type asymmetric registered [ 6.075023] Asymmetric key parser 'x509' registered [ 6.075151] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 6.075179] io scheduler mq-deadline registered [ 6.075202] io scheduler kyber registered [ 6.127001] pwm-backlight backlight: supply power not found, using dummy regulator [ 6.179852] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 [ 6.179911] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 6.303379] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 6.313737] SuperH (H)SCI(F) driver initialized [ 6.316237] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 69, base_baud = 5000000) is a IMX [ 6.318450] 21fc000.serial: ttymxc5 at MMIO 0x21fc000 (irq = 70, base_baud = 5000000) is a IMX [ 7.031500] printk: console [ttymxc5] enabled [ 7.038970] msm_serial: driver initialized [ 7.043854] STMicroelectronics ASC driver initialized [ 7.053059] STM32 USART driver initialized [ 7.079720] panel-simple panel: supply power not found, using dummy regulator [ 7.087403] panel-simple panel: Specify missing connector_type [ 7.118564] brd: module loaded [ 7.139580] loop: module loaded [ 7.178042] CAN device driver interface [ 7.184836] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 7.195825] pps pps0: new PPS source ptp0 [ 7.275481] fec 20b4000.ethernet eth0: registered PHC device 0 [ 7.284876] e1000e: Intel(R) PRO/1000 Network Driver [ 7.289875] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 7.296105] igb: Intel(R) Gigabit Ethernet Network Driver [ 7.301594] igb: Copyright (c) 2007-2014 Intel Corporation. [ 7.320329] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 7.328015] usbcore: registered new interface driver pegasus [ 7.333901] usbcore: registered new interface driver asix [ 7.339411] usbcore: registered new interface driver ax88179_178a [ 7.345700] usbcore: registered new interface driver cdc_ether [ 7.351726] usbcore: registered new interface driver smsc75xx [ 7.357596] usbcore: registered new interface driver smsc95xx [ 7.363504] usbcore: registered new interface driver net1080 [ 7.369259] usbcore: registered new interface driver cdc_subset [ 7.375334] usbcore: registered new interface driver zaurus [ 7.381196] usbcore: registered new interface driver cdc_ncm [ 7.394833] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.401512] ehci-pci: EHCI PCI platform driver [ 7.406096] ehci-platform: EHCI generic platform driver [ 7.412128] ehci-orion: EHCI orion driver [ 7.416654] SPEAr-ehci: EHCI SPEAr driver [ 7.421268] ehci-st: EHCI STMicroelectronics driver [ 7.426632] ehci-exynos: EHCI Exynos driver [ 7.431390] ehci-atmel: EHCI Atmel driver [ 7.435836] tegra-ehci: Tegra EHCI driver [ 7.440361] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.446734] ohci-pci: OHCI PCI platform driver [ 7.451407] ohci-platform: OHCI generic platform driver [ 7.457297] SPEAr-ohci: OHCI SPEAr driver [ 7.461886] ohci-st: OHCI STMicroelectronics driver [ 7.467210] ohci-atmel: OHCI Atmel driver [ 7.473818] usbcore: registered new interface driver usb-storage [ 7.498398] i2c /dev entries driver [ 7.549057] sdhci: Secure Digital Host Controller Interface driver [ 7.555422] sdhci: Copyright(c) Pierre Ossman [ 7.566102] Synopsys Designware Multimedia Card Interface Driver [ 7.576789] sdhci-pltfm: SDHCI platform and OF driver helper [ 7.601979] ledtrig-cpu: registered to indicate activity on CPUs [ 7.610633] usbcore: registered new interface driver usbhid [ 7.616385] usbhid: USB HID core driver [ 7.636069] NET: Registered protocol family 10 [ 7.643301] Segment Routing with IPv6 [ 7.647181] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 7.654733] NET: Registered protocol family 17 [ 7.659237] can: controller area network core [ 7.663879] NET: Registered protocol family 29 [ 7.668349] can: raw protocol [ 7.671431] can: broadcast manager protocol [ 7.675656] can: netlink gateway - max_hops=1 [ 7.681191] Key type dns_resolver registered [ 7.689516] ThumbEE CPU extension supported. [ 7.694003] Registering SWP/SWPB emulation handler [ 7.700013] Loading compiled-in X.509 certificates [ 7.738776] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA [ 7.747617] pwm-backlight backlight: supply power not found, using dummy regulator [ 7.760092] panel-simple panel: supply power not found, using dummy regulator [ 7.767798] panel-simple panel: Specify missing connector_type [ 7.797644] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 7.802719] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 7.843747] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 7.852748] hub 1-0:1.0: USB hub found [ 7.856700] mmc1: SDHCI controller on 2194000.mmc [2194000.mmc] using ADMA [ 7.864622] hub 1-0:1.0: 1 port detected [ 7.875561] imx_thermal 20c8000.anatop:tempmon: Industrial CPU temperature grade - max:105C critical:100C passive:95C [ 7.889144] pwm-backlight backlight: supply power not found, using dummy regulator [ 7.902029] panel-simple panel: supply power not found, using dummy regulator [ 7.909579] panel-simple panel: Specify missing connector_type [ 7.918979] pwm-backlight backlight: supply power not found, using dummy regulator [ 7.931865] panel-simple panel: supply power not found, using dummy regulator [ 7.939385] panel-simple panel: Specify missing connector_type [ 7.955760] Freeing unused kernel memory: 2048K [ 7.967701] mmc0: new DDR MMC card at address 0001 [ 7.974081] Run /init as init process [ 7.978723] mmcblk0: mmc0:0001 M62704 3.56 GiB [ 7.988646] mmcblk0boot0: mmc0:0001 M62704 partition 1 2.00 MiB [ 7.996883] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 8.006587] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 8.012659] mmcblk0boot1: mmc0:0001 M62704 partition 2 2.00 MiB [ 8.031051] mmcblk0rpmb: mmc0:0001 M62704 partition 3 512 KiB, chardev (235:0) [ 8.039733] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 8.054810] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 8.061173] mmcblk0: p1 p2 [ 8.081593] pwm-backlight backlight: supply power not found, using dummy regulator [ 8.097815] panel-simple panel: supply power not found, using dummy regulator [ 8.105514] panel-simple panel: Specify missing connector_type Starting syslogd: OK [ 8.245102] mmc1: new high speed SDIO card at address 0001 Starting klogd: OK Running sysctl: OK Populating /dev using udev: [ 8.406644] udevd[91]: starting version 3.2.9 [ 8.413699] random: udevd: uninitialized urandom read (16 bytes read) [ 8.420677] random: udevd: uninitialized urandom read (16 bytes read) [ 8.428144] random: udevd: uninitialized urandom read (16 bytes read) [ 8.453539] udevd[91]: specified user 'tss' unknown [ 8.458807] udevd[91]: specified group 'tss' unknown [ 8.481193] udevd[92]: starting eudev-3.2.9 [ 11.841024] pwm-backlight backlight: supply power not found, using dummy regulator [ 11.853629] panel-simple panel: supply power not found, using dummy regulator [ 11.861332] panel-simple panel: Specify missing connector_type [ 12.854820] pwm-backlight backlight: supply power not found, using dummy regulator [ 12.945378] panel-simple panel: supply power not found, using dummy regulator [ 12.953084] panel-simple panel: Specify missing connector_type [ 13.604054] caam 2140000.crypto: Entropy delay = 3200 [ 13.669936] caam 2140000.crypto: Instantiated RNG4 SH0 [ 13.730718] caam 2140000.crypto: Instantiated RNG4 SH1 [ 13.735889] caam 2140000.crypto: device ID = 0x0a16030000000000 (Era 8) [ 13.742554] caam 2140000.crypto: job rings = 3, qi = 0 [ 13.762039] pwm-backlight backlight: supply power not found, using dummy regulator [ 13.774676] panel-simple panel: supply power not found, using dummy regulator [ 13.782350] panel-simple panel: Specify missing connector_type [ 14.483634] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 14.718577] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 14.766465] sgtl5000 1-000a: Using internal LDO instead of VDDD: check ER1 erratum [ 14.874876] pwm-backlight backlight: supply power not found, using dummy regulator [ 14.949641] panel-simple panel: supply power not found, using dummy regulator [ 14.957374] panel-simple panel: Specify missing connector_type [ 15.744799] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 15.751861] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 15.760507] cfg80211: failed to load regulatory.db [ 15.869839] pwm-backlight backlight: supply power not found, using dummy regulator [ 15.904071] panel-simple panel: supply power not found, using dummy regulator [ 15.911750] panel-simple panel: Specify missing connector_type [ 15.923764] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430a0-sdio for chip BCM43430/0 [ 15.989809] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430a0-sdio.bin failed with error -2 [ 16.013180] pwm-backlight backlight: supply power not found, using dummy regulator [ 16.055645] panel-simple panel: supply power not found, using dummy regulator [ 16.063432] panel-simple panel: Specify missing connector_type [ 17.051106] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ 17.423877] caam algorithms registered in /proc/crypto [ 17.433448] caam 2140000.crypto: caam pkc algorithms registered in /proc/crypto [ 17.441041] caam 2140000.crypto: registering rng-caam [ 17.456976] pwm-backlight backlight: supply power not found, using dummy regulator [ 17.472474] panel-simple panel: supply power not found, using dummy regulator [ 17.480023] panel-simple panel: Specify missing connector_type [ 17.529694] pwm-backlight backlight: supply power not found, using dummy regulator [ 17.547549] panel-simple panel: supply power not found, using dummy regulator [ 17.555254] panel-simple panel: Specify missing connector_type done Saving random seed: [ 17.631019] random: crng init done OK Starting network: OK Starting dropbear sshd: OK /bin/sh: can't access tty; job control turned off / # / # # # / # export SHELL=/bin/sh export SHELL=/bin/sh / # . /lava-799822/environment . /lava-799822/environment / # /lava-799822/bin/lava-test-runner /lava-799822/0 /lava-799822/bin/lava-test-runner /lava-799822/0 + export 'TESTRUN_ID=0_dmesg' + cd /lava-799822/0/tests/0_dmesg + cat uuid + UUID=799822_1.5.2.3.1[ 18.478337] + set +x + KERNELCI_LAVA=y /bin/sh /opt/kernelci/dmesg.sh [ 18.557489] [ 18.629016] [ 18.700477] + set +x [ 18.712409] / # # export SHELL=/bin/sh # / # export SHELL=/bin/sh. /lava-799822/environment / # . /lava-799822/environment/lava-799822/bin/lava-test-runner /lava-799822/1 / # /lava-799822/bin/lava-test-runner /lava-799822/1 + export 'TESTRUN_ID=1_bootrr' + cd /lava-799822/1/tests/1_bootrr + cat uuid + UUID=799822_1.5.2.3.5[ 19.254988] + set +x + export 'PATH=/opt/bootrr/helpers:/lava-799822/1/../bin:/sbin:/usr/sbin:/bin:/usr/bin' + cd /opt/bootrr + sh helpers/bootrr-auto /lava-799822/1/../bin/lava-test-case [ 20.347647] /lava-799822/1/../bin/lava-test-case [ 20.414853] /lava-799822/1/../bin/lava-test-case [ 20.453749] + set +x [ 20.482580] / #